ページに移動 of 58
b Har d ware Reference Guide Compaq Ev o Desktop F amily: Desktop Models Document P ar t Number : 243850-002 January 2002 This book provides basic information for upgrading this series of computers. ...
© 2002 Compaq Computer Corporation Compaq, the Compaq logo, and Evo are trademarks of Compaq Information T echnologies Group, L.P . Microsoft, MS-DOS, W indo ws, W indows NT are trademarks of Microsoft Corporation. Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation. All other product names mentioned herein may be tradema ...
Hardware Ref erence Guide iii Contents 1 Product Features Standard Configuration Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Rear Panel Components . . . . . . . . . . . . ...
iv Hardware Ref erence Guide Contents A Specifications B Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA Devices . . . . . . . . . . . . . . . . . . . . . . . B–1 Guidelines for Installing Ultra ATA Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2 SCSI Devices . . . . . . . . . . . . . . . . ...
Hardware Ref erence Guide 1–1 1 Pr oduct Features Standar d Configuration Features The Compaq Evo™ Desktop features may va ry depending on your model. For a complete listing of the hardw are and software installed in your computer , run Compaq Diagnostics for W indo ws or the INSPECT utility (av ailable on some models). Instructions for using t ...
1–2 Hardware Ref erence Guide Product F eatures Fr ont P anel Components Front P anel Components 1 Diskette Driv e Activity Light 6 Hard Drive Activity Light 2 Po w e r B u t t o n 7 Microphone Connector (optional) 3 Diskette Eject Button 8 Univ ersal Serial Bus (USB) (optional) 4 CD-ROM Driv e Busy Indicator 9 Stereo Headphone Jac k (optional) 5 ...
Hardware Ref erence Guide 1–3 Product F eatures Rear P anel Components Å W ARNING: T o reduce the risk of electr ic shoc k or damage to the equipment: ■ Do not disable the po wer supply cord grounding plug. The g rounding plug is an impor tant saf ety feature . ■ Plug the power cord into a g rounded (ear thed) electrical outlet that is easil ...
1–4 Hardware Ref erence Guide Product F eatures Easy Access Ke yboar d Compaq Easy Access Ke yboard Components 1 Ctrl Ke y Used in combination with another ke y; its eff ect depends on the application software y ou are using. 2 Windows Logo K e y* Used to open the Star t menu in Microsoft Windows . Used in combination with other ke ys to perf orm ...
Hardware Ref erence Guide 1–5 Product F eatures Easy Access Software Y our Easy Access Ke yboard Buttons are programmed to default assignments. The pre installed Easy Access Software allo ws you to reprogram the Easy Access Buttons to reflect your personal preferences. The buttons can be reprogrammed to an y program or service of your choice or t ...
1–6 Hardware Ref erence Guide Product F eatures Easy Access P aper Icon Inser t The paper icon insert functions as a visual aid in identifying the programmed destination of each Easy Access Button. Whene ver you reprogram an Easy Access Button, use the Paper Insert T emplate document to select and print an icon that reflects the ne w button assig ...
Hardware Ref erence Guide 1–7 Product F eatures Serial Number Location Each computer has a unique serial number which may be located on the cov er top 1 or the rear panel 2 of the computer . K eep this number av ailable for use when contacting Compaq customer service for assistance. Serial Number Location ...
1–8 Hardware Ref erence Guide Product F eatures ...
Hardware Ref erence Guide 2–1 2 Har dware Upgrades Serviceability Features Y our computer includes features that make it easier to upgrade and service. Installation Sequence It is very important that you follo w this sequence of steps to ensure the proper installation of any optional equipment. F or more information about Computer Setup, refer to ...
2–2 Hardware Ref erence Guide Hardware Upgr ades 3. Install an y optional equipment. See the applicable sections of this guide or to the documentation provided with the optional equipment for instructions. 4. Replace the computer co ver . 5. T urn on the monitor , computer , and any devices you w ant to test. 6. Reconf igure the computer , if nec ...
