Maxtor 300の取扱説明書

73ページ 0.83 mb
ダウンロード

ページに移動 of 73

Summary
  • Maxtor 300 - page 1

    Maxtor ® Quickvie w 300 80/100/120/160/200/250/300GB P A T A Product Manual May 24, 2005 Part Number: 000001922 ...

  • Maxtor 300 - page 2

    May 24, 2005 Maxtor Corp oration. All rights reserved. Printed in U.S.A. This publication could include technical inaccuracies or typogr aphical errors. Change s are periodically made to the information herein – which w ill be incorporated in revised editi ons of the publication. Maxtor may make changes or improvemen ts in th e product(s) describ ...

  • Maxtor 300 - page 3

    Maxtor reserves the right to make changes and impr ovements to its products, w ithout incurring any obliga- tion to incorporate such changes or improvemen ts into units previously sol d or shipped. This product or docu ment is protected by copyright a nd distributed under licences restricting its use, copy- ing, distribut ing, and decompilation. No ...

  • Maxtor 300 - page 4

    Please do not remove or cover up Maxtor factory-inst alled drive labels. They conta in information required should the drive ever need repair .Thank you fo r your in terest in Maxtor hard disk drives. This manual pro- vides technical informatio n for OEM engineers and systems integrat ors regarding the installation and use of Maxtor hard d rives. D ...

  • Maxtor 300 - page 5

    Quickview 300 80/100/120/160/200/250/3 00GB PATA i Table of Content Chapter 1 Introduction 1.1 MAXTOR CORPORATION ............ .................... ..................... .................... ....... 1-1 1.2 AUDIENCE ............. .................... ..................... .................... ..................... .............. 1-1 1.3 MANUAL ORGA ...

  • Maxtor 300 - page 6

    Table of Contents ii Quickview 300 80/100/120/160/200/250/300 GB PATA 3.8 SYSTEM STARTUP AND OPERATION ............ .................... ....................... .... 3-18 Chapter 4 PRODUCT SPECIFICATIONS 4.1 Models and Capacities ......................... .......... ........... .................... .................. ........... 4-1 4.2 Drive Confi ...

  • Maxtor 300 - page 7

    Table of Contents Quickview 300 80/100/120/160/200/250/300GB PAT A iii Appendix A BREAKING THE 137 GIGABY TE STORAGE BARRIER 1 A.1 Breaking the 137 Gigabyte Storage Barrier ..................... ....................... ................... A-1 A.1.1 History ............ .................... ..................... .................... ................ ...

  • Maxtor 300 - page 8

    Quickview 300 80/10 0/120/160/200/250/300GB PATA iv List of Figures Figure 3-1 Mech anical Dimensions of the Quickview 300 Hard Drive ........... ............... 3-1 Figure 3-2 20-Pack Shipping Container .............. ... .................... ..................... ............... 3-3 Figure 3-3 Jumper Locations on the PATA Interf ace Connector ... ...

  • Maxtor 300 - page 9

    Quickview 300 80/100/120/160/200/2 50/300GB PATA v List of Tables Table 3-1 AT Jumper Options ........... .......... ..................... .................... ..................... ........... 3-5 Table 3-2 Cylinder Limitati on Jumper (CLJ) ............... ....................... ..................... ............... 3-7 Table 3-3 J1 Power Connect ...

  • Maxtor 300 - page 10

    Quickview 300 80/100/120/160/200/250/300GB PAT A 1-1 Chapter 1 Introduction 1.1 Maxtor Corporation Maxtor corporation is one of the world’s largest su ppliers of hard disk drive products-products that help store the digital world for millions of users. Maxtor products serve a range of markets, including personal and entertainment, small office/ho ...

  • Maxtor 300 - page 11

    Introduction 1-2 Quickview 300 80/100/120/16 0/200/250/300GB PATA 1.3 MANUAL ORGANIZATION This manual is organized in to the following chapters: • Chapter 1 – Introduction • Chapter 2 – General Description • Chapter 3 – Installation • Chapter 4 – Product Specifications • Chapter 5 – ATA Bus Interface and ATA Command s • Chapte ...

