Cisco Systems IPS4510K9の取扱説明書

36ページ 2.98 mb
ダウンロード

ページに移動 of 36

Summary
  • Cisco Systems IPS4510K9 - page 1

    CH A P T E R 7-1 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 7 Installing the IPS 4510 and IPS 4520 Contents This chapter describes t he Cisco IPS 4510 an d IPS 4520, and includes the follo wing sections: • Installation Notes and Caveats, page 7-1 • Product Ov ervie w , page 7-2 • Chassi ...

  • Cisco Systems IPS4510K9 - page 2

    7-2 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Product Overview War ni n g Only trained and qualified pe rsonnel shou ld install , replace, or service this equipment . Statement 49 Caution Read the safety warnings in the Re gulatory Compliance and ...

  • Cisco Systems IPS4510K9 - page 3

    7-3 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features IME The Intrusion Pre v ention System Manager Express (IME) 7.2.3 and later also support the IPS 4510 and IPS 4520. IME is a network management applicat ion that pro vides system hea ...

  • Cisco Systems IPS4510K9 - page 4

    7-4 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features Figure 7-2 sho ws the front view of the IPS 4510 and IPS 452 0. Figure 7 -2 IPS 451 0 and IPS 4520 Fr ont P a nel Featur es 1 Remov al screws 2 Reserved bays for hard disk drives 1 1. ...

  • Cisco Systems IPS4510K9 - page 5

    7-5 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features Figure 7-3 sho ws the front p anel indicators. Figur e 7 -3 Fr ont P anel Indicators Ta b l e 7 - 1 describes the front panel indicators on the IPS 4510 and IPS 4520. 1 PWR 2 BOO T 3 ...

  • Cisco Systems IPS4510K9 - page 6

    7-6 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features PS1 Indicates the state of the power supply module installe d on th e right w hen facing the back panel: • Of f—No po wer supply mo dule present or no A C input. • Green—Po we ...

  • Cisco Systems IPS4510K9 - page 7

    7-7 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features Figure 7-4 sho ws the back panel features. Figure 7 -4 Bac k P anel Feat ures Figure 7-5 sho ws the po wer supply module indicators. Figur e 7 -5 P ower Suppl y Module Indicat ors 1 ...

  • Cisco Systems IPS4510K9 - page 8

    7-8 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Chassis Features Ta b l e 7 - 2 describes the power suppl y module and f an module indicators. Ta b l e 7 - 3 describes the Ethernet port indicators. T able 7 -2 Po wer Supply Module and Fan Module In ...

  • Cisco Systems IPS4510K9 - page 9

    7-9 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Specifications Specifications Ta b l e 7 - 4 li sts the spec ifications for th e IPS 451 0 and IPS 45 20. 10-Gigabit Ethernet Fiber (SFP+)/1-Gigabit Ethernet Fiber (SFP) • Left side: – Off—No 1 ...

  • Cisco Systems IPS4510K9 - page 10

    7-10 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Accessories Accessories The contents of the sensor packin g box contains the follo wing items you need to install the sen sor: • Sensor chassis • Documentation • 2 Y ello w Ethernet cabl es • ...

  • Cisco Systems IPS4510K9 - page 11

    7-11 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Memory Configuration s Memory Configurations The IPS 4510 and IPS 4520 h av e up to 6 DIMM mo dules per CPU. DIMM p opulation is platform-dependent. Ta b l e 7 - 5 shows the memory conf igurations. ...

  • Cisco Systems IPS4510K9 - page 12

    7-12 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing the IPS 4510 and IPS 4520 Ta b l e 7 - 7 lists the SFP/SFP+ modules that th e IPS 4510 and IPS 4520 support. Installing the IPS 4510 and IPS 4520 The IPS 451 0 and IPS 4 520 have two dedic ...

  • Cisco Systems IPS4510K9 - page 13

    7-13 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing the IPS 4510 and IPS 4520 b. Connect one RJ-45 connector to the Management 0/0 interf ace. c. Connect the other end of t he Ethernet cable to the Ethernet port on your computer or to your ...

  • Cisco Systems IPS4510K9 - page 14

    7-14 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing the IPS 4510 and IPS 4520 b. Connect one end of the LC cable to the SFP/SFP+ module. c. Connect the other end of the LC cable to a network de vice, such as a router or switch. Step 5 Insta ...

  • Cisco Systems IPS4510K9 - page 15

    7-15 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Removing and Installing the Core IPS SSP Step 6 Po wer on the sensor . Caution If the appliance is subjected to en vironmental ov erheating , it shuts do wn and you must manually po wer cycle it to ...

  • Cisco Systems IPS4510K9 - page 16

    7-16 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Removing and Installing the Core IPS SSP Step 7 Grasp the ejection le v ers at the left and right bottom o f the designat ed slot and pull them out. Step 8 Grasp the sides of the m odule and pull it ...

  • Cisco Systems IPS4510K9 - page 17

    7-17 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Removing and Installing the Power Supply M odule Removing and Installing the Power Supply Module The IPS 4510 ships with one po wer supply modu le and one fan mod ule installed, and the IPS 4520 shi ...

  • Cisco Systems IPS4510K9 - page 18

    7-18 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Removing and Installing the Power Supply Module Step 5 Install the ne w po wer supply module by ali gning it with the po wer supply module bay and pushing it into place until it is seated. Step 6 T i ...

  • Cisco Systems IPS4510K9 - page 19

    7-19 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Removing and Installing the Fan Module Removing and Installing the Fan Module The IPS 4510 ships with one po wer supply modu le and one fan mod ule installed, and the IPS 4520 ships with two po wer ...

