ページに移動 of 52
NW -E95/E99 Operating Instructions Portable IC Audio Player Network W alkman “W ALKMAN” is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. 2-581-015- 61 (1) © 2004 Sony Corporation ...
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent f ...
3 Declaration of Conformity Trade Name: SONY Model No.: NW-E95 NW-E99 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 USA Telephone Number: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfere ...
4 Notice for users On the supplied software • Copyright laws prohibit reproducing the software or the manual accompanying it in whole or in part, or renting the software without the permission of the copyright holder. • In no event will SONY be liable for any financial damage, or loss of profits, including claims made by third parties, arising ...
5 T able of Contents Overvie w ................................................... 6 What you can do with your Network W alkman ........................................... 6 Other features ........................................ 7 Step 1: Checking the package contents ..... 8 Step 2: Inserting the battery ....................... 9 Locating control ...
6 Overview What you can do with your Network Walkman First, you need to install the “SonicStage” software into your computer (MP3 File Manager software is pre-installed in your Network Walkman). You can easily transfer digital audio files from your computer to the built-in flash memory and carry it anywhere to enjoy. 1 Store digital audio files ...
7 Other features • Compact size, light weight, skip-proof operation, high portability. • The pre-installed MP3 File Manager software enables you to transfer MP3 format audio files to your Network Walkman and listen to them with your Network Walkman as MP3 format files. • Continuous playback time with a battery NW-E95/E99: Approximately 70* 1 ...
8 Please check the accessories in the package. NW-E95/E99: • Network Walkman (1) • Headphones (1) • Dedicated USB cable (1) • Carrying pouch (1)* • Neck strap (1)* • Extension headphone cord (1) • CD-ROM for the SonicStage software (1) • Operating Instructions (1) • SonicStage Operating Instructions (1) * NW-E99 only Step 1: Check ...
9 Step 2: Inserting the batter y Insert the size AAA (LR03) alkaline battery with correct polarity. Be sure to insert it from the E side as illustrated. OPEN OPEN If the battery compartment lid is accidentally detached, attach it as illustrated. Battery duration * ATRAC3 format: Approximately 70 hours ATRAC3plus format: Approximately 60 hours MP3 f ...
10 Locating contr ols For details about each part, refer to the pages in parentheses. Rear side Front side G r o u p M o d e 1 2 3 4 5 6 7 8 9 0 qz OPEN qs qd 1 Strap hole for attaching the strap 2 REPEAT/SOUND button (page 18 to 20, 23) 3 MENU button (page 16 to 22, 24, 26 to 34) You can switch to the Time display by pressing the MENU button for a ...
11 1 Text/graphic information display (page 17) Displays track number, track name, current date and time (page 22 to 28), MESSAGE (page 13, 39) and menu. Press the MENU button to switch the display mode. For details, refer to “Changing the display mode” on page 22. 2 Repeat mode indication (page 18) The current repeat mode is displayed. 3 AVLS ...
12 Basic Operations T ransferring audio files from the computer to your Network W alkman Note Before connecting your Network Walkman to the computer for the first time, be sure to install the “SonicStage” software from the supplied CD-ROM in your computer. Even if the SonicStage software is already installed, you need to install the SonicStage ...
13 Basic Operations Notes • The ACCESS lamp blinks while your Network Walkman accesses the computer. • Do not disconnect the USB cable when the ACCESS lamp is blinking. The data being transferred may be destroyed. • Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your Network Walkman to th ...
14 Listening to music with your Network W alkman Please insert the battery before use (see page 9). Note When using Network Walkman, be sure do disconnect it from the computer. 1 Connect the headphones. G o u p M o d e to i jack 1 Press the Nx button. z Tip If your Network Walkman is not operated for 5 seconds while in stop mode, the display automa ...
15 Basic Operations What is the Group function? The Group function enables you to select favorite music conveniently on your Network Walkman. You can transfer to audio files or play songs by album or artist using the Group function. Tr a c k1 Group1 Tr a c k2 Tr a c k3 Tr a c k1 Tr a c k2 Tr a c k3 Tr a c k1 Tr a c k2 Tr a c k3 Group2 Group3 Tr a c ...
