ページに移動 of 58
Model PAV2000DTV MOBILE THEATER AM/FM, with DVD/CD Changer Controller and Motorized 7” Wide TFT LCD Display Owner’s and Installation Guide ...
1 INTRODUCTION Thank you for choosing the P A V2000DTV MOBILE THEA TER AM/FM, with DVD/CD Changer Controller and Motorized 7” Wide TFT LCD Display . This unit pro vides state of the art electronics and is constructed to provide years of reliable, trouble-free service. Please read all documentation prior to using this pr oduct. The documenta tion ...
2 CAUTIONS AND W ARNINGS CLASS 1 LASER PRODUCT The label above is atta ched to the chassis / case a nd notes that the component use s laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a wea ker class. There is no dan ger of hazardous radia tion outside the unit. The lightning flash with ar ...
3 IMPORT ANT SAFETY INSTRUCTIONS Safety Precautions 1. Caution Do not s pill or spray li quid of any ki nd on or in t he syst em (thi s may res ult in a f ire or electric shock). Insert the unit all the w ay in until it is fully locke d in place. Otherw ise, it may fall out of place when jolted. T o prevent a short circuit, never put or leave any m ...
4 edge. Always wipe the disc from the center out w ith a soft cleaning cloth when cleaning the disc. Re move th e disc from the DVD Playe r and store it in it s case af ter play ing. NOTE: Some software producers may inte ntionally fix some playback operations of discs. Since this DVD Player plays discs according to the disc contents the sof tware ...
5 T ABLE OF CONTENTS INTRODUCTION .................. ...................... ....................... ............................ ...................... .. ..... 1 CAUTIONS AND W ARNINGS .................... ............................ ....................... ........................... .. 2 IMPOR T ANT SAFETY INSTRUCTIONS................... ...... ...
6 Region Number ....... ....................... ............................ ....................... ........................... ...... ... 21 Disc Inser tion ........................ ........................... ....................... ....................... ................ ....... 21 CONTROLS AN D INDICA TORS ................. .................. ...
7 Power/ Mode ... ....................... .... ....................... ............................ ...................... ............. .4 6 Open/C lose............... ........................... ....................... ............................ ...................... .. ... 46 Eject ......................... ....................... ........... ...
8 P A V2000DTV SYSTEM SPECIFICA TIONS FM T uner Sp ecificati ons Frequency Range 87.50MHz to 108.0MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15dBf Alternate Channel Selectivity 70dB S tereo Separation (1kHz) 30dB AM T uner Specifications Frequency Range 530kHz to 1710 kHz Usable Sensitivity 25 dBuV TV T uner Specificati ons Recei ving C ...
9 LCD Monitor Specifications Screen Size 7-inch wide type 166mm with x 100mm Height Display method T ransmission type TN liquid crystal display Drive method TFT (thin -film transistor) active ma trix driving Pixels 336,960 (144 0 x 234) General Specifications Power so urce voltage 14.4VDC 10.8 to 15.6V allow able Ground Negative Current consumptio ...
10 INST ALLA TION OF THE P A V2000DTV SYSTEM Inst allation Kit(s) Conten t s 1. Main Control Unit Accessory Kit (P/N 170-0004) 1x DIN Slee ve (P/ N 108-3 812) 1x Fus e/Fil ter Harne ss (P/N 1 12- 3425) 1x Power/ S p eaker Har ness (P/ N 1 12 -3426) 1x Remo te Con trol (P/ N 136-3 712) 1x Video C ables (P/ N 1 12-34 27) 1x Ant enna Ext ensio n Cable ...
11 STRAP Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to t he desi red angl e. Installing the Holder After inse rting the holder into the d ashboard, select the appropriate ta bs according to the thickness of the dashboard material a nd bend them inwa rds to secure the holder in p lace. HOW T O DET ...
12 Installation of the RT Box Make sure that the unit is installed securely in place. If the unit is unstable, it may ma lfunction, for example, the source may skip. 1. Align the holes in the unit w ith the vehicle-mounting bracket and secure the unit with the accessory screws. 2. During installa tion, do not use any screw except for those provided ...
