-
JBL DVD280 - page 1
OWNER’S GUIDE DVD280 OM 7/12/04 4:41 PM Page 1 ...
-
JBL DVD280 - page 2
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near any heat sources such as radiators, heat r ...
-
JBL DVD280 - page 3
3 DVD280 D VD/CD PLA YER T ypographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear - panel connections, certain conventions have been used. EXAMPLE – (bold type) indicates a specific remote control or front-panel button or indicator , or rear-panel connection jack. EXAMPLE – (OCR type ...
-
JBL DVD280 - page 4
4 INTRODUCTION Thank you for choosing the JBL ® DVD280, a multipurpose DVD player that delivers the highest level of play- back quality from a wide range of optical media formats. Along with conventional DVD-Video and CD audio discs, the DVD280 is also com- patible with CD-R and CD-RW discs, VCD discs and discs recorded with audio files in the Win ...
-
JBL DVD280 - page 5
5 SAFETY INFORMA TION V erify Line V oltage Before Use Y our DVD280 has been designed for use with 230-volt AC current and the plugs are specifically designed for 230-volt applications. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit. Depending on the electrical requi ...
-
JBL DVD280 - page 6
6 Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet. IMPORT ANT NOTE: T o avoid damage to the DVD280 that may not be cov- ered by the warranty , be certain that the disc is removed from the unit before it is moved. Once t ...
-
JBL DVD280 - page 7
7 FEA TURES & DVD COMP A TIBILITY High-Quality Video • Advanced pixel-by-pixel processing using 10-bit MPEG-2 video decoding circuits. • T est-screen signal for testing video performance and setup. • Compatibility with dual-layer , extended-play DVDs. • Playback of JPEG image files. • Progressive Scan component video outputs. High-Qua ...
-
JBL DVD280 - page 8
8 Audio CD Compatibility • 8cm (3") or 12cm (5") discs • Linear PCM digital audio • Audio CDs are divided into tracks CD-R/RW Compatibility • 12cm (5") discs • Linear PCM, MP3 (32kbps – 320kbps) or Windows Media ® WMA (16kbps – 192kbps) digital audio • May contain JPEG still images (up to 5 megapixels, file size up t ...
-
JBL DVD280 - page 9
9 TERMINOLOGY Since they share some of the charac- teristics and technology of CD play- ers, many of the terms and opera- tional concepts used in a DVD player are similar to what you may be famil- iar with from CD players and chang- ers, or older video disc formats such as Laser Disc. However , if this is your first DVD product, some of the terms u ...
-
JBL DVD280 - page 10
10 Reading: This is a message that you will see when you first press the Play Button 5 B . It refers to the fact that the player must first examine the contents of the disc to see whether it is a CD or DVD, and then extract the information about the type of material on the disc, such as languages, aspect ratios, subtitles, number of titles and more ...
-
JBL DVD280 - page 11
11 FRONT -P ANEL CONTROLS VIDEO DVD280 High P erformance DVD/CD Player Standby Dimmer T est 2 3 4 5 Power 1 7 6 8 9 ) ! @# JPEG VCD DVD WMA MP3 PROG RANDOM REPEAT 1 ALL A-B V .OFF TEST P .SCAN TITLE TRACK CHAPTER PBC HOUR MIN SEC Main Power On/Off: Press this switch to apply power to the DVD280. Once the unit has been turned on with this switch ...
-
JBL DVD280 - page 12
12 FRONT -P ANEL INFORMA TION DISPLA Y Q P O N M L KJ I H G F B C JPEG VCD DVD WMA MP3 PROG RANDOM REPEAT 1 ALL A-B V.OFF TEST P.SCAN TITLE TRACK CHAPTER PBC HOUR MIN SEC A D E F F A Disc-T ype Indicators B Playback-Mode Indicators C T itle Number Indicators D Chapter/T rack Number Indicators E T ime Indicators F Hour/Minute/Second Indicators G Pro ...
-
JBL DVD280 - page 13
13 REMOTE CONTROL FUNCTIONS a b c d e f f g h h i j k l m n o ` z y x w v u t s r q p 0 Power On 1 Repeat 2 Playlist 3 Audio 4 Eject 5 Navigation ⁄ / ¤ Buttons 6 Info 7 Navigation ‹ / › Buttons 8 Enter 9 Pause A Skip/Step (Previous) B Play C Search/Slow Reverse D Stop E Video Off F Display Dimmer G Clear H T itle I Nu ...
