Graco 204490の取扱説明書

20ページ 2.3 mb
ダウンロード

ページに移動 of 20

Summary
  • Graco 204490 - page 1

    Instr uctions T opper Units 306556S EN Grease dispense unit with pneumatic pump eleva tor f or easy drum replacement. For prof essional use onl y . Model 226013 50:1 Ratio Fire-B all ® Pump 5000 psi (34 .5 MP a , 345 bar) Maximum W orking Pres- sure 100 PSI (0. 68 MP a, 6.89 bar ) Maximu m Air Pressure Model 226018 50:1 Ratio President ® Pu mp 40 ...

  • Graco 204490 - page 2

    2 306556S Contents W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pressure Relie f Procedure . . . . . . . . . . . . . . . . . 5 T ypical Installation . . . . . . . . . ...

  • Graco 204490 - page 3

    Warnings 306556S 3 Wa r n i n g s The f ollowing warnings are f or the setup , use, g rounding, maintenance, and repair of this equipment. Th e e xclama- tion point symbol ale r ts you to a gene ral w arning and the hazard symbols ref er to procedure-specific risks . When these symbols appear in the bod y of this manual or on w arning labels, ref e ...

  • Graco 204490 - page 4

    Warnings 4 306556S T O XIC FLU ID HAZARD Hazardous fluid or to xic fumes can cause ser ious injury or death if splashed in the e ye s or on the skin, inhaled, or s wallo wed. • Know the specific hazards of the fluid you are us ing. • Store hazardou s fluid in an appro ved containe r . Dispose of hazardous flui d according to all local, state, a ...

  • Graco 204490 - page 5

    Installation 306556S 5 Installation Gr ounding • Pump : Use a ground wire and clamp as shown in Fig 1. • Air and fluid h oses: Use only electrically conductiv e hoses. • Air Compressor : F ollow manuf acturer’ s reco mmen- dations . • Spra y fun and dispensin g v alve: Gr ound throug h connection to a properly gro unded fluid hose and pum ...

  • Graco 204490 - page 6

    Installation 6 306556S T ypical Installation The T ypical Installation (sho wn in fig 2) is only a guide f or selecting and installing this system. It is not an actual system design. Con tact y our local Gr aco representativ e f o r assistance in de signing a syst em to suit your par t icu- lar needs . P ositioning the Elev ator 1. P osition the el ...

  • Graco 204490 - page 7

    Installation 306556S 7 Mounting the Pump Models 226013, 226018, 244637 1. Mount the pump sup por t brac ket (86 ). (F IG . 4) 2. Remove inductor plate nut (11 or 2 4), locking ring (8 or 23) and o-ring (9). (F IG . 5) 3. In order , slide inductor pl ate nut (11 or 2 4 ), loc king ring (8 or 23) and o-ring (9) on pum p riser tube. (F IG . 5) 4. Adju ...

  • Graco 204490 - page 8

    Installation 8 306556S All Models Ref er to F IG . 7 for the f ollowing Steps . 4. Loosen the pump su ppor t clamps again and r aise the suppor t (64) un til it meets the pump base. 5. Secure the Presiden t or Fire-Ball p u mp to the pump suppor t mounting plat es from the underside with the screws (68). 6. Tighten scre ws (68) on lower pu mp brack ...

  • Graco 204490 - page 9

    Installation 306556S 9 8. Install a b leed-type master air v alve on the pump’ s air supply line. 9. Install a fluid shutoff v alve on the fluid supply line to shut off fluid to the pump. 10. Finish assemb ling the hoses and fittings as shown on P ar ts Drawing P age 16. ...

  • Graco 204490 - page 10

    Operation 10 306556S Operation Installing a Drum Ref er to F IG . 9 for the f ollowing instru ctions. 1. Relie v e the pressure, se e Pressure Relief Proce- dure, page 5. 2. Close the ball v alve (65). The h andle will be a t a 90° angle to the valve body . 3. Open the b leed-type master air v alve (F). 4. Open the inductor pla t e v ent by t urni ...

  • Graco 204490 - page 11

    Operation 306556S 11 Remo ving a Drum 1. Relive pressure, see Pressure Relief Proce dure, page 5. 2. Press in and hold the air-as sist v alv e (47) until the inductor plate rises abov e the drum. Release the va lve . ( F IG . 9) 3. Open the snap-over v alve (27) a nd raise the elev a - tor to full height. (F IG . 9) NO TE: If you lose air pressure ...

