Ubiquiti Networks UB-UAP-PRO-1の取扱説明書

28ページ 関係なし
ダウンロード

ページに移動 of 28

Summary
  • Ubiquiti Networks UB-UAP-PRO-1 - page 1

    802.11ac Dual-Radio Pro Access Point Model: UAP-AC-PRO ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 2

    Introduction Thank you for purchasing the Ubiquiti Netw orks® UniFi®802.11ac Dual-Radio Pro A ccess Point. T his Quick Start Guide is designed to guide you through installation and includes warranty terms. Important: The UAP-AC-PRO requir es the UniFi Controller v4.7 or newer , av ailable at: downloads.ubnt.c om/unifi Package Contents UniFi ac ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 3

    Installation Requirements • Phillips screwdriver • Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting) • Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed) • Cat5/6 UTP cable for indoor installations Outdoor Installation Requirements Important: The UAP-AC-PRO ma y be installed outdoors under a ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 4

    Network T opology Requirements • A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniF i Controller v4.7 (or newer) software , located either on-site and connected to the same Layer-2 network, or off-sit e in the cloud or NOC Un ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 5

    Hardware Overview LED LED Color Status White F ac tory default, waiting to be integrated. Flashing White Initializing. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Blue Indicates the device has been successfully integrated into a network and is w ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 6

    Ports Main Port Secondary Port Security Slot Reset Button Secondary The Secondary por t is a Gigabit Ethernet port used for bridging. Reset The Reset button serves two functions for the UniF i AP: • Restart Press and release the Reset button quickly . • Restore to F ac tory Default Settings Press and hold the Reset button for more than five sec ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 7

    Hardware Installation The UniFi AP can be mounted on the w all or ceiling. P er form the steps for the appropriate installation: Wall Mount 1. Position the Mounting Brack et at the desired location on the wall with the Arrow pointing up. 2. Mark the four mounting holes, and use a 6 mm drill bit to drill the holes. Arrow 3. If your Ethernet cable fe ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 8

    4. Insert the Screw Anchors into the 6 mm holes. Secure the Mounting Bracket to the wall b y inser ting the Screws into the anchors. 5. Remove the rubber port cover from the UniF i AP . ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 9

    6. If the Ethernet cable is fed through the wall, skip to step7. If the Ethernet cable runs along the mounting surface, remove the cable feed plug . 7. Feed the Ethernet cable thr ough the port cover . Note: The feed hole will stretch to acc ommodate the RJ45 connector , and then seal around the cable. 8. Connect the Ethernet cable to the Main p ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 10

    9. Align the Notch on the top edge of the UniFi AP with the Arrow on the Mounting Bracket . Lock Ta b Arrow Notch 10. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock T ab engages. ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 11

    Ceiling Mount 1. Remove the ceiling tile. 2. Place the Ceiling Backing Plate in the center of the ceiling tile. Mark the four mounting screw holes and a 18 mm hole for the Ethernet cable feed . 18 mm Hole for Ethernet Cable Feed 3. Use a 3 mm drill bit to drill the screw holes, and cut or drill the hole for the Ethernet cable feed . ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 12

    4. Insert the Flat Head Screws through the Mounting Bracket , ceiling tile, and Ceiling Backing Plate . F asten the screws using the Keps Nuts . Then feed the Ethernet cable through the tile and bracket. ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 13

    5. Remove the port cover from the UniF i AP , and then feed the Ethernet cable through the port cover . Note: The feed hole will stretch to acc ommodate the RJ45 connector , and then seal around the cable. 6. Connect the Ethernet cable to the Main port and replace the port cover . ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 14

    *640-00183-06* 640-00183-06 7. Align the Notch on the top edge of the UniFi AP with the Arrow on the Mounting Bracket . Lock T ab Arrow Notch 8. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock T ab engages. 9. Set the ceiling tile back into place. ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 15

    Po wering the UniF i AP The U AP-AC-PRO features auto-sensing 802.3af/802.3at P oE support and can be powered by any of the following: • Ubiquiti Networks UniFi S witch • 802.3af/802.3at PoE+ compliant switch • Ubiquiti Networks Gigabit PoE A dapter (48V, 0.5A) The single-pack of the U AP-AC-PRO includes one Gigabit PoE adapter . For multi-pa ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 16

