日本語 dropdown-ico

NETGEAR WNCE3001-100NASの取扱説明書

27ページ 1.07 mb
ダウンロード

ページに移動 of 27

Summary
  • NETGEAR WNCE3001-100NAS - page 1

    350 East Plumeria Drive San Jose, CA 95134 USA November 2011 202-10876-01 v1.0 Universal Dual Band WiFi Internet Adapter (WNCE3001) User Manual ...

  • NETGEAR WNCE3001-100NAS - page 2

    2 Universal Dual Band WiFi Internet Adapter (WNCE3001) © 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing N ...

  • NETGEAR WNCE3001-100NAS - page 3

    3 Table of Contents Chapter 1 Getting Started Unpack Your Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Top Panel with LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • NETGEAR WNCE3001-100NAS - page 4

    4 1 1. Getting Started Unpack Your Adapter Open the box and remove the Internet adapter, cables, and installation guide. WNCE3001 Ethernet cable USB power cable Power adapter Stand Wall-mount sticker Figure 1. Package contents Your box should contain the following items: • Universal Dual Band WiFi Internet Adapter (WNCE3001) • Stand • USB pow ...

  • NETGEAR WNCE3001-100NAS - page 5

    Getting Started 5 Universal Dual Band WiFi Internet Adapter (WNCE3001) Hardware Features Top Panel with LED The WNCE3001 has one LED, which indicates the power and wireless connection status. Top panel LED status Activity Off Unit is not powered on. Solid red Link quality is poor, based on the link rate, or the USB does not supply enough power. Bli ...

  • NETGEAR WNCE3001-100NAS - page 6

    Getting Started 6 Universal Dual Band WiFi Internet Adapter (WNCE3001) Power Connection Options You can power on your Internet adapter using either of these methods: • Connect the WNCE3001 to an electrical outlet with the included power adapter. Figure 3. Power adapter • Connect the WNCE3001 to any USB port with the included USB power cable: Fi ...

  • NETGEAR WNCE3001-100NAS - page 7

    Getting Started 7 Universal Dual Band WiFi Internet Adapter (WNCE3001)  To install your Internet adapter: 1. Carefully peel off the protective film covering your adapter. Figure 5. Peel off the protective film 2. You use a computer to set up the Internet adapter. During setup, make sure that your computer is not connected to a router. You can re ...

  • NETGEAR WNCE3001-100NAS - page 8

    Getting Started 8 Universal Dual Band WiFi Internet Adapter (WNCE3001) 6. Disconnect the Ethernet and USB cables from your computer. 7. Connect the Internet adapter t o your TV, XBox, or Blu-ray player. If your device does not have a USB port, then use the power adapter cable that came with your Internet adapter, and plug it into an electrical outl ...

  • NETGEAR WNCE3001-100NAS - page 9

    Getting Started 9 Universal Dual Band WiFi Internet Adapter (WNCE3001) 9. Congratulations! Your installation is complete. You can return your computer to its usual setup and begin using the Internet adapter. Prepare to Change Your Internet Adapter Settings If you want to change the settings for the Internet adapter after installation, then you need ...

  • NETGEAR WNCE3001-100NAS - page 10

    Getting Started 10 Universal Dual Band WiFi Internet Adapter (WNCE3001) Unless you changed the settings on the Firmware Upgrade screen (see Upgrade the Firmware on page 17), the software automatically checks for new firmware at the NETGEAR website. Then the following screen displays: The Device Status screen shows what the current settings are for ...

  • NETGEAR WNCE3001-100NAS - page 11

    Getting Started 11 Universal Dual Band WiFi Internet Adapter (WNCE3001) 2. From the menu on the left, select Setup Wizard . The following screen displays: This is the same Smart Wizard that displays during installation as described in the Installation Guide . 3. You can select a network from the list, or select the Manually input my wireless SSID r ...

  • NETGEAR WNCE3001-100NAS - page 12

    12 2 2. Advanced Settings To change advanced settings, connect the Internet adapter to your computer, and use your Internet browser to go to http://www.mywifiext.net as described in Prepare to Change Your Internet Adapter Settings on page 9. Device Status Screen When you connect to http://www.mywifiext.net, after the automatic firmware check, the D ...

  • NETGEAR WNCE3001-100NAS - page 13

    Advanced Settings 13 Universal Dual Band WiFi Internet Adapter (WNCE3001) The following table describes the fields in the Device Status screen. Table 1. Device Status settings Field Description Device Status Hardware Version The hardware version of the Internet adapter. Firmware Version The current firmware version of the Internet adapter. If you u ...

  • NETGEAR WNCE3001-100NAS - page 14

    Advanced Settings 14 Universal Dual Band WiFi Internet Adapter (WNCE3001) Show Statistics On the Device Status screen, click Show Statistics : Table 2. Show Statistics fields Field Description LAN or WLAN The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each port, the screen displays the following: Status The link status of th ...

  • NETGEAR WNCE3001-100NAS - page 15

    Advanced Settings 15 Universal Dual Band WiFi Internet Adapter (WNCE3001) DHCP Connection Status On the Device Status screen, click DHCP Connection Status : This screen shows the status of the Internet connection. Table 3. Connection Status fields Field Description IP Address The IP address of the wireless network router. Subnet Mask The subnet mas ...

  • NETGEAR WNCE3001-100NAS - page 16

    Advanced Settings 16 Universal Dual Band WiFi Internet Adapter (WNCE3001) This screen shows whether the Internet adapter is set to get its IP address dynamically from the router (this is the most common setting), or is set with a static IP address. • Get Dynamically From Router . The wireless network router assigns an IP address when the Internet ...

