日本語 dropdown-ico

Nady Systems SW-1KUの取扱説明書

24ページ 0.35 mb
ダウンロード

ページに移動 of 24

Summary
  • Nady Systems SW-1KU - page 1

    8W - 1 KU 1000-Channel UHF Dual Receiver Wireless System OWNER’S MANUAL ...

  • Nady Systems SW-1KU - page 2

    Contents 2 Introduction ............................................................................................................................. 2 Using this Manual .................................................................................................................... 2 System Features ............................................. ...

  • Nady Systems SW-1KU - page 3

    System Features 8W-1KU System • Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to500 ft. line-of-sight • 1000 user -selectable UHF frequencies per band 8W-1KU Octo Receiver • Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500 ft. line-of sight ...

  • Nady Systems SW-1KU - page 4

    4 Quick User Controls Guide 8W-1KU Receiver: Front V iew 1. POWER BUTTON Press for two seconds to turn receivers ON-OFF 2. DIVERSITY A/B INDICA TOR Indicates receiver A or B is active when transmitter is on 3. AF PEAK LED Shows flickering GREEN LED is normal or solid GREEN LED is for maximum audio allowable 4. IR Infrared LED transmitter window fo ...

  • Nady Systems SW-1KU - page 5

    Quick User Controls Guide 8W-1KU Receiver: Rear V iew 5 13. RACK EARS Left and Right rack ears are built into the unit 13a. FAM-K2 ANTENNA EXTENSION CABLES (Optional) Attach coax cables with BNC connectors from back antenna jack to rack ear holes for front antenna mounting configuration 14. RF CONNECTORS Antenna jack A for RF T rue Diversity recep ...

  • Nady Systems SW-1KU - page 6

    6 Quick User Controls Guide HT -1KU Handheld T ransmitter 22. BA TTERY COVER Unscrew CW and pull down to insert two AA alkaline batteries 23. MIC BALL Windscreen/dust cover 24. LCD DISPLA Y For indication of GRP (00-09)/ CH (00-99), AUDIO INPUT LEVEL (0dB to -30dB), and BA TTERY status (5 bars and “BA TT .” ) See 30/31/32/33 in HT -1KU transmit ...

  • Nady Systems SW-1KU - page 7

     7 Quick User Controls Guide BT -1KU Bodypack T ransmitter (L T , L T/HM or GT) 37. INPUT JACK 3.5mm locking mini jack for connecting audio input cord from lapel mic (L T), Headmic™ (L T/HM), or instrument (GT) 38. POWER OFF/MUTE/ON SWITCH Slide power switch to ON or OFF to turn ON-OFF , set to MUTE to turn power on with audio muted 39. ANTENN ...

  • Nady Systems SW-1KU - page 8

    Installing Antennas Install antennas on back by connecting the two Antennas (21) included with your system onto the two RF Connectors (14/19) located on the back of the 8W-1KU receivers. The two antennas must be installed in order for the diversity circuit to work properly . The optimal positions of the antennas are 45° from the receiver and 90° ...

  • Nady Systems SW-1KU - page 9

    9 During manual programming, the selected function will flash for five seconds or press the Set button to confirm the selection and the display will return to the main menu. The AUTO-SCAN / ASC (IR Sync) Button (2) has two functions: • Long press (hold ~2 seconds) for AUTO- SCAN for finding a clear channel within the frequency band (with a ...

  • Nady Systems SW-1KU - page 10

    will flash for five seconds or press the Set button to confirm the selection and the display will return to the main menu. For detail how to IR Sync the TX, see IR Sync Programming in Programming sections of HT -1KU and BT -1KU transmitter sections. Adjusting the Squelch In normal operation, each 8W-1KU receiver’ s Mute Control (16) works inde ...

  • Nady Systems SW-1KU - page 11

    11 Y our 8W-1KU receiver is now operational and ready to use. Once you have completed the above steps, proceed to the following instructions for the HT -1KU Handheld or BT - 1KU Instrument transmitter . Note: Only one transmitter can be used with one receiver . It is not possible to use two transmitters on the same frequency and mix the output of t ...

  • Nady Systems SW-1KU - page 12

    HT -1KU Handheld Microphone T ransmitter Setting up the T ransmitter The HT -1KU requires two AA size batteries to operate. T o install the batteries onto the battery compartment, unscrew the Battery Compartment Cover (22) by turning counterclockwise until loose and slide down the cover , exposing the Battery Compartment (35). Insert two fresh AA b ...

  • Nady Systems SW-1KU - page 13

    13 IR Sync Programming: Use the wireless IR LED Receptor Sensor (34) to download pre-programmed channels from the receiver . Start programming by holding the IR Receptor Sensor/Window about 6” in front the receiver to be used. On the receiver , when short pressing the ASC IR Sync Button (5), while the main menu is displayed, the IR Infrared LED ( ...