16 To Skip to the beginning of the next track/ group* 1 Skip to the beginning of the current track/ group* 1 Fast-forward* 2 Fast-rewind* 2 * 1 Rotating and holding of the Shuttle switch during stop mode allows you to skip to the beginning of the next (current and previous) track/group continuously. * 2 Fast-forward and fast-rewind speed become fas ...
Advanced Operations 17 Repeat mode There are three types of repeat mode: Track Repeat, A-B Repeat and Sentence Repeat. • Track Repeat (TRK Rep) This mode plays back tracks repeatedly in the following five ways. Track Repeat mode All Repeat* 1 Single Repeat Group Repeat Group Shuffle Repeat All Groups Shuffle Repeat* 2 • A-B Repeat (A-B Rep) Thi ...
18 Repeat mode Playing the tracks repeatedly (Track Repeat) The Track Repeat mode is changed by pressing the REPEAT/SOUND button. You can check the current Track Repeat mode with the icon of the display. Select the Track Repeat mode (TRK Rep) first (page 17). Then, press the REPEAT/SOUND button repeatedly to select the repeat mode you want. Each pr ...
Advanced Operations 19 Playing a specified section repeatedly (A-B Repeat) While playing a track, you can set the start point (A) and end point (B) for a section you wish to play repeatedly. 1 Select the A-B Repeat mode (A-B Rep) (page 17). 2 Press the Nx button to start playback. 3 Press the REPEAT/SOUND button to set the start point (A) while pla ...
20 Playing specified sentences repeatedly (Sentence Repeat) This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. This is useful for language-learning material which has no background music. z Tip The default repeat counts setting is 2 times for one sentence. But you can change the ...
Advanced Operations 21 Setting the repeat counts You can set the repeat counts (1-9) of one sentence for the Sentence Repeat mode. 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch to select “REPEAT MODE >” and press the Nx button to confirm. 3 Rotate the Shuttle switch to select “SENTENCE R ...
22 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch to select “DISPLAY >” and press the Nx button to confirm. The selected display mode blinks. Lap T ime 3 Rotate the Shuttle switch to select a desired display mode and press the Nx button to confirm. The display switches to the selected displ ...
Advanced Operations 23 Adjusting treble and bass (Digital sound pr eset) You can adjust the treble and bass. You can preset two settings, which can be selected during playback. Selecting the Sound quality Default settings Sound SOUND 1 SOUND 2 SOUND OFF quality (S1) (S2) (NORMAL SOUND) Bass +1 +3 ±0 Treble ±0 ±0 ±0 Press and hold the REPEAT/ SO ...
24 3 Set the tone for “SOUND 1.” 1 Rotate the Shuttle switch to select “SOUND 1 >” and press the Nx button to confirm. 2 “BASS:+1” appears, rotate the Shuttle switch to adjust the emphasis level of bass sound and press the Nx button to confirm. 3 “TREBLE: 0” appears, rotate the Shuttle switch to adjust the emphasis level of trebl ...
Advanced Operations 25 Storing non-audio data You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer. The built-in flash memory is displayed in Windows Explorer as an external drive (for example: as the D drive). Notes • If you store a lot of non-audio data into the built- in flash memory, th ...
26 B Adjusting the settings of your Network Walkman Changing the setting to “OFF” The time setting of your Network Walkman does not change even when your Network Walkman is connected to a computer. 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch to select “PC CLK:” and press the Nx button t ...
Adjusting the settings of your Network Walkman 27 3 Rotate the Shuttle switch to adjust the “year” setting and press the Nx button to confirm. The “month” digit blinks. 2004y 1m 1d 4 As you did in step 3, adjust the settings for “month” and “date.” After rotating the Shuttle switch to adjust the “date” setting and pressing the N ...
28 Limiting the volume (A VLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch to select “AVLS” and pr ...
Adjusting the settings of your Network Walkman 29 4 Press the MENU button. To change the setting to “OFF” Select “OFF” in step 3. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Setting the volume using the pr eset volume function There are two modes to adjust the volume level. Manual mode: Press the VOL ...
