-
PYLE Audio PLCD69 - page 1
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Ster eo Radio • Digital Compact Disc Player • Automatically Memory Storing • Hiding Panel • Pr eset Equalization • Auxiliary Input Function • Remote Conr ol PLCD69 ...
-
PYLE Audio PLCD69 - page 2
2 Installation ..................................................................................................... 3 DIN Front-Mount (Method A) .................................................................................. 3 Installing the unit ............................................................................................... 3 R ...
-
PYLE Audio PLCD69 - page 3
3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . • Use only the parts included with the unit to ensure pr oper ...
-
PYLE Audio PLCD69 - page 4
4 INST ALLA TION Removing the unit 1. Frame 2. Release Frame Key Insert the release frame key into the groove at the right side of the frame, then prize out to remove the frame. (Y ou can also use the key to r emove the frame from the left side.) 3. Release Unit Key After releasing the frame, insert the release unit keys supplied with the accessory ...
-
PYLE Audio PLCD69 - page 5
5 3. Then insert a disc in the disc slot, the panel will automatically turn up to State 2. Press (eject) button again, the panel will turn down to eject the disc. If you don ’ t insert a disc in again, the panel will automatically turn up about 10 seconds. If you don ’ t want to wait, press (eject) button, the panel will also turn up. 4. When l ...
-
PYLE Audio PLCD69 - page 6
6 WIRING CONNECTION GREEN GREEN/BLACK GREY GREY/BLACK VIOLET VIOLET/BLACK MAIN UNIT WHITE WHITE/BLACK FRONT Lch SPEAKER REAR Lch SPEAKER FRONT Rch SPEAKER REAR Rch SPEAKER Rch RED Lch WHITE (GREY) REAR RCA CABLE Rch RED Lch WHITE (BROWN) FRONT RCA CABLE ANTENNA CONNECT OR RED BLUE POWER ANTENNA GROUND (B – ) MEMORY BACK-UP IGNITION SWITCH (B+) SU ...
-
PYLE Audio PLCD69 - page 7
7 GENERAL OPERA TION • ON/OFF When the hiding panel turns up (in State 2), press button (9) to turn on the unit. When system is on, press button (9) to turn off the unit. • SOUND ADJUSTMENT Press SEL button (10) to select the desired adjustment mode. The adjustment mode will change in OPERA TION the following order: By pressing volume up button ...
-
PYLE Audio PLCD69 - page 8
• SET THE CLOCK Press the DSP button (15), and the clock is shown on the display . Then hold down the button until the clock flashes. Then press the MANU/SKIP button (17) to change hours or MANU/SKIP button (16) to change minutes. • SELECT MODE Press MOD button (6) to choose desired listening mode. (e.g. radio mode to CD mode to AUX IN mode) ? ...
-
PYLE Audio PLCD69 - page 9
9 • AUTOMA TICALL Y MEMOR Y STORING & PROGRAM SCANNING - Automatic Memory Storing Press AMS button (18) for several seconds, the radio searches fr om the current fr equency and checks the signal strength level until one cycle search is finished. And then 6 strongest stations ar e stored into the corr esponding preset number button. - Program ...
-
PYLE Audio PLCD69 - page 10
10 CD OPERA TION • CD OPEN/CLOSE/EJECT When the front panel is in State 2 and the unit is on, press (eject) button (4), the panel will change into State 3 and display the disc slot (5). Then insert a disc into the slot, the panel will automatically turn up. Press (eject) button (4) again to eject the disc. And after about 10 seconds, the panel wi ...
-
PYLE Audio PLCD69 - page 11
OPERA TION REMOTE CONTROL HANDSET FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP = Display Button 3. SEL = Select Button 4. VOL = V olume Up Button 5. VOL = V olume Down Button 6. BND = Band Select Button 7. MOD = Mode Button 8. TUNE/SEEK = T une/Seek Down Button 9. TUNE/SEEK = T une/Seek Up Button 10. AMS = Automatic Storing & ...
-
PYLE Audio PLCD69 - page 12
GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 60 Watts Current Drain : 15 Ampere (max.) CD PLA YER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 50 dB ...
-
PYLE Audio PLCD69 - page 13
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not movin ...
-
PYLE Audio PLCD69 - page 14
...
-
PYLE Audio PLCD69 - page 15
...
-
PYLE Audio PLCD69 - page 16
88-C1731-05 www .pyleaudio.com ...
PYLE Audio PLCD69についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPYLE Audio PLCD69の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPYLE Audio PLCD69で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。