-
JVC AV32X25EI - page 1
© 2002 VICTOR COMPANY OF JAPAN, LIMITED Colour Television INSTRUCTIONS LCT1187-00 1A-U 0402-T-CR-JMU K AV32X25EK AV28X25EK AV32X25EI AV28X25EI Contents Setting up your TV . . . . . . . . . . . . . . . . . 5 TV button ...
-
JVC AV32X25EI - page 2
2 Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Avoid improper installation and never position the unit where ...
-
JVC AV32X25EI - page 3
3 Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety ...
-
JVC AV32X25EI - page 4
4 • Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage. • Never use makeshift stands or attempt to affix legs with wood screws. When using a manu ...
-
JVC AV32X25EI - page 5
5 Setting up your TV Caution • Turn off all the equipment includi ng the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For fur ...
-
JVC AV32X25EI - page 6
6 Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Putting the batteries into the Remote control Use two AAA ...
-
JVC AV32X25EI - page 7
Setting up your TV 7 2 Press the a button The LANGUAGE menu appears. 3 Press the 6 buttons to choose ENGLISH The on-screen display wi ll then be in English. To receive SKY 1 you need a satellite tuner. You must have t ...
-
JVC AV32X25EI - page 8
8 Setting up your TV Now, the initial settings are complete, and you can watch the TV • For UK model (AV32X25EK/AV28X25EK): BBC1, BBC2, ITV, Channel 4 and Channel 5 are autom atically set to the programme numbers PR ...
-
JVC AV32X25EI - page 9
Setting up your TV 9 Direct Rec “What You See Is What You Record” You can easily record to VCR the images that you are watching on the TV. For details, read the manual for your VCR. Use your VCR controls. “V ...
-
JVC AV32X25EI - page 10
10 TV buttons and functions Refer to the pages in brackets for details. 1 Remote control sensor 2 Power lamp (6, 10) 3 Main power button (6, 10) 4 Headphone jack (mini jack) (34) 5 P p buttons/ q buttons (11) 6 r (Vol ...
-
JVC AV32X25EI - page 11
11 Remote control buttons and functions 1 Muting button 2 Number butt ons 3 ZOOM button 4 HYPER SOUND button 5 Information button 6 TV button 7 5 buttons 8 Standby button 9 Colour buttons 0 a button - 6 buttons = VCR/ ...
-
JVC AV32X25EI - page 12
12 Remote control b uttons and functions Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (information) button changes the display as follows: 2 Press the 5 and 6 buttons t ...
-
JVC AV32X25EI - page 13
Remote control buttons and functions 13 To return to a TV channel: Press the b button, the 6 buttons or the number buttons. To use the program me number PR 0 (AV): When the TV and VCR are connected only by the aerial ...
-
JVC AV32X25EI - page 14
14 Remote control b uttons and functions FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. • For 16:9 aspect ratio pictures that have been squ ...
-
JVC AV32X25EI - page 15
Remote control buttons and functions 15 Displaying the current time You can display the current time on the screen. Press the h (Information) button to display th e current tim e Pressing the h (Information) button ch ...
-
JVC AV32X25EI - page 16
16 Teletext function Basic operation You can view two types of teletext broadcasts on the TV: FLOF (Fastext) and WST. 1 Choose a TV chan nel with a teletext broadcast 2 Set the VCR P DVD switch to the P P P P (Text) p ...
-
JVC AV32X25EI - page 17
Teletext function 17 Hold You can hold a teletext page on the scr een for as long as you want, even while several other teletext pages are being rece ived. Press the N button To cancel the Hold function: Press the N b ...
-
JVC AV32X25EI - page 18
18 Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’ s functions, you need to understan d the basic menu operating techniques fully. Basic operation 1 Press the ...
-
JVC AV32X25EI - page 19
Using the TV’s menu 19 PICTURE SETTING TINT You can select one of three TINT modes (three kinds of picture settings) to adjust the picture settings automatically. COOL: A cool white colour base with a boost in t ...
-
JVC AV32X25EI - page 20
20 Using the TV’s menu MIN: The level of the DIGITAL VNR effect is set to the minimum. If y ou set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, ...
-
JVC AV32X25EI - page 21
Using the TV’s menu 21 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the ...
-
JVC AV32X25EI - page 22
22 Using the TV’s menu HYPER SOUND You can enjoy sounds with a wider ambience. ON: This function is turned on. OFF: This function is turned off. The menu disappears. • The HYPER SOUND function does not work pr ...
-
JVC AV32X25EI - page 23
Using the TV’s menu 23 • The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S-VIDEO input) in the EXT-1 termi nal. • Setting S-IN (S-VIDEO input) changes the head charact er ...
-
JVC AV32X25EI - page 24
24 Using the TV’s menu • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. • When you choose an EXT terminal as an output, you can view a TV progra ...
-
JVC AV32X25EI - page 25
Using the TV’s menu 25 2 Set the ID number to your liking 1 Press the 6 buttons to choo se a number. 2 Press the 5 buttons to move the cursor. 3 Press the a button The Sub-menu of CHILD LOCK appears. 4 Press the 6 b ...
-
JVC AV32X25EI - page 26
26 Using the TV’s menu DECODER (EXT-2) You can only use this function if you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal. To use thi s function, see ? ...
-
JVC AV32X25EI - page 27
Using the TV’s menu 27 3 Press the a button to display the T-V LINK menu 4 If you do no t have a T-V LINK compatible VCR connected: Press the b button to le ave the T-V LINK menu. The T-V LINK menu disappears and al ...
-
JVC AV32X25EI - page 28
28 Using the TV’s menu 2 Follow the descriptio n for a function you want to use MOVE: This function changes a programme number (PR) of a TV channel. ID: This function registers a channel name (ID) to a TV channel. I ...
-
JVC AV32X25EI - page 29
Using the TV’s menu 29 3 Press the 6 buttons to choose the first character of a channel name (ID) you want to give the TV channel 4 Press the blue button to display the ID LIST (channel name list) 5 Press the 6 butt ...
-
JVC AV32X25EI - page 30
30 Using the TV’s menu DELETE 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) ...
-
JVC AV32X25EI - page 31
31 Additional menu operations Using the ACI function This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data. Using the ACI function allows all TV channels transmitt ed from the cable T ...
-
JVC AV32X25EI - page 32
32 Additional menu operations Downloading data to a VCR You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function. • You can only do this when a T-V LINK compatible VCR is connected to ...
-
JVC AV32X25EI - page 33
Additional menu operations 33 7 Follow “Downloa ding data to a VCR” on page 32 to transmit the programme number (PR) data to the VCR 8 If you have another TV channel yo u want to unscramble using a decoder, repe a ...
-
JVC AV32X25EI - page 34
34 Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connectin g anything: • Read the manuals that came with the ...
-
JVC AV32X25EI - page 35
Additional preparation 35 Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-V HS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO s ...
-
JVC AV32X25EI - page 36
36 Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if ...
-
JVC AV32X25EI - page 37
Troubleshooting 37 Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “Sound Adjustment” on page 21. • When TV channel reception is poor, it can be hard to hear stereo o ...
-
JVC AV32X25EI - page 38
38 Specifications * : A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating the colour of the TV set. We may change the design and specific ations without ...
-
JVC AV32X25EI - page 39
Specifications 39 * : A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating the colour of the TV set. We may change the design and specific ations without ...
JVC AV32X25EIについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもJVC AV32X25EIの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC AV32X25EIで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。