-
Fisher PLC-XU07N - page 1
Owner's Man ual PLC-XU07N Multimedia Pr ojector MODEL ...
-
Fisher PLC-XU07N - page 2
2 INFORMA TION T O THE USER NO T E : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to pro vide reasonable protection against har mful interf erence when the equipment is operated in a commercial environment. This equipment generates , ...
-
Fisher PLC-XU07N - page 3
3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no ...
-
Fisher PLC-XU07N - page 4
4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 16 COMPUTER MODE 24 VIDEO MODE 30 SETTING 32 APPENDIX 33 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 POSITIONING THE PROJECTOR 8 ADJUSTABLE FEET 8 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJECTOR 9 CONNECTING THE PR OJECT OR 10 TERMINA ...
-
Fisher PLC-XU07N - page 5
5 FEA TURES AND DESIGN This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector is compatible with many different types ...
-
Fisher PLC-XU07N - page 6
6 PREP ARA TION NAME OF EA CH P AR T OF THE PROJECT OR This Air Intake Vent should not be blocked. BO TT OM OF THE CABINET B ACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken. ● Do not put a flammable object near this part. Keep h ...
-
Fisher PLC-XU07N - page 7
7 PREP ARA TION SETTING-UP THE PR OJECT OR POSITIONING THE PR OJECT OR ROOM LIGHT The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by twisting ADJUSTABLE FEET. Projection angle ca ...
-
Fisher PLC-XU07N - page 8
8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least one meter away from any object. ● Make sure that there is no object under the projector. An obstacle under the projector may prevent the projector from taking the cooling air through the bottom vent slot. This projector is equipped cooling fans for protection from ov ...
-
Fisher PLC-XU07N - page 9
9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. ● Replace the lens cover and rotate the feet fully clockwise (to shorten the feet) when moving the projector to prevent damage to the cabinet. NOTE The carrying bag (supplied) is intended for protection from dust and scratches on the surface of the cabinet, an ...
-
Fisher PLC-XU07N - page 10
▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R–AUDIO–L S-VIDEO 10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR Connect the computer output to this terminal. (Refer to P12 ~15.) When controlling the computer with the Remote Control of this projector, connect the mouse port to this connector. (Refe ...
-
Fisher PLC-XU07N - page 11
11 CONNECTING THE PR OJECT OR ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING T O THE VIDEO EQ UIPMENT Satellite TV Turner Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable ✽ ( ...
-
Fisher PLC-XU07N - page 12
12 CONNECTING THE PR OJECT OR CONNECTING T O THE IBM-COMP A TIBLE COMPUTER To connect with the IBM-compatible computer, refer to the figure below. IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable (supplied) Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Serial Cable ✽ (refer to P10.) Control Cab ...
-
Fisher PLC-XU07N - page 13
13 B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING THE PR OJECT OR To disconnect MOUSE CABLE, 1. Hold the portion (B) of the connector with one hand. 2. Pull the portion (A) to the arrow direction and remove connector. CONTROL PORT AUDIO OUT AUDIO IN MONITOR OUT COMPUTER IN SERIAL ...
-
Fisher PLC-XU07N - page 14
14 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTION T O THE MA CINT OSH COMPUTER To connect with the Macintosh computer, refer to the figure below. MACINTOSH COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for ADB Port ✽ Audio Cable ✽ (ster ...
-
Fisher PLC-XU07N - page 15
B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT VIDEO R-AUDIO-L S-VIDEO (MONO) ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 3 4 5 6 OFF OFF ON ON ON ON 21" MODE (1152 x 870) 15 CONNECTING THE PR ...
-
Fisher PLC-XU07N - page 16
16 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL This remote control unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.) Wireless mouse is usable when PC mouse pointer is displayed on the screen, the wireless ...
