AEG 84602 Gの取扱説明書

26ページ 0.16 mb
ダウンロード

ページに移動 of 26

Summary
  • AEG 84602 G - page 1

    AUS ERFAHRUNG GUT 8460 2 G - 85600 G - 85600 1 G Gas hob Table de cuisson K ochmulde Gaskookplaat Piano di cottur a Oper ating Instructions Notice d’utilisation Gebr auchsanweisung Gebruiksaanwijzing Istruzioni per l’uso ...

  • AEG 84602 G - page 2

    2 Important Safety Information Y ou MUST r ead these warnings car efully befor e installing or u sing the hob. If you need ass i stance, contact our Customer Car e Department on 0 1635 5727 00 In stallation ● This hob must be installed by qualified per sonnel, according to the manufactur er’s instructions and to the r elevant British Standards. ...

  • AEG 84602 G - page 3

    3 ● When in use a gas cooking hob will pr oduce heat and moisture in the r oom in which it has been installed. Ensure ther e is a continuous air supply , keeping air vents in good condition or installing a cooker hood with a venting hose. ● When using the hob for a long period time, the ventilation should be improved, by opening a window or inc ...

  • AEG 84602 G - page 4

    4 Content s Important Safety Information .................................................................... 2 In structions for the U ser .............................................................................. 6 Description of the Hob ........................................................................................... 6 Operation .. ...

  • AEG 84602 G - page 5

    5 This appliance is manufactured accor ding to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current edition. Guide to U se the instruction s The following symbols will be found in the text to guide you thr oughout the Instructions: Safety Instructions Step by step instructions for an oper ation Hints a ...

  • AEG 84602 G - page 6

    6 1. Hob Top 2. Rapid Burner 3. Semi-rapid Burner s 4. Auxiliary Burner 5. Control knob for back right burner (semi-r apid) 6. Control knob for back left burner (semi-r apid) 7. Control knob for fr ont left burner (rapid) 8. Control knob for fr ont right burner (auxiliary) Description of the Hob INST ALLATION Any gas installation must be carried ou ...

  • AEG 84602 G - page 7

    7 HOB BURNERS To light a burner , turn the relevant contr ol knob anticlockwise to the maximum position, then push it down to ignite the burner . Upon, ignition, adjust the flame as r equired. If the burner does not ignite, turn the control knob to zer o, and try again. When switching on the mains, after installation or a power cut, it is quite nor ...

  • AEG 84602 G - page 8

    8 Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob fr om the electricity supply . The hob is best cleaned whilst it is still warm, as spillage can be r emoved more easily than if it is left to cool. The Hob T op Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing ...

  • AEG 84602 G - page 9

    9 Something Not W orking? If the hob is not working corr ectly , please carry out the following checks befor e contacting your local AEG Service For ce Centre. SYMPT OM ■ There is no spark when lighting the gas ■ The gas ring burns unevenly SOLUTION ◆ Check that the unit is plugged in and the electrical supply is switched on ◆ Check that th ...

  • AEG 84602 G - page 10

    10 Service and Spar e P arts When you contact the Service Centr e, they will need the following information: 1. Y our name, address and post code. 2. Y our telephone number 3. Clear and concise details of the fault 4. The model and the serial number (see rating label on the back of this instruction booklet) 5. Date of pur chase If you r equire spar ...

  • AEG 84602 G - page 11

    11 Guar antee Conditions AEG offer the following guarantee to the fir st purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handled over to the fir st retail purchaser , which must be verified by purchase invoice or similar documentation. The guarantee does not cover commer cial use. 2. The guarant ...

  • AEG 84602 G - page 12

    12 OVERALL DIMENSIONS Width: 580 mm. Depth: 5 1 0 mm. Height: 88 mm. W eight: 8 Kg. CUT OUT DIMENSIONS Width: 550 mm. Depth: 47 0 mm. Thickness: 30 mm. SUPPL Y CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230-240V 50Hz supply , 3 cor e flexible cable with non rewir eable plug fitted with a 3 amp cartridge fuse. IGNI ...

  • AEG 84602 G - page 13

    13 BURNER RAPID SEMI-RAPID AUXILIARY (large) (medium) (small) POSITION MAX MIN MAX MIN MAX MIN NOMINAL THERMAL POWER kW 2.9 0.65 1.9 0.45 1.0 0.33 NOMINAL FLOW RATE m 3 /h 0.276 0.062 0.181 0.043 0.095 0.031 NOZZLE REFERENCE 119 Adjust. 96 Adjust. 70 Adjust. 1/100 mm NOMINAL THERMAL POWER kW 2.7 0.65 1.9 0.45 1.0 0.33 NOMINAL FLOW RATE g/h 195 46.8 ...

  • AEG 84602 G - page 14

    14 Important s afety requir ements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Curr ent Edition). Detailed recommendations ar e contained in the following British Standards Codes Of Pr actice: B.S. 6 172/ B.S. 5440, P ar . 2 and B.S. 6891 Curr ent ...

