日本語 dropdown-ico

Ricoh FV-L030B1の取扱説明書

32ページ 0.67 mb
ダウンロード

ページに移動 of 32

Summary
  • Ricoh FV-L030B1 - page 1

    1/32 FV -L030 B1 User ’s G uide Rev . 1.01 Small Cubic T ype VGA CCD Monochrome PoCL Camera Link Camera FV -L030B1 User ’s Guide RICOH CO MP A NY , L TD. ...

  • Ricoh FV-L030B1 - page 2

    2/32 FV -L030 B1 User ’s G uide Rev . 1.01 T ables o f Content s 1 Connector Specifications ............................... .............................. .................... .............................. .................... .. 3 1.1 Camera Link Connector ................................................. .............................. ........ ...

  • Ricoh FV-L030B1 - page 3

    3/32 FV -L030 B1 User ’s G uide Rev . 1.01 1 Connector Specifications 1.1 Camera Li nk Connect or SDR (3M) or equiva lent This product is a PoCL type. When a frame grabbe r is PoCL compli ant, DO NOT SUPPLY POW ER FROM THE I/O CONNECTOR. When a frame grabbe r is NOT PoCL compliant, supply power from t he I/O connecto r. Pin Assignment Pin No. Sig ...

  • Ricoh FV-L030B1 - page 4

    4/32 FV -L030 B1 User ’s G uide Rev . 1.01 1.2 Power-I/O Connector  HR10A-7R-6PB （ Hirose ） or equivalent  This connector is f or the power supply (12 Vdc) and input /output sig nals.  Use HR10A-7P-6S ( Hirose) or equivalent f or the cable side. Pin Assignment  Input/output signals c an be assigned through the camera setting comm ...

  • Ricoh FV-L030B1 - page 5

    5/32 FV -L030 B1 User ’s G uide Rev . 1.01 2 C amera Output T i ming Chart s 2.1 Normal Mod e (Setting 1 0H: 1XX0X XXX) ※ Clock S peed: 36.8181 MHz （ Normal ） 、 24.5454 MH z （ x2/3 ） 、 12.2727 MH z （ x1/3 ） 2.1.1 Horizont al T iming 1 CLK = 81.4816 ns at 30fps 1 CLK = 40.7408 ns at 60fps 1 CLK = 27.1605 ns at 90fps Normal Full S ...

  • Ricoh FV-L030B1 - page 6

    6/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.1.2 V ertical T iming 2.1.2.1 Normal Full Sc anning (setting 10H: 1XX 00XXX, 1 1H: XX X0X000) 1 H = 63.5556 μ s, 29.9700 Hz at 30fps 1 H = 31.7778 μ s, 59.9400 Hz at 60fps 1 H = 21.1852 μ s, 89.9100 Hz at 90fps 2.1.2.2 Partial Full Sc an ning (setting 10 H : 1X X01XX X, 1 1H: X XX0X000) 1 H = 63.555 ...

  • Ricoh FV-L030B1 - page 7

    7/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.1.2.3 1/2 Partial Scan ning (setting 10H: 1XX 01XXX, 1 1H: XX X0X001) 1 H = 63.5556 μ s, 60.0544 Hz at 30fps 1 H = 31.7778 μ s, 120.108 Hz at 60fps 1 H = 21.1852 μ s, 180.163 Hz at 90fps 2.1.2.4 1/4 Partial Scan ning (setting 10H: 1XX 01XXX, 1 1H: XX X0X010) 1 H = 63.5556 μ s, 120.108 Hz at 30fps 1 ...

  • Ricoh FV-L030B1 - page 8

    8/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.1.2.5 V ariable Partial S canning ( Setting 10H: 1XX01X XX, 1 1H: XXX0X1 1 1) Internal HD Internal VD Video out EXT_TRIG FIX_TRIG (Common) 10 20 30 40 5 0 Exposure time V1 V2 V3 SUB FVAL DVAL LVAL Numbe r of the effective lines [Y] High speed transfer ［ X+a ］ H igh speed transfer ［ f+g-X-Y ］ Bl ...

