-
Haier XPB60-113S - page 1
T win-tub Washing Machine User's manual This manual is for XPB60-113S Please read this manual carefully before using. Retain it for future reference. T win-tub Washing Machine with Pump User's manual ...
-
Haier XPB60-113S - page 2
17 Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answer to question ...
-
Haier XPB60-113S - page 3
Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that sy ...
-
Haier XPB60-113S - page 4
Safety precautions Please insert the power cord into special receptacle with rated vol- tage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily ...
-
Haier XPB60-113S - page 5
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall not ...
-
Haier XPB60-113S - page 6
4 Put the underside of the lint filter into overflow filter then push the upside into overflow filter After installation, please refer that the lint filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use. Installa tion and adjustment Please install and adjust the machine according to th ...
-
Haier XPB60-113S - page 7
5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5). Extend the drain hose from the side of spin tub. Extend the drain hose from the rear side Take out the drain hose from the fixing hook. Ex ...
-
Haier XPB60-113S - page 8
Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Wate r inlet hose Wa ter inlet Maximum Max. Minimum Min Medium ...
-
Haier XPB60-113S - page 9
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put up the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make ...
-
Haier XPB60-113S - page 10
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- abl ...
-
Haier XPB60-113S - page 11
WASH TIMER OFF Figure 5 DRAIN STRONG ST ANDARD WASH SELECT OR Washing sequence Wash Figure 4 Figure 3 DRAIN STRONG ST ANDARD WASH SELECT OR 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powde ...
-
Haier XPB60-113S - page 12
Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow ...
-
Haier XPB60-113S - page 13
Rinse with stored water Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Standard" current. If you use "Strong&qu ...
-
Haier XPB60-113S - page 14
1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop ...
-
Haier XPB60-113S - page 15
After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of ...
-
Haier XPB60-113S - page 16
Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around t ...
-
Haier XPB60-113S - page 17
T ro uble-shooting Ans wer to question When the remained water is frozen If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle it. 2.Install After install the back edge of t ...
-
Haier XPB60-113S - page 18
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena T ...
-
Haier XPB60-113S - page 19
W ater inlet hose Water-filling jointer Gland Lint filter Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One piece One piece One set Specification W ater level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(MPa ) Rated washing /spinning capacity(kg) 6.0/6.0 17 0.02~ ...
Haier XPB60-113Sについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHaier XPB60-113Sの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHaier XPB60-113Sで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。