-
Fisher PLC-XU07N - page 17
17 BEFORE OPERA TION Remote Contr ol Batteries Installation 1 2 3 Slide the lid upward. Press the lid downward and slide it. For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment. Remove the battery compartment lid. Slide the batteries into the compartment. Replace the compartment lid. Opera ...
-
Fisher PLC-XU07N - page 18
18 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS LAMP REPLACE LAMP W ARNING TEMP . READ Y MODE A UTO IMA GE NORMAL MENU V OLUME SELECT FOCUS ZOOM ON-OFF Used to select zoom adjust. (Refer to P22.) Used to active or terminate the MENU operation. (Refer to P19.) MENU BUTTON MODE BUTTON AUTO IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OF ...
-
Fisher PLC-XU07N - page 19
19 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by pressin ...
-
Fisher PLC-XU07N - page 20
20 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P24) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P27) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P25) SETTING MENU Used to set the Dis ...
-
Fisher PLC-XU07N - page 21
21 B ASIC OPERA TIONS T urning on the Pr ojector Connect the projector's AC power cord into a wall outlet. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Pre ...
-
Fisher PLC-XU07N - page 22
22 B ASIC OPERA TION ADJUSTING THE PICTURE ZOOM Adjustment 1 Press ZOOM / button on the Remote Control Unit or ZOOM ▲ / ▼ button on the Top Control to turn into the ZOOM mode. 2 Press ZOOM or ▲ button to have the image larger, and press ZOOM or ▼ button to have the smaller. Zoom The message disappears after 4 seconds. FOCUS Adjustment 1 Pre ...
-
Fisher PLC-XU07N - page 23
23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND ADJUST Menu will appear. B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Top Control or on the Remote Control Unit) to adjust the volume. The ...
-
Fisher PLC-XU07N - page 24
24 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Press the MODE button on the Top Control or the Remote Control Unit. The input source is selected among COMPUTER or VIDEO. The “Computer” or “Vid ...
-
Fisher PLC-XU07N - page 25
25 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector. If this happens, the projector cannot reproduce a proper image and the ...
-
Fisher PLC-XU07N - page 26
26 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 165 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 ...
-
Fisher PLC-XU07N - page 27
27 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to ▲ or ▼ of the item that ...
-
Fisher PLC-XU07N - page 28
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to ...
-
Fisher PLC-XU07N - page 29
29 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button. Another dialog box PICTURE POSITION Menu will appear. Sel ...
-
Fisher PLC-XU07N - page 30
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE Direct Operation Press the MODE button on the Top Control or the Remote Control Unit. The input source is selected among VIDEO or COMPUTER. The “Video” or “Computer” dis ...
-
Fisher PLC-XU07N - page 31
31 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to ▲ or ▼ of the item that yo ...
-
Fisher PLC-XU07N - page 32
32 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT butt ...
-
Fisher PLC-XU07N - page 33
33 APPENDIX OPERA TING WIRELESS MOUSE Installation The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT buttons and two CLICK buttons are used for wireless mouse operation. Wireless mouse is usable when PC mouse pointer is displayed on the screen. When the menu or indicator o ...
-
Fisher PLC-XU07N - page 34
34 CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you don't use the projector, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 Follow t ...
-
Fisher PLC-XU07N - page 35
35 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least 45 minutes. Rem ...
-
Fisher PLC-XU07N - page 36
36 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 10 ~ 15. 2. Check cable connection. Verify that all computer, video and power cord are ...
-
Fisher PLC-XU07N - page 37
37 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find that service is ...
-
Fisher PLC-XU07N - page 38
38 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.48 lbs (4.3 kg) 8.46" x 4.29" ...
-
Fisher PLC-XU07N - page 39
39 OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MC12SRL ● Control Cable for ADB Port Type No. : POA-MC12MAC ● MAC Adapter Type No. : POA-MACAP ...
-
Fisher PLC-XU07N - page 40
1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. Subjec ...
Fisher PLC-XU07Nについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもFisher PLC-XU07Nの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFisher PLC-XU07Nで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。