-
Nortel Networks 893-862-B - page 1
March 1996 *893-862-B* Bay Networks, Inc. Corporate Headquarters 4401 Great America Parkway Santa Clara, CA 95054 8 Federal Street Billerica, MA 01821 Using the Ba yStac k Ethernet Fiber Media Adapter s 893-862-B SMF MDA Page -1 Monday, September 30, 1996 1:32 PM ...
-
Nortel Networks 893-862-B - page 2
© 1996 by Bay Networks, Inc. All rights reserved. T rademarks Bay Networks, BayStack, and Bay Networks Press are trademarks of Bay Networks, Inc. Other brand and product names are registered trademarks or trademarks of their respectiv e holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reli ...
-
Nortel Networks 893-862-B - page 3
893-862-B 1 Introduction This guide describes the Bay Networks 10B ASE-FL (fiber link) and single-mode fiber media adapters for the BayStack 10B ASE-T Hubs, and provides instructions for installing, connecting, and configuring the adapters in the hub . Each BayStack fiber media adapter provides one nonredundant single- or multimode fiber port ...
-
Nortel Networks 893-862-B - page 4
2 893-862-B BayStac k 10B ASE-FL Media Adapter The BayStack 10B ASE-FL Media Adapter is a modular 10B ASE-FL fiber link port. It is designed to be installed in either media adapter slot of a BayStack 10B ASE-T Hub. The port is compatible with the IEEE 802.3 10B ASE-FL specification for Ethernet running ov er 62.5/125 µ m or 50/125 µ m multimode ...
-
Nortel Networks 893-862-B - page 5
893-862-B 3 BayStac k Single Mode Fiber Media Adapter The BayStack Single Mode Fiber Media Adapter is a modular port supporting 10B ASE-F signaling. It is designed to be installed in the media adapter slot of any BayStack 10B ASE-T Hub. The port conforms to Bay Networks proprietary standards for Ethernet running ov er 9/125 µ m single-mode fiber ...
-
Nortel Networks 893-862-B - page 6
4 893-862-B Fiber Optic Cable Length Limitations The 10B ASE-F standard permits you to use fiber optic cables up to 2000 meters long. Howe ver , the fiber connection must meet: • Optical power b udget • Ethernet repeater rules For more information about simple rules for Ethernet network compliance, refer to Using the BayStack 10BASE-T Hubs . ...
-
Nortel Networks 893-862-B - page 7
893-862-B 5 T able 2 lists the most common cable and connector combinations for the 10B ASE-FL media adapter, assuming the maximum permitted attenuation with ST connectors. The table lists the maximum (total) distance allowed in the fiber connection. Howe ver , your fiber connection may ha ve to be shorter to meet the optical power b udget and Et ...
-
Nortel Networks 893-862-B - page 8
6 893-862-B BayStac k Single Mode Fiber Media Adapter The optical power b udget for the single-mode fiber media adapter is shown in T able 1 . Power loss in the link cannot e xceed the value for the type of fiber optic cable you are using. Only in-line fiber-to-fiber connections (a connection between two fibers terminated with fiber connector ...
-
Nortel Networks 893-862-B - page 9
893-862-B 7 Installing a Media Adapter in a BayStac k Hub A BayStack 10B ASE-FL media adapter is installed in a slot on the front of the BayStack 10B ASE-T Hub. T o install a media adapter , follow these steps: 1. Unplug the BayStack 10B ASE-T Hub power cord from the A C power source. 2. Remove the filler panel fr om the media adapter slot on the ...
-
Nortel Networks 893-862-B - page 10
8 893-862-B 6. V erify the installation f or the media adapter. Observe for the installed media adapter that the respecti ve Media Adapter LEDs on the front panel of the hub light according to T able 4. For more information about interpreting media adapter LEDs, refer to Chapter 1, “Quick Reference Information, ” in Using the BayStack 10BASE-T ...
-
Nortel Networks 893-862-B - page 11
893-862-B 9 Bay Networks, Inc. One-year Limited Hardwar e W arranty Bay Networks warrants this hardware product will be free from defects in material and workmanship for a period of one (1) year under normal operating conditions from the date of original purchase. Should you discover a defect in material or w orkmanship within this warranty period, ...
-
Nortel Networks 893-862-B - page 12
10 893-862-B Electromagnetic Emissions Meets requirements of: FCC Part 15, Class A Digital De vices VCCI Class 1 ITE EN 55 022 (CISPR 22, Class B) General License Vfg 243 (Class B) Compliance with the VCCI regulation is dependent upon the use of shielded A C power cables. The user is responsible for procuring the appropriate cables. Compliance with ...
Nortel Networks 893-862-Bについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもNortel Networks 893-862-Bの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNortel Networks 893-862-Bで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。