  • Ricoh FV-L030B1 - page 9

    9/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.2 Binning Mo de (setting 10H: 1X X1XXXX) Binning Full Scanning Binning Partial Full Scanning Binning 1/2 Partial Scanning Binning 1/4 Partial Scanning Clock Speed (MHz) Normal x2/3 x1/3 Normal x2/3 x1/3 Normal x2/3 x1/3 Normal x2/3 x1/3 Frame Rate (Hz) 180.2 120.1 60.1 186.6 124.4 62.2 337.2 224.8 1 12 ...

  • Ricoh FV-L030B1 - page 10

    10/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.2.2 V ertical T iming 2.2.2.1 Binning Full Sc anning (setting 10 H : 1X X10XX X, 1 1H: X XX0X000) 1 H = 63.5556 μ s, 60.0544 Hz at 30fps 1 H = 31.7778 μ s, 120.108 Hz at 60fps 1 H = 21.1852 μ s, 180.163 Hz at 90fps 2.2.2.2 Binning Partia l Full S cann ing (setting 10 H : 1X X1 1XXX, 1 1H: XXX 0X000 ...

  • Ricoh FV-L030B1 - page 11

    1 1/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.2.2.3 Binning 1/2 P artial Scann ing ( setting 10 H: 1XX1 1XXX, 1 1H: XXX 0X001) 1 H = 63.5556 μ s, 1 12.3 78 Hz at 3 0fp s 1 H = 31.7778 μ s, 224.775 Hz at 60fps 1 H = 21.1852 μ s, 337.162 Hz at 90fps 2.2.2.4 Binning 1/4 P artial Scann ing ( setting 10H: 1XX 1 1XXX, 1 1H: XXX 0X010) 1 H = 63.5556 ...

  • Ricoh FV-L030B1 - page 12

    12/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.3 Data Or der on the Ca mera Link Out put DA0 ～ DA9: 10 bit data for one pixel DA0 ～ DA7: 8bit data for one pixe l DA8 DA 5 DA4 DA3 D A2 DA1 D A0 DA9 LVAL FVAL DVAL SP DA6 DA7 X0 X1 X2 X3 XCLK DA1 DA 0 DA9 DA6 DA 7 1TAP10bit NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC DA5 DA 4 DA3 DA2 DA1 D ...

  • Ricoh FV-L030B1 - page 13

    13/32 FV -L030 B1 User ’s G uide Rev . 1.01 2.4 1 T aps Tr ansferrin g Image （ 1X-1Y ） X W Y H X W -1 Y H X 2 Y H X 1 Y H Tap1 Sep X = 1 Sep Y = 1 X 1 Y H-1 X 2 Y H-1 X W Y H-1 X W -1 Y H-1 X 1 Y 1 X 1 Y 2 X 2 Y 1 X 2 Y 2 X W -1 Y 2 X W Y 2 X W -1 Y 1 X W Y 1 2.5 Pixel T ransferring I mage Pixeln of Data: nth pixel bei ng transferred Pixel1 o ...

  • Ricoh FV-L030B1 - page 14

    14/32 FV -L030 B1 User ’s G uide Rev . 1.01 3 Camera Operational Mode 3.1 Normal Mod e In this m ode, the images are output continuous ly . 3.1.1 Frame Expo sure 3.1.2 Electric Shut ter E x p o s u r e t i me I n t e r n a l V D CCD e x p o s u r e V i d e o o u t E x p o s u r e t i m e I n t e r n a l V D CCD e x p o s u r e V i d e o o u t ...

  • Ricoh FV-L030B1 - page 15

    15/32 FV -L030 B1 User ’s G uide Rev . 1.01 3.2 Pulse W idth T rigger Mode In this “pulse width trigger mode” with pos itive po larity , the camera exposure starts at the rising edge of the trigger si gnal and stops at the falling edge of the trigger s ignal. Theref ore, in th e case that the exposure posit ive polarity is selected, th e actu ...