  • Nady Systems SW-1KU - page 14

    14 decrease the RF power (reduced range). This is a useful feature as the “L” setting increases battery life and also optimizes the number of channels that can be used simultaneously in a given location. Use this setting for normal use not requiring maximum operating range. A range walk test before use will determine which setting is best for y ...

  • Nady Systems SW-1KU - page 15

    15 should stay lit as possible, indicating usable battery strength. As the batteries weaken, fewer of the level indicators stay lit until only one bar shows, which will then flash to warn that the batteries are now too low and should be replaced as soon as possible. T o preserve battery life, turn the transmitter off when not in use. T o turn the ...

  • Nady Systems SW-1KU - page 16

    16 at -10dB for L T/HM and 0dB for GT . These settings are optimal for most applications. For normal operation, the transmitter should have the same Group/Channel as displayed on the receiver . The default factory setting is Group 01 (Receiver 1) and 02 (Receiver 2), 03 (Receiver 3) and 04 (Receiver 4), Group 05 (Receiver 5) and 06 (Receiver 6), 07 ...

  • Nady Systems SW-1KU - page 17

    17 Specifications SYSTEM OVERALL SPECIFICA TIONS Operating Frequency Range (U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000- 819.975MHz Freq. Synthesized (1000 channels switchable) 25kHz/ step PLL System Frequency Stability <0.005% Frequency Response 30Hz-18kHz +/-3dB Dynamic Range 120dB Harmonic Distortion <0.5% Modulation FM (F3E) ...

  • Nady Systems SW-1KU - page 18

    18 LCD Display Group/ Channels/ Input V olume/ Battery Levels Antenna T ype External fixed Battery T ype 2 x AA alkaline batteries operation Battery Life 8-10 Hours typical Dimensions 2.5”W x 3.25”H x 1-13/16”D (6.35cm x 8.3cm x 1.82cm) Weight (w/o batteries) 3.8 oz (0.108 kg) Housing Construction Metal (25mW typical), LOW : +4dBm (2.5mW typ ...

  • Nady Systems SW-1KU - page 19

    19 Feedback A void acoustic feedback (howling or screeching) by taking care in selecting P A volume, transmitter location and speaker placement. Please also note the pickup pattern characteristics of the microphone selected. Unidirectional mics are more resistant to feedback. However , they pick up sound sources best that are directly in front of t ...

  • Nady Systems SW-1KU - page 20

    • For optimal operation with external antennas, low loss RF shielded cable should be used and the length of the cable should not exceed 10 ft. (3 m). • The receiver antennas should be kept away from any metal surfaces whenever possible as they can reflect away or shield the incoming RF signal. • If the receiver’ s volume control i ...

  • Nady Systems SW-1KU - page 21

    • When using the BT -1KU bodypack for instrument use: Scratchy noises can sometimes occur when an electric guitar with dirty pots or connections is used with a wireless system. Therefore, the supplied capacitor provides first-order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. Should y ...

  • Nady Systems SW-1KU - page 22

    Frequency Frequency Plan Band 1 (U.S.): 672.000-696.975MHz Band 2 (International): 795.000-819.975MHz 25KHz per step (1000 Channels) U.S. The 8U-1KU System Includes: User’ Manual (This manual) Main Receiver Unit T wo antennas 8 combination (HT/ L T/GT) transmitters Lav Mic for L T GT cable for GT AC/DC power adaptor Accessories Part Number Descri ...

  • Nady Systems SW-1KU - page 23

    One Y ear Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge ...

  • Nady Systems SW-1KU - page 24

    6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www .nady.com 07/11 ...

メーカー Nady Systems カテゴリー Turntable

Nady Systems SW-1KUのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SW-1KUの取扱説明書
- Nady Systemsの製品カード
- パンフレット
- またはNady Systems SW-1KUの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Nady Systems SW-1KUの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Nady Systems SW-1KUの取り付け説明書、サービスマニュアル、簡易説明書、またはNady Systems SW-1KUのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Nady Systems SW-1KUの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Nady Systems SW-1KUデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNady Systems SW-1KUを使用するのを助ける技術的文書のことです。説明書は通常、全てのNady Systems SW-1KUユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Nady Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Nady Systems SW-1KUの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNady Systems SW-1KUの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Nady Systems SW-1KUに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Nady Systems SW-1KUデバイスの基本機能を使うにあたってのヒント。 Nady Systems SW-1KUのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Nady Systems SW-1KUに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNady Systems SW-1KUのメーカー/サービスへの連絡先に関する情報。

Nady Systems SW-1KUについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもNady Systems SW-1KUの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNady Systems SW-1KUで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)