  • Maxtor 300 - page 12

    Introduction Quickview 300 80/100/120/160/200/250/300GB PAT A 1-3 • MB/s megabytes per second • MHz m egahertz • ms milliseconds • MSB most significant bit • mV millivolts • ns nanoseconds • PATA Parallel ATA • PC Personal Computer • SPS Shock Protection System • tpi tracks per inch • µs microseconds •V v o l t s The typogr ...

  • Maxtor 300 - page 13

    Introduction 1-4 Quickview 300 80/100/120/16 0/200/250/300GB PATA Naming Conventions: • Host: In general, the system in which the drive resides is referred to as the host. 1.5 REFERENCES For additional information about the ATA interface, refer to the latest revision of the draft standard on th e internet at http://www.t13.org/ using the link und ...

  • Maxtor 300 - page 14

    Quickview 300 80/100/120 /160/200/250/300GB PATA 2-1 Chapter 2 GENERAL DESCRIPTION This chapter summarizes the general functions and key features of the Quickview 300 80/100/120/160 /200/250/300GB PATA hard disk drives, as well as the applicable standards and regulations. 2.1 PRODUCT OVERVIEW Maxtor’s Quickview 300 PATA hard disk drives are part ...

  • Maxtor 300 - page 15

    General Description 2-2 Quickview 300 80/100/120/16 0/200/250/300GB PATA •E m u l a t i o n o f I B M ® PC AT ® task file register, and all AT fixed disk commands Performance • Average seek time of <9.0 ms (increased in Quiet Mode) • Average rotational latency of 4.17 ms • New Ultra ATA interface with Maxtor-patented Ultra ATA/133 prot ...

  • Maxtor 300 - page 16

    General Description Quickview 300 80/10 0/120/160/200/250/300GB PATA 2-3 Versatility • Quiet mode • Power saving modes • Downloadable firmware • Cable select feature • Ability to daisy-chain two drives on the interface 2.3 REGULATORY COMPLIANCE STANDARDS Maxtor Corporation’s disk drive products meet all domestic and international produc ...

  • Maxtor 300 - page 17

    Quickview 300 80/100/120/160/200/250 /300GB PATA 3-1 Chapter 3 INSTALLATION This chapter explains how to unpack, configure, mount, and connect the Maxtor Quickview 300 80/100/120/160 /200/250/300GB PATA hard disk drive prior to operation. It also explains how to start up and operate the drive. 3.1 SPACE REQUIREMENTS The Quickview 300 hard disk driv ...

  • Maxtor 300 - page 18

    Installation 3-2 Quickview 300 80/100/120/160/20 0/250/300GB PATA 3.2 UNPACKING INSTRUCTIONS 1. Open the shipping container and remove the packing assembly that contains the drive. 2. Remove the drive from the packing assembly. 3. When you are ready to install the drive, remove it from the ESD bag. CAUTION: The maximum limits for physical shock can ...

  • Maxtor 300 - page 19

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-3 Figure 3-2 Quickview 300 20-Pack Shipping Container ...

  • Maxtor 300 - page 20

    Installation 3-4 Quickview 300 80/100/120/160/20 0/250/300GB PATA 3.3 HARDWARE OPTIONS 3.3.1 PATA Interface Connector The configuration of a Quickview 300 PATA hard disk drive depends on the host system in which it is to be installed. This section describes the hardware options that you must take into account prior to installation. Figure 3-3 Jumpe ...

  • Maxtor 300 - page 21

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-5 The configuration of the follow ing thr ee jumpers controls the drive’s five modes of operation: • CS – Cable Select • DS – Drive Select • CLJ– Cylinder Limitation Jumper • POSB - Power on standby (Remote Command) The AT PCB has two jumper locations provided to config ...

  • Maxtor 300 - page 22

    Installation 3-6 Quickview 300 80/100/120/160/20 0/250/300GB PATA Master or Slave with the CS feature, the CS jumper is installed (1). The drive's position on the 80 pin cond uctor Ultra ATA data cable then determines whether the drive is a Master (Device 0) or a Slave (Device 1). If the drive is connected to the end of the Ultra (cable Select ...

  • Maxtor 300 - page 23

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-7 3.3.1.4 Power On Standby Upon power on, the drive will not spin up and will be i n a power saving mode, irrespective of the ot her jumper settings. To spin up the drive, issue a Set Feat ure (OxEF) command with a sub-code 7. In the power saving mode, the dr ive will reject all other ...

