-
Aiphone IMU-100 - page 1
- 1 - 0505 A SECURITY WINDOW INTERCOM SYSTEM IMU-100, IAI-100, IAX-100, IME-100, ISE-100, IME-150 INSTALLATION & OPERATION MANUAL ...
-
Aiphone IMU-100 - page 2
- 2 - General Prohibitions General Precautions Prohibitions on Dismantling the Unit Prohibitions on Subjecting the Unit to Water W ARNING (Negligence could result in death or serious injur y to people) 1. Do not dismantle or alter the unit as it could result in a fire or electric shock. 2. Do not connect the unit with any non-specif ied power sourc ...
-
Aiphone IMU-100 - page 3
- 3 - 1-2 1-3 1-4 English P acka ge contents (acoustic interface kit IAI-100) 1. Dri ver unit DR-100 2. Screws 3. Rubber seal 4. Acoustic I/O tube AI-100 5. T emporary installation jig 6. T ube fixer FF-100 7. Counter installation scre w English P acka ge contents (acoustic tube IAX-100) 1. Acoustic tube IAX-100 2. T ube connector 3. Packing (semi- ...
-
Aiphone IMU-100 - page 4
- 4 - Operator units [1] Main unit MU-100 Position under the desk. Can be installed with the mounting bracket provided. [2] Operation unit OU-100 Position on the left or right of the window desk, in a user - friendly location. [3] Power supply adapter PS-2420UL/2420S Position between the AC outlet and main unit in a location where it can be easily ...
-
Aiphone IMU-100 - page 5
- 5 - English Acoustic interface [1] Center of acoustic I/O tube [2] Customer [3] Barrier glass [4] Upper acoustic tube (2) [5] Upper acoustic tube (1) [6] Acoustic I/O tube [7] Lo wer acoustic tube [8] Dri ver unit [9] T ube fixer 1. Estimate the av erage height of customers, taking into account gender and age dif ferences. Mark on the glass the h ...
-
Aiphone IMU-100 - page 6
- 6 - 4-1 English Main materials and tools 1. Main materials • Double-sided tape Select a tape suitable for your usage en vironment. Recommendation: 4910 (made by 3M) If you are using the acoustic tube system, cut a piece of tape approximately 50cm (20") longer than the total length of the tubes. If you are using the optional microphone, cut ...
-
Aiphone IMU-100 - page 7
- 7 - English Main unit Install the main unit under the counter or desk on the operator side. The cables from the other units will be connected at a later stage by temporarily removing the main unit. [1] Mounting bracket [2] Counter/desk [3] Switch [4] Front panel [5] Main unit [6] T erminal block [7] T ransmit output speaker cable [8] Recei ve mic ...
-
Aiphone IMU-100 - page 8
- 8 - 4-4 1. When the installation position is on the left as seen from the customer side, the acoustic I/O tube can be installed unchanged from its shipped configuration. When installing it on the right, while referring to the diagram, re verse the left/right direction of both slit plates of the acoustic I/O tube so that the direction of the sound ...
-
Aiphone IMU-100 - page 9
- 9 - 4-6 English Installation of the acoustic interface (driver unit) [1] Double-sided tape [2] Chassis [3] Set screws [4] Cable hole [5] Ceiling sash, etc. 1. The dri v er unit is connected to the top of the upper acoustic tube. Use the screws pro vided and double-sided tape to secure the chassis to the position where the glass meets the ceiling. ...
-
Aiphone IMU-100 - page 10
- 10 - 4-8 English Installation of the acoustic interface (acoustic I/O tube) [1] Fixing base of the acoustic I/O tube [2] Fixing base of the lower acoustic tube 1. Remov e the fixing base from the acoustic I/O tube main unit. 2. Attach double-sided tape to this fixing base. With the red label on the upper side, position the bottom of the fixing ba ...