30 To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Note If AVLS (page 28) is set, the actual volume may be lower than the settings. Releasing AVLS returns the volume to the preset level. Switching to the manual mode 1 Press the MENU button. The menu screen is displayed. 2 Rotate the Shuttle switch to select “V ...
Adjusting the settings of your Network Walkman 31 Tu r ning off the beep sound (BEEP) You can turn off the beep sounds of your Network Walkman. 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch to select “BEEP:” and press the Nx button to confirm. “ON” blinks. BEEP:ON 3 Rotate the Shuttle swi ...
32 3 Rotate the Shuttle switch to select “ON” and press the Nx button to confirm. LIGHT:ON 4 Press the MENU button. The display returns to the normal screen. To change the setting to “OFF” Select “OFF” in step 3. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Changing the backlight setting You can s ...
Other functions 33 Regr ouping songs (REGROUP) — NW-E95 only The songs group function may be disabled* when a song has been deleted from or added the built-in flash memory by operating the computer in which the SonicStage software is not installed (page 12). In such a case, you may enable the group function by regrouping audio file. When you need ...
34 Formatting memory (FORMA T) You can use your Network Walkman to format the built-in flash memory. If memory is formatted, all data previously stored in the memory will be erased. Be sure to verify the data stored in the memory prior to formatting. 1 Press the MENU button. The menu screen is displayed. REPEATMODE > 2 Rotate the Shuttle switch ...
Other Information 35 Pr ecautions On installation • Never use your Network Walkman where it will be subjected to extremes of light, temperature, moisture or vibration. • Never leave the Network Walkman exposed to high temperature, such as in a car parked in the sun or under direct sunlight. On the headphones Road Safety Do not use headphones wh ...
36 Tr oubleshooting If you experience any of the following difficulties while using your Network Walkman, use this troubleshooting guide to help you to remedy the problem prior to consult a Sony dealer. Should any problem persist, consult your nearest Sony dealer. For trouble concerning operations while connected to your computer, please refer to ? ...
Other Information 37 On the display window Symptom The backlight is not turned on. “ s ” is displayed for a title. On the connection with the computer or supplied software Symptom The software cannot be installed. “CONNECT” is not displayed when connecting to the computer with the dedicated USB cable. Your Network Walkman is not recognized ...
38 Troubleshooting Symptom Song cannot be transferred to your Network Walkman. The number of audio files that can be transferred to is limited. (Available recording time is short.) The operation of the Network Walkman becomes unstable while it is connected to the computer. “Failed to authenticate Device/Media” is displayed on the computer scree ...
Other Information 39 Messages Follow the instructions below if an error message appears in the display. Message ACCESS AVLS CANNOT PLAY CONNECT ERROR EXPIRED FILE ERROR HOLD LOW BATT MEMORY FULL* Meaning Accessing the built-in flash memory. The volume level exceeds the rated value while the AVLS is enabled. • Your Network Walkman cannot play cert ...
40 To delete abnormal data from the built-in flash memory If “CANNOT PLAY,” “EXPIRED,” “FILE ERROR,” or “MG ERROR” is displayed, there is a problem with all or part of the data stored in the built-in flash memory. Please follow the procedures below to erase data you cannot play. 1 Connect your Network Walkman to the computer, and st ...
Other Information 41 Signal-to-noise ratio (S/N) 80 dB or more (excluding ATRAC3 66 kbps) Dynamic range 85 dB or more (excluding ATRAC3 66 kbps) Operating temperature 5˚C to 35˚C (67˚F to 95˚F) Power source Size AAA (LR03) alkaline battery Battery life (continuous playback) ATRAC3 format: Approximately 70 hours (Playback at 105 kbps) ATRAC3plus ...
42 Glossary MagicGate Copyright protection technology that consists of authentication and encryption technology. Authentication ensures that protected content is transferred only between compliant devices and media, and that protected content is recorded and transferred in an encrypted format to prevent unauthorized copying or playback. Note is ter ...
