-
Sennheiser EM500 - page 1
EM 500 Instructions for use ...
-
Sennheiser EM500 - page 2
2 Thank you for choosing Sennheiser! W e have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read t hese instructions ca ...
-
Sennheiser EM500 - page 3
3 Contents The EM 500 G2 rack-mount receiver ........... .................................. ....................... 4 The channel bank system ................ .......................................... ..................... ................. 4 Safety instructions ........... ................................................................. ........ ...
-
Sennheiser EM500 - page 4
4 The EM 500 G2 rack-mount receiver The EM 500 G2 rack-mount receiver is part of the evolution wireless series ew 500 G2. With this series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. T ransmitters and receivers perm it wireless transmission with studio- quali ...
-
Sennheiser EM500 - page 5
5 Safety instructions Never open an electronic unit! If units are opened by customers in breach of this instruction, the warranty becomes null and void. Keep the unit away from central heatin g radiators and electric heaters. Never expose it to direct sunlight. Use the unit in dry rooms only. Use a damp cloth for cleaning the unit . Do not use any ...
-
Sennheiser EM500 - page 6
6 Areas of application The EM 500 G2 receiver can be combined with transmitters of the ew 500 G2 series (SK 500 G2 bodypack transmitter, SKM 500 G2 radiomicrophone or SKP 500 G2 plug-on transmitter). The transmitters are available in the same five UHF frequency ranges and are equipped with the same channel bank system with factory-preset frequencie ...
-
Sennheiser EM500 - page 7
7 Overview of operating controls Operating controls Graphic display panel Headphone output (PHONES), ¼” (6.3 mm) jack socket Headphone volume control (VOL) Graphic display, backlit / rocker button, backlit SET button, bac ...
-
Sennheiser EM500 - page 8
8 Indications and displays When used together with an ew 500 G2 transmitter, the receiver provides information on its operating states and those of the received transmitter (remote displays). Indications and displays of the receiver “PILOT” display The “PILOT” display appears on the display panel when the pilot tone evaluation is activa ...
-
Sennheiser EM500 - page 9
9 “MUTE” display The “MUTE” display appears on the display panel and the backlighting of the standard display switches from green to red. In addition, the text “MUTE” flashes in alternation with the standard display when y the RF signal of the received transmitter is too weak, y the received transmitter has been muted (with the pilo ...
-
Sennheiser EM500 - page 10
10 Preparing the receiver for use Mounting the receiver feet T o ensure that the receiver cannot slip on the surface on which it is placed, four self-adhesive sof t rubber feet are supplied. Ensure that the base of the receiver is clean and free from grease before mounting the rubber feet. Fix the rubber feet to the base of the receiver by ...
-
Sennheiser EM500 - page 11
11 Connecting the amplifier/mixing console The receiver’s audio outputs are available as an XLR-3M socket and a ¼” (6.3 mm) jack socket , allowing you to simultaneously connect two units (e.g. amplifier, mixing console). The adjusted audio output level is common for both sockets. Connect the amplifier/mixing console to the XLR-3M s ...
-
Sennheiser EM500 - page 12
12 T o mount two receivers into a rack: Place the two receivers side by side onto a flat surface, their bottom sides facing upwards. Align the connecting plate over the holes in the bottom sides of the receivers. Secure the connecting plate to the receivers using eight of the supplied recessed head screws (M 3x6). Hook the t ...
-
Sennheiser EM500 - page 13
13 Using the receiver Switching the receiver on/off The receiver can only be switched off when the standard display is shown on the display panel. When in the operating menu, briefly pressing the ON button will cancel your entry (ESC func tion) and return you to the standard display with the last stored settings. Press the ON button to swit ...
-
Sennheiser EM500 - page 14
14 The operating menu A special feature of the Sennheiser ew 500 G2 series is the similar, intuitive operation of transmitters and receivers. As a result, adjustments to the settings can be made quickly and “without looking” – even in stressful situations, for example on stage or during a live show or presentation. The buttons Overview of men ...
-
Sennheiser EM500 - page 15
15 W orking with the operating menu By way of example of the “ Tune ” menu, this section describes how to use the operating menu. Af ter switching the receiver on, the stan dard display is shown on the display panel. Getting into the operating menu Press the SET button to get from the standa rd display into the operating menu. The last sele ...
-
Sennheiser EM500 - page 16
16 Operating menu of the receiver SET SET SET SET SET SET SET SET SET SET SET SET Stored Menu Exit Bank 1 Channel 01 Menu Bank 3 Channel 01 T une 786.400MHz Exit AF Out +18 Bank 3 .01 B.CH 790.250 MHz Bank 1 .01 B.CH 786.300 MHz Stored Stored Channel 3. 08 B.CH 807.900 MHz Channel 3. 01 B.CH 790.250 MHz Menu Channel 08 T une 807.900MHz Scan Tu n e ...
-
Sennheiser EM500 - page 17
17 SET SET SET SET Name OCAL Soundcheck is started, current RF and AF levels are displayed / : Low , Mid, High SET : Stores the setting Menu Scan AF Out + 1 8 Squelch High Doing the soundcheck Menu AF Out –24 Squelch Low Display Scan Reset AF Out +18 Stored Squelch Low Squelch High / : Main, Frequency , Bank/Channel, Name, ...