  • Ricoh FV-L030B1 - page 16

    16/32 FV -L030 B1 User ’s G uide Rev . 1.01 3.2.2 Pulse W idth T rigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows with the long ex posure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l. The video output si gnal is sen ...

  • Ricoh FV-L030B1 - page 17

    17/32 FV -L030 B1 User ’s G uide Rev . 1.01 3.3 Edge Pres et Trigger Mode In this “edge preset tr igger m ode”, the camera exposure starts at t he rising edge of the trigger s ignal like the “pulse width trigger m ode” in the previous sec tions. However, in this m ode, the exposure duration t ime is based o n the preset value stored b y t ...

  • Ricoh FV-L030B1 - page 18

    18/32 FV -L030 B1 User ’s G uide Rev . 1.01 3.3.2 Edge Pres et Trigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows when the long exposure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l. The video output si gnal is sent ...

  • Ricoh FV-L030B1 - page 19

    19/32 FV -L030 B1 User ’s G uide Rev . 1.01 3.4 H Reset Mod e Normally , v ideo noise appears when the beginning of trigger si gnal is applied before f inishing the video read-out of the prev ious f rame. This noise is caused by the SU B puls e, which is acti vated to clear al l res idual c harges on the CCD p rior t o a new exposure. By select i ...

  • Ricoh FV-L030B1 - page 20

    20/32 FV -L030 B1 User ’s G uide Rev . 1.01 4 C ommunication Protocol This camera has a communication function that enables external devises, such as a P C, to control the cam era’ s functions. Please use the “R- CLinkCtrl” comm unication software, or the following c ommunication protoc ol to comm unicate to the cam era: 4.1 Commun ication ...

  • Ricoh FV-L030B1 - page 21

    21/32 FV -L030 B1 User ’s G uide Rev . 1.01 The description of the format is as follows. Name Descriptions SOF S tart of Fram e. Alwa ys set or receive the value as “02H” Device Code This indicates the destination of c ommunication. Set “000000” when accessing the cam era’ s function settings Set “100000” when accessing the cam era? ...

  • Ricoh FV-L030B1 - page 22

    22/32 FV -L030 B1 User ’s G uide Rev . 1.01 【 Example Code 】 Reading the data from the com m and 00H  Comm and to send: 02H, 00H, 00H, 01H, 0 0H, 03H SOF Device Code Read/Write Page Selection Comman d Code Dat a Length Data EOF (8bit) (6bit) (1bi t) (1bit) (8bit) (8bit) (1byte) (8 bit) 02H 00H 00H 01H 00 H 03H  Comm and to receive upon ...

  • Ricoh FV-L030B1 - page 23

    23/32 FV -L030 B1 User ’s G uide Rev . 1.01 4.4 Camera C ontrol Co mmand 4.4.1 Camera C ommand Li st  The data unit of the each comm and is 1 byte (8bit).  The data can be s aved to the EEPROM if there is an “X” in the “Sa ve to EEPROM” colum n in the following list.  The camer a ini tializes base d on the stored data in the EEPR ...

  • Ricoh FV-L030B1 - page 24

    24/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. R/W Save to EEPROM Function Initial Dat a Dat a Range 78H R/W X T est pattern sele ction (8bit: D [7..0]) 0 0 to 31 79H R/W X Image ef fect selec tion (8bit: D[7. .0]) 0 0 to 255 7A to 7FH Reserved 80H R/W EEPROM contro l (8bit: D[70]) 0 0 to 1 81 to 8FH Reserved - - 94H R/W X S trobe act ...

  • Ricoh FV-L030B1 - page 25

    25/32 FV -L030 B1 User ’s G uide Rev . 1.01 4.4.2 Description s of the C amer a Control C ommands (The underline setti ngs are the factor y default settings) Command No. Command Descriptions 10H: MOD1[70] [Camera function mode setting 1] Initial data: 09H Sets the following camera function mode. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7: Continuous ...