  • Maxtor 300 - page 24

    Installation 3-8 Quickview 300 80/100/120/160/20 0/250/300GB PATA Table 3-2 Cylinder Limitati on Jumper (CLJ) Figure 3-4 AT Connector and Jumper Location 300GB C = 16383 H = 16 S = 63 LBA = 586,114,704 Pin 42 Pin 44 ...

  • Maxtor 300 - page 25

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-9 3.3.2 PATA BUS ADAPTER There are two ways you can configur e a system to allow the Maxtor hard disk drives to communicate over the PATA bus o f an IBM or IBM- compatible PC: 1. Connect the drive to a 40-pin PATA bus connector (if available) on the motherboard of the PC. 2. Install an ...

  • Maxtor 300 - page 26

    Installation 3-10 Quickview 300 80/100/120/160/200/250 /300GB PATA Figure 3-5 J1 DC Power and PATA Bus Combination Connector J1 IDE (40-Pin)/DC (4-Pin) Combination Connector Pin 1 Center Key Slot 432 1 4-Pin DC Power (J1 Section A) 40-Pin IDE (J1 Section C) Pin 1 Pin 40 Pin 42 Pin 44 ...

  • Maxtor 300 - page 27

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-11 3.4.1 DC Power (J1, Section A) The recommended mating connector s for the +5 VDC and +12 VDC input power are listed in Table 3-3. Table 3-3 J1 Power Connector, Section A Note: Labels indicate the pin numbers on the connector. Pins 2 and 3 of section A are the +5 and +12 volt returns ...

  • Maxtor 300 - page 28

    Installation 3-12 Quickview 300 80/100/120/160/200/250 /300GB PATA 3.5 Mounting 3.5.1 Orientation The mounting holes on the Quickview 300 80/100/120/160/200 /250/ 300GB PATA hard disk drives allow the drive to be mounted in any orientation. Figure 3-7 and Figu re 3-6 show the location of the three mounting holes on each side of the drive. The drive ...

  • Maxtor 300 - page 29

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-13 Figure 3-7 Mounting Screw Clearance for the Maxtor Quickview 300 Hard Disk Drives CAUTION: The PCB is very close to the mounting holes. Do not ex- ceed the specified length for the mounting screws. The specified screw length allows full use of the mounting hole threads, while avoidi ...

  • Maxtor 300 - page 30

    Installation 3-14 Quickview 300 80/100/120/160/200/250 /300GB PATA 3.5.2 Clearance Clearance from the drive to any other surface (except mounting surfaces) must be a minimum of 1.25 mm (0.05 inches). 3.5.3 Ventilation The Maxtor Quickview 300 80/100/120/ 160/200/250/300GB PATA hard disk drives operate without a cooling fan, provided the base castin ...

  • Maxtor 300 - page 31

    Installation Quickview 300 80/100/120/160/20 0/250/300GB PATA 3-15 3.6.1.1 Connecting the Adap ter Board and the Drive Use a 40-pin cable to connect the drive to the board. See figure 3-8 to connect the drive to the board: 1. Insert the 80-pin conductor cable into the mating connect or of the adapter board. Make sure that pin 1 of the connector mat ...

  • Maxtor 300 - page 32

    Installation 3-16 Quickview 300 80/100/120/160/200/250 /300GB PATA 3.7 TECHNIQUES IN DRIVE CONFIGURATION 3.7.1 Operating system limitations Most popular operating systems available today have additional limitations which affect the use of large capacity drives. However, these limitations can not be corrected on the BIOS and it is up to the operatin ...

  • Maxtor 300 - page 33

    Quickview 300 80/100/120/160/20 0/250/300GB PATA 4-1 Chapter 4 PRODUCT SPECIFICATIONS 4.1 Models and Capacities 4.2 Drive Configuration MODELS 6L080PO 6L100PO 6L120PO 6L160P0 6L200P0 6L250R0 6L300R0 Formatted Capacity (GB LBA Mode) 80GB 100GB 120GB 160GB 200GB 250GB 300GB GB means 1 billion bytes. Total accessible capacity varies depe nding on oper ...

