XO Vision X348NTの取扱説明書

27ページ 1.55 mb
ダウンロード

ページに移動 of 27

Summary
  • XO Vision X348NT - page 1

    PWR PWR TOUCH SCREEN 1-DIN 7 TFT LCD DVD PLA YER X348NT MADE IN CHINA R ...

  • XO Vision X348NT - page 2

    1 Open/Close Source/Power Mute play/pause Eject RPT TIT TFT -LCD adjustment Display position adjustment Loading and Replacing the battery Basic operation Receiption collection Speaker collection Install the unit Remove the unit Band Band tuner AS/PS Contents Warning and Precautions...........................................2 Electric Connection.... ...

  • XO Vision X348NT - page 3

    2 Warnings and Precautions 1 Only connect the unit to a 12V power supply with negative grounding. Never install the unit where the operation for safety driving is restrained. Never use the video display function in the front when driving to prevent the violation of laws regulations and also to reduce the risk of traffic accident except using for re ...

  • XO Vision X348NT - page 4

    3 1 2 3 4 5 6 7 8 9 10 11 Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop/ dealer for inquiry . If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such ...

  • XO Vision X348NT - page 5

    4 Electric Connection T o front left speaker T o front right speaker T o rear left speaker T o rear right speaker White/Black White Gray/Black Gray Green lack /B Green Purple/Black Purple Ignition key sw tch i Car fuse box (main fuse) Battery ACC wire (Red) Battery wire (Y ellow) Ground wire (Black) (T o car chassis) CAR ANTENNA FRONT .L FRONT .R R ...

  • XO Vision X348NT - page 6

    5 Before installing the receiver permanently , fit it in the approximate place in your car ,and connect the equipment according to the speakers and electrical connections. When your system is operated properly ,(preferably with the car engine running), follow the instructions for permanent installation of your system. 1) Adapter (not supplied) 2)Be ...

  • XO Vision X348NT - page 7

    6 General Features ADJ CLOCK ST BAND BT MUTE EJECT V O L MIC IR RESET AUX IN STOP RPT SRC Adjust angle Stop/Clock Adjust angle RPT/ST 10 8 6 3 1 4 19 2 9 7 12 11 17 5 18 16 15 14 13 PWR ...

  • XO Vision X348NT - page 8

    7 General Features Pull out Loading and replacing the battery R emote Control Notes of remote control using: Aim the remote controller at the remote sensor on the unit. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer . DO NOT store the remote control under direct sunlig ...

  • XO Vision X348NT - page 9

    R emote Control 8 Button and Function 5 1 3 4 2 Mute Sub-T Band APS APS APS EQ EQ ST S T R/L N/P SRC PWR 1 2 3 4 5 6 7 8 9 0 Enter SEL CLK Tit l e Tit l e Setup AF TA PTY RDM PRG RPT PBC OSD ID 3 I D3 # ABC DEF GHI JKL MNO PQRS TUV WXYZ Goto RO/SN 10+ * Language Angle 7 6 [BAND/RDM] Button: Band switch/Play randomly [APS/PRG] Button: Scan/Program [ ...

  • XO Vision X348NT - page 10

    9 Play operation ADJ CLOCK ST BAND BT MUTE EJECT V O L MIC IR RESET AUX IN STOP RPT SRC Adjust angle Stop/Clock Adjust angle RPT/ST PWR ON.OFF Press[ ] to eject the disc. Eject EJECT : Note: About 10 seconds after the disc ejected ,if not taken out, the disc will be absorbed in again. Press [PWR] button shortly will turn the unit on. Hold [PWR] but ...

  • XO Vision X348NT - page 11

    Display position Adjustment CAUTION For smooth adjustment, make sure that you return the lateral angle to the neutral position and then adjust the tilt angle. Avoid physical shock on the display . Do not place any object on the display forcefully , or subject it to undue force. Do not move the display forcibly . The monitor's movable range may ...

  • XO Vision X348NT - page 12

    Setup Operation 11 ENTER MENU: Press [MENU] button, then touch setting button, it will show in screen follows: MENU Video mode: Menu operation Audio mode: BASIC mode: BASS 0 TREBLE -0 7 BALANCE R0 6 AUDIO FADER R0 6 EQ FLAT LOU D OF F BEEP ON CLOCK 00:00 BASIC BRIGHT 14 COLOR 14 CONTRAST 13 VIDEO TINT 15 VMODE STND Vd o s e t u p ie Bright Color Co ...

  • XO Vision X348NT - page 13

    Band Press [BAND] button to transfer band. FM1 FM2 AM1 AM2 FM3 Band T une Manually T une Automatically T une Press[ ] button: adjust to higher frequency .(such as 87.5,87.55...) Press[ ] button: adjust to lower frequency(such as 105.5,105.0...) Holding down the [ ] button: search higher frequency station, and will stop when meeting one. Holding dow ...

  • XO Vision X348NT - page 14

    R adio Operation AF(Alternative Frequency) Press AF and then press[ ],the machine will scan signal get the best frequency of the local radio station. If meet a stronger signal of the same program. letter TP will appear on LCD , and unit will automatically choose the stronger signal sought. T A(T raffic announcement) Press T A , the unit will prior ...

