Emerson 3350の取扱説明書

24ページ 2.08 mb
ダウンロード

ページに移動 of 24

Summary
  • Emerson 3350 - page 1

    Model 3700 T ransmitter (MVD) or Model 3350 Peripheral Inst allation Instructions for Field-Mount Quick Reference Guide P/N 20001008, Rev . B August 2005 For technical support, phone the su pport center nearest you: • In the U.S.A., phone 1-800-522-MASS (1-800-522-6277) • In Canada and Latin America, phone (303) 527-5200 • In Asia, phone (65) ...

  • Emerson 3350 - page 2

    1 BEFORE YOU BEGIN This quick reference guide e xplains basic installation guidelines for installing the Micro Motion ® Model 3350/370 0 MVD applications platform. For information on I.S. applications , refer to Micro Motion approv al documentation. For complete instru ctions about conf ig uration, maintenance, and service, refer to the instructio ...

  • Emerson 3350 - page 3

    2 European installations This Micro Motion product complies with all applicable European directiv es when properly installe d in accordance with th e instructions in this quick reference guide. Refer to the EC declaration of conformity for directiv es that apply to this product. The EC declaration of conformity , with all applicable European direct ...

  • Emerson 3350 - page 4

    3 STEP 1. Choosing a location Choose a location for the tr ansmitt er based on the requirements described below . Environmental requ irements Install the Model 3350/3700 ac cording to specif ied limits: • Ambient temperature: –4 to +140 °F (–20 to +60 °C ) Dimensions See Figures 2, 3, and 4 fo r Model 3350/3700 dimensions. Visibility of tag ...

  • Emerson 3350 - page 5

    4 Figure 2. Dimensions – face view Figure 3. Dimensions – top view 4 x 5/16-inch (9 mm) diameter Display co ver can be rotated as needed Mounting brac ket can be rotated as needed 2 13/16 (71) 6 (152) 4 (102) 9 3/16 (234) 3 5/8 (92) 12 (305) 11 (279) inches (mm) Approvals tag 5 1/16-inch (12 9 mm) clearance f or removal of circuit boards 11 5/1 ...

  • Emerson 3350 - page 6

    5 Figure 4. Dimensions – cond uit openings view Cable lengths Maximum cable length from the sens or to the Model 3700 transmitter depends on the installatio n type and cable type: • 4-wire remote transmitter: see Figu re 5, then refer to T able 1 for maximum length of the 4-wire cable. • Remote core processor with remote transmitter: see Figu ...

  • Emerson 3350 - page 7

    6 Figure 5. 4-wire remote transmitter Figure 6. Remote core proce ssor with remote transmitter T able 1. Maximum cable lengths Cable type Wire gauge Maximum length Micro Motion 9-wire Not applicable 60 feet (20 meters) Micro Motion 4-wire Not applicable 1000 feet (300 meters) User-supplied 4-wire • P ower wires (VDC) 22 A WG ( 0,35 mm 2 ) 300 fee ...

  • Emerson 3350 - page 8

    7 STEP 2. Preparing con duit openings for A TEX Zone 1 If the Model 3350/3700 carries an A TEX Zone 1 approv al: 1. Remov e thread protectors from conduit openings (see Figure 7). 2. Install factory-supplied c able glands o r user-supplied EExe cable entry de vices in conduit op enings that are in use. 3. Install EEx e plugs in conduit openings tha ...

  • Emerson 3350 - page 9

    8 STEP 4. Mounting the applications platform For flat-surf ace mounting, see Figure 8. For po le mounting, see Figure 9. Figure 8. Mounting to a flat s urface Figure 9. Mounting to a pole 4 x 5/16-inch or M8 bolt (user-supplied) • Mount al l four bolts to the same surface. • If mounting surf ace is not flat, use washers to shim the brac ket. ? ...

  • Emerson 3350 - page 10

    9 STEP 5. Mounting the core processor This step is required only for re mote core processor with remote transmitter installations (see Figure 6). If you ha ve a 4-wire remote installation, go to Step 6. Figure 10 sho ws the remote core pro cessor and mounting bracket. Using the mounting bracket, mount the core processor in a location compatible wit ...

  • Emerson 3350 - page 11

    10 Figure 11. Wiring terminals T able 2. Input/output wiring terminals T erminal number Designation 1 – 2 + Primar y 4–20 mA output / HART 3 – 4 + Secondary 4–20 mA ou tput 5 – 6 + F requency input 5 – 7 + Discrete input 1 5 – 8 + Discrete input 2 11 (B line) 12 (A line) RS-485 output 20 – 16 + Discrete output 3 20 – 17 + Discrete ...

  • Emerson 3350 - page 12

    11 Figure 12. Wiring terminal labels STEP 7. Connecting the Mod el 3700 to the sensor If you are installing the Model 3350 appli cations pe ripheral, this step is not required. Go to Step 8. T o connect the Model 37 00 transmitter to a Micro Motion sensor , follow the instructions in this section. Model 3350/3700 wit h AC power supply T erminal 9: ...