-
JBL DVD280 - page 14
14 REMOTE CONTROL FUNCTIONS 0 Power On: T urns on the player when it is in Standby mode (the JBL logo appears on-screen). 1 Repeat: Press to go to the Repeat menu. Y ou can repeat a title, chapter , track, programmed playlist or the entire disc. 2 Playlist: Press this button to access the playlist on-screen menu. See page 43 for more information on ...
-
JBL DVD280 - page 15
15 P Search/Slow (Forward): Allows you to search forward through a disc while it is in Play mode. Each time you press this button while a DVD is playing, the search speed changes as below: F . SEARCH 2x ➜ F . SEARCH 16x ➜ F. SEARCH 64x ➜ F . SEARCH 200x ➜ F. SEARCH 2x T wo fast-search speeds are available for VCDs, SVCDs and CDs: 4x and 32x ...
-
JBL DVD280 - page 16
16 REAR-P ANEL CONNECTIONS ™ £ ¢ ∞ § ¶ • ª ‚ ⁄ ¡ NORTHRIDGE , CA, USA DIGITAL AUDIO OUT OPTICAL COAXIAL ANALOG AUDIO OUT L R S-VIDEO Pr/Cr/R Pb/Cb/B Y/Y/G VIDEO VIDEO OUT OUT IN REMOTE CONTROL SCART TV MODEL NO. DVD280 Made in China Maunfactured under license from Dolby Laboratories, "Dolby",and the double-D symbol are tra ...
-
JBL DVD280 - page 17
17 SETUP AND CONNECTIONS • Ensure that the power switch of this unit (and of other equipment to be connected) is set to “Off” before commencing connection. • Do not block the ventilation holes of any of the equipment and arrange them so that air can circulate freely . • Read through the instructions before connecting other equipment. • ...
-
JBL DVD280 - page 18
18 Connecting to a TV Only When using the DVD280 with a televi- sion but no audio receiver or proces- sor , connect it as follows. Either make only the SCART connection å from the DVD280 to the TV , or make the analog audio connection ≠ and one of the video connections (S-video ∫ , composite video ç or component video ∂ ). Remember to plug ...
-
JBL DVD280 - page 19
19 When DVDs encoded in Dolby Digital or DTS are played, the Dolby Digital or DTS bitstream is outputted from the player’ s optical or coaxial digital audio output. When the player is connected to a Dolby Digital or DTS decoder , you can enjoy theater -quality audio in your home. An optical digital audio cable or coaxial audio cable (not supplied ...
-
JBL DVD280 - page 20
20 REMOTE CONTROL OPERA TION Battery Installation Insert the batteries supplied while observing the correct (+) and (–) polarities. Service Life of Batteries • The batteries normally last for about one year , although this depends on how often, and for what operations, the remote control is used. • If the remote control unit fails to work eve ...
-
JBL DVD280 - page 21
21 DIGIT AL A UDIO Optical Digital Audio Connection Notes • Remove the dust protection cap from the optical digital audio output and connect the cable firmly so that the configurations of both the cable and the connector match. • Keep the dust protection cap and always reattach the cap when not using the connector . Audio Output From the Unit? ...
-
JBL DVD280 - page 22
22 SY STEM SETUP The final step of the installation is to establish the system’ s defaults. It is helpful to take a few minutes to famil- iarize yourself with these settings, as they may require change before the first use and later from time to time. Make certain that the DVD280 is properly connected to a video display , and that power is connec ...
-
JBL DVD280 - page 23
23 Figure 5 Select “Off” to turn off subtitles. This setting may be changed later , or using the Subtitle Button on the remote. If the subtitle language is changed using the Subtitle Button , the change will only be effective for that disc. Note that in order for the selected subtitle language to appear , it must be present on the disc. ...
-
JBL DVD280 - page 24
24 select the desired parental control level, use the Navigation ‹ / › Button h to scroll to the “New Password” option and select it by pressing the Enter Button 8 (see Figure 10). Figure 10 Y ou will be prompted to enter the new password (see Figure 11). Figure 11 Y ou will then be prompted to confirm the new password by reentering it (see ...