  • Maxtor 300 - page 34

    Product Specifications 4-2 Quickview 300 80/100/120/160/20 0/250/300GB PATA 4.3 Performance Specifications Data Zones per Surface 16 Data Sec- tors per Track (ID/ OD) 645/1224 Areal Density (Gbits/in 2 max, ID/ OD) 75/60.8 Record- ing Den- sity (kbpi, ID/OD) ID = 728 OD = 624 Track Density (ktpi) 95 ktpi MODELS 80GB 100GB 12 0GB 160GB 200GB 250GB 3 ...

  • Maxtor 300 - page 35

    Product Specifications Quickview 300 80/100/120/160/200/250/3 00GB PATA 4-3 4.4 Physical Dimensions Data Transfer Speed (MByte/sec max) To/From Interface (Maxtor Ultra ATA/133, up to) 133 To/From Media (ID/OD up to nn.n, where nn.n is the maximum transfer rate possible) ID = 333 OD = 619 Sustained (ID/OD up to nn.n, where nn.n is the maximum transf ...

  • Maxtor 300 - page 36

    Product Specifications 4-4 Quickview 300 80/100/120/160/20 0/250/300GB PATA 4.5 Power Requirements fo r 80/100/120/160/ 200GB (Typical) 4.5.1 Power Requirements for 250GB/300GB (Typical) 4.5.2 Voltage Tolerance MODE 12V (mA) 5V (mA) POWER (W) Spin-up (peak) 1667 617 23.1 Spin-up (peak) Max 2400 1000 33.8 Seek 849 449 12.4 Read/Write 426 484 7.5 Idl ...

  • Maxtor 300 - page 37

    Product Specifications Quickview 300 80/100/120/160/200/250/3 00GB PATA 4-5 4.6 Power Mode Definitions Spin-up The drive is spinning up following in itial application of po wer and has not yet reached full speed. Seek A random access operation by the drive. Read/Write Data is being read from or written to the drive. Idle The drive is spinning, the ...

  • Maxtor 300 - page 38

    Product Specifications 4-6 Quickview 300 80/100/120/160/20 0/250/300GB PATA 4.8 Environmental Limits Notes: 1. The testing performed by Maxtor is co nsistent with ISO 7779. Variation in acoustic levels from the id le specification may occur due to offline activity according to the SMART specif icatio n and/or atmospheric c onditions. PARAMETER OPER ...

  • Maxtor 300 - page 39

    Product Specifications Quickview 300 80/100/120/160/200/250/3 00GB PATA 4-7 Figure 4-1 Baseplate Tempurature Measurement Location Baseplate Temperature Measurment Location ...

  • Maxtor 300 - page 40

    Product Specifications 4-8 Quickview 300 80/100/120/160/20 0/250/300GB PATA 4.9 Shock and Vibration PARAMETER OPERATING NON-OPERA TING Mechanical Shock R=0.9 88/shock at 60 Gs; R= 0.999/shock at 30 Gs 2 msec, 1/2 sine R=0.90@>= 300G R=0.95@>= 250G R=0.99@>= 200G Rotational Shock R=0.988 @ 20 00 rad/sec 2 R=0.95 @ 20K r ad/sec 2 , 1ms input ...

  • Maxtor 300 - page 41

    Product Specifications Quickview 300 80/100/120/160/200/250/3 00GB PATA 4-9 4.10 Reliability Specifications Annualized Return Rate <1.0% Annualized Return Rate (ARR) indicates the average against products shipped. ARR includes all reason s for returns (failures, handling, damage, NDF) but do es not include inventory credit returns. Start/Stop Cy ...

  • Maxtor 300 - page 42

    Product Specifications 4-10 Quickview 300 80/100/120/160/200/25 0/300GB PATA 4.11.2 Canadian Emissions Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian department of comm unications. Le present appareil numerique n&ap ...

  • Maxtor 300 - page 43

    Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-1 Chapter 5 ATA BUS INTERFACE AND ATA COMMANDS This chapter describes the interface between the Quickview 300 hard disk drives and the PATA bus. The commands that are issued from the host to control the drive are liste d, as well as the electrical and mechanical characteristics of the interface. 5. ...