13 Connecting to Pow er & Multi Channel A V C ontrol Unit Sy stem Power Connection to Head Unit The illustration shown below depicts a typical power connection though the actual connection may vary depending on manufacturers (refer to the documentation supplied with the equipment to be connected). If the connection is not properly made, the uni ...
14 RT Box Connections 1. Connect the Y ellow wire to the Battery (+). 2. Connect the Red wire to ACC Power . 3. Connect the Black wire to Grou nd. WIRING DIAGRAM OF RT BOX 16PIN CONNECTOR 1. Connect the Y ellow wire (1,9) to the Battery (+). 2. Connect the Black wire (2) to Ground. 3. Connect the Red wire (3) to ACC Power . 4. Connect the White w i ...
15 8. Connect the Brown wire (8 ) to the Positive (+) of the Center S peaker . 9. Connect the Blue/Black w ire (10) to the Negative (-) o f the Navigation Soun d 10. Connect the Blue wire (1 1) to the Positive (+) of the Navigation Sound 11. Connect the Green/Black wire (1 2) to the Negative (-) of the L eft Rear S peaker . 12. Connect the Green wi ...
16 If a DVD or VCD Changer is u sed, connect the Video Outpu t of the changer to the Video Input of A V2. Do not connect the Audio Output of the changer to the Audio Input of A V2 this connection is done through the Din Cable connection . NOTE: • Make s ure th at power is OFF before m aking signal connec tion s. • Connect the He ad Unit MIN ET ...
17 • When installing a Subwoofer , us e an additional power amplifier equ ipped with a Subwoo fer analog line out. W ARNING The Digital Audio Output of this DVD player can only be connected to a compatible Do lby Digital and/or DTS decoder o r to an amplifier equipp ed with a digit al audio input. High volume digita l signals may damage other eq ...
18 NOTE: For a more powerful 5.1CH sound system , an a dditional power amplifier of 6CH or 5CH +1CH amplifier w ill need to be added to the system. ...
19 FRONT P ANEL MAINTENANCE Lens Fogging In certain weather conditions, dew or condensation may form on the lens in the p layer . In this condition, it may be po ssible that the d iscs will not play . If this happen s, re move the disc and wait for the condensation to evaporate. If the unit does not operate n ormally after a while, cons ult y our A ...
20 HANDLING CDs Do not touch th e recorded surface of the CD. CD-R an d CD-R W discs are easier to damage than a no rmal music CD . Do not apply tape or adhesive stickers etc. to the CD. T ape or adhesive stickers could come off and c ause d amage t o the un it. CD cleaning Clean d iscs from the center of the disc a nd move outw ard tow ards the ou ...
21 CD-R or CD-RW discs that have not been finalized cannot be played. (For the finalization process, refer to your CD-R/CD-RW writin g software, and your CD-R/CD-RW recorder ins truct ion ma nual.) CD sto r age Do not place CDs in direct sunlight (On the seat or dashboard et c.) or where the CDs will be subjected to high temperatures. CDs should be ...
22 CONTROLS AND INDICA TORS Front Panel (With the Display Close d) 1. V ol ume Up/Dow n buttons This button is used to increase/d ecrease the Audio V olume. 2. Tilt button Momentarily press and relea se this button to adjust the angle of the TFT LCD panel with 3 steps. When this button is pressed a nd held for 2 seconds, the TFT LCD panel moves 2 s ...
23 8. Menu/Setup • Menu: Th is button is used to display the System Menu . • Setup: Press and hold this button for 2 seconds to display the DVD MPE G Setup Menu. • NOTE: This button is used to switch between receiving bands for Radio or TV modes. 9. Mute This button is used mute all Audio outputs. Pressing the Mute button again will restore a ...
24 Front Panel (With the Display Open) 15. P .S/ BSM Same as it em numb er 10 on t he previ ous page. 16. Tr ack/TV CH Up/Down T rack l << and T rac k >> l same as item numb er 1 1 on the previous pa ge. Rear Panel 1. RGB Input for Audiovox Nav igation Connection 2. Minet for R T Box Connection 3. Optical Digit al Output for S pecial Do ...