Other Information 43 MP3 MP3, which stands for MPEG-1 Audio Layer-3, is a format standard for music file compression. It was codified by the Motion Picture Experts Group, a working group of ISO (International Organization for Standardization). It compresses audio CD data to approximately one tenth its original size. Because the MP3 encoding algorit ...
44 Display (Menu mode) FORMAT > (Formatting memory) REGROUP > (Regrouping data) (NW-E95 only) [RETURN] Purposes You can format the built-in flash memory. (page 34) You can restore the group function. (page 33) You can switch to the normal mode by selecting [RETURN] and pressing the Nx button. Menu list Press the MENU button to display the men ...
45 MP3 File Manager software operation What you can do with the MP3 File Manager You can transfer MP3 audio files easily, using the MP3 File Manager software, to your Network Walkman in the same format (MP3), unlike the SonicStage software, which converts MP3 audio files into ATRAC3plus format. The MP3 File Manager software is pre- installed on the ...
46 T ransferring MP3 audio files fr om the computer to your Network W alkman 1 Connect your Network Walkman to your computer. Connect the small connector of the supplied dedicated USB cable into the USB jack on the Network Walkman, then the large connector to a USB port on your computer. “CONNECT” appears in the display. 2 Click [My Computer]-[ ...
47 MP3 File Manager software operation Notes • Do not disconnect the USB cable or remove your Network Walkman when the MP3 File Manager software is running. If you do, operation is not guaranteed. • The ACCESS lamp blinks while your Network Walkman accesses the computer. • Do not disconnect the USB cable or remove your Network Walkman when th ...
48 Display of MP3 File Manager 1 Album list Double click this to show the included track list. Double click again to hide the track list. 2 Track list 3 Click this button to erase selected albums or tracks. 4 Click this button to erase all the albums or tracks. 5 Clicks this button to finish the MP3 File Manager. 6 A selected line turns blue You ca ...
49 MP3 File Manager software operation Erasing audio file You can erase a song stored in the built-in flash memory by track or album using MP3 File Manager. The display is for the NW-E99. 1 Open the MP3 File Manager. 2 Select a flash memory from the transfer destination list. (NW-E99 only) 3 Select the title you want to erase. 4 Click the button in ...
50 A A-B Repeat 19 ACCESS lamp 12, 46 Accessories 8 ATRAC3 42 ATRAC3plus 42 Audio CDs 6 AVLS (Limiting the volume) 11, 28 B Backlight 32 Battery 9 BEEP (Beep sound) 31 Bit rate 42 C CD (Audio CDs) 6 CD-ROM 8, 12 Clock 26, 27 Computer 6, 12, 45 D DATE-TIME 27 Display 11, 18, 39 Display mode 22 Download 6 E EMD service 6, 13 Explorer (Windows Explore ...
51 O OpenMG 42 P PC CLK 26 Playback 14 R Regroup (NW-E95 only) 33 Remaining battery indication 9 Repeat 17 Repeat count 21 Reset 36 RETURN 44 S Sentence Repeat 20 Serial Number 8 Shuffle Repeat 17 Skip to the beginning of a track 16 SonicStage 12 Sound preset (Digital sound preset) 23 T Time Setting 26, 27 Title 22 Track Repeat 18 Transferring 6, 1 ...
Printed in China This warranty is valid only in the United States. ...
Sony NW-E99のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NW-E99の取扱説明書
- Sonyの製品カード
- パンフレット
- またはSony NW-E99の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sony NW-E99の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Sony NW-E99の取り付け説明書、サービスマニュアル、簡易説明書、またはSony NW-E99のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sony NW-E99の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Sony NW-E99デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSony NW-E99を使用するのを助ける技術的文書のことです。説明書は通常、全てのSony NW-E99ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Sonyの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Sony NW-E99の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSony NW-E99の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sony NW-E99に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sony NW-E99デバイスの基本機能を使うにあたってのヒント。 Sony NW-E99のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sony NW-E99に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSony NW-E99のメーカー/サービスへの連絡先に関する情報。
Sony NW-E99についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSony NW-E99の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSony NW-E99で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。