  • Graco 204490 - page 12

    Maintenance 12 306556S Maintenance Ref er to F IG . 10 f or ref erence numbers . NO TE: T o av oid contaminating the fluid in the supply container , k eep the pump intak e and the induct or plate clean during the servicing operations. Place the par ts on clean paper or r ags. Remo ving the Pump 1. Reliev e Pressure, see Pressure Relief Procedure , ...

  • Graco 204490 - page 13

    Troubleshooting 306556S 13 T r oubleshooting Prob lem Cause Solution Low f low or air suck ed into pump or under indu ctor plate. 1. Open inductor plate v ent 2. Loose inductor plate slee ve lock- ing nut 3. Worn indu ctor seals 1. Close the inductor plate . 2. Tighten the loc king nuts. 3. Replace seals; See P ar ts Dra w- ing P age 16. F ailure o ...

  • Graco 204490 - page 14

    Parts 14 306556S Pa r t s Model 204490 Elev ator and Inductor Plate Asse mbl y Includes items 17, 25, 90, and 101 Model 226013 Pump, Elev ator , and Inducto r Plate Assembly Includes items 1, 25, 89, 90, 9 1 and 10 1 Model 226018 Pump, Elev ator , and Inducto r Plate Assembly Includes items 21, 25, 90, 97, 10 1, and 106 Model 2446 37 Pump, Elev ato ...

  • Graco 204490 - page 15

    Parts 306556S 15 Ref No. 1: P ar t No. 204353 Inductor Plate Assembly: 400 lb Drum size Fits 50:1 Fire-Ball In-Line Pump; Includes items 2-16 Ref No. 17: P a rt No. 204405 Inductor Plate Assembly: 400 lb Drum size Fits Monarch and Presiden t In-Line Pumps Includes items 3 - 7, 10, 12 - 16, 18 - 20 Ref No. 21: P a rt No. 205699 Inductor Plate Assemb ...

  • Graco 204490 - page 16

    Parts 16 306556S aa 0731 0729 0730 Ref. No. 27 Snap-Over V alve Assembly Includes items 28 to 40 Ref. No. 42 Restrictor V alve Assembly Includes items 43 to 46 Ref. No. 47 Air Assist V alve Assembly Includes items 48 to 60 43 46 44 45 1/8 npt 29 36 28 40 37 32 35 39 31 34 33 38 30 3/8 npt 52 51 60 50 49 56 59 55 48 58 54 57 53 64 62 78 1/4 npt 47 4 ...

  • Graco 204490 - page 17

    Parts 306556S 17 Ref No. 25: P ar t No. 204461 Wishbone Suppor t Assembl y Ref No. P a rt No. Description Qty . 27 202295 SNAP-O VER V AL VE ASSEMBL Y Includes items 28 - 40 28 100272 LOCKW ASHER, int. shkprf , No. 6 1 29 104560 SCREW , ov al hd, 6-32 3/8” 1 30 154519 KNOB 1 31 154526 W ASHER 1 32 154570 W ASHEr 1 33 154594 O-RING, buna-N 1 34 15 ...

  • Graco 204490 - page 18

    Parts 18 306556S Ref No. 91: P ar t No. 204467 Fire-Ball Delivery Hose Kit Includes items 92 - 94, 96, and 115 Ref No. 97: P ar t No. 205102 President Delivery Hose Kit Includes items 94, 96, 98, 99, and 110 Dimensions Ref No. Part No. Description Qty . 92 100206 BUSHING, 1/2 npt(m) x 1/4 npt(f) 1 93 109150 HOSE, fl uid, cpld 1/4 npt(m) ), 1/4” ( ...

  • Graco 204490 - page 19

    Technical Data 306556S 19 Te c h n i c a l D a t a See the pump instruction manual f or T echnical Data including W etted P ar ts, P or t Sizes , and so on. . T opper Units US Metric Maximum fluid w or king pressure 50:1 Ratio Fire-Ball Pump 5000 psi 34.5 MP a, 345 bar 50:1 Ratio Pr esident Pump 4000 psi 28 MP a, 280 bar 75:1 Ratio President Pump 4 ...

  • Graco 204490 - page 20

    All written and visual data con tained in th is document reflects the late st product information available at the time of pu blica tion. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/pate nts. Original instructions. This manual contains English. MM 306556 Graco Headquarters: Minneapo ...

メーカー Graco カテゴリー Marine Sanitation System

Graco 204490のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 204490の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 204490の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 204490の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 204490の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 204490のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 204490の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 204490デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 204490を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 204490ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 204490の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 204490の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 204490に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 204490デバイスの基本機能を使うにあたってのヒント。 Graco 204490のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 204490に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 204490のメーカー/サービスへの連絡先に関する情報。

Graco 204490についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 204490の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 204490で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)