-
Casio 5214 - page 1
Operation Guide 5114 5214 E-1 ENGLISH Congratulations upon your selection of this CASIO watch. Applications The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude. Measurement results are indicated by the second hand of the watch and on the digital display. Such features make this watch useful when hikin ...
-
Casio 5214 - page 2
Operation Guide 5114 5214 E-8 E-82 Checking the Current Time in a Different Time Zone E-82 To enter the World Time Mode E-82 To view the time in another time zone E-83 To specify standard time or daylight saving time (DST) for a city E-84 To swap your Home City and World Time City E-86 Auto Correction of Hand Home Positions E-87 To trigger auto cor ...
-
Casio 5214 - page 3
Operation Guide 5114 5214 E-16 Approximate Reception Ranges UK and German Signals Anthorn 500 kilometers 1,500 kilometers The Anthorn signal is receivable within this area Mainflingen 2,000 miles (3,000 kilometers) 600 miles (1,000 kilometers) Fort Collins North American Signal Japanese Signals Chinese Signal 500 kilometers Changchun Beijing Shangq ...
-
Casio 5214 - page 4
Operation Guide 5114 5214 E-24 Selecting a Mode • The illustration below shows which buttons you need to press to navigate between modes. • To return to the Timekeeping Mode from any other mode, hold down D for about two seconds. • In any mode, press L to illuminate the display. World Time Mode Data Recall Mode Hand Home Position Adjustment M ...
-
Casio 5214 - page 5
Operation Guide 5114 5214 E-32 3. Press D to cycle through the available settings on the digital display in the sequence shown below. Thermometer/Barometer/ Altitude unit Auto Light On/Off Illumination Duration Button Operation Tone On/Off Day Month City Code DST 12/24-Hour Format Seconds Hour Minute Year • The fo llow ing ste ps expl ain ho w to ...
-
Casio 5214 - page 6
Operation Guide 5114 5214 E-40 4. Press C to start the calibration operation. • - - - is s how n on th e digit al dis play wh ile ca librat ion i s bein g per for med. W he n calib ratio n is suc cess ful, t he digi tal d isplay w ill sh ow OK an d the n chan ge to th e Com pas s Mod e scree n ( - - - ). Using the Compass While Mountain Climbing ...
-
Casio 5214 - page 7
Operation Guide 5114 5214 E-48 Barometer/Thermometer Mode Second Hand Units The second hand indicates barometric pressure differentials up to ±10hPa (in 1-hPa units). • The nearby illustration, for example, shows what the second hand would indicate when the calculated differential is approximately 5 hPa (approximately 0.15 inHg). • The second ...
-
Casio 5214 - page 8
Operation Guide 5114 5214 E-56 Using the Altitude Differential Value In the Altimeter Mode, the part of the watch’s dial from 11 o’clock to 7 o’clock acts as an altitude differential scale. The second hand points to a place on the scale that indicates the difference between the altitude at a start point set by you and the altitude at your cur ...
-
Casio 5214 - page 9
Operation Guide 5114 5214 E-64 Auto Save Values While the altitude auto measurement method is being used (page E-55), the watch automatically stores high altitude ( HI ), low altitude ( LO ), cumulative ascent ( ASC ), and cumulative descent ( DSC ) values. • These values are checked and updated automatically by the watch as altitude auto measure ...
-
Casio 5214 - page 10
Operation Guide 5114 5214 E-72 Viewing Altitude Records Use the Data Recall Mode to view manual save altitude records and automatically saved high altitude, low altitude, cumulative ascent, and cumulative descent values. Altitude records are created and saved in the Altimeter Mode. To view altitude records 1. Use D to select the Data Recall Mode ( ...
-
Casio 5214 - page 11
Operation Guide 5114 5214 E-80 To set an alarm time 1. In the Alarm Mode, use A and C to scroll through the alarm ( –1 through –5 ) until the one whose time you want to set is displayed. −1 −2 −3 −5 −4 2. Hold down E until each of the following steps occurs. • Ho ld S ET appears on the digital displa y. ➝ T he cu rrent s ett ing ? ...
-
Casio 5214 - page 12
Operation Guide 5114 5214 E-88 Adjusting Home Positions Manually Strong magnetism or impact can cause the hands of the watch to be off, even if the watch is able to perform the signal receive operation. When this happens, you can manually adjust the hand home positions to ensure correct timekeeping. • Hand home position adjustment is not necessar ...
-
Casio 5214 - page 13
Operation Guide 5114 5214 E-96 Troubleshooting Time Setting See “Radio Controlled Atomic Timekeeping” (page E-15) for information about adjusting the time setting according to a time calibration signal. ■ The current time setting is off by hours. Your Home City setting may be wrong (page E-28). Check your Home City setting and correct it, if ...
-
Casio 5214 - page 14
Operation Guide 5114 5214 E-104 Thermometer: Measurement and display range: –10.0 to 60.0 °C (or 14.0 to 140.0 °F) Display unit: 0.1 °C (or 0.2 °F) Measurement timing: Every fi ve seconds in the Barometer/Thermometer Mode Other: Calibration; Manual measurement (button operation) Altimeter: Measurement range: –700 to 10,000 m (or –2,300 t ...
Casio 5214についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもCasio 5214の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCasio 5214で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。