Hardware Ref erence Guide 2–3 Hardware Upg rades Remo ving the Computer Cover T o remov e the computer cov er: 1. Shut do wn the operating system properly , then power of f the computer and any e xternal de vices. 2. Disconnect the po wer cord from the power outlet, and disconnect any e xternal de vices. Ä CA UTION: Before removing the computer ...
2–4 Hardware Ref erence Guide Hardware Upgr ades Replacing the Computer Co ver T o replace the computer cov er: 1. Hold the co ver ov er the chassis, then rest the guide tabs located inside the cov er on the diagonal ramps at the rear of the chassis. 2. Slide the co ver along the ramps and into place on the chassis. 3. T ighten the two captiv e t ...
Hardware Ref erence Guide 2–5 Hardware Upg rades Remo ving the Fr ont Bezel 1. Shut do wn the operating system properly , then power of f the computer and any e xternal de vices. Disconnect the po wer cord from the po wer outlet and disconnect any e xternal devices. 2. Remo ve the computer cov er . 3. Pull up on the tw o release tabs, then rotate ...
2–6 Hardware Ref erence Guide Hardware Upgr ades Installing Additional Memory The computer comes with Synchronous dynamic random access memory (SDRAM) dual inline memory modules (DIMMs). DIMMs The memory sockets on the Intel 815E and 845 chipset-based system board can be populated with industry-standard DIMMs. These memory module slots are popula ...
Hardware Ref erence Guide 2–7 Hardware Upg rades Installing DIMMs Ä CA UTION: Y our memor y module sockets ha ve gold metal contacts. When upgrading y o ur memory , it is impor tant to use memor y modules with gold metal contacts to pre vent corrosion and/or o xidation resulting from having incompatib le metals in contact with each other . Ä CA ...
2–8 Hardware Ref erence Guide Hardware Upgr ades 3. Open both latches of the memory module sock et 1 , and insert the memory module into the socket 2 . Installing a DIMM Begin b y installing a module into the socket nearest the preinstalled module, and install the modules follo wing the numerical order of the sockets. A memory module can be insta ...
Hardware Ref erence Guide 2–9 Hardware Upg rades Installing or Remo ving an Expansion Car d Remo ving an Expansion Slot Co ver 1. Shut do wn the operating system properly , then power of f the computer and any e xternal de vices, then disconnect the po wer cord from the po wer outlet. 2. Remo ve the computer cov er and locate the correct vacant s ...
2–10 Hardware Ref erence Guide Hardware Upgr ades Remo ving or Installing an Expansion Car d 1. Shut do wn the operating system properly , then power of f the computer and any e xternal de vices, then disconnect the po wer cord from the po wer outlet. 2. Remo ve the computer cov er . 3. If installing an e xpansion card, skip to step 8. 4. T o rem ...
Hardware Ref erence Guide 2–11 Hardware Upg rades 7. Store the card in anti-static packaging. 8. Install an e xpansion slot cover or ne w expansion card to close the open slot. 9. If not installing a ne w expansion card, skip to step 11. 10. T o install a ne w expansion card in an open slot, remo ve the expansion slot co ver . 11. Slide the expan ...
2–12 Hardware Ref erence Guide Hardware Upgr ades Drive P ositions T o verify the type and size of the storage de vices installed in your computer , run Compaq Computer Setup. Refer to the Computer Setup Guide for more information. ✎ Dri ve bay numbers are stamped on the chassis, behind the front bezel. 1 One standard 3.5-inch, 1.44-MB diskette ...
Hardware Ref erence Guide 2–13 Hardware Upg rades Remo ving a Drive from the Drive Ba y 1. Shut do wn the operating system properly , then power of f the computer , disconnect the power cord from the po wer outlet, and re move t he co mp ute r c over . 2. Remo ve the front bezel. 3. Disconnect the dri ve po wer and signal cables and, if it is a C ...