  • Cisco Systems IPS4510K9 - page 20

    7-20 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing the S lide Rail Kit Hardware Step 3 Install the ne w fan module by alig ning it with the fan module bay and pushing it into place until it is seated. Step 4 T ighten the capti ve scre ws. ...

  • Cisco Systems IPS4510K9 - page 21

    7-21 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Removing the Slide Rail Kit Figure 7-6 sho ws all of the brackets that can be remov ed for th e fix ed rack moun t. Figur e 7 -6 B ra ck ets for th e Fix ed Rac k Moun t Step 4 Attach ...

  • Cisco Systems IPS4510K9 - page 22

    7-22 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Remo ving the Slide Rail Kit Package Contents The slide rail kit package co ntains the follo wing items: • Left and right slide rails • Six #10-32 scre ws • T wo #10-32 cage nu t ...

  • Cisco Systems IPS4510K9 - page 23

    7-23 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Removing the Slide Rail Kit For square hol e posts, square studs must be att ached fully inside the square hole on the rack rail . For threaded hole posts, the ro und stud must fully ...

  • Cisco Systems IPS4510K9 - page 24

    7-24 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Remo ving the Slide Rail Kit Step 2 Secure the slide rail to the rack post wi th the provi ded #10-32 scre ws b y tightening the scre ws at the fron t and rear end of the slide rail to ...

  • Cisco Systems IPS4510K9 - page 25

    7-25 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Removing the Slide Rail Kit Step 3 For square h ole racks, install one #10-32 cage nu t on each side of the rack rail ( Figure 7-11 ). Leave one square ho le spacing above th e slide ...

  • Cisco Systems IPS4510K9 - page 26

    7-26 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Remo ving the Slide Rail Kit Step 4 Install the chassis on the outer rail . Make sure that th e U-bars are aligned to the outer rail e venly , then push the cha ssis into t he rack ( F ...

  • Cisco Systems IPS4510K9 - page 27

    7-27 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Removing the Slide Rail Kit Step 5 T ighten the scre ws to secure the cha ssis to the rac k ( Figure 7-13 ). Use the upper hole to secure the chassis to the rack. a. For square hole r ...

  • Cisco Systems IPS4510K9 - page 28

    7-28 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Remo ving the Slide Rail Kit Removing the Chassis from the Rack T o remo ve the chassi s from the rack, follo w these steps: Step 1 Remov e the scre ws from the front brackets of the r ...

  • Cisco Systems IPS4510K9 - page 29

    7-29 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing and Removing the Slide Rail Kit Step 3 Press do wn the release hook to remo ve th e chassis from the rack ( Figure 7-15 ). Figure 7 -15 Pr essing Do wn the Release Hook 33 0564 ...

  • Cisco Systems IPS4510K9 - page 30

    7-30 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Rack-Mounting the Ch assis Using the Fixed Rack Mount Step 4 Remov e the two scre ws from the front and rear of the r ack that are securing the slide rail, and release the latch and pull out t he rai ...

  • Cisco Systems IPS4510K9 - page 31

    7-31 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Rack-Mountin g the Chassis Using the Fixed Rack Mount Step 2 Position the front b racket on the side of the sensor and line up the bracke t scre ws with the scre w holes on the sensor . Step 3 T igh ...

  • Cisco Systems IPS4510K9 - page 32

    7-32 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Rack-Mounting the Ch assis Using the Fixed Rack Mount Step 9 (Optio nal) Install t he proper slide-m ount brackets on t o the rear bracket on the chassis. Step 10 (Optional) For added securi ty , scr ...

  • Cisco Systems IPS4510K9 - page 33

    7-33 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Installing the Cab le Management Brack ets Installing the Cable Management Brackets The IPS 4510 and IPS 4520 ship with tw o cable man agement brack ets that you can us e to or ganize the cables con ...

  • Cisco Systems IPS4510K9 - page 34

    7-34 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 Troubleshooting Loose Connections Figur e 7 -1 8 Cable Management Brac k ets f or the Slide Rail Step 4 T ighten the scre ws in to the rack. Step 5 Reattach the power cable to the sensor . Step 6 Org ...

  • Cisco Systems IPS4510K9 - page 35

    7-35 Cisco Intrusion Prevention System Applianc e and Module Installati on Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 IPS 4500 Series Sensors and the SwitchApp IPS 4500 Series Sensors and the SwitchApp The 4500 series sensors ha v e a b uilt in switch that pro vides the external monitoring interfaces of the sensor ...

  • Cisco Systems IPS4510K9 - page 36

    7-36 Cisco Intrusion Prevention System Appliance and Module In stallation Guide for IPS 7.1 OL-24002-01 Chapter 7 Installing the IPS 4510 and IPS 4520 IPS 4500 Series Sensors and the SwitchApp ...

メーカー Cisco Systems カテゴリー Switch

Cisco Systems IPS4510K9のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- IPS4510K9の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems IPS4510K9の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems IPS4510K9の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems IPS4510K9の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems IPS4510K9のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems IPS4510K9の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems IPS4510K9デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems IPS4510K9を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems IPS4510K9ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems IPS4510K9の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems IPS4510K9の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems IPS4510K9に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems IPS4510K9デバイスの基本機能を使うにあたってのヒント。 Cisco Systems IPS4510K9のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems IPS4510K9に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems IPS4510K9のメーカー/サービスへの連絡先に関する情報。

Cisco Systems IPS4510K9についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems IPS4510K9の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems IPS4510K9で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)