-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 1
A T TIX 791-2M/B1 302001675 - 2008-05-19 Operating Instructions .......................................................... 1-13 Betriebsanleitung ................................................................ 14-26 Notice d’utilisation .............................................................. 27-39 Gebruiksaanwijzing ...................... ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 2
A TTIX 791-2M/B1 auto auto 2 3 4 1 6 6 8 10 13 7 7 9 11 12 5 ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 3
1 A TTIX 791-2M/B1 Contents 1 Important safety instructions 2 Description 3 Before start-up 4 Operation 5 Applications and techniques 6 After finishing work 7 Maintenance 8 T roubleshooting 9 Further information ............................................................................................2 2.1 Purpose ................................ ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 4
2 A TTIX 791-2M/B1 1 Impor tant saf ety instructions Symbols used to mark instructions Before using the vacuum cleaner , alwa ys read the operating instruc- tions and keep them readily av ailable . This symbol is used to mark safety instruc- tions that must be observed to prev ent damage to the vacuum cleaner and its performance. This symbol is use ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 5
3 A TTIX 791-2M/B1 Precautions and safety regulations when using the vacuum c leaner Before start-up Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing. If the power cord is damaged, it must be replaced by Nilfisk- Alto-Service or an electr ician to av oid danger bef ore use of the vacuum cleaner is continued. Use only th ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 6
4 A TTIX 791-2M/B1 Use the sock et on the vacuum cleaner for the purpose defined in the operating instructions only . Before plugging an appliance into the appliance sock et: 1. Switch off the vacuum clean- er 2. Switch off the appliance to be connected. CA UTION! Follo w the operating instructions and safety instructions f or appli- ances connecte ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 7
5 A TTIX 791-2M/B1 2.2 Operating elements See fold-out page at the front of these operating instructions. 1 Handle 2 Suction pipe suppor t 3 Accessory holder 4 Applicance switch with suction power control 5 Filter for air supply to motor 6 Retaining clamp 7 T ank locks 8 Dir t tank 9 Castor with brake 10 Inlet fitting 1 1 Appliance soc ket 12 Hose ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 8
6 A TTIX 791-2M/B1 4.2 Switching on the vacuum c leaner 4.2.1 Switch position “I” 1. T urn the switch to position „I“. The vacuum cleaner motor star ts . 4.2.2 Switch position „auto“ Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off. 1. T urn the s witch to positio ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 9
7 A TTIX 791-2M/B1 4.4 Acoustic warning For saf ety reasons , an acoustic warning sounds if the air speed in the suction hose drops to be- low 20 m/s. See section “T rou- bleshooting”. 5 Applications and techniques 5.1 T echniques If used correctly , additional ac- cessories, suction nozzles and suction hoses can enhance the cleaning action and ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 10
8 A TTIX 791-2M/B1 6 After finishing w ork 6.1 Switching the vacuum cleaner off and storage 1. After picking up hazardous dust, vacuum clean the out- side of the cleaner . 2. Switch off the vacuum clean- er and pull the mains plug out of the sock et. 3. Wind up the power cord and hang it on the handle. 4. Empty the tank and clean the vacuum cleaner ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 11
9 A TTIX 791-2M/B1 7.2.2 Replacing the waste bag 1. Remove the upper section of cleaner from the dir t tank. 2. Open the retaining clamps (1) and remov e the interme- diate ring (2) from the tank. 3. Close the waste bag using the cable binder (3). 4. Dispose of the dir t in accord- ance with legal regulations. 5. Inser t a new filter bag into the c ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 12
10 A TTIX 791-2M/B1 5 5 5 5 4 4 4 4 7.2.5 Replacing filter element During the follow- ing work, ensure that dust is not un- necessarily spread around. Wear a P2 (2). 3. Place the protective filter bag 1) ov er the filter element (3). 4. Carefully remo ve the filter element and close the pro- tective filter bag with a knot. 5. Clean the filter seal ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 13
11 A TTIX 791-2M/B1 8 T roub leshooting Fault Cause Remedy ‡ Motor does not star t > Fuse of the mains sock et has blown. • Connect mains fuse. > Overload protection s witch has tripped. • Switch off the vacuum cleaner and allow it to cool f or appro x. 5 minutes. If the cleaner can- not be star ted again, contact the Nilfisk-Alto servi ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 14
12 A TTIX 791-2M/B1 9.2 Guarantee Our general conditions of busi- ness are applicable with regard to the guarantee. Subject to change as a result of technical advances . 9.3 T ests and app rovals The vacuum cleaners hav e been tested as specified in IEC/EN 60335-2-69 including appendix AA. All the requirements were fulfilled for equipment in dust c ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 15
13 A TTIX 791-2M/B1 EC declaration of conf ormity Alto Deutschland GmbH Guido-Oberdorfer-Straße 2-8 D-89287 Bellenberg Product: Model: Description: The design of the appliance corresponds to the following pertinent regulations: Applied harmonized standards: Applied national standards and technical specifications: Dipl.-Ing. W olfgang Nieuwkamp T e ...
-
Nilfisk-ALTO ATTIX 791-2M/B1 - page 16
KWWSZZZ QLO¿VNDOWRFRP HEADQUARTER DENMARK 1LO¿VN$GYDQFH*URXS 6RJQHYHM %U¡QGE 'HQPDUN 7 HO )D[ (PDLOPDLO#QLO¿VNDGYDQFHGN SALES COMP ANIES AUSTRALIA 1LO? ...
Nilfisk-ALTO ATTIX 791-2M/B1についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもNilfisk-ALTO ATTIX 791-2M/B1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNilfisk-ALTO ATTIX 791-2M/B1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。