2–14 Hardware Ref erence Guide Hardware Upgr ades Removing a Drive fr om the Drive Bay 7. Remo ve the driv e from the drive bay and store in anti-static packaging. Installing Additional Drives The computer supports up to fi ve dri ves which may be installed in v arious configurations. When installing additional dri ves, follo w these guidelines: ...
Hardware Ref erence Guide 2–15 Hardware Upg rades Ä CA UTION: T o pre vent loss of w ork and damage to the computer or dr ive: ■ If you are inserting or removing a hard drive, shut do wn the operating system properly , then turn off the computer. Do not remov e a hard dr ive while the computer is on or in standb y mode. ■ Befo re handling a ...
2–16 Hardware Ref erence Guide Hardware Upgr ades Connecting Cables Remov e the appropriate bezel blank from the front bezel. See the section “Removing Bezel Blanks” for more information. 7. Replace the front bezel. 8. Replace the computer co ver . 9. Reconf igure the computer , if necessary . Installing a Har d Drive into a 3.5-inch Drive Ba ...
Hardware Ref erence Guide 2–17 Hardware Upg rades 3. Lift up on the po wer switch bracket, then rotate do wn to gain access to the dri ve bay . Removing the P ower Switch Bracket 4. Insert the hard dri ve into the bay from the front of the chassis. Push it in until it locks into place. ✎ Be sure that the po wer switch LED cables remain under th ...
2–18 Hardware Ref erence Guide Hardware Upgr ades 5. Connect the signal 1 and po wer 2 cables to the hard driv e. Connecting Cables 6. Connect the opposite end of the cables to the appropriate system board connector . 7. Lift the po wer switch bracket up and into position on the front of the chassis. 8. Replace the front bezel. 9. Replace the com ...
Hardware Ref erence Guide A–1 A Specifications 3 Compaq Ev o Desktop (Intel P entium 4) Dimensions Height Width Depth 5.72 in 15.25 in 17.90 in 14.53 cm 38.74 cm 45.47 cm Appro ximate Weight 25 lb 11.34 kg W eight Supported (maximum distributed load) 100.0 lb 45.5 kg T emperature Range Operating Nonoperating 50 ° to 95 ° F -4 ° to 140 ° F 10 ...
A–2 Hardware Ref erence Guide Specifications P ower Output 235 W 235 W Rated Input Current (maximum)* 4 A 2 A Heat Dissipation Maximum Nominal 1234 BTU/hr 617 BTU/hr 311 kg-cal/hr 155 kg-cal/hr *This system utilizes a full-r anging, active po wer f actor corrected power supply to g reatly reduce the input current amplitude and harmonics. No input ...
Hardware Ref erence Guide A–3 Specifications P ower Suppl y Operating V oltage Range Rated V oltage Range* Rated Line F requency 90-132 V AC 100-127 V AC 50-60 Hz 180-264 V AC 200-240 V AC 50-60 Hz P ower Output 145 W 145 W Rated Input Current (maximum)* 5 A 2.5 A Heat Dissipation Maximum Nominal 760 BTU/hr 380 BTU/hr 192 kg-cal/hr 96 kg-cal/hr * ...
A–4 Hardware Ref erence Guide Specifications ...
Hardware Ref erence Guide B–1 B Har d Drive Installation Guidelines Using the Cable-Select Feature with Ultra A T A Devices Optional dri ves are a vailable from Compaq in kits that include a special dri ve cable. The conf iguration of the dri ve employs a cable-select feature that identifies the dri ve as de vice 0 (primary dri ve) or de vice 1 ( ...
B–2 Hardware Ref erence Guide Hard Drive Installation Guidelines Guidelines f or Installing Ultra A T A Devices When installing additional Ultra A T A dri ves, follow these guidelines: ■ If using multiple Ultra A T A de vices, Compaq recommends that the de vices be split between the primary and secondary Ultra A T A channels for optimum perform ...
