-
Smeg Electrical Built-in Hot Plates SBC30 - page 1
Dear User, we are sincerely grateful to you for purchasing one of our products. We are sure that the appliance modern, functional and easy to use, built with the finest materials and components will satisfy all your needs. We would ask that you read the instructions within this booklet very carefully so as to enable you to obtain quality results fr ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 2
18 DESCRIPTION OF THE HOT PLA TES TYPE: PFVZ 60 TYPE: PFVZ 70 TYPE: PFVZ 02 1 Radiant electric heating element Ø 145 mm 1200 W 2 Radiant electric heating element Ø 180 mm 1700 W 3 Radiant electric heating element double cooking zone (conc.) Ø 180/120 mm 1700 W (“Hi-light” as well) 4 Radiant electric heating element double cooking zone (oval) ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 3
19 USE 1) ELECTRIC HOB The hot plates are equipped with 4 radiant heating elements with different powers and diameters. Cooking zones are aesily identifiables thanks to the circles (see illustration in description) on the top; relative powers are listed in the scheme n.1. On the frontal panel, close to each knob, has been silk-screened a scheme whe ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 4
20 USE SCHEME 1 1 145 Radiant 1200 1 2 180 Radiant 1700 1 - 4 (1800 if "Hilight") 4 265/170 Radiant 2200 8 - 10 (oval) (2400 if "Hilight") 3 180/120 Radiant 1700 4 - 8 (conc.) Zone Diameter Heating Power Energy n° in mm element W regulators 12 10 - 12 To heat foods, thaw deep-frozen foods, to cook fruits and pulses. To melt but ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 5
21 USE W ARNINGS: For a correct use, please look at fig. 2 and remind: - Switch on the electricity only after having placed the pot on the cooking zone. - Use pots and pans with flat solid bottoms. - Use pots with the same diameter of the cooking zones. - Dry the bottom of the pot before put in on the cooking zones. - Do not scrape the pot against ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 6
22 CLEANING Before any cleaning operation, disconnect the appliance from the electric circuit. 2) ELECTRIC HOB If you want to preserve the surface clean and bright, we recommend you to use a silicone conditioner. The use of this conditioners, prior to jam-making, helps to protect the surface of the hob. It is very important to clean the surface soo ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 7
23 INST ALLA TION TECHNICAL INSTRUCTIONS FOR THE INST ALLER Installation, transformations and maintenances below listed, may only be carried out by a competent technician. A wrong installation may provoke damages to persons, animals or things, for which the builder can not be responsible. 3) INSERTING After having cleared out all the packing compon ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 8
24 INST ALLA TION 4) FIXING A special sealing strip underneath the hob for damage. Make sure it is correctly positioned with no gaps; it avoids any water infiltration. To fix in the right way the strip, please, respect the following instructions: - Fix the hooks in the relative accomodations of the body (see fig. 8 or 9). - Overturn the hob, take t ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 9
25 INST ALLA TION 5) ELECTRICAL CONNECTION The electrical connection has to be done in accordance with all electrical and installation requirements of the regulation. Before proceeding with the connection, please, verify that: - The power of the electrical system and the power of the outlets is adequate to the maximum power of the appliance (see th ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 10
26 TRANSFORMA TIONS Before any kind of transformation is necessary to cut off the electricity . 6) TRANSFORMA TION OF THE INPUT TYPE The standard equipment of the appliances is for single phase connection. In any case, under proper changes, they can be fed with a three phase system. To obtain these changes, please, follow the instructions: a) Take ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 11
27 MAINTENANCE Denominations W Radiant electric heating element Ø 145 mm 1200 Radiant electric heating element Ø 145 mm "Hi-light" 1200 Radiant electric heating element Ø 180 mm 1700 Radiant electric heating element Ø 180 mm "Hi-light" 1800 Radiant electric heating element double cooking zone conc. Ø 180/120 mm ("Hi-li ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 12
28 TECHNICAL DA T A MODEL 4 HEA TING ELEMENTS (4 RADIANTS) Voltage 230 – 240 V ~ Frequency 50/60 Hz Tot. Rating 5800 W MODEL 4 HEA TING ELEMENTS (3 RADIANTS + 1 RADIANT WITH DOUBLE ZONE CONC.) Voltage 230 - 240 V ~ Frequency 50/60 Hz Tot. Rating 5800 MODEL 4 HEA TING ELEMENTS (3 RADIANTS + 1 RADIANT WITH “HI-LIGHT” DOUBLE ZONE CONC.) Voltage ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 13
29 TECHNICAL DA T A MODEL 1 HEA TING ELEMENT (1 RADIANT WITH DOUBLE ZONE OV AL) Voltage 230 – 240 V ~ Frequency 50/60 Hz Tot. Rating 2200 W MODEL 1 HEA TING ELEMENT (1 RADIANT WITH “HI-LIGHT” DOUBLE ZONE OV AL) Voltage 230 - 240 V ~ Frequency 50/60 Hz Tot. Rating 2400 W MODEL 2 HEA TING ELEMENTS (2 RADIANTS “HI-LIGHT”) Voltage 230 – 240 ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 14
30 TECHNICAL ASSIST ANCE AND SP ARE P ARTS This appliance, before leaving the factory, has been carefully tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attentio ...
-
Smeg Electrical Built-in Hot Plates SBC30 - page 15
32 ...
Smeg Electrical Built-in Hot Plates SBC30についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもSmeg Electrical Built-in Hot Plates SBC30の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSmeg Electrical Built-in Hot Plates SBC30で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。