  • Maxtor 300 - page 44

    ATA Bus Interface and ATA Commands 5-2 Quickview 300 80/100/120/160/200/250/30 0GB PATA Hosts may assert the RESET- signal for longer than the minimum. When power is applied with RESET- asserte d, the Quickview 300 disk media will not begin to spin up until RE SET- is negated. This may reduce maximum current consumption for the overall system. 5.4 ...

  • Maxtor 300 - page 45

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-3 FLUSH CACHE E7h IDENTIFY DRIVE ECh IDLE E3h IDLE IMMEDIATE E1h NOP 00h READ BUFFER E4h READ DMA C8h READ DMA EXT 25h READ MULTIPLE C4h READ NATIVE MAX ADDRESS F8h READ SECTOR(S) 20h READ VERIFY SECTOR(S) 40h SECURITY DISABLE PASSWORD F6h SECURITY ERASE PREPARE ...

  • Maxtor 300 - page 46

    ATA Bus Interface and ATA Commands 5-4 Quickview 300 80/100/120/160/200/250/30 0GB PATA SET MULTIPLE MODE C6h SLEEP E6h SMART DISABLE OPERATIONS B0h D9h SMART ENABLE OPERATIONS B0h D8h SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE B0h D2h SMART EXECUTE OFF-LINE IMMEDIATE B0h D4h SMART READ DATA B0h D0h SMART READ LOG B0h D5h SMART RETURN STATUS B0h DAh S ...

  • Maxtor 300 - page 47

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-5 WRITE SECTOR(S) 30h Table 5-1 Supported Commands Command Command Code Feature Register Value(s) ...

  • Maxtor 300 - page 48

    ATA Bus Interface and ATA Commands 5-6 Quickview 300 80/100/120/160/200/250/30 0GB PATA Identify Drive Command This command allows the host to receive parameter information from the drive. When the command is received, the drive: 1.Sets BSY 2. Stores the required parameter information in the sector buffer 3. Sets the DRQ bit 4. Generates an interru ...

  • Maxtor 300 - page 49

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-7 10-19 Serial number (20 ASCII characters) 20-21 Retired 22 Reserved 23-26 Firmware revision (8 ASCII characters) 27-46 Model number (40 ASCII characters) 47 15-8: 80h 7-0: 00h = Reserved 01h-FFh: = Maximum number of sectors that shall be transferred per interru ...

  • Maxtor 300 - page 50

    ATA Bus Interface and ATA Commands 5-8 Quickview 300 80/100/120/160/200/250/30 0GB PATA 53 15-3: Reserved 2: 1 = the fiel ds reported in word 88 ar e valid. 0 = the fie lds reported in word 88 ar e not valid 1: 1 = the fie lds reported in words (70:64) are valid. 0 = the fie lds reported in words (70:64) are not valid 0: Obsolete 54-58 Obsolete 59 ...

  • Maxtor 300 - page 51

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-9 67 Minimum PIO transfer cycle time without flow control 15-0: Cycle time in nanoseconds 68 Minimum PIO transfer cycle time with IORDY flow control 15-0: Cycle time in nanoseconds 69-70 Reserved (for future command overlap and queuing) 71-74 Reserved for IDENTI ...

  • Maxtor 300 - page 52

    ATA Bus Interface and ATA Commands 5-10 Quickview 300 80/100/120/160/200/250/300GB PATA 81 Minor version number 0000h or FFFFh = device does not report version. 0001h-FFFEh = see 6.16.41 of ATA/ATAPI-7 specification 82 Command set supported. 15: Obsolete 14: 1 = NOP command supported 13: 1 = READ BUFFER command supported 12: 1 = WRITE BUFFER comman ...

  • Maxtor 300 - page 53

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-11 83 7: See Address Offset Reserv ed Area Boot, INCITS TR27:2001 6: 1 = SET FEATURES subcommand requi red to spinup after power-up 5: 1 = Power-Up In Standby feature set supported 4: 1 = Removable Media Status No tification feature set supported 3: 1 = Advanced ...

  • Maxtor 300 - page 54

    ATA Bus Interface and ATA Commands 5-12 Quickview 300 80/100/120/160/200/250/300GB PATA 85 7: 1 = release interrupt enabled 6: 1 = look-ahead enabled 5: 1 = write cache enabled 4: Shall be cleared to zero t o indicate that the PACKET Command feature set is not supported . 3: 1 = Power Management feature set enabled 2: 1 = Removable Media feature se ...