Hardware Ref erence Guide B–3 Hard Drive Installation Guidelines SCSI De vices This section contains information relating to SCSI de vice guidelines and installation. Guidelines f or Using SCSI Devices When installing and operating SCSI de vices, you must follow these guidelines: ■ A single Ultra SCSI controller supports up to se ven SCSI de vi ...
B–4 Hardware Ref erence Guide Hard Drive Installation Guidelines ■ Every SCSI chain or circuit must be terminated (closed) at both ends. T ermination can be accomplished through one of the follo wing methods: ❏ Using a cable with a built-in terminator . This cable was shipped with your computer . ❏ Using a cable with a terminating resistor ...
Hardware Ref erence Guide B–5 Hard Drive Installation Guidelines Guidelines f or Installing Optional SCSI Devices ✎ If you mix Ultra A T A and SCSI hard dri ves in the same system, the Ultra A T A dri ve will be the boot driv e unless the boot order is changed in the F10 Setup. When replacing a hard dri ve, the replacement dri ve should be of t ...
B–6 Hardware Ref erence Guide Hard Drive Installation Guidelines SCSI Cables The front dri ve bays are a v ailable for installing or connecting mass storage SCSI de vices. Using a SCSI Cable Select models ship with a multimode SCSI cable that supports Lo w V oltage Dif ferential (L VD) or single-ended de vices. The cable accommodates up to three ...
Hardware Ref erence Guide B–7 Hard Drive Installation Guidelines A menu displays with the follo wing options: ■ Configure/V ie w Host Adapter Settings ❏ SCSI Bus Interface Def initions ◆ Host Adapter SCSI ID ◆ SCSI Parity Checking ◆ Host Adapter SCSI T ermination ❏ Additional Options ◆ Boot De vice Options ◆ SCSI De vice Configura ...
B–8 Hardware Ref erence Guide Hard Drive Installation Guidelines T o determine if your computer contains a Quiet Dri ve or to acti vate Quiet mode, complete the follo wing steps: 1. T urn on or restart the computer . If you are in W indows, click Start > Shut Do wn > Restart the Computer . 2. When the F10 = Setup message displays in the lo ...
Hardware Ref erence Guide C–1 C Battery Replacement The battery that comes with your computer provides po wer to the real-time clock and has a minimum lifetime of about three years. When replacing the battery , use a battery equiv alent to the battery originally installed on your computer . Y our computer comes with a 3-volt lithium coin cell bat ...
C–2 Hardware Ref erence Guide Batter y Replacement Ä CA UTION: Static electr icity can damage the electronic components of the computer or optional equipment. Bef ore beginning these procedures, ensure that y ou are discharged of static electricity by briefly touching a grounded metal object. 1. If you ha ve locked the Smart Co ver Lock, use Com ...
Hardware Ref erence Guide C–3 Battery Replacement b . Slide the replacement battery into position, positi ve side up. The battery holder automatically secures the battery in the proper position. T ype 2 a. T o release the battery from its holder , squeeze the metal clamp that extends abo ve one edge of the battery . b . When the battery pops up, ...
C–4 Hardware Ref erence Guide Batter y Replacement c. T o insert the ne w battery , slide one edge of the replacement battery under the holder’ s lip with the positi ve side up. Push the other edge do wn until the clamp snaps ov er the other edge of the battery . Replacing a Coin Cell Battery (T ype 2) ✎ After the battery has been replaced, u ...
Hardware Ref erence Guide D–1 D Security Loc k Pro v isions Installing a Security Loc k There are se veral dif ferent security locks that may be used to secure the computer . The follo wing illustrations portray some of the av ailable security provisions which v ary by model. Because of chassis dif ferences, the slots may be located in a differen ...
D–2 Hardware Ref erence Guide Security Lock Pro visions Installing Compaq T ype 2 Security Bracket (ma y vary by model) Å W ARNING: T o avoid injury , use care in handling the separated pieces of the security brack et; metal edges may be sharp. Be sure to install the brac ket so that sharp edges do not extend from the edges of the computer chass ...
