-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 1
G5 CABLE MOTION ™ GYM SYSTEM USER GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS H P ART # 8289201 REV . A VERSION: LFG5-003 DA TE: 08-16-07 ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 2
2 T ABLE OF CONTENTS Safety S tatement . . . . . . . . . . . . . . . .2 Assembly Instructions . . . . . . . . . . . . . .7 Gym Dimensions. . . . . . . . . . . . . . . . .3 General Maintenance . . . . . . . . . . . . . .19 Components List . . . . . . . . . . . . . . . . .4 W arranty S tatement/Notes . . . . . . . . . .20 Hardware . . . . . . . . . . ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 3
3 GYM DIMENSIONS Resistance Ratio: 1:2 Machine Weight: 500 pounds ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 4
4 COMPONENTS LIST ITEM NO. QTY . P ART NO. DESCRIPTION 1 1 8188301 FRONT UPRIGHT ASSEMBL Y 2 1 8210501 FOOT PLA TE WITH MA TS ASSEMBL Y 4 1 8349801 RIGHT UPRIGHT ASSEMBL Y 5 1 8349901 LEFT UPRIGHT ASSEMBL Y 6 2 8264701 GUIDE ROD ASSEMBL Y 8 1 8317801 FRONT SHROUD ASSEMBL Y 9 1 8317701 MOUNTING BRACKET 1 1 2 8264801 FLOA TING PULLEYS ASSEMBL Y 12 1 ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 5
5 COMPONENTS LIST HARDW ARE ITEM NO. QTY . P ART NO. DESCRIPTION 57 14 3102514 3/8” W ASHER 58 4 3256203 M10 X 30MM SCREW 59 8 325621 1 M10 X 70MM SCREW 60 4 3241313 M12 X 80MM SCREW 61 8 3102507 1/2” W ASHER 62 4 3242005 M12 HEX NYLOCK NUT 63 2 3240502 M10 X 50 HEX TENSION SCREW 64 2 7634401 GUIDEROD RET AINER 65 4 3236501 M4 X 0.7MM ZINC PHIL ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 6
6 HARDW ARE: M10 HEX TENSION SCREW (#63) M10 NYLOCK NUT (#71) 3/8” W ASHER (#57) 1/2” W ASHER (#61) M10 X 30MM SCREW (#58) M6 x 60MM SCREW (#69) 1/4” W ASHER (#70) RET AINER RING (#67) M10 X 70MM SCREW (#59) M12 X 80MM SCREW (#60) M10 X 20MM SCREW (#66) M12 NYLOCK NUT (#62) #10 x 3/4” BRONZE PHILLIPS P AN HEAD SCREW (#68) #6 x 3/8” BLACK ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 7
7 STEP 1: Slide the RIGHT SUPPORT LEG (55) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT (4). Loosely secure the RIGHT SUPPORT LEG (55) and RIGHT UPRIGHT (4) to the FRONT UPRIGHT (1) using two M12 x 80mm SCREWS (60), four 1/2” W ASHERS (61), and two M12 HEX NYLOCK NUTS (62) as shown. With the UPPER PULLEY ASSEMBL Y (25) oriented as show ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 8
8 STEP 2: LOOSEL Y attach the FOOTPLA TE (2) to the RIGHT SUPPORT LEG (55) and LEFT SUPPOR T LEG (56) using four M10 x 70mm SCREWS (59) and four FLA T 3/8” W ASHERS (57). ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 9
9 STEP 3: Positon two WEIGHT ST ACK CUSHIONS (23) and GUIDE RODS (22) at the GUIDE ROD BRACKET (B) on the bot- tom of the FRONT UPRIGHT (1). NOTE: MAKE SURE THA T THE PLUGGED ENDS OF THE GUIDE RODS (22) ARE F ACING UP . CAREFULL Y slide one of the WEIGHT PLA TES (46) over the top of the GUIDE RODS (22) and slowly lower the WEIGHT PLA TE on ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 10
10 STEP 4: Remove one QUICK CONNECT from the end of one UPPER (LONG) CABLE (43). Insert the end (where the QUICK CONNECT was removed) of the UPPER (LONG) CABLE (43) through the UPPER PULLEY (25) and follow routing illustration to the FLOA TING PULLEY ASSEMBL Y (1 1) through to the HEAD PLA TE PULLEY ASSEMBL Y (10). Continue to the other sid ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 11
11 STEP 5: Dissemble the QUICK CONNECT (37) by removing the two M5 HEX SCREWS (H) from the QUICK CONNECT COUPLER (D). Carefuly remove the COMPRESSION SPRING (G), the QUICK CONNECT SLEEVE (F) and the QUICK CONNECT HOUSING (E). Slide the QUICK CONNECT HOUSING (E), COMPRESSION SPRING (G), and QUICK CONNECT SLEEVE (F) onto the cable as shown. I ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 12
