-
Miele EGW 3060-10 - page 1
Operating and installation instructions Plate warmer EGW 3060-10 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 241 630 e n-G B ...
-
Miele EGW 3060-10 - page 2
Guide to the appliance .............................................3 Warning and Safety instructions .....................................4 Caring for the environment ..........................................8 Before using for the first time ........................................9 Cleaning and heating up for the first time ..................... ...
-
Miele EGW 3060-10 - page 3
a On/Off switch (lights up) b Temperature control c Warming drawer d Anti-slip mat e In-operation indicator f Warning sticker (Caution: Danger of burning on the heating element) Guide to the appliance 3 ...
-
Miele EGW 3060-10 - page 4
This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on installation, safet ...
-
Miele EGW 3060-10 - page 5
Safety with children ~ This appliance is only intended for use by adults who have read these instructions. The appliance is not a toy! To avoid the risk of injury, keep children away from it at all times, and do not let them play with it or use the controls. They will not understand the potential dangers posed by it. They should be supervised whene ...
-
Miele EGW 3060-10 - page 6
~ This appliance may be connected via a fused plug and switched socket. If you wish to connect it to a fused spur connection unit, or if the appliance is supplied without a plug, it must be installed and connected by a suitably qualified and competent person in strict accordance with current local and national safety regulations. The manufacturer c ...
-
Miele EGW 3060-10 - page 7
Correct use ~ Depending on the temperature selected and the length of time the appliance is being used, the inside of the drawer can get extremely hot during use, and remain hot for some time after being switched off. ~ For added protection, it is advisable to use heat-resistant pot holders or gloves when using the appliance. Do not let them get da ...
-
Miele EGW 3060-10 - page 8
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Rather than just thr ...
-
Miele EGW 3060-10 - page 9
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning and heating up for the first time ^ Remove any protective foil and sticky labels. ^ Remove the anti-slip mat from the drawer, and clean it with warm water and a little wa ...
-
Miele EGW 3060-10 - page 10
Do not use the appliance to re-heat, cook or keep food or drinks warm. Condensation from the food or drinks could lead to corrosion in the appliance. Always use oven gloves to remove heated crockery from the drawer. The load bearing capacity of the appliance is 15 kg maximum. The base of the drawer is fitted with an anti-slip mat which stops crocke ...
-
Miele EGW 3060-10 - page 11
Operation ^ Place the crockery inside the drawer. ^ Select the temperature required. ^ Switch on the appliance ( j ). The switch lights up. ^ Close the drawer. Switch the appliance off ( k ) before removing the heated crockery. Pull the drawer out to its full extent before unloading it. Selecting a temperature The temperature dial allows you to sel ...
-
Miele EGW 3060-10 - page 12
Heating up times Various factors will affect the heating up times: – The material and thickness of the crockery – Maximum capacity – How the crockery is arranged – The temperature setting. It is therefore not possible to state precise times. However, the following information can be used as a guide: At a temperature setting of approx. 50 ° ...
-
Miele EGW 3060-10 - page 13
Capacity The quantity that can be loaded will depend to a great extent on the type and size of your own crockery. Example – 25 Cappuccino cups, C 88 mm or – 56 Espresso cups, C 60 mm Place cups and glasses upside down in the drawer so that they warm through thoroughly. The maximum load bearing capacity of the appliance is 15 kg. Operation 13 ...
-
Miele EGW 3060-10 - page 14
Under no circumstances use a steam cleaning appliance to clean this appliance. The steam could attack the electrical components and cause a short circuit. Only use domestic washing-up liquid to clean this appliance; commercial cleaning products are not suitable, and may damage the appliance. Appliance front and interior Remove any soiling immediate ...
-
Miele EGW 3060-10 - page 15
To avoid damaging the surface of your appliance, do not use: – cleaning agents containing soda, ammonia, acids or chlorides, – cleaning agents containing descaling agents, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, – solvent-based cleaning agents, – stainless steel cleaning agents, – dishwasher cleaner, – ove ...
-
Miele EGW 3060-10 - page 16
, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Wh ...
-
Miele EGW 3060-10 - page 17
. . . the crockery does not heat up. Check whether – the mains fuse has tripped. If any of the following problems occur, please contact the Miele Service Department. . . . The crockery is too hot. The temperature control is faulty. . . . the On/Off switch does not light up when the appliance is switched on. The indicator light for the switch is d ...
-
Miele EGW 3060-10 - page 18
These can be ordered via the internet at www.miele-shop.com, or from the Miele Customer Contact Centre (see back cover for contact details) or from your Miele dealer. Anti-slip mat Anti-slip mat to keep crockery secure E-Cloth (microfibre cloth) Removes finger marks and light soiling. Optional accessories 18 ...
-
Miele EGW 3060-10 - page 19
~ Before connecting the appliance to the mains supply make sure that the connection data on the data plate (voltage and connected load) correspond with the mains electricity supply, This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt. ~ The socket and on-off switch should ...
-
Miele EGW 3060-10 - page 20
Possible combinations Coffee machine * Appliances with glass front ** Appliances with metal front Steam oven Building-in dimensions 20 ...
-
Miele EGW 3060-10 - page 21
^ Push the appliance into the housing unit as far as the vapour strip and align it. Ensure that the housing unit is aligned at a right angle. ^ Open the drawer, and use the 2 screws supplied to secure the appliance to the side walls of the housing unit. ^ Build in the combination appliance in accordance with its own specific operating and installat ...
-
Miele EGW 3060-10 - page 22
After building in the combination appliance, it may be necessary under certain circumstances to – align the front of the plate warmer – align the gap between the plate warmer and the combination appliance. To help you do this, there are adjusting points underneath the nuts which secure the drawer to the telescopic runners. ^ Loosen the nuts and ...
-
Miele EGW 3060-10 - page 23
All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). If the connection cable is damaged, it must be replaced by a suitably qualified electrician with a specialist connection cable of type H 05 V V-F (pvc insulated), availab ...
-
Miele EGW 3060-10 - page 24
Connection should be made via a suitable switched socket or a double pole fused spur connection unit which complies with national and local safety regulations and the on/off switch should be easily accessible after the appliance has been built in. If the switch is not accessible after installation (depending on country) an additional means of disco ...
-
Miele EGW 3060-10 - page 25
Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most important that this basic safety requirement is present and tested regularly and if there is any doubt the electrical wiring in th ...
-
Miele EGW 3060-10 - page 26
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and ser ...
-
Miele EGW 3060-10 - page 27
27 ...
-
Miele EGW 3060-10 - page 28
Alteration rights reserved/ 0508 M.-Nr. 07 241 630 / 01 ...
Miele EGW 3060-10についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもMiele EGW 3060-10の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMiele EGW 3060-10で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。