25 REMOTE CONTROL Battery Inst allation 1. Plac e the R emote C ontrol butto n side do wn. 2. Slide the Battery Comp artment Cover open (Of f). 3. Insert tw o (2) AAA Batteries. NOTE: Be sure to observe the correct pola rity (+/-) as indicated in the battery compartme nt. 4. Replace the Battery Compar tment Cover CAUTION: INCORRECT BATTERY USEAGE M ...
26 Remote Control Functions The remote control should be pointed directly at the IR remote sensor (as shown above) in order for the he adunit to function corr ectly . Dist ance: The maximum distance that the remote control can be used is approx imately 16 fee t from the front of the remote sensor . Angle: The maximum angle that the remote control c ...
27 Remote Control Key Functions No Short Press (1 SE C) Long Press (2 SE C) Remark 1 Power ON/Mod e Power OFF 2 Mute 3 Open/Close 4 V olume Up/Down 5 AF-Alter nate Freque ncy T A -T raffic Announcement For use wi th RDS only 6 PTY -Program T ype REG-Region F or use with RDS only 7 T rack Up/Dow n DVD/CD/M P3/Radio/TV 8 Band OSD ON /OFF(Changer) 9 S ...
28 16 NT/P AL-NTSC or P AL DVD Mod e Only 17 Preset Scan BSM(Best S tation Mem o) 18 Play /Pause DVD/CD /MP3 19 S top Eject DVD/CD/M P3 20 Numeric Key Pad (Det ailed Below ) 1 1 Repeat Repeat in CD C hanger 2 2 A → B Repeat Random in CD Changer 3 3 Display Intro Scan in CD Changer 4 4 Title 5 5 S-Title-S ub T itle 6 6 Audio 7 7 Angle 8 8 Zoom 9 9 ...
29 SYSTEM OPERA TION T urning The System Power ON/OFF T o turn the system power ON, press and release the POWER button. The monitor wi ll be vertically positioned w hen pressing Open /Close button. Pressing and releasing the Open/Close button can also turn ON the system powe r . T o turn the system power OFF , press and hold the POWER button again ...
30 Picture Control 1. Press the SYSTEM MENU button on the remote control until the monitor displays followi ng picture and choose “PICTURE” on OSD. 2. Using the keys, place the cursor (Y ellow Bar) on Picture and press the ENTER key . 3. Use the keys and plac e the cur sor ( Y ell ow Bar ) on the f eatur e that needs adjustment ...
31 5. Press the ENTER key for 2 seconds to return to the previous menu. When there are no keys are pressed after 5 seconds or if the SYSTEM MENU button is pressed, the OSD menu w ill disappear . Audio Control 1. Press the SYSTEM MENU button on the remo te control until the monitor displays the figu re shown bel ow . 2. Use the keys and plac ...
32 5. Press the keys to a djust the level of the selected item a s shown in the figure below . 6. Press the SYSTEM MENU button for about 2 seconds in order to return to the previous menu. NOTE: When t here a re no ke ys are p res sed aft er 5 seco nds or if the S YSTE M MEN U button is pre ssed, the OSD menu w ill disappe ar . 7. The Bass/M ...
33 3. Use the keys and p lace the cursor (Y ellow Bar) on Co lor System and press the ENTE R key . The figu re shown bel ow will ap pear on t he dis play . 4. With the cursor placed on the Color System fea ture, press the ENTER key to switch between NTSC and P A L modes. When there are no keys are pressed after 5 seconds or if the SYSTEM ME ...
34 4. Us e t he keys and place the cursor (Y ellow Bar) on the Field fea ture and press the ENTER key as shown in the figu re below . 5. Each time the ENTER key is pressed the Field and S tandard selections will change for the selections detailed below: • U.S .A and M Æ CCIR1 and B/G Æ CCI R2 and BG Æ Ireland and IT’ Æ Australia and ...
35 4. Use the keys and p lace the cursor (Y ellow Bar) on Band and press the ENTER key as shown i n the f igure b elow . 5. Each time the ENTER key is pressed, the FM Band and FR EQ. S tep will change as detaile d below: • USA and 100 kHz Æ Europe an d 50K Hz Æ O.I.R.T and 50K Hz Æ Asia and 50K Hz Æ Austr alia and 10 0 kHz Æ S. Ameri ...