  • Maxtor 300 - page 55

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-13 87 6: 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands supported 5: General Purpose Loggin g feature set supported 4: 1 = Valid CONFIGURE STREAM command has been executed 3: 1 = Media Card Pass Through Command feature set enabled 2: 1 = Media serial n ...

  • Maxtor 300 - page 56

    ATA Bus Interface and ATA Commands 5-14 Quickview 300 80/100/120/160/200/250/300GB PATA 93 Hardware reset result. The contents of bits (12:0) of this word shall change only during the execution of a hardware reset 15: Shall be cleared to zero. 14: Shall be set to one. 13: 1 = device detected CBLID- above ViH. 0 = device detected CBLID- below ViL 12 ...

  • Maxtor 300 - page 57

    ATA Bus Interface and AT A Commands Quickview 300 80/10 0/120/160/200/250/300GB PATA 5-15 94 15-8: Vendor’s recommended acous tic management value. 7-0: Current automatic aco ustic manageme nt value 95 Stream Minimum Request Size 96 Stre am Transfer Time - DMA/PIO 97 Stream Access Latency - DMA 98-99 Streaming Performance Granularity 100-103 Maxi ...

  • Maxtor 300 - page 58

    ATA Bus Interface and ATA Commands 5-16 Quickview 300 80/100/120/160/200/250/300GB PATA 128 Security status 15-9: Reserved 8: Security level 0 = High, 1 = Maximum 7-6: Reserved 5: 1 = Enhanced security erase supported 4: 1 = Security count expired 3: 1 = Security frozen 2: 1 = Security locked 1: 1 = Security enabled 0: 1 = Security supported 129-15 ...

  • Maxtor 300 - page 59

    Quickview 300 80/100/120/160/200/ 250/300GB PATA 6-1 Chapter 6 SERVICE AND SUPPORT 6.1 Product Support/Technical Assistance/Customer Service For Product Service and Support Information please visit our site at: www.maxtor.com for warranty service or www.maxtorkb.com for technical support. ...

  • Maxtor 300 - page 60

    Quickview 300 80/100/120/160/200/2 50/300GB PATA A-1 Appendix A BREAKING THE 137 GIGABYTE STORAGE BARRIER This appendix provides informatio n about the 137GB storage barrier. It discusses the history, cause and the solution to overcome this barrier. A.1 Breaking the 137 Giga byte Storage Barrier Capacity barriers have been a fact of the personal co ...

  • Maxtor 300 - page 61

    Breaking the 137GB Storage Barrier A-2 Quickview 300 80/100/120/160/200/250/300 GB PATA of the hard disk was accessible. This inability to access the entire drive is referred to as a “capacity barrier” and it has been seen and overcome many times in the computer and disk drive industry. The 137-gigabyte barrier is the result of the original des ...

  • Maxtor 300 - page 62

    Breaking the 137GB Storage Barrier Quickview 300 80/100/120/160/200/2 50/300GB PATA A-3 A.1.2 Solving the 137 Gi gabyte Capacity Barrier As described earlier, the issue causing the 137-gigabyte barrier is the 28- bit addressing method of the original ATA specification. A ch ange to expand this method was required to provide m ore address bits for t ...

  • Maxtor 300 - page 63

    Breaking the 137GB Storage Barrier A-4 Quickview 300 80/100/120/160/200/250/300 GB PATA A.1.5 What Else is Involved? Effort is required from OS vendors to increase storage device addressing up to 48 bits or more. This increase will be a significant challenge for many OS vendors that have 32-bit code models. Adapting to 48-bit commands will be easy, ...

  • Maxtor 300 - page 64

    Breaking the 137GB Storage Barrier Quickview 300 80/100/120/160/200/2 50/300GB PATA A-5 Appendix B: Big Numbers • 131 kilobytes = 131,000 bytes a little more than 30 pages of text • 33 megabytes = 33,000,000 bytes more than 8,000 pages of text or 25 300-page books • 137 gigabytes = 137,000,000,000 bytes more than 100,000 books, or th e conten ...