  • Ricoh FV-L030B1 - page 26

    26/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 12H: MOD3[70] [Camera function mode setting 3] Initial data: 0 Sets the following camera function modes. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7~D6: Video Out 00: 10bit 01: 8bit 10: 12bit 1 1: No function (Prohibited setting. Do not set these value s) D5: T rigg er-in con ...

  • Ricoh FV-L030B1 - page 27

    27/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 20H: SVR[70] 21H: SVR[158] [Exposure time (H) of the electronic shutter] Initial Data: SVR[150] = 0, Dat a Range: 0 to 4095 Sets the preset shutter speed (or CCD ex posure time) for electronic shutter . The preset shutter speed is defined by the following formul ...

  • Ricoh FV-L030B1 - page 28

    28/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 28H: DL Y[70] 29H DL Y[15...8] [Delay time for the trigger] Initial Data: DL Y[70] = 0, Data Range: 0 to 65,535 Sets the delay time from the trigger input signal to the st art of the exposure. At 90 fp s : Delay time (us) = 74 x 0.0271606 * DL Y[70] = 2.0099 (us ...

  • Ricoh FV-L030B1 - page 29

    29/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 78H: TESTP[70] [T est pattern selection] Initial d ata: TEST P[7. .0] = 00H Sets the test patt ern output from the camera. D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7 to D5 No Function Always set as “000” D4 to D0 T est pattern 00H: Video output 01H: Gray scale 02H: Horizo ...

  • Ricoh FV-L030B1 - page 30

    30/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions A0H: PDC0[70] [Pixel defect correction mode] Initial data: PDC0[7..0] = 0 D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7: Write the correction index 0  1 * W rites the coordinates of the comm and, A2 to A5, to the in dex number specified b y the command A1. *This bit is cleare ...

  • Ricoh FV-L030B1 - page 31

    31/32 FV -L030 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions C5H: [70] [Look-up table (Gamma)] Initia l data: [7..0] = 00H D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7 to D3: No function Always set as “00000” D2: Look -up t ab le (RAM ) 0: OFF 1: L oad D1: Look -up t ab le upload 0: RAM only 1: RAM a nd ROM D0: No function Always set ...

  • Ricoh FV-L030B1 - page 32

    32/32 FV -L030 B1 User ’s G uide Rev . 1.01 Revision Histor y Rev Date Changes Note 1.00 2012/06/20  Initial Release 1.01  Updated Camera Output Ti m ing Horizontal T im ing Comm unication Protocol 20-21H SVR 78H T est patte rn 79H Pasteurizat ion Deleted F1H comm and due to test use only RICOH CO MP A NY , L TD. URL http:// www .r icoh.com ...

メーカー Ricoh カテゴリー Digital Camera

Ricoh FV-L030B1のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FV-L030B1の取扱説明書
- Ricohの製品カード
- パンフレット
- またはRicoh FV-L030B1の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Ricoh FV-L030B1の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Ricoh FV-L030B1の取り付け説明書、サービスマニュアル、簡易説明書、またはRicoh FV-L030B1のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Ricoh FV-L030B1の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Ricoh FV-L030B1デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRicoh FV-L030B1を使用するのを助ける技術的文書のことです。説明書は通常、全てのRicoh FV-L030B1ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Ricohの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Ricoh FV-L030B1の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRicoh FV-L030B1の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Ricoh FV-L030B1に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Ricoh FV-L030B1デバイスの基本機能を使うにあたってのヒント。 Ricoh FV-L030B1のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Ricoh FV-L030B1に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRicoh FV-L030B1のメーカー/サービスへの連絡先に関する情報。

Ricoh FV-L030B1についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもRicoh FV-L030B1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRicoh FV-L030B1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)