Hardware Ref erence Guide D–3 Security Lock Provisions Installing a Kensington Cable Loc k with a Compaq T ype 2 Bracket (ma y vary by model) Å W ARNING: T o avoid injury , use care in handling the separated pieces of the security brack et; metal edges may be sharp. Be sure to install the brac ket so that sharp edges do not extend from the edges ...
D–4 Hardware Ref erence Guide Security Lock Pro visions Installing a Kensington Cable Loc k (may vary b y model) Installing a Kensington Cable Loc k (may vary b y model) ...
Hardware Ref erence Guide E–1 E Electr ostatic Dischar ge A discharge of static electricity from a f inger or other conductor may damage system boards or other static-sensiti ve de vices. This type of damage may reduce the life expectanc y of the de vice. Pre venting Electrostatic Dama g e T o pre vent electrostatic damage, observ e the following ...
E–2 Hardware Ref erence Guide Electrostatic Discharge ■ Use heelstraps, toestraps, or bootstraps at standing workstations. W ear the straps on both feet when standing on conducti ve floors or dissipating floor mats. ■ Use conducti ve f ield service tools. ■ Use a portable field service kit with a folding static-dissipating work mat. If you ...
Hardware Ref erence Guide F–1 F Routine Computer Care and Shipping Preparation Routine Computer Care Follo w these suggestions to take care of your computer and monitor: ■ Operate the computer on a sturdy , lev el surface. Lea ve a 3-inch (7.6-cm) clearance at the back of the system unit and abov e the monitor to permit the required airflo w . ...
F–2 Hardware Ref erence Guide Routine Computer Care and Shipping Preparation CD-R OM Drive Precautions Be sure to observe the follo wing guidelines while operating or cleaning your CD-R OM driv e. Operation ■ Do not mov e the dri ve during operation. This may cause it to malfunction during reading. ■ A void e xposing the dri ve to sudden chan ...
Hardware Ref erence Guide F–3 Routine Computer Care and Shipping Preparation Shipping Preparation Follo w these suggestions when preparing to ship your computer: 1. Back up the hard dri ve f iles on PD discs, tape cartridges, or diskettes. Be sure that the backup media is not e xposed to electrical or magnetic impulses while stored or in transit. ...
F–4 Hardware Ref erence Guide Routine Computer Care and Shipping Preparation ...
Hardware Ref erence Guide Index–1 B battery replacement C–1 bezel blanks, removing 2–5 C CD-ROM drive busy indicator 1–2 eject button 1–2 installing 2–15 Components Keyboard 1–4 components front panel 1–2 rear panel 1–3 computer access panel, removing 2–3 computer access panel, replacing 2–4 computer care F–1 D depth A–1 , ...
Index–2 Hardw are Reference Guide Inde x R removing bezel blanks 2–5 computer access panel 2–3 drive from drive bay 2–13 , 2–14 expansion card 2–9 expansion slot cover 2–9 front bezel 2–5 S SCSI controller B–5 SCSI device guidelines B–3 SCSISelect utility B–6 security lock provisions D–1 serial connector 1–3 serial number ...
Compaq 243850-002のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 243850-002の取扱説明書
- Compaqの製品カード
- パンフレット
- またはCompaq 243850-002の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Compaq 243850-002の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Compaq 243850-002の取り付け説明書、サービスマニュアル、簡易説明書、またはCompaq 243850-002のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Compaq 243850-002の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Compaq 243850-002デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCompaq 243850-002を使用するのを助ける技術的文書のことです。説明書は通常、全てのCompaq 243850-002ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Compaqの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Compaq 243850-002の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCompaq 243850-002の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Compaq 243850-002に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Compaq 243850-002デバイスの基本機能を使うにあたってのヒント。 Compaq 243850-002のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Compaq 243850-002に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCompaq 243850-002のメーカー/サービスへの連絡先に関する情報。
Compaq 243850-002についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもCompaq 243850-002の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCompaq 243850-002で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。