  • XO Vision X348NT - page 15

    L/R 14 Forward: Hold [ ] button down; Select chapter or section: press [ ] to choose last chapter , press [ ]to choose next. In the DVD mode, Rewind: Hold [ ] button down. RPT RPT : In the play mode press[ RPT ]button then can transit among the following status. REP ONE REP ALL REPEA T OFF TIT Play/pause In play mode, press [ ] button to switch to ...

  • XO Vision X348NT - page 16

    SD/USB Operation USB/SD play operation 15 USB/SD mode Inset USB/SD ,the play will to the USB/SD playing mode antomaticly . USB/SD mode Press [ ] button to play or pause. PLA Y/P AUSE: Under USB or SD play , press[ , ]can select tracks. Press [ST/RPT] button first to repeat the playing track , RPT ONE RPT ALL RPT DIR RPT OFF REPEA T Select: Press bu ...

  • XO Vision X348NT - page 17

    16 - - The Bluetooth is wireless mode of transmission in short distance. Through Bluetooth function, the DVD unit establishes connection with Bluetooth handset. And then, these units can realize mutually controling and file transfering. Method : A: Press the [SOURCE] button, to return to main menu.. B:Exhales the main menu, choose the Bluetooth to ...

  • XO Vision X348NT - page 18

    13590205862 13590205862 13590205862 17 Note: If the unit does not have this function, pls skip it. Some models of mobile phones are not supported by the Bluetooth module of this unit. Mobile phone After connected, you can make phone call through, touch screen or phone record. A: Making mobile phone call After making phone call, the [ ]will shining. ...

  • XO Vision X348NT - page 19

    TV Operation 18 TV operation Press [APS] or press [AMS] to search and store TV station automatically . Channel search: Press [SRC] to enter main menu, then press TV icon on TFT screen to enter . TV mode: Y ou need install TV antenna, when receive program. (Only for remote control) Enter a channel number by pressing [0]to[9]. Direct Channel Selectio ...

  • XO Vision X348NT - page 20

    1 2 ............ 1 ............ 1 External view ........ Number of items External view ........ Number of items The use of any accessories except of those provided might result in damage to the unit .Make sure only to use the accessories shipped with the unit ,as shown above. ............2 3 Accessories 19 ...

  • XO Vision X348NT - page 21

    21 What appears to be trouble is not always serious. Please check the following points before calling a service center . T roubleshooting Familiar characters and their meanings Characters Causes Remedies NO Disc Bad Disc Unkown Disc Region Error Disc is too dirty . Disc is inserted upside down. No disc in the unit. Disc is extreme dirty . Disc is i ...

  • XO Vision X348NT - page 22

    22 T roubleshooting General problems The fuse of the unit has been broken. Remedies Symptoms The unit cannot be powered on. Remote controller does not work. No sound comes out or it's hard to hear . Poor sound quality or sound distortion. User preset information is lost when ACC is off. False operations and etc. The fuse of car battery has bee ...

  • XO Vision X348NT - page 23

    T roubleshooting TFT Monitor Remedies Characters are abnormal. Causes Abnormal display like as pulsatile stripes on the image and on. No image appears on the monitor and warning information is shown at all times. Symptoms The color system of DVD disc is not suited with the monitor . The actual color system is not the same as the marked color system ...

  • XO Vision X348NT - page 24

    T roubleshooting Radio T uner Mp3 playback Remedies Causes Symptoms Remedies Causes Symptoms It's hard to receive stations. Auto antenna is not extended completely . Auto antenna is not connected with the unit firmly . L OCAL function is on. Correct the connection according to (Electrical Connections Overall Diagram). Correct the connection ac ...

  • XO Vision X348NT - page 25

    T roubleshooting 25 DVD player Remedies Causes Symptoms Disc cannot be inserted. There is a disc in the unit already . Eject the disc then insert another one. Disc cannot be played back. Disc is scratched. Change the disc. Disc is too dirty or wet. The pickup is dirty . Disc is not compatible with the unit. Parental lock class is too high. Disc is ...

  • XO Vision X348NT - page 26

    26 Specifications Liquid crystal panel.........................................7 inches wide Display weight ...........................................................1.7kg Number of pixels............................................33,6960 pixels Display method........................T ransparent color filter format Drive method................... ...

  • XO Vision X348NT - page 27

    O WNER'S MANUAL Before installation and operating the unit please read this manual thoroughly and retain it for future reference 1 Y ear Limited Manufacturer Warranty - XO Vision warrants to the original retail purchaser of this product that should this product have any defect, under normal conditions, such defect(s) will be repaired or replac ...

メーカー XO Vision カテゴリー Car Video System

XO Vision X348NTのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- X348NTの取扱説明書
- XO Visionの製品カード
- パンフレット
- またはXO Vision X348NTの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、XO Vision X348NTの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、XO Vision X348NTの取り付け説明書、サービスマニュアル、簡易説明書、またはXO Vision X348NTのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、XO Vision X348NTの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

XO Vision X348NTデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがXO Vision X348NTを使用するのを助ける技術的文書のことです。説明書は通常、全てのXO Vision X348NTユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

XO Visionの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. XO Vision X348NTの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははXO Vision X348NTの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。XO Vision X348NTに関してこのドキュメントで見つけることができる全てのヒントの目次
3. XO Vision X348NTデバイスの基本機能を使うにあたってのヒント。 XO Vision X348NTのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。XO Vision X348NTに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるXO Vision X348NTのメーカー/サービスへの連絡先に関する情報。

XO Vision X348NTについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもXO Vision X348NTの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがXO Vision X348NTで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)