  • NETGEAR WNCE3001-100NAS - page 17

    Advanced Settings 17 Universal Dual Band WiFi Internet Adapter (WNCE3001) Restore Settings 1. On the Backup Settings screen, click Browse . 2. Locate and select the previously saved backup file. 3. Click Restore . A screen displays letting you know that the device has been successfully restored to the previous settings. The Internet adapter restart ...

  • NETGEAR WNCE3001-100NAS - page 18

    Advanced Settings 18 Universal Dual Band WiFi Internet Adapter (WNCE3001)  To check for firmware and upgrade if it is available: 1. From the Internet adapter menu at http://www.mywifiext.net, under Maintenance, select Firmware Upgrade . The following screen displays: 2. Click Check to see if new firmware is available. If it is, follow the onscre ...

  • NETGEAR WNCE3001-100NAS - page 19

    Advanced Settings 19 Universal Dual Band WiFi Internet Adapter (WNCE3001) • CTS/RTS Threshold (1-2347) : The packet size that is used to determine whether the Internet adapter should use the CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) mechanism for wireless packet transmission. Use Push 'N' Connect (WPS) WPS (Wi-Fi ...

  • NETGEAR WNCE3001-100NAS - page 20

    Advanced Settings 20 Universal Dual Band WiFi Internet Adapter (WNCE3001) • When WPS is running, the LED blinks, alternating between green and amber. • If the computer does not connect with WPS, the LED alternately blinks red and green for 5 seconds. • If the computer connects using WPS, the LED switches to show the link quality: solid green, ...

  • NETGEAR WNCE3001-100NAS - page 21

    21 3 3. Troubleshooting Using the USB Power Cable You can connect the USB power cable to a USB port on a nearby device. If the Internet adapter is not getting enough power, the following can occur: • The LED is red right after the adapter is powered on. • The Internet adapter resets itself intermittently or turns itself off. • The Internet ad ...

  • NETGEAR WNCE3001-100NAS - page 22

    Troubleshooting 22 Universal Dual Band WiFi Internet Adapter (WNCE3001) If the problem continues, make sure that your Ethernet cable is securely connected to the Internet adapter and the computer, and that the LED on the computer’s Ethernet port is on. If it is not, reconnect the Ethernet cable, and relaunch your Internet browser. Connect to Wire ...

  • NETGEAR WNCE3001-100NAS - page 23

    23 A A. Factory Settings and Technical Specifications Factory Settings You can use the Reset button on the rear panel to return your adapter to its factory settings. Reset button Figure 10. The Reset button restores factory settings Use a pin or paperclip to press the Reset button and hold it for 5 seconds until the power LED blinks amber. Factory ...

  • NETGEAR WNCE3001-100NAS - page 24

    Factory Settings and Technical Specifications 24 Universal Dual Band WiFi Internet Adapter (WNCE3001) Technical Specifications Feature Description Antenna 2 PCB antennas Standards 802.11a, 802.11n, 802.11g, or 802.11b Radio data rate Auto Rate Sensing Operating frequency ranges – 2.4GHz 2.4 GHz to 2.5 GHz (CCK and OFDM Modulation) Operating frequ ...

  • NETGEAR WNCE3001-100NAS - page 25

    25 B B. Notification of Compliance Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Safety and Regulatory Noti ...

  • NETGEAR WNCE3001-100NAS - page 26

    Notification of Compliance 26 Universal Dual Band WiFi Internet Adapter (WNCE3001) RF Exposure Information The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model me ...

  • NETGEAR WNCE3001-100NAS - page 27

    Notification of Compliance 27 Universal Dual Band WiFi Internet Adapter (WNCE3001) Latviski [Latvian] Ar šo NETGEAR, Inc. deklarç, ka Universal Dual Band WiFi Internet Adapter (WNCE3001) atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un citiem ar to saistîtajiem noteikumiem. Lietuviø [Lithuanian] Šiuo NETGEAR, Inc. deklaruoja, kad šis ...

メーカー NETGEAR カテゴリー Network Hardware

NETGEAR WNCE3001-100NASのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WNCE3001-100NASの取扱説明書
- NETGEARの製品カード
- パンフレット
- またはNETGEAR WNCE3001-100NASの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NETGEAR WNCE3001-100NASの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、NETGEAR WNCE3001-100NASの取り付け説明書、サービスマニュアル、簡易説明書、またはNETGEAR WNCE3001-100NASのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NETGEAR WNCE3001-100NASの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

NETGEAR WNCE3001-100NASデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNETGEAR WNCE3001-100NASを使用するのを助ける技術的文書のことです。説明書は通常、全てのNETGEAR WNCE3001-100NASユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

NETGEARの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. NETGEAR WNCE3001-100NASの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNETGEAR WNCE3001-100NASの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NETGEAR WNCE3001-100NASに関してこのドキュメントで見つけることができる全てのヒントの目次
3. NETGEAR WNCE3001-100NASデバイスの基本機能を使うにあたってのヒント。 NETGEAR WNCE3001-100NASのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NETGEAR WNCE3001-100NASに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNETGEAR WNCE3001-100NASのメーカー/サービスへの連絡先に関する情報。

NETGEAR WNCE3001-100NASについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもNETGEAR WNCE3001-100NASの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNETGEAR WNCE3001-100NASで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)