    Connecting to a PoE A dapter 1. Connect the Ethernet cable from the UniFi AP t o the POE port of the Gigabit PoE adapter . 2. Connect an Ethernet cable from your LAN to the LAN port of the Gigabit PoE adapter . 3. Connect the Power Cord to the adapt er , and then plug the Power Cord into a po wer outlet. Mounting the PoE Adapt er (Optional) 1. Remo ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 17

    Software Installation Download and install the latest version of the UniF i Controller software at: downloads.ubnt.com/unifi Launch the software and follow the on-screen instructions. Step-by-step instructions are available in the U ser Guide located on our website: documentation.ubnt .com/unifi After you have installed the software and run the Uni ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 18

    Specifications UAP-A C-PRO Dimensions 196.7 x196.7 x 35 mm (7.74 x 7.74 x 1.38") Weight with Mounting Kit 350 g (12.35 oz) 450 g (15.87 oz) Networking Interface (2) 10/100/1000 Ethernet Ports Buttons Reset Max. Power Consumption 9W Power Method PoE 802.3af/802.3at Power Supply 48V , 0.5A Gigabit PoE Adapter* Max. TX Power 2.4 GHz 5 GHz 22 dBm ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 19

    Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this produc t in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from light ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 20

    Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligat ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 21

    Disclaimer EXCEPT FOR ANY EXPRESS W ARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND IT S AND THEIR THIRD P ART Y DA T A, SERVICE, SOFTWARE AND HARDW ARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENT A TION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR ST A TUTORY , INCLUDING, BUT NO T LIMITED TO , REPRESENT A TIONS, GUARANT ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 22

    Note Some countries, states and provinces do not allo w exclusions of implied warranties or conditions, so the abov e exclusion may not apply to you . Y ou may have other rights that vary from country to country, state to state, or province t o province. Some countries , states and provinces do not allow the exclusion or limitation of liability for ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 23

    Industry Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian ICES-003. T o reduce potential radio interference to other users, the ant enna t ype and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for successful communication. This device comp ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 24

    RF Exposure W arning The antennas used for this transmitter must be installed to pro vide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter , except as listed for this product’ s certification. Les antennes utilisées pour cet émetteur doit être ins ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 25

    RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dis ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 26

    Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabil ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 27

    Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohlašuje, že tot o UBIQUITI NET WORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erk lærer at denne UBIQUITI NET WORKS enhed, er i overensstemmelse med de v æsentli ...

  • Ubiquiti Networks UB-UAP-PRO-1 - page 28

    Malti [Maltese] Hawnhekk, UBIQUITI NET WORKS, tiddikjara li dan il-mezz UBIQUITI NET WORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC. Norsk [Norwegian] Herved UBIQUITI NET WORKS, erklærer at denne UBIQUITI NET WORKS enheten, er i samsvar med de grunnleggende kravene og andre relevante ...

メーカー Ubiquiti Networks カテゴリー Access Point

Ubiquiti Networks UB-UAP-PRO-1のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- UB-UAP-PRO-1の取扱説明書
- Ubiquiti Networksの製品カード
- パンフレット
- またはUbiquiti Networks UB-UAP-PRO-1の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Ubiquiti Networks UB-UAP-PRO-1の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Ubiquiti Networks UB-UAP-PRO-1の取り付け説明書、サービスマニュアル、簡易説明書、またはUbiquiti Networks UB-UAP-PRO-1のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Ubiquiti Networks UB-UAP-PRO-1の製品を使用するにあたって最も人気のある説明書を閲覧できます。

Ubiquiti Networks UB-UAP-PRO-1デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがUbiquiti Networks UB-UAP-PRO-1を使用するのを助ける技術的文書のことです。説明書は通常、全てのUbiquiti Networks UB-UAP-PRO-1ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Ubiquiti Networksの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Ubiquiti Networks UB-UAP-PRO-1の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははUbiquiti Networks UB-UAP-PRO-1の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Ubiquiti Networks UB-UAP-PRO-1に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Ubiquiti Networks UB-UAP-PRO-1デバイスの基本機能を使うにあたってのヒント。 Ubiquiti Networks UB-UAP-PRO-1のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Ubiquiti Networks UB-UAP-PRO-1に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるUbiquiti Networks UB-UAP-PRO-1のメーカー/サービスへの連絡先に関する情報。

Ubiquiti Networks UB-UAP-PRO-1についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもUbiquiti Networks UB-UAP-PRO-1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがUbiquiti Networks UB-UAP-PRO-1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)