  • Maxtor 300 - page 65

    Quickview 300 80/100/120/16 0/200/250/300GB PATA G-1 GLOSSARY A ACCESS – (v) Read, write, or update information o n some storage medium, such as a disk. (n) One of these operations. ACCESS TIME – The interval between the time a request for data is made by the system and the time the data is av ailable from the drive. Access time includes the ac ...

  • Maxtor 300 - page 66

    Glossary G-2 Quickview 300 80/100/120/160/200/250/3 00GB PATA BPI – Abbreviation for bits per inch . A measure of how densely information is packed on a storage medi um. Flux changes per inch is also a term commonly used in describing storage density on a magnetic surface. BUFFER – An area of RAM reserved for temporary storage of data that is w ...

  • Maxtor 300 - page 67

    Glossary Quickview 300 80/100/120/16 0/200/250/300GB PATA G-3 DISK CONTROLLER – A plug-in board, or embedded circuitry on the drive, that passes information to and from the disk. The Maxtor disk drives all have controllers embedded on the drive printed-circ uit board. DISKWARE – The program instructions and data stored on th e disk for use by a ...

  • Maxtor 300 - page 68

    Glossary G-4 Quickview 300 80/100/120/160/200/250/3 00GB PATA G GIGABYTE (GB) – One billion bytes ( one thousand megabyt es). GUIDE RAILS – Plastic strips attac hed to the sides of a disk drive mounted in an IBM AT and compatible computers so that the drive easily slides into place. H HALF HEIGHT – Te rm used to describe a drive that occupies ...

  • Maxtor 300 - page 69

    Glossary Quickview 300 80/100/120/16 0/200/250/300GB PATA G-5 K KILOBYTE (Kb) – A unit of measure consisting of 1,024 (2 10 ) bytes. L LANDING ZONE – A position inside the disk’s inner cylinder in a non data area reserved as a place to re st the h eads during the time that power is off. Using this area prevents the heads from touching the sur ...

  • Maxtor 300 - page 70

    Glossary G-6 Quickview 300 80/100/120/160/200/250/3 00GB PATA MTTR – Mean Time To Repair. The average time it takes to rep air a drive that has failed for some reason. This only takes into consideration the changing of the major sub-assemblies such as circuit board or sealed housing. Component level repair is not included in this number as this t ...

  • Maxtor 300 - page 71

    Glossary Quickview 300 80/100/120/16 0/200/250/300GB PATA G-7 REMOVABLE DISK – Generally said of disk drives where the disk itself is meant to be removed, and in particul ar of hard disks using disks mounted in cartridges. Their advantage is that multiple disks can be used to increase the amount of stored material, and that once removed, the disk ...

  • Maxtor 300 - page 72

    Glossary G-8 Quickview 300 80/100/120/160/200/250/3 00GB PATA SUBSTRATE – The material the disk platter is made of beneath the magnetic coating. Hard disks are generally made of aluminum or magnesium alloy (or glass, for optical disks) while the su bstrate of floppies is usually mylar. SURFACE – The top or bottom side of the platter which is co ...

  • Maxtor 300 - page 73

    Quickview 300 80/100/120/160/20 0/250/300GB PATA I-1 INDEX A abbreviations 1-1 adapter board 2-4, 3-20 C cable Select 3-7 cable select (CS) jumper 3-6 clearance 3-19 command descript ions 5-2 connector, IDE 3-11, 3-16 cooling fan requirements 3-19 D daisy-chain 2-3 daisy-chained 3-6 drive select (DS) jumper 3-7 F faceplate 3-1 floppy drive 3-20 H h ...

メーカー Maxtor カテゴリー Computer Drive

Maxtor 300のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 300の取扱説明書
- Maxtorの製品カード
- パンフレット
- またはMaxtor 300の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Maxtor 300の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Maxtor 300の取り付け説明書、サービスマニュアル、簡易説明書、またはMaxtor 300のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Maxtor 300の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Maxtor 300デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMaxtor 300を使用するのを助ける技術的文書のことです。説明書は通常、全てのMaxtor 300ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Maxtorの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Maxtor 300の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMaxtor 300の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Maxtor 300に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Maxtor 300デバイスの基本機能を使うにあたってのヒント。 Maxtor 300のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Maxtor 300に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMaxtor 300のメーカー/サービスへの連絡先に関する情報。

Maxtor 300についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMaxtor 300の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMaxtor 300で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)