  • Emerson 3350 - page 13

    12 Installation options The Model 3700 can be wired to the sensor in either of the following confi gurations: • 4-wire remote transmitter (requires a 4-wire cable; see Figure 5 and W iring instructions for 4-wire r emote installations ) • Remote core processor with remo te transmitter (requires both a 4-wire and a 9 -wire cable; see Figure 6 an ...

  • Emerson 3350 - page 14

    13 Figure 13. 4 -wire cable to Model 3700 – standard core processor Figure 14. 4 -wire cable to Model 3700 – enhanced core processor Core processor terminals 4-wire cable Model 3700 terminal s blue terminal bloc k (see Figure 11) VDC+ (Red) VDC– (Black) RS-485B (Green) RS-485A (White) Maximum cable length: see T able 1 User-supplied or fa cto ...

  • Emerson 3350 - page 15

    14 Wiring instructions for remote core processor with remote transmitter There are two phases to this procedure: • W iring the remote core pr ocessor to the transmitter • W iring the sensor to the remote core processor T o wire the remote core processor to the tr ansmitter: 1. Use one o f the followin g me thods to shield the wiring: • If you ...

  • Emerson 3350 - page 16

    15 4. For connection at the core processo r housing , prepare shielded c able as follo ws (for armored cable, omit steps d, e, f, g): a. Strip 4 1/2 inches (114 mm ) of cable jacket. b . Remo ve the clear wrap that is inside the cable jacket, and remo ve the f iller material between the wires. c. Remov e the foil shield that is ar ound the insulate ...

  • Emerson 3350 - page 17

    16 g. Position gland clamping insert so the interior end is flush with the heat shrink. h. Fold the cl oth shield or braid and drain wires over the clamping insert and approximately 1/8 in ch (3 mm) past the O-ring. i. Install the gland body into th e core processor housing conduit opening. 5. Insert the wires thro ugh the gland body and assemble t ...

  • Emerson 3350 - page 18

    17 7. Reinstall and tighten the core processor lid. 8. T o connect the cable to the transm itter , connect the four wires from the core processor to the appropriate terminals on the transmitter . See T able 3 and Figure 13. No bare wires should remain e xposed. Do not ground the shield or drain wire(s) at the transmitter . T o wire the sensor to th ...

  • Emerson 3350 - page 19

    18 1. Refer to Micro Motion’ s 9-W ir e Flowmeter Cable Pr epar ation and Installation Guide for instructions on cable shielding and preparatio n: • At the sensor end, follo w the in structions for your cable type. • At the core processor end, follo w the instructions for your cable type with an MVD transmitter . 2. T o connect the wires, ref ...

  • Emerson 3350 - page 20

    19 If using shielded or armored cable: a. Ground the shield dra in wires (the black wire) only on the co re processor end, by connecting it to the ground screw inside the lo wer conduit ring. Do not ground to the core pro cessor’ s mounting scre w . Do not ground th e cable at the sensor junction box. b . Ground the cable braid on both ends, b y ...

  • Emerson 3350 - page 21

    20 Connect the Model 33 50/3700 to a po wer supply as follo ws: 1. Use 18 to 12 A WG (0,75 to 4,0 mm 2 ) wire. 2. Using a flat-head screwdri ver , loos en the captiv e screws that secure the display cov er to the housing. 3. Ground the transmitter as follo ws: • Connect the ground wire to the green screw (p ower supp ly ground; see Figure 11). ? ...

  • Emerson 3350 - page 22

    21 ...

  • Emerson 3350 - page 23

    22 ...

  • Emerson 3350 - page 24

    Micro Motion Europe Emerson Process Management V eenendaal The Netherlands T +31 (0) 318 495 670 F +31 (0) 318 495 689 Micro Motion United Kingdom Emerson Process Management Limited Horsfield W a y Bredbury Industrial Estate S tockport SK6 2SU U.K. T 0800 966 180 F 0800 966 181 Micro Motion Jap an Emerson Process Management Shinagawa NF Bldg. 5F 1- ...

メーカー Emerson カテゴリー Satellite Radio

Emerson 3350のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 3350の取扱説明書
- Emersonの製品カード
- パンフレット
- またはEmerson 3350の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Emerson 3350の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Emerson 3350の取り付け説明書、サービスマニュアル、簡易説明書、またはEmerson 3350のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Emerson 3350の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Emerson 3350デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがEmerson 3350を使用するのを助ける技術的文書のことです。説明書は通常、全てのEmerson 3350ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Emersonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Emerson 3350の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははEmerson 3350の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Emerson 3350に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Emerson 3350デバイスの基本機能を使うにあたってのヒント。 Emerson 3350のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Emerson 3350に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるEmerson 3350のメーカー/サービスへの連絡先に関する情報。

Emerson 3350についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもEmerson 3350の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEmerson 3350で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)