Honeywell CM901の取扱説明書

18ページ 0.49 mb
ダウンロード

ページに移動 of 18

Summary
  • Honeywell CM901 - page 1

    CM901 - User Guide 1 day Pr ogrammable Room Thermostat Honeywell Control Systems Ltd. Arlington Business Park, Bracknell Berkshire RG12 1EB T echnical Help Desk: 08457 678999 www .honeywelluk.com 42010943- 1 03 R1 © 2005 Honeywell International Inc. Description The Honeywell CM901 is a programmable r oom thermostat designed to control your heating ...

  • Honeywell CM901 - page 2

    Contents GETTING ST ARTED WITH THE CM901 STEP 1: Installing the Batteries ......................................... 3 STEP 2: Setting the Date and Time................................... 4 STEP 3: Running the Built-In Heating Program ................ 4 PROGRAMMING THE CM901 The Built-in Heating Program............................................ 5 ...

  • Honeywell CM901 - page 3

    3 This section shows you how to setup and run the thermostat in 3 simple steps: STEP 1: Installing the Batteries Note: Please follow the instructions in this section only if the thermostat screen is blank (no symbols or digits are displayed). If the screen displays some infor mation move on to STEP 2: Setting the Date and Time. T o install the Batt ...

  • Honeywell CM901 - page 4

    4 5 STEP 2: Setting the Date and Time T o set the Date and Time: a. Move the slider switch to the D A TE position. ‘SET THE DA Y’ will be displayed on the screen and the day digits will be ashing. b. Use the or buttons to set the correct day . When either of these buttons are pressed ‘DA Y OK?’ will be displayed. Once the correct day is ...

  • Honeywell CM901 - page 5

    4 5 PROGR AMMING THE CM90 1 The Built-in Heating Program The built-in heating program has 6 temperature level changes that can be set between 3.00am and 2.50am - allowing you to maintain the evening temperature after midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C increments. The factory default program fo ...

  • Honeywell CM901 - page 6

    6 7 PROGR AMMING THE CM90 1 b. T o adjust the period start time pr ess the or buttons and ‘TIME 1 OK?’ will be displayed. Holding the button down will change the time quickly . Note: If you ar e pressing the or buttons and the display ashes the next change period, it means the next change will be pushed forward if you continue to press or bu ...

  • Honeywell CM901 - page 7

    6 7 PROGR AMMING THE CM90 1 Disabling / Enabling Time P eriods The thermostat has 6 periods that can be programmed, but you may not need all of these switch points for your heating requirements. Ther efore, any period from 2 to 6 can be disabled or enabled as follows: T o disable time periods: Go to the desired period ( 2 to 6 ) by moving the slide ...

  • Honeywell CM901 - page 8

    8 9 OPERA TING THE CM90 1 Choosing the Operating Mode The ther mostat can operate in three different modes: Automatic, Manual or Off. T o set the operating mode move the slider switch to the desired position. The screen indicates which mode is currently active by displaying A UTO , MAN or OFF . • A UTO (automatic) mode Automatic mode sets the the ...

  • Honeywell CM901 - page 9

    8 9 OPERA TING THE CM90 1 • T emperature Override During normal operation ( AUT O mode) the programmed temperature can be adjusted manually by pressing the or buttons. The ‘target‘ temperature will be displayed and ash for 5 seconds – during this time the or buttons can be used to modify the set value. Note: This temperature override is ...

  • Honeywell CM901 - page 10

    1 0 1 1 FINE TUNING THE CM90 1 Changing the User P arameters The user mode allows you to modify some basic settings of the ther mostat to meet your personal preferences. Y ou can change the time display format (24hr or AM/PM), reset the heating pr ogram to the built-in settings and disable or enable the summer/ winter time change feature. T o chang ...

  • Honeywell CM901 - page 11

    1 0 1 1 FINE TUNING THE CM90 1 c. Now choose which one of the following parameters you would like to change: i) Change the time format ‘CLOCK SELECT’ should be displayed on the screen - press the or buttons to select the preferred time format (12=AM/PM format, 24=24hr format) and the display will ash, indicating a change has been made. T o c ...

  • Honeywell CM901 - page 12

    1 2 1 3 How do I change the batteries on the CM901 when they run out? The ther mostat constantly monitors the batter y power level, which typically last for about 2 years before needing replaced. When the power is running low a ashing symbol will be displayed on the screen. T o change the batteries follow the steps in the above section (‘ STEP ...

  • Honeywell CM901 - page 13

    1 2 1 3 F A Q’ s & TROUBLESHOO TING Can I use my CM901 to contr ol my air -conditioning system? Y es, if your system has been set up correctly you can use your thermostat to contr ol the cooling. T o switch the thermostat between heating and cooling modes press the or buttons together for 5 seconds in any of the product operating modes ( A UT ...

  • Honeywell CM901 - page 14

    1 4 1 5 F A Q’ s & TROUBLESHOO TING What other accessories can I buy that w ork with the CM901? 1. Outside T emperature Sensor Accessory The Outside T emperature Sensor accessory can be tted to your ther mostat to display the outside temperature. By pressing the button twice, the thermostat displays the external temperature. 2. Remote T em ...

  • Honeywell CM901 - page 15

    1 4 1 5 T roub leshooting Guide Symptom CM901 has a blank LCD screen CM901 shows a ashing symbol on the LCD screen The CM901’ s LCD screen works but the heating does not switch on Heating switches ON or OFF too slowly or quickly T emperature swings between too hot and too cold. CM901 shows a ashing symbol on the LCD screen P ossible Cause B ...

  • Honeywell CM901 - page 16

    1 6 1 7 ...an explanation f or householders A programmable room ther mostat is both a programmer and a room thermostat. A programmer allows you to set ‘On’ and ‘Off’ time periods to suit your own lifestyle. A room ther mostat works by sensing the air temperature, switching on the heating when the air temperature falls below the thermostat s ...

  • Honeywell CM901 - page 17

    1 6 1 7 The time on the programmer must be correct. Some types have to be adjusted in spring and autumn at the changes between Greenwich Mean Time and British Summer Time. Y ou may be able to temporarily adjust the heating programme, for example, ‘Override’, ‘Advance’ or ‘Boost’. These are explained in the manufacturer’ s instructions ...

  • Honeywell CM901 - page 18

    1 8 42010943- 1 03 R1 ...

メーカー Honeywell カテゴリー Thermostat

Honeywell CM901のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CM901の取扱説明書
- Honeywellの製品カード
- パンフレット
- またはHoneywell CM901の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Honeywell CM901の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Honeywell CM901の取り付け説明書、サービスマニュアル、簡易説明書、またはHoneywell CM901のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Honeywell CM901の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Honeywell CM901デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHoneywell CM901を使用するのを助ける技術的文書のことです。説明書は通常、全てのHoneywell CM901ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Honeywellの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Honeywell CM901の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHoneywell CM901の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Honeywell CM901に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Honeywell CM901デバイスの基本機能を使うにあたってのヒント。 Honeywell CM901のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Honeywell CM901に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHoneywell CM901のメーカー/サービスへの連絡先に関する情報。

Honeywell CM901についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHoneywell CM901の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHoneywell CM901で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)