-
Life Fitness CSLAT - page 1
CLUB SERIES LAT PULLDOWN Part # 6941801 Rev A. Revision:08/02/00 1 ASSEMBLY INSTRUCTIONS ...
-
Life Fitness CSLAT - page 2
PARTS LIST KE Y PART # DESCRIPTION QT Y KE Y PART # DESCRIPTION QT Y 1 69046xx ASSY TOWER 1 9 3102922 3/8 X 2-3/4” BOLT 8 1A 69 2 0001 CABLE 1 10 3102905 3/8 X 3-3/4” BOLT 4 1B 6714901 GUIDE ROD BUSHINGS 2 11 3102807 3/8” LOW HEIGHT LOCK NUT 10 2 69032xx WLDMT, MAIN UPRIGHT 1 12 6957001 WEIGHT STACK LABEL 1 2A 6692601 3 X 2 END CAP 1 13 31025 ...
-
Life Fitness CSLAT - page 3
STEP 1: FIGURE 1 4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • LOOSEL Y assemble the T OWER (1) to the BENCH FRAME (3) using four RH CAPS (27), two 3/8 X 3-3/4” BOL TS (10), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (1 1) as shown in FIGURE 1. 1 10 3/8 X 3-3/4” 11 3 27 14 1B ...
-
Life Fitness CSLAT - page 4
1A 2 2N 2A 2M 2D 2E 2L 2K 2C 2I 2G 2J 2F 2H 2B 1A ...
-
Life Fitness CSLAT - page 5
5 FIGURE 2 STEP 2: • LOOSEL Y assemble the MAIN UPRIGHT (2) to the base of the BENCH FRAME (3) using four RH CAPS (27), two 3/8 X 3-3/ 4” BOL TS (10), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (11) as shown in FIGURE 2. 3/8 X 3-3/4” 10 9 3/8 X 2-3/4 27 14 13 2 11 3 • LOOSEL Y assemble the MAIN UPRIGHT (2) to the top t ...
-
Life Fitness CSLAT - page 6
6 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 3 STEP 3: • SECUREL Y assemble the KNEE SUPPOR T (5) to the BENCH FRAME (3) using two BLACK RH CAPS (17), two RH CAPS (27), two 3/8 X 2-3/4” BOL TS (9), four 3/8” SAE W ASHERS (13), four 3/8” RH W ASHERS (14) and two 3/8” LOW HEIGHT LOCK NUTS (1 1) as shown in FIGURE 3. 11 17 13 14 5 3 9 3/8 X ...
-
Life Fitness CSLAT - page 7
7 STEP 4 FIGURE 4 • SECUREL Y assemble the SEA T P AD (18) to the BENCH FRAME (3) using two RH CAPS (27), two 3/8 X 2-3/4” BOL TS (9) and two 3/8” RH W ASHERS (14) as shown in FIGURE 4. 3/8 X 2-3/4” 9 14 27 3 18 5A ...
-
Life Fitness CSLAT - page 8
8 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 5: FIGURE 5 • Insert the two GUIDE RODS (26) (found in the SHROUD KIT) into the base of the TOWER (1) as shown in FIGURE 5. Lubricate the GUIDE RODS (26) with a slicon or teflon spray that is available at most hardware stores. • Slide two WEIGHT ST ACK CUSHIONS (16) down over the GUIDE RODS (26). See ...
-
Life Fitness CSLAT - page 9
9 • Screw the treaded end of the CABLE all way into the end of the shaft on the HEAD PLA TE (8) and tighten jam nut securely . See FIGURE 6. STEP 6: FIGURE 6 • SECUREL Y assemble the GUIDE ROD SUPPOR T (6) to the TOWER (1) and MAIN UPRIGHT (2) using four RH CAPS (27), two 3/8 X 2-3/4” BOL TS (9), four 3/8” RH W ASHERS (14) and two 3/8” LO ...
-
Life Fitness CSLAT - page 10
0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 10 ST````` FIGURE 7 • Peel the backing off the WEIGHT ST ACK LABELS (12), line up sheet to the right of the selector opening and apply labels to the WEIGHT PLA TES (24), starting with the HEAD PLA TE (8) as shown in FIGURE 7. 12 8 24 TIGHTEN! • The WEIGHT ST ACK LABEL sheet (12) includes labels for both lbs. ...
-
Life Fitness CSLAT - page 11
11 FIGURE 8 • Assemble the PLACARD LABEL (22) or the FOREIGN LANGUAGE PLACARD LABEL (23) to the FRONT SHROUD as shown in FIGURE 8. STEP 8: 23 22 7 21 4 • Attach LA T BAR (4) and/or TRICEP ROPE (7) end of cable using on SNAP LINK (21) with the TRICEP ROPE (7) as shown in FIGURE 8. 29 31 32 4A ...
-
Life Fitness CSLAT - page 12
11 STEP 8: FIGURE 8 (NOTE: If the PARTIAL SHROUD KIT is being used follow STEP 8. If the FULL SHROUD KIT is being used follow STEP 9.) 28 3/8 X 3-1/2” 27S 1 12 • SECURELY assemble the FRONT PARTIAL SHROUD (29) and the REAR PARTIAL SHROUD (30) to the TOWER (1) using twelve 3/8 X 3-1/2” BUTTON HEAD BOLTS (28), twelve STARLOCK WASHERS (27), and ...
-
Life Fitness CSLAT - page 13
12 STEP 9: FIGURE 9 • SECURELY assemble the FRONT FULL SHROUD (31) and the REAR FULL SHROUD (32) to the TOWER (1) using ten 3/8 X 3-1/2” BUTTON HEAD BOLTS (28), ten STARLOCK WASHERS (27), and ten 3/8” ACORN NUTS (12) as shown in FIGURE 9. 3/8 X 3-1/2” 28 27 31 32 1 12 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...
-
Life Fitness CSLAT - page 14
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)328-9714. Inspect: • Cables for wear or damage and proper tension (should not exceed 3/4? ...
Life Fitness CSLATについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもLife Fitness CSLATの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがLife Fitness CSLATで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。