-
Aiphone IMU-100 - page 11
- 11 - 4-10 English Acoustic interface wiring [1] Speaker cable from main unit [2] Microphone cable from main unit [3] T emporary installation jig [4] Acoustic I/O tube main unit [5] Microphone cord [6] Chassis [7] Cord groove 1. Pull the transmit output speaker cable and receiv e microphone input cable that come from the main unit on the operator ...
-
Aiphone IMU-100 - page 12
- 12 - 4-11 English [4] Connection ridge [5] Upper acoustic tube (2) [6] Upper acoustic tube (1) [7] Acoustic I/O tube [8] Lo wer acoustic tube [9] Microphone cord [10] Chassis [11] Rubber seal [12] Acoustic tube [13] Set scre w [14] Lead cable (dri ver unit) [15] Microphone cable [16] Speaker cable [17] Dri ver main unit 1. Position the red label ...
-
Aiphone IMU-100 - page 13
- 13 - 4-12 English Outer microphone/speaker [1] Racew ay [2] Optional microphone [3] Outer speaker 1. Attach the optional microphone with double-sided tape along the architectural sash. Clean the surface before attaching. Use a strong industrial double-sided tape that can attach aluminum and glass. • Examine the wiring route in adv ance and dete ...
-
Aiphone IMU-100 - page 14
- 14 - 5 WIRING DIA GRAM CON 1 12 [1] [4] [4] [4] P age Speaker OP 1 MU-100 2 OU-100 3 IME-100 ISE-100 4 DR-100 5 AI-100 IAX-100 6 PS-2420UL / 2420S - + +: Red SW: White - : Shield [3] [2] [3] [5] E: Shield +: Red - : White C: White H: Black 7 8 ...
-
Aiphone IMU-100 - page 15
- 15 - 5-1 English Wiring 1. Main unit MU-100 2. Operation unit OU-100 3. Gooseneck microphone IME-100 4. Dri ver unit DR-100 5. Acoustic I/O tube AI-100 and acoustic tube IAX-100 6. Po wer supply adapter PS-2420UL/2420S 7. Sensor ISE-100 8. Paging speak er (option) Suitable paging speakers ha ve 4 to 6 Ω impedance and rated input of 3W or more, ...
-
Aiphone IMU-100 - page 16
- 16 - English Names [1] POWER LED (green) [2] T ALK switch (orange) [3] V OL switch (orange) [4] P A GE switch (orange) [5] Gooseneck microphone [6] Receiv e speaker [7] Headset connectors [8] POWER switch [9] V O X sensiti vity knob [10] Transmit v olume knob [11] Paging volume knob [12] Receiv e volume knob [13] Noise canceling control knob [14] ...
-
Aiphone IMU-100 - page 17
- 17 - 7 SETTING UP [5] Adjust the sensiti vity of the VO X circuit. • W ith the equipment arranged as it would be during use, ha v e someone talk from the operator position. Adjust the V O X sensitivity knob by turning it clockwise so that it responds to the voice and the green LED illuminates. Adjust so that it illuminates when voice transmissi ...
-
Aiphone IMU-100 - page 18
- 18 - 8 OPERA TIONS English Operation [1] T urn on the POWER switch of the main unit. The green lamp illuminates to show that electricity is being supplied and the system can be used. [2] T urn on the T ALK switch of the operation unit. The orange lamp illuminates to show that communication is possible. • The voice from the customer side can be ...
-
Aiphone IMU-100 - page 19
- 19 - 9-1 9-2 9-5 English Specifications (main kit IMU-100) • Power source: DC 24V • Current consumption: 120 mA (standby) 780 mA (maximum) • Operating temperature: 0 ° C to 40 ° C • Communication: V oice-actuated communication T ransmit output: 3 W 4 Ω Recei ve output: 1.5 W 16 Ω • Headset: Ø 3.5 plug Impedance: 32 Ω Rated inpu ...
-
Aiphone IMU-100 - page 20
- 20 - Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty. Aiphone reser ...
Aiphone IMU-100についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAiphone IMU-100の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAiphone IMU-100で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。