  • AEG 84602 G - page 15

    15 650 mm 420 mm 420 mm 100 mm 50 mm 50 mm 55 mm 600 mm 700 mm 420 mm 100 mm 420 mm 50 mm 55 mm 50 mm CLEARANCES REQUIRED WHEN FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE CLEARANCES REQUIRED WHEN FITTING THE GAS HOB WITH A COOKER HOOD ABOVE FO 0813 FO 0812 In stallation IMPORT ANT This hob must be installed by qualified personnel to the relevan ...

  • AEG 84602 G - page 16

    16 A) End of shaft with nut B) W asher C) Elbow FO 0814 FO 0264 On the end of the shaft, which includes the GJ 1/2" thr eaded elbow , adjustment is fixed so that the washer is fitted between the components as shown in the diagram. Scr ew the parts together without using excessive force. It is important to install the elbow correctly , with the ...

  • AEG 84602 G - page 17

    17 550 470 580 510 55 min. FO 2272 Cut Out Size The dimensions of the cut-out ar e given in the diagram. Building In Building over a cupboar d or dr awer If the hob is to be installed above a cupboard or dr awer it will be necessary to fit a heat resistant boar d below the base of the hob on the underside of the work surface. It is also recommended ...

  • AEG 84602 G - page 18

    18 ON/OFF SWITCH FLEX OUTLET ON/OFF SWITCH FLEX OUTLET FO 0763 FO 0764 1 2 Building over a kitchen unit with door Proper arr angements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The r ecommended solution is shown in diagr am 3. The panel fitted und ...

  • AEG 84602 G - page 19

    19 Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob . It is essential that no gaps ar e left in this seal in order to pr event spillage near the hob seeping into the cabinet below . 1) Remove the pan supports, the burners caps and cr owns and turn the ho ...

  • AEG 84602 G - page 20

    20 Electrical connection s Any electrical work requir ed to install this hob should be carried out by a qualified electrician or competent per son, in accordance with the current r egulations. THIS HOB MUST BE EARTHED. The manufactur er declines any liability should these safety measures not be observed. This hob is designed to be connected to a 23 ...

  • AEG 84602 G - page 21

    21 P ermanent Connection In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the r equired load in compliance with the current electric r egulations. The switch must not br e ...

  • AEG 84602 G - page 22

    22 Fault Finding Preliminary Electrical Sy stems Check START Isolate appliance and carry out: A: Earth Continuity check. Has inlet fuse blown? Carry out: C: Polarity check. Electricity supply should now be satisfactory. Carry out: D: Resistance to Earth check. Inlet wiring faulty. Rectify any fault. Isolate appliance and carry out: B: Insulation ch ...

  • AEG 84602 G - page 23

    23 A. EARTH CONTINUITY CHECK Appliance must be electrically disconnected - meter set on Ω (Ohms) x 1 scale and adjust zero if necessary . — Test leads fr om any appliance earth point to earth pin on plug. Resistance should be less than 0.1 Ω (Ohm), check all earth wir es for continuity and all contacts clean and tight. B . INSULATION CHECK Ap ...

  • AEG 84602 G - page 24

    24 Check gas supply at burner Ignition Sy stem / Gas Ignition YES Check plug top fuse and replace if necessary Check polarity and earth continuity of supply point Check earth continuity of appliance Ignitor does not spark Check fitting of burners Check position of the electrode Check by pass simmer adjusted Light burner manually Check continuity fr ...

  • AEG 84602 G - page 25

    25 Commi ssioning When the hob has been fully installed it will be necessary to check the minimum flame setting. T o do this, follow the procedur e below . 1) Turn the gas tap to the MAX position and ignite. 2) Set the gas tap to the MIN flame position then turn the contr ol knob fr om MIN to MAX several times. If the flame is unstable or is exting ...

  • AEG 84602 G - page 26

    26 Conver sion fr om Natural Gas to LPG It is important to note that this model is designed for use with natur al gas but can be converted for use with butane or pr opane gas providing the corr ect injectors ar e fitted. The gas r ate is adjusted to suit. Method 1) Ensur e that the gas taps are in the 'OFF' position 2) Isolate the hob fr ...

メーカー AEG カテゴリー Cooktop

AEG 84602 Gのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 84602 Gの取扱説明書
- AEGの製品カード
- パンフレット
- またはAEG 84602 Gの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、AEG 84602 Gの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、AEG 84602 Gの取り付け説明書、サービスマニュアル、簡易説明書、またはAEG 84602 Gのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、AEG 84602 Gの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

AEG 84602 Gデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAEG 84602 Gを使用するのを助ける技術的文書のことです。説明書は通常、全てのAEG 84602 Gユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

AEGの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. AEG 84602 Gの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAEG 84602 Gの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。AEG 84602 Gに関してこのドキュメントで見つけることができる全てのヒントの目次
3. AEG 84602 Gデバイスの基本機能を使うにあたってのヒント。 AEG 84602 Gのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。AEG 84602 Gに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAEG 84602 Gのメーカー/サービスへの連絡先に関する情報。

AEG 84602 Gについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAEG 84602 Gの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAEG 84602 Gで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)