Sanyo VCB-3444の取扱説明書

18ページ 0.24 mb
ダウンロード

ページに移動 of 18

Summary
  • Sanyo VCB-3444 - page 1

    INSTRUCTION MANUAL VCB-3444 B/W CCD Camera ...

  • Sanyo VCB-3444 - page 2

    Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If you need help with installation and/or settings, please consult your dealer. CONTENTS INFORMATION TO USER .................................................................... 2 PRECAUTIONS ........................... ...

  • Sanyo VCB-3444 - page 3

    Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This installation should be made by a qualified service person and should conform to all local codes. ...

  • Sanyo VCB-3444 - page 4

    PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For ...

  • Sanyo VCB-3444 - page 5

    PARTS NAMES 1 Power indicator (POWER) Comes on when the power to the camera is on. 2 Camera setup section • Internal sync ( INT )/Line lock ( LL ) setting • Electronic iris ( EI )/Auto iris ( AI ) setting • Backlight compensation ( BLC ) setting • Automatic gain control ( AGC ) setting 3 Line phase adjustment volume (PHASE) When using two c ...

  • Sanyo VCB-3444 - page 6

    PARTS NAMES F Flange-back lock screw G Lens mount cap The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). H Camera installation bracket The bracket can be fixed at the top or bottom of the camera. A Camera mounting screw hole: 1/4"-20 UNC CAUTION: When installing the cam ...

  • Sanyo VCB-3444 - page 7

    PARTS NAMES Concerning auto-iris lenses DC type auto-iris lens A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is referred to as DC type coil lens or DC type non-amplifier lens. (Set the Auto-iris lens switch to the DC position.) VIDEO type auto-iris lens A lens with amplifier circuit that ope ...

  • Sanyo VCB-3444 - page 8

    MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). Checking the lens mount Do not use a lens if length “ L ” is more than 9 mm. If not, that may damage the camera and prevent proper installation. 1 Remove the lens mount cap from the camera. 2 Install the auto-iris lens. CS mount type lens Carefully align the lens mount wit ...

  • Sanyo VCB-3444 - page 9

    MOUNTING THE LENS Rewiring the lens cable in the lens iris plug 1 Prepare the lens cable. Cut th e cable at the plug, th en remove appr ox. 8 mm of th e cable shea th and strip about 2 mm f rom ea c h wire. 2 Install the lens iris plug. Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close ...

  • Sanyo VCB-3444 - page 10

    CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Conn e ct to 2 4 V A C UL l isted class 2 po wer supply (sol d separate ly). CAUTION: • To prevent camera and/or power ...

  • Sanyo VCB-3444 - page 11

    SETTINGS Camera setup section • Internal sync (INT)/Line lock (LL) setting • Electronic iris (EI)/Auto iris (AI) setting • Backlight compensation (BLC) setting • Automatic gain control (AGC) setting Iris function setting Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the EI/AI switch to EI position. ? ...

  • Sanyo VCB-3444 - page 12

    SETTINGS Lens iris adjustment If using a DC type auto-iris lens, you will need to set the LEVEL volume when shooting in the conditions described below. L (counterclockwise): To decrease the contrast H (clockwise): To increase the contrast • If shooting simultaneously in a dark room and through a bright window. • If the subject background is ext ...

  • Sanyo VCB-3444 - page 13

    SETTINGS High speed electronic shutter setting Normally, the speed setting switch for the high speed electronic shutter set to the 0 position. This se ts the elect ronic shut ter speed to 1/6 0 sec. The switch can be set as indicated in table A to select one of the 8 speeds available. CAUTION: • When using the high speed electronic shutter, the E ...

  • Sanyo VCB-3444 - page 14

    TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not p erform correctly, please consult your dealer or a Sanyo Authorized Service Centre. No picture on the monitor screen • Is the power turne d o n t o all con nected devi ces? Is the volta ge correct? • Are ...

  • Sanyo VCB-3444 - page 15

    SPECIFICATIONS Scanning system : EIA standard (525 TV lines, 30 frames/sec.) Interlace : 2:1 interlace Image device : 1/ 3 inch soli d state image device CCD Picture elements : 542 (H) x 494 (V) Effective picture elements : 512 (H) x 492 (V) Synchronizing system : Internal sync (INT), Line lock (LL) manually switchable Resolution : 400 TV lines hor ...

  • Sanyo VCB-3444 - page 16

    SPECIFICATIONS Dimensions Features and specifications are subject to change without prior notice or obligations. ACCESSORIES 1 Lens iris plug (4-pin) .................................................................. 1 pc. 2 Hexagonal wrench .................................................................... 1 pc. 12 29 11 7 135 123 1/4”–20 UN ...

  • Sanyo VCB-3444 - page 17

    SANYO INDUSTRIAL VIDEO B/W VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty . The names and addresses of Authorized Sanyo Service Centers may be obtained ...

  • Sanyo VCB-3444 - page 18

    1AC6P1P2433-- L73Q4/US(0501KP-TVS) 98230002 21605 Plummer Street, Chatsworth, California 91311 Printed in Taiwan L73Q 4/US GB 2001 , 6, 1 8 ...

メーカー Sanyo カテゴリー Security Camera

Sanyo VCB-3444のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VCB-3444の取扱説明書
- Sanyoの製品カード
- パンフレット
- またはSanyo VCB-3444の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sanyo VCB-3444の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sanyo VCB-3444の取り付け説明書、サービスマニュアル、簡易説明書、またはSanyo VCB-3444のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sanyo VCB-3444の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sanyo VCB-3444デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSanyo VCB-3444を使用するのを助ける技術的文書のことです。説明書は通常、全てのSanyo VCB-3444ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sanyoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sanyo VCB-3444の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSanyo VCB-3444の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sanyo VCB-3444に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sanyo VCB-3444デバイスの基本機能を使うにあたってのヒント。 Sanyo VCB-3444のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sanyo VCB-3444に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSanyo VCB-3444のメーカー/サービスへの連絡先に関する情報。

Sanyo VCB-3444についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSanyo VCB-3444の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSanyo VCB-3444で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)