36 Initial Setting - (Adjust Sound Mix) 1. Press the SYSTEM MENU button and select the Initial Setting feature. 2. Us e the keys and place the cursor (Y ellow Bar) on Sound Mix and press the ENTER key . 3. Us e the keys and place the cursor (Y ellow Bar) on NA VIGA TION and press the ENTER key as shown in the figure below . 4. Ea ch ...
37 7. Each time the ENTER key is pressed , the Handsfree feature will change as detailed below: • OFF Æ R Æ L Æ L+R 8. Press the EN TER key for 2 seconds to re turn to th e previo us screen. 9. Press the ENTER key for 2 seconds to retur n to the previous screen. Press the ENTER key for 2 seco nds to turn the MENU of f. Press the SYST EM MENU b ...
38 6. Us e t he keys and place the cursor (Y ellow Bar) on ANGLE and press the ENTER key as shown in the figure be low . 7. Each time the ENTER key is pressed the ANGLE feature will ch ange as detaile d below: • 0 deg Æ 180 deg 8. Press the ENTER key for 2 seconds to retur n to the previous screen. Press the ENTE R key for 2 se conds ag ...
39 button is presse d, the OSD menu will disappear . When no key is presse d for 5seconds, the menu w ill be disappeared. Or pre ss SYSTEM MENU button again to turn MENU of f directly . OVERVIEW OF THE RDS FUNCTION AF (Alternative Frequencies) / REG (Regional): After turn ing the RDS feature on, AF can be set to b ecome “ON” or “OFF” using ...
40 T A(Traffic Announcement) / TP (T raffic Program) TP mo de will a utomatically switch b etween “ON” and “OFF” depend ing upon the broadcast. In order to access the T A mode, press the AF button on the remote contro l for 2 seconds and the T A mo de will sw itch betwe en “ON” and “OFF”. When the T A mode is “ON” and a traf f i ...
41 T uning (TV -Auto Search) 1. After adjusting the TV system within the In itial Setting feature, press the P .S/BSM button on the front p anel of the unit to store TV chan nels. The indication “Searching” will flash on the screen during the TV Auto Sea rch feature and the channel s will be memo rized automa tical ly . 2. Wh en the Auto-S earc ...
42 DVD Player Operation Changing DVD System Setting Press the MPEG SET U P button on the re mote control, and five categories w ill be displaye d on the screen: Language, Video, Audio, More Audio, and Parental. Use the directional arrows and to select between the displayed features. Use the ENTER button to sele ct the desired feat ure. Lang ...
43 Audio Within the Audio menu, the following features ca n be ad just ed: Do lby Di gital , DTS , MP3/ WMA, and CD/VCD. Use the directional arrows and to choose the desi red sele ction. Use the directional arrow s and to between digital and analog out. Use the ENTER button to ad just the s ettings . The A nalog output can be s et f ...
44 Speaker Lev el Press the ENTER button to cycle through the S peaker Level selections for 5.1 CH speakers as follows: Center , Left Surr , Right Surr , Subwoofer , Front Left, a nd Front Right. Each time the ENTER button is pressed, each mode will change. T o select a mode, press the direction arrow and the display will show the level at 0 dB ...
45 Parental The Parental Menu prohibits the play of specified DVDs that are unsuitable for children. Press the ENTER button to acce ss the Parental Menu. There are two featur es within the pare ntal menu: Password an d Rating. The Password featur e is initially unlocked. To set a password, enter a 4-digit code and pr ess the ENTER button . The Rati ...
46 Disc Playb ack Operation Disc Insertion Insert a disc into the center of the insertion slot with the label side facing up. The disc will automatically play after lo ading. NOTE: Do not in sert foreign objects into the disc insertion slot. If the mechanism does no t accept the disc, either there already may be a disc in the unit or the unit may n ...
47 • If an A udio CD is insert ed, th e monitor will displa y "CD" on t he scre en. When all chap ters on the disc have been played, th e unit will automa tically stop playing. Using the Remote Control T o select a function that is printed o n a button o n the remote control, p ress the desired button for 1 second. T o select a function ...
