JVC KD-S7250の取扱説明書

23ページ 4.19 mb
ダウンロード

ページに移動 of 23

Summary
  • JVC KD-S7250 - page 1

    ENGLISH INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTRUCTIONS GET0058-001A [J] ESP AÑOL FRANÇAIS For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. For installation and connections, refer to the separate manu ...

  • JVC KD-S7250 - page 2

    2 ENGLISH How to reset your unit Press and hold both the SEL (Select) and (Standby/On/A TT) b uttons at the same time for se ver al seconds. This will reset the built-in microcomputer . NOTES: Y our preset adjustments — such as preset channels or sound adjustments — will also be erased. If a CD is in the unit, it will eject when you reset the u ...

  • JVC KD-S7250 - page 3

    3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BEFORE USE * For safety .... • Do not raise the volume level too much, as this will block outside sounds, making driving danger ous. ? ...

  • JVC KD-S7250 - page 4

    4 ENGLISH e y t r i u w q 5 6 4 3 1 2 7 8 9 p o a g d ; s f h j k l LOCA TION OF THE BUTTONS Control panel Display window 1 (standby/on/attenuator) b utton 2 Control dial 3 LOUD (loudness) button 4 DISP (display) b utton 5 Display windo w 6 Loading slot 7 CD button 8 FM button 9 0 (eject) button p 4 / ¢ buttons • Also functions as SSM buttons wh ...

  • JVC KD-S7250 - page 5

    5 ENGLISH 1 2 3 4 6 7 5 RM-RK31 3 • Functions as the PRESET button while listening to the radio. Each time you press the b utton, the preset station number increases, and the selected station is tuned into . • Does not function as the DISC – b utton. 4 Functions the same as the control dial on the main unit. NOTE: These buttons cannot be used ...

  • JVC KD-S7250 - page 6

    6 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the battery When the controllable range or eff ...

  • JVC KD-S7250 - page 7

    7 ENGLISH BASIC OPERA TIONS 4 Adjust the sound as you want (see pages 14 – 16). T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume level will drop in a moment. T o resume the previous v olume level, press the button briefly again. • If you turn the control dia ...

  • JVC KD-S7250 - page 8

    8 ENGLISH RADIO BASIC OPERA TIONS T o stop searching bef ore a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). Note: This r eceiver has three FM bands (FM1, FM2, FM3). Y ou can use any one of them to listen to an FM br oadcast. 2 Press and hold ...

  • JVC KD-S7250 - page 9

    9 ENGLISH 3 T une into a station you want while “ M ” is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing. When an FM stereo broadcast is hard to receive: Press MO RND (monaural/random) while listening to an FM ste ...

  • JVC KD-S7250 - page 10

    10 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1). • Each time you press the button, the FM band changes as follows: 2 T u ...

  • JVC KD-S7250 - page 11

    11 ENGLISH Playing a CD 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playbac k automatically . Note: • When a CD is inserted upside down, the CD automatically ejects. CD OPERA TIONS T o stop play and eject the CD Press 0 . CD play stops and the CD automatically ejects from the loading slot. If you change the sou ...

  • JVC KD-S7250 - page 12

    12 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) Y ou can pla y back all trac ks on the CD at random. Each time you press MO RND (monaural/random) while playing a CD, CD random play mode turns on and off alternately . When the random mode is turned on, the RND indicator lights up on the display and a track randoml ...

  • JVC KD-S7250 - page 13

    13 ENGLISH Prohibiting CD ejection Y ou can prohibit CD ejection and can loc k a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. T o cancel the prohibition and unloc k the CD, press and hold CD and 0 again for more than 2 sec ...

  • JVC KD-S7250 - page 14

    14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS Adjust the bass. – 06 (min.) (Bass) | +06 (max.) TRE Adjust the treble. – 06 (min.) (T reble) | ...

  • JVC KD-S7250 - page 15

    15 ENGLISH • When “ SCM LINK ” is set to “ LINK ON ” , the selected sound mode can be stored in memory for the current source and the eff ect applies only to the current source. • When “ SCM LINK ” is set to “ LINK OFF ” , the selected sound mode effect applies to an y source. Recalling the sound modes When “SCM LINK” is set ...

  • JVC KD-S7250 - page 16

    16 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes (BEA T , SOFT , POP) to your preference and store your own adjustments in memor y . • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Call up the sound mode you want to adjust. • See page ...

  • JVC KD-S7250 - page 17

    17 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL ” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display . 2 Adjust the hour . 3 Set the minute. 1 Select “CLOCK M”. 2 Adjust the minute. 4 Pres ...

  • JVC KD-S7250 - page 18

    18 ENGLISH Selecting the level display Y ou can select the le vel displa y according to your preference. When shipped from the factory , “A UDIO 2” is selected. A UDIO 1: Lev el meter illuminates from bottom to top. A UDIO 2: Alter nates lev el meter (mov es from bottom to top) and illumination display . OFF: Erases the audio le vel indicator . ...

  • JVC KD-S7250 - page 19

    19 ENGLISH Detaching the control panel Y ou can detach the control panel when lea ving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . How to detach the control panel Before detaching the control panel, be sure to turn off the power . 1 Unloc ...

  • JVC KD-S7250 - page 20

    20 ENGLISH MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the following marks. Y ou can also pla y back y our original CD-Rs (Recordable) and CD-R Ws (Rewritable) on this receiver . This unit is not compatible with MP3. How to handle CDs When removing a CD from its case, press do wn the center holder of the c ...

  • JVC KD-S7250 - page 21

    21 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • CD cannot be played back. • CD sound is sometimes interrupted. • Sound cannot be heard from the speakers. • SSM (Strong-station Sequential Memory) automatic preset does not work. • Static noi ...

  • JVC KD-S7250 - page 22

    22 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: F ront: 45 W per channel Rear : 45 W per channel Continuous Power Output (RMS): F ront: 17 W per channel into 4 Ω , 40 to 20 000 Hz at no more than 0.8% total harmonic distor tion. Rear : 17 W per channel into 4 Ω , 40 to 20 000 Hz at no more than 0.8% total harmonic disto ...

  • JVC KD-S7250 - page 23

    1001KKSFLEJEIN EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvcser vice .com W e can help y ou! http://www . j v cmobil e. c om Visit us on -line for T ec hnical Suppor t & C usto mer Satisfa ...

メーカー JVC カテゴリー CD Player

JVC KD-S7250のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- KD-S7250の取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC KD-S7250の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC KD-S7250の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC KD-S7250の取り付け説明書、サービスマニュアル、簡易説明書、またはJVC KD-S7250のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC KD-S7250の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC KD-S7250デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC KD-S7250を使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC KD-S7250ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC KD-S7250の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC KD-S7250の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC KD-S7250に関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC KD-S7250デバイスの基本機能を使うにあたってのヒント。 JVC KD-S7250のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC KD-S7250に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC KD-S7250のメーカー/サービスへの連絡先に関する情報。

JVC KD-S7250についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC KD-S7250の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC KD-S7250で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)