-
JBL DVD280 - page 25
25 Figure 18 disc in play (see Figures 18 – 20). Y ou may also change the language during disc playback by pressing the Audio Button d , but any changes made will only be effective during playback of that disc. Figure 19 Figure 20 If you are using the Optical ¡ or the Coaxial ™ Digital Audio Output with an audio/video receiver or processor , y ...
-
JBL DVD280 - page 26
26 the DVD280 is connected to a con- ventional (4:3) TV set and you would prefer to see movies without any parts being cut off. Y ou will see the entire frame of the movie, and DVDs recorded with normal 4:3 format will fill the entire screen. But movies in widescreen will occupy a smaller portion of the screen, with black bars at the top and bottom ...
-
JBL DVD280 - page 27
27 Figure 29 The Video Mode setting only affects the Component Video Outputs ∞ . This setting allows the user to com- pensate for errors in the disc authoring where proper maintenance of frame rate was not carried out in the film- to-video conversion process. The DVD280’ s advanced adaptive interlacer will handle most of these types of problems ...
-
JBL DVD280 - page 28
28 DVD is one of the highest quality sources ever made available for in-home playback of prerecorded pictures and sound. In order to make certain that your home theater sys- tem is fully optimized to take advan- tage of DVD’ s superb picture quality , the DVD280 offers a built-in video test signal that makes it easy to calibrate your TV or video ...
-
JBL DVD280 - page 29
29 PLA YBACK BASICS FOR ALL FORMA TS Loading Discs T o load discs in the DVD280, first turn the DVD280 on by pressing in the Main Power On/Off Switch and then pressing the Power On Button 0 . The Power Indicator 2 will turn red when the power is first applied by pressing in the Main Power On/Off Switch . It will turn orange when the Power O ...
-
JBL DVD280 - page 30
30 Basic playback with the DVD280 involves functions similar to those you may be familiar with for conven- tional CD players or changers: • T urn the DVD280 on by first pressing in the Main Power On/Off Switch and then pressing the Power On Button 0 . • If a disc is already in the drawer when the unit is turned on, it will begin playing. If ...
-
JBL DVD280 - page 31
31 Important Notes on DVD Playback The DVD280 is capable of all the fea- tures and options covered by the DVD standards. However , it is up to the producer of a DVD disc to decide which of those features and functions are available on any given disc. For that reason, not all discs will function identically , and some discs will not have many of the ...
-
JBL DVD280 - page 32
32 which may be done only while the disc is in the Stop mode. Y ou may also begin play of a specific T itle, Chapter or T rack by moving the cursor to the list of disc materials in the lower portion of the screen and pressing the Enter Button 8 to select a T itle, and then to select a Chapter or T rack, for play . Normally the Info icon on the left ...
-
JBL DVD280 - page 33
33 representing one program, such as a movie or “Making Of” featurette. It’ s possible for a disc to have only one title. T itles are often divided further into chapters, which makes it easier to locate a specific section of a lengthy movie. For a CD, a list of T racks will be dis- played, each containing a different song. Y ou may view the C ...
-
JBL DVD280 - page 34
34 Figure 59 Figure 60 Slide Shows The DVD280 offers the capability of viewing a “slide show” of images while playing audio simultaneously . Y ou may have noticed that if you insert a disc containing JPEG files, the DVD280 will automatically display the images in order , each image remaining on-screen for about 15 seconds. If you insert a disc ...
-
JBL DVD280 - page 35
35 Figure 68 T o navigate a JPEG disc, you must use the Player Menu of the on-screen menu system (see page 34). The T ime section of the Status Bar display offers a choice of time display modes relating to the disc being played. When this section is high- lighted, press the Navigation ⁄ / ¤ Buttons 57 to select from the following choices: For DV ...
-
JBL DVD280 - page 36
36 While playing a disc, press the Audio Button 3 on the remote control once to see the Audio Display with the current audio language and format (see Figure 73). Scroll to select other languages and/or audio formats. Figure 73 NOTES: • The audio feature only works if the disc was created with multiple audio tracks. • Some DVDs do not not allow ...