12 STEP 6: Mount the RIGHT BOTTOM PLA TE (13) and the LEFT BOTTOM PLA TE (30) to the FRONT UPRIGHT (1) using two 10-32 x 3/4” PHILLIPS P AN HEAD SCREWS (68) for each plate. Place the FRONT SHROUD (8) around the FRONT UPRIGHT (1). Align the bottom mounting holes of the FRONT SHROUD (8) with the remaining mounting holes on the RIGHT BOT ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 13
13 STEP 7: Remove one QUICK CONNECT from the end of one LOWER (SHORT) CABLE (44). Insert the end (where the QUICK CONNECT was removed) of the the LOWER (SHORT) CABLE (44) through the LOWER RIGHT PULLEY (27) and through the access hole in the FOOTPLA TE (2). Continue routing the cable as shown ending at the RIGHT MID PULLEY ASSEMBL Y (I). Re ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 14
14 STEP 8: Attach the BACK THIGH HOLD CLAMP (50) to the the MAIN UPRIGHT (1) by using two M6 x 60mm SCREWS (69) and two 1/4” W ASHERS (70) from the back of the MAIN UPRIGHT (1). Attach the ROLLER P AD ASSEMBL Y (7) to the MAIN UPRIGHT (1) by using four M10 x 70mm SCREWS (59), eight 3/8” W ASHERS (57), and four M10 HEX NYLOCK NUTS (71) t ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 15
15 STEP 9: Attach the TOP FRONT COVER (17) to the TOP BACK COVER (16) using eight M4 ZINC PHILLIPS P AN HEAD SCREWS (72). DO NOT OVERTIGHTEN SCREWS INT O PLASTIC P ARTS. ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 16
16 STEP 10: Insert the ball end of one GUIDE CABLE (42) through the eye hook on one FLOA TING PULLEY ASSEMBL Y (1 1). Insert and hook the ball end of the cable into the SLOTTED BUSHING (L) located at the bottom of the frame located directly below the FLOA TING PULLEY ASSEMBL Y (1 1). Screw the threaded end of the cable into the FRONT UPRIGH ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 17
17 STEP 1 1: Assemble the MOUNTING BRACKET (9) to the top of the FRONT UPRIGHT (1) using two M10 x 20mm SCREWS (66) and two 3/8” W ASHERS (57). T ighten screws SECUREL Y . Attach the SIDE TOP LEFT COVER (28), the SIDE T OP RIGHT COVER (29) and the MAIN T OP COVER (15) to the MOUNTING BRACKET (9) using four M4 x 0.7 ZINC PHILLIPS P AN HEAD ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 18
18 STEP 12: Referencing step 5, at the UPPER SWIVEL PULLEYS (25) push back on the QUICK CONNECT SLEEVE (F) at the end of each cable and attach the SHOR TER HANDLES (38). Repeat the process for attaching the ADJUST ABLE HANDLES (40) to the lower cable ends and the MEDIUM HAN- DLES (39) to the middle cable ends. NOTE: THE HANDLE CONFIGURA TIO ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 19
19 MAINTENANCE Please note: * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your Life Fitness cus- tomer service representative at (800) 351-3737. * Inspect equipment daily . T ighten all loose connections and replace worn part s immediately . Failure to do so ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 20
20 LIMITED W ARRANTY Life Fitness® G5 Cable Motion™ Gym System Life Fitness extends the following LIMITED W ARRANTY to the original owner (proof of purchase required, keep your receipt with this manual) of the Life Fitness product. The W arranty terms apply to IN HOME and LIGHT INSTITUTIONAL USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. I ...
-
Life Fitness GYM SYSTEM G5 CABLE MOTION - page 21
LIFE FITNESS 5100 NOR TH RIVER ROAD. SCHILLER P ARK, IL 60176 U.S.A. T el: 1.847.288.3300 Fax: 1.800.216.8893 1.800.351.3737 (T oll-free within the U.S. and Canada) www .LifeFitness.com INTERNA TIONAL OFFICES LFG5-002 Rev A 08/07 Life Fitness Atlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 6 ...
Life Fitness GYM SYSTEM G5 CABLE MOTIONについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもLife Fitness GYM SYSTEM G5 CABLE MOTIONの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがLife Fitness GYM SYSTEM G5 CABLE MOTIONで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。