Porter-Cable 2615の取扱説明書

15ページ 0.19 mb
ダウンロード

ページに移動 of 15

Summary
  • Porter-Cable 2615 - page 1

    Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ IMPORTANT Please make certain tha ...

  • Porter-Cable 2615 - page 2

    2 Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are ...

  • Porter-Cable 2615 - page 3

    3 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ● lead from lead-based paints ● crystalline silica from bricks and cement and other masonry pro ...

  • Porter-Cable 2615 - page 4

    4 Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work a ...

  • Porter-Cable 2615 - page 5

    5 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose ...

  • Porter-Cable 2615 - page 6

    6 ADDITIONAL SPECIFIC SAFETY RULES SAVE THESE INSTRUCTIONS! 1. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. 2. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. 3. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contac ...

  • Porter-Cable 2615 - page 7

    7 2 N ........................ two-phase alternating current with neutral 3 ........................ three-phase alternating current 3 N ........................ three-phase alternating current with neutral ........................ rated current of the appropriate fuse-link in amperes ........................ time-lag miniature fuse-link where X is ...

  • Porter-Cable 2615 - page 8

    8 FOREWORD FUNCTIONAL DESCRIPTION CARTON CONTENTS Carton contents include the drill, an auxiliary handle for models 2614 and 2615 only, an instruction manual, and a parts list. ASSEMBL Y Porter-Cable drills are designed to drill holes of various sizes in wood and metal as indicated in the following chart: NOTE: This tool is shipped completely assem ...

  • Porter-Cable 2615 - page 9

    9 A TT ACHING THE AUXILIAR Y HANDLE Hold the auxiliary handle as illustrated in Fig. 6. This grip helps you resist the rotational force and prevents accidental electrical shock, should you accidentally drill into a live wire. Use the auxiliary handle during all drilling operations. Disconnect tool from power source. 1. Insert the square nut (A) Fig ...

  • Porter-Cable 2615 - page 10

    10 3. Your tool will operate in either the forward direction (clockwise rotation) for drilling holes, or the reverse direction (counter-clockwise rotation) for releasing jammed drill bits. For counter-clockwise rotation, stop the motor by releasing the trigger switch. Push the reversing switch (C) Fig. 4 for counter-clockwise rotation, release the ...

  • Porter-Cable 2615 - page 11

    11 6. If the drill stalls or the bit becomes jammed in the hole, release the trigger immediately. Remove the drill bit from work and determine the cause of stalling or jamming. Do not squeeze the trigger “ON” AND “OFF” to free a stalled drill or jammed bit. This will damage the motor. You can reverse the direction of rotation to help free a ...

  • Porter-Cable 2615 - page 12

    For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665. TROUBLESHOOTING 12 4. INSTALL THE CHUCK: Open the jaws of the replacement chuck as wide as possible. Thread the chuck on the spindle by turning the chuck clockwise. Hand tighten. Place a hex wr ...

  • Porter-Cable 2615 - page 13

    13 KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. Wear ANSI Z87.1 safety glasses while using compressed air. F AILURE TO ST ART Should your tool fail t ...

  • Porter-Cable 2615 - page 14

    14 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material du ...

  • Porter-Cable 2615 - page 15

    The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , D ...

メーカー Porter-Cable カテゴリー Drill

Porter-Cable 2615のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 2615の取扱説明書
- Porter-Cableの製品カード
- パンフレット
- またはPorter-Cable 2615の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Porter-Cable 2615の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Porter-Cable 2615の取り付け説明書、サービスマニュアル、簡易説明書、またはPorter-Cable 2615のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Porter-Cable 2615の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Porter-Cable 2615デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPorter-Cable 2615を使用するのを助ける技術的文書のことです。説明書は通常、全てのPorter-Cable 2615ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Porter-Cableの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Porter-Cable 2615の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPorter-Cable 2615の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Porter-Cable 2615に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Porter-Cable 2615デバイスの基本機能を使うにあたってのヒント。 Porter-Cable 2615のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Porter-Cable 2615に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPorter-Cable 2615のメーカー/サービスへの連絡先に関する情報。

Porter-Cable 2615についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPorter-Cable 2615の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPorter-Cable 2615で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)