48 Display T o access the Display Feature of t he unit, press the DISPLA Y button (the number 3 button on the remote c ontrol) for 2 second s. The first time the but ton is pre ssed , the trac k elapsed t ime and time to end of the disc is displayed on the screen. Pressing the button a second time displays all of the information as shown in the fig ...
49 Direction Buttons-Menu/Titl e Navigation and Movement Press the direction buttons ( , , , ) to navigate through various on-screen selections. Press the ENTER button to select a desired feature. After Playback When the unit is not in use , eject the disc and tur n OFF the power by pressing the POWER butt on for 2 seco nds. NOTES: ...
50 Zoom The ZOOM feature allows the user to “ZOOM IN” and en larges the picture on the screen. Press the ZOOM button (the numb er 8 button on the remote control) for 2 seconds to access th e zoom feature. Repeatedly press the ZOOM button to cycle between OFF , 1X, 2X, and 3X enlargement. While in Zoom mode, the directional buttons enable a Pan ...
51 MP3 Disc Track Up & Down ( I<< , >>I) Use the T rack Up and Dow n buttons or the directional buttons ( and ) to skip to the ne xt or previous song. T o see the next page o n the screen, use the directiona l buttons ( and ). Numerical Key Pad MP3 files can be selected via the nu merical ke yp ad. Photo CD Press the ...
52 AM/FM Radio Operation Band (AM/FM) Repe atedl y press the BA ND butt on on th e remot e contr ol to ch ange be twee n the FM an d AM bands as follo ws: • FM1 / FM2 / FM3 / AM1 / A M2 Each band can store 30 stations. OSD ON/OFF • When the changer is connected, the OSD for changer in formation will be shown in A V2 mode. Press t he BAN D butto ...
53 TV Operation Seek (Manual) UP/DOWN The Seek Up/Down feature allows the user to manually tune to a TV channel. Press and hold the SEEK button for 2 second s to access the Seek Mode. T o use this button for Manual T uning, press this button for 2 seconds and then tune the frequency by channel sp acing. If a button is not pressed for 5 seconds, the ...
54 TROUBLESHOOTING Inadequate operating temperatures. The tempe rature inside the vehicl e may be 0 or less. A llo w the vehicle to war m up. The headl ight of the vehicle is lit. The display is made darkened at nigh t to prev ent glare. The color of the display is light or a shade of color is not good. The color is not adjusted adequately . Ch ...
55 When the TV tuner is connected the image get s unclear . Bad reception A r adio wa ve may not reach su fficient ly due to obstruction by mountains or buildings. Check it again at a place where a radi o wave can be received properly . The TV tu ner has a g host image Bad receiving condition A radio wave may not reach sufficien tly due to obstruct ...
56 12 MONTH LIMITED W ARRANTY Appli es to Audiov ox V ideo P r oducts A U D I O V O X E L E C T R O N I C S C O R P . (the Company) warrants to the original retail purchaser of this product that should this product or any par t thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of ...
57 © 2004 AEC, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7148B WWW .audiovox.c om For Customer Ser vice Vis i t O u r Web s it e A t Product Infor mation, Photos , F AQ’s Owner ’s Manuals ...
Audiovox PAV2000DTVのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- PAV2000DTVの取扱説明書
- Audiovoxの製品カード
- パンフレット
- またはAudiovox PAV2000DTVの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Audiovox PAV2000DTVの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Audiovox PAV2000DTVの取り付け説明書、サービスマニュアル、簡易説明書、またはAudiovox PAV2000DTVのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Audiovox PAV2000DTVの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Audiovox PAV2000DTVデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAudiovox PAV2000DTVを使用するのを助ける技術的文書のことです。説明書は通常、全てのAudiovox PAV2000DTVユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Audiovoxの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Audiovox PAV2000DTVの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAudiovox PAV2000DTVの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Audiovox PAV2000DTVに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Audiovox PAV2000DTVデバイスの基本機能を使うにあたってのヒント。 Audiovox PAV2000DTVのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Audiovox PAV2000DTVに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAudiovox PAV2000DTVのメーカー/サービスへの連絡先に関する情報。
Audiovox PAV2000DTVについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAudiovox PAV2000DTVの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAudiovox PAV2000DTVで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。