-
Sennheiser EM500 - page 18
18 SET SET SET SET Current frequency response / : Flat , Low Cut, Low Cut/High Boost, High Boost SET : Stores the setting Changing the frequency response Menu Lock Off Equalizer Flat LCD Contr IIIIII..... STORED Equalizer Flat Equalizer High Boost Name Bank 1 / : On, Off SET : Stores the setting Menu Reset Pilot On Lock Off ...
-
Sennheiser EM500 - page 19
19 Adjustment tips for the operating menu Switching between channel banks Bank Via the “ Bank ” menu, you can switch between the receiver’s nine channel banks. The channel banks “1” to “8” have up to 20 switchable channels that are factory-preset to a receiving fr equency (see “The channel bank system” on page 4 ). The channel ban ...
-
Sennheiser EM500 - page 20
20 Displaying a list of all free channels Via the “ Channel list “ menu, you can display the number of free channels for all channel banks. Select the “ Scan ” menu. Select “ Channel list ” to display the last scan result. The illustrated list is an example list and may look different in other frequency ranges. The number of fre ...
-
Sennheiser EM500 - page 21
21 Select a channel bank with a sufficient number of free channels. Set all transmitter/receiver pairs in you multi-channel system to the free channels in this channel bank. Adjusting the audio output level AF Out Via the “ AF OUT ” menu, you can adjust the audio output level of the receiver. The level can be adjusted in eight step s. A ...
-
Sennheiser EM500 - page 22
22 Select the “ Soundcheck ” menu. The soundcheck is started immediately. With the transmitter, walk up and down the transmission area. Press the button on the receiver to terminate the soundcheck and to display the result of the soundcheck. The level displays “RF” and “AF” will indicate the lowest RF and the highest AF ...
-
Sennheiser EM500 - page 23
23 Entering a name Name Via the “ Name ” menu, you can enter a freely selectable name for the receiver. You can, for example, enter the name of the performer for whom the adjustments have been made. The name can be displayed on the standa rd display and can consist of up to ten characters such as: y letters (without pronounciation marks), y num ...
-
Sennheiser EM500 - page 24
24 Activating/deactivating the lock mode Lock Via the “ Lock ” menu, you can activate or deactivate the lock mode. The lock mode prevents that the receiver is accidentally programmed or switched off during operation. The lo ck mode icon on the display indicates that the lock mode is activated. T o deactivate the lock mode, first press the SET b ...
-
Sennheiser EM500 - page 25
25 T roubleshooting Error checklist If problems occur that are not listed in the above table or if the proble ms cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance. Problem Possible cause Possible solution No operation indication No mains connection Check the connections of the mains unit No RF s ...
-
Sennheiser EM500 - page 26
26 Recommendations and tips ... for optimum reception y T ransmission range depends to a larg e extent on location and can vary from about 10 m to about 150 m. There should be a “free line of sight” between transmitting and receiving antennas. y If, with the EM 500 G2 receiver, reception conditions are unfavourable, you should use two remote an ...
-
Sennheiser EM500 - page 27
27 Additional information HDX noise reduction Progress you can hear: The evolution wireless G2 series is equipped with HDX , the Sennheiser noise reduction system that reduces RF interference. It increases the signal-to- noise ratio in wireless audio transmission to more than 110 dB. HDX is a wideband compander system wh ich compresses the audio si ...
-
Sennheiser EM500 - page 28
28 Squelch Pilot tone squelch The ew 500 G2 transmitters adds a pilot tone to the audio signal. The receiver checks incoming audio signals to see if the pilot tone is present. In the absence of the pilot tone, the receiver’s audio output will remain muted, even if a strong RF signal is present. This prevents strong interfering sign als from causi ...
-
Sennheiser EM500 - page 29
29 Specifications RF characteristics Modulation wideband FM Frequency ranges 518–554, 626– 662, 740–776, 786–822, 830–866 MHz Receiving frequencies 8 channel banks with up to 20 factory-preset channels each 1 channel bank with up to 20 freely selectable channels (1440 frequencies, tunable in steps of 25 kHz) Switching bandwidth 36 MHz Nom ...
-
Sennheiser EM500 - page 30
30 Connector assignment Accessories AM 2 Antenna mount for mounting antennas to the front of the GA 2 A 1031-U UHF antenna, passive, omni-directional, can be mounted onto a stand AB 2-A UHF antenna booster, 10 dB gain powered via ASP 2/NT 1 518–554 MHz AB 2-B 626–662 MHz AB 2-C 740–776 MHz AB 2-D 786–822 MHz AB 2-E 830–866 MHz GZL 1019-A1 ...
-
Sennheiser EM500 - page 31
31 Manufacturer declarations W arranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. Excluded are accessory items, rech argeable or disposable batteries that are delivered with the product; due to their char acteristics these products have a shorter service life that is principally dependent on ...
-
Sennheiser EM500 - page 32
Sennheiser electronic GmbH & Co. KG 30900 W edemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ. 02/06 090624/A2 ...
Sennheiser EM500についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSennheiser EM500の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSennheiser EM500で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。