-
JBL DVD280 - page 37
37 T o select any Repeat mode (other than Repeat A-B): 1. While a disc is playing, press the Repeat Button 1 on the remote; the Repeat Status Bar appears (see Figure 76). Figure 76 2. Access the Repeat modes by selecting the current setting, scrolling to the desired selection as appropriate for the type of disc you have loaded, and pressing the Ent ...
-
JBL DVD280 - page 38
38 A UDIO CD PLA YBACK When playing audio CDs, your DVD player has the same features as a CD player , including track skip, repeat play and programmed playback. These functions may be programmed using the Player Menu, as described on pages 31–34. Y ou may also access these functions directly using the remote control. Selecting a T rack 1. During ...
-
JBL DVD280 - page 39
39 first press of the Repeat Button b will highlight the Repeat setting at the top of the Player Menu. The next press of the Repeat Button b will change the setting from “Off” to “1” , meaning that the current track will be repeated. The next press will change the setting from “1” to “All” , meaning that the entire disc will be repe ...
-
JBL DVD280 - page 40
40 MP3/WMA PLA YBACK The DVD280 is among the few DVD players that are able to play discs recorded with MP3 or WMA files. This means that you may enjoy the latest music using discs created in your computer through the high- quality audio components in your home theater system. As the way that MP3 and WMA files are recorded on discs differs from the ...
-
JBL DVD280 - page 41
41 All other buttons (including the numeric buttons) will have no function with MP3 playback, except the Playlist Button 2 and Clear Button G , which are needed for programmed playback (see below). NOTES ON MP3 AND WMA PLA YBACK • During playback, the front-panel display and the time indicator on the screen above the list will show the elapsed ti ...
-
JBL DVD280 - page 42
42 VCD PLA YBACK VCD, a format that predates DVD, is based on a different compression for- mat than DVD and a recording method that is similar to CD. Although the DVD has, for the most part, replaced VCD as a format, the DVD280 offers VCD playback so that you may play your existing library of VCD discs. There are two versions of the VCD format: an ...
-
JBL DVD280 - page 43
43 PROGRAMMED PLA Y Programmed Play Programmed play allows you to select any track, title or chapter from a disc, for playback in a specific order . This type of programming is particularly useful for parties or other situations where you desire continu- ous playback of specific selections for a long period of time. Programming play lists is an int ...
-
JBL DVD280 - page 44
44 Cancel Program Play T o cancel Program Play , follow one of these steps: 1. When you open the Disc Drawer 4 , the program will be deleted, and the Playlist line in the Player Menu will return to the default of playing all tracks in the disc’ s order . 2. Stop play and select the Program icon at the top of the list of tracks. Press the icon, an ...
-
JBL DVD280 - page 45
45 DVD LANGU AGE CODES The availability of specific languages for the main audio track or subtitles is dependent on the choices made by a disc’ s producer . Y ou should always consult the disc’ s jacket for information on languages for any disc. In the case of some languages, you may be required to enter a code from the list below to access tha ...
-
JBL DVD280 - page 46
46 TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE SOLUTION Unit does not turn on • Main Power Switch turned off • Press in Main Power Switch . • No AC power • Check AC power plug and make certain any switched outlet is turned on. • Standby pressed within 4 seconds • Press the Standby Switch at least after Mai ...
-
JBL DVD280 - page 47
DVD280 TECHNICAL SPECIFICA TIONS Applicable Disc: Disc formats: 5-inch (12cm) or 3-inch (8cm) DVD-Video, standard conforming DVD-R, DVD+R, DVD-RW , DVD+RW, VCD, SVCD, CD, CD-R, MP3, WMA, JPEG or CD-RW discs Region code: DVD Movie disc with Code shown on rear panel of unit only DVD-Layers: Single Side /Single Layer , Single Side/Dual Layer , Dual Si ...
-
JBL DVD280 - page 48
JBL Consumer Products 250 Crossways Park Drive Woodbury , New Y ork 11797 USA www .jbl.com © 2004 Harman International Industries, Incorporated Part No. 312-AB280000-0010 REV 1 RECYCLABLE ® DVD280 OM 7/12/04 4:42 PM Page 48 ...
JBL DVD280についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもJBL DVD280の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJBL DVD280で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。