-
Vermont Casting ANSI Z83.7-2000 - page 1
PROP ANE CONSTRUCTION HEA TER USER’S INSTRUCTION MANUAL RMC-F A40DLX (40,000 BTU/HR, FORCED - AIR) RMC-F A100DLX (70,000/100,000 BTU/HR, FORCED - AIR) RMC-F A150DLX (120,000/150,000 BTU/HR, FORCED - AIR) RMC-F A40A (40,000 BTU/HR, FORCED - AIR) RMC-F A50A (30,000/50,000 BTU/HR, FORCED - AIR) RMC-F A100A (70,000/100,000 BTU/HR, FORCED - AIR) RMC-F ...
-
Vermont Casting ANSI Z83.7-2000 - page 2
Page 1 T ABLE OF CONTENTS • Introduction & Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • General Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 • Product Features . . . . . . . . . . . . . . . . . . . . . . . ...
-
Vermont Casting ANSI Z83.7-2000 - page 3
Page 2 F W ARNING: Not for use with ductwork. SPECIFICA TIONS: Dyna-Glo Pr opane For ced Air Construction Heaters The heater is designed and approved for use as a construction heater under ANSI Z83.7., CSA2.14 It is hard to anticipate every use which may be made of this heater . CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HA VE QUESTIONS ABO ...
-
Vermont Casting ANSI Z83.7-2000 - page 4
Page 3 GENERAL SAFETY INSTRUCTIONS: Accidents are always tragic especially because so many of them could have been prevented with lit- tle care and judgment. There are some basic good practices, we hope you will follow for safe use of your heater . IMPOR T ANT SAFETY INFORMA TION: • Children should be carefully supervised, when they are in the ar ...
-
Vermont Casting ANSI Z83.7-2000 - page 5
Page 4 UNP ACKING: 1. Remove heater from carton. 2. Remove all protective packing applied to heater for shipment. 3. Retain cartons and packaging material until unit is operated and found in good condition. 4. Checker heater for any shipping damage. If heater shows any external or internal damage, promptly inform dealer/distributor where you purcha ...
-
Vermont Casting ANSI Z83.7-2000 - page 6
Page 5 INST ALLA TION T O THE PROP ANE GAS T ANK: IMPOR T ANT : Y ou must use a propane/LP gas supply cylinder that is compatible with the connec- tion device provided with the hose and regulator . 1. Provide propane/LP supply system (see Propane/LP Supply , page 6). 2. Connect fuel gas fitting hose/regulator assembly to propane LP tank(s). T urn f ...
-
Vermont Casting ANSI Z83.7-2000 - page 7
Page 6 Propane is safe to use when properly handled. Careless handling of the Propane gas tank could result in fire and/or an explosion. Therefore: • Always keep tank/cylinder securely fastened in an upright position. • A void tipping tank on its side when connected to a regulator since this may cause damage to diaphragm in regulator . • Hand ...
-
Vermont Casting ANSI Z83.7-2000 - page 8
Page 7 SHUTDOWN INSTRUCTIONS: Shutoff Heater: W ARNING: Motor and fan must be running before lighting, during operation and at shutdown, in order to prevent a flame-out condition which could result in personal injury or property damage. T urn gas valve knob clockwise to OFF position. T urn gas supply OFF by turning Propane tank valve clockwise to c ...
-
Vermont Casting ANSI Z83.7-2000 - page 9
Page 8 PROP ANE CONSTRUCTION HEA TER ILLUSTRA TED 40,000 BTU/Hr - 50,000 BTU/Hr ...
-
Vermont Casting ANSI Z83.7-2000 - page 10
Page 9 ITEM NO. DESCRIPTION QTY . P AR T NUMBER REMARK RMC-F A40DLX/ RMC-F A40A/RMC-F A50A 1 OUT SHELL 1 CFM40.01 2 HANDEL ASSEMBL Y 1 CFM40.10 3 SCREW 2 M5X10 4 MOTOR ASSEMBL Y 1 CFM40.09-02 4-1 FA N 1 CFM40.05-01 5 SCREW 4 ST3.9X8 6 SUPPOR T MOTOR 1 CFM40.06-02 7 SUPPOR T MOTOR SCREW 2 M6X15 8 MOTOR BRACKET 1 CFM40.06-01 9 MOTOR CONDENSER 1 CFM50 ...
-
Vermont Casting ANSI Z83.7-2000 - page 11
Page 10 PROP ANE CONSTRUCTION HEA TER ILLUSTRA TED 100,000 BTU/Hr - 150,000 BTU/Hr ...
-
Vermont Casting ANSI Z83.7-2000 - page 12
Page 1 1 ILLUSTRA TED P AR TS BREAKDOWN ITEM NO. DESCRIPTION QTY . P AR T NUMBER REMARK RMC-F A100DLX/ RMC-F A100A RMC-F A150DLX/ RMC-F A150A 1 OUT SHELL 1 1A0091A 1A0091B 2 HANDEL ASSEMBL Y 1 3A0197 3A0197 3 SCREW 1 PMF 4012Y PMF 4012Y 4 NUT 1 HOT04Y HOT04Y 5 MOTOR ASSEMBL Y 1 2A0169B 2A0169B 5-1 MOT OR F AN 1 3A0199B 3A0199B 6 MOTOR SUPPOR T 1 3A ...
-
Vermont Casting ANSI Z83.7-2000 - page 13
Page 12 WIRING DIAGRAMS: ...
-
Vermont Casting ANSI Z83.7-2000 - page 14
W ARRANTY : SER VICE AND LIMITED W ARRANTY CFM Home Products warrants this pr oduct to be free from defects in materials and components for two (2) years from the date of first pur chase, provided that the product has been properly installed, operated and maintained in accor dance with all applicable instructions. T o make a claim under warranty th ...
Vermont Casting ANSI Z83.7-2000についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもVermont Casting ANSI Z83.7-2000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがVermont Casting ANSI Z83.7-2000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。