-
Mitsubishi Electronics P91DW(UB) - page 1
This digital monochrome printer complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small- scale enterprises, inside as well as outside of th ...
-
Mitsubishi Electronics P91DW(UB) - page 2
FOR THE MODEL P91DW(UB) ONL Y W ARNING: In the USA or Canada, use the AC power cord according to the recommendations as below , in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1. Case 1. Connect to the 120V receptacle of the room or the host equipment. The AC power cord should be UL or CSA approved and consist of type SJT , size 16 or 18 ...
-
Mitsubishi Electronics P91DW(UB) - page 3
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to aler ...
-
Mitsubishi Electronics P91DW(UB) - page 4
1 CONTENTS ................................................................. 1 PRECAUTIONS ..................................................... 2 - 4 UNP ACKING ............................................................... 5 FEA TURES AND FUNCTIONS Front Panel .............................................................. 6 Rear Panel .......... ...
-
Mitsubishi Electronics P91DW(UB) - page 5
2 In the interest of safety , please observe the following pre- cautions: POWER REQUIREMENT This Digital monochrome printer is designed for opera- tion on 120/220-240V AC 50/60Hz in U.S.A and Canada, 220-240V AC 50/60Hz in Europe. Never connect to any outlet or power supply having a different voltage or fre- PRECAUTIONS 2 quency . W ARNING : THIS A ...
-
Mitsubishi Electronics P91DW(UB) - page 6
3 FOR LONG OPERA TING LIFE UNSUIT ABLE MA TERIALS FOR THE UNIT Many plastic components are used in the backside. Coat flaking and deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other sol- vent, if rubbers or PVC items are left in contact with the unit for extended duration, or if the unit is spra ...
-
Mitsubishi Electronics P91DW(UB) - page 7
4 SAFETY TECHNICAL CHECKS Periods: According to the recommendations of the manufacturer of medical device. Scope: a) Visual check Housing, cables, operator controls, readout device ( displays, LED etc.), labels, accessories, instruction manual. b) Function test Performance check acc. instruction manual, also unity and applicability of set and acces ...
-
Mitsubishi Electronics P91DW(UB) - page 8
5 UNP ACKING 3 Open the top of the box. Remove the cushion above the unit. • Make sure to keep the unit horizontal. T ake the unit out of the box carefully . T ake the unit out of the box by the following procedures. Make sure to check the contents. Unwrap the unit. F U N C D O W N S E T U P G A M M A F E E D COPY Accessories Cleaning paper Opera ...
-
Mitsubishi Electronics P91DW(UB) - page 9
6 FEA TURES AND FUNCTIONS 4 Front Panel T urns on/off the power . Power switch Function mode changes whenever FUNC is pressed. FUNC button Press to change the value in function mode. DOWN button UP button Press to change the value in function mode. Press to set each function value and γ - curve. SET button Displays stand-by , functions and error m ...
-
Mitsubishi Electronics P91DW(UB) - page 10
7 Rear Panel Select special functions. Mode switches USB terminal Function Name Reference page 10 10 Connects to the device equipped with USB interface such as personal computer . - - Power terminal (AC LINE) Connect the power cord to this terminal. Potential equalization terminal Makes the connected equipment of potential equal. POTENTIAL EQUALIZA ...
-
Mitsubishi Electronics P91DW(UB) - page 11
8 Close the door . INST ALLA TION OF P APER 5 Moisture, fingerprints or dust on the paper surface may cause a noise at printing or deterioration in print quality . Set the paper in the following procedure to prevent adhesion of fingerprint or dust on the paper surface. Open the door . • Switch the lever located on the left side to the “OPEN” ...
-
Mitsubishi Electronics P91DW(UB) - page 12
9 When setting the paper , observe the following precautions to prevent paper jam. Do not use the bent or wrinkled paper . Do not use defective paper . Do not slack the roll paper . Set the paper tightly to remove any slack. If the side of the print paper is uneven or the core is sticking out, the amount of paper feeding after printing may vary . W ...
-
Mitsubishi Electronics P91DW(UB) - page 13
10 EXAMPLE OF CONNECTION 6 Connecting to various equipment with USB interface such as medical equipment and personal computer . Connection T urn off the power switches of the digital monochrome printer and the equipment to be connected. Connect the digital monochrome printer with PC or medical equipment through a USB cable. Insert the USB cable to ...
-
Mitsubishi Electronics P91DW(UB) - page 14
11 PRINTING 7 Printing procedure Y ou can set the number of copies by pressing the COPY button on the front panel. Y ou can copy the same picture as many times as you desire until a new image data is printed. When the COPY button is pressed during copy printing, the current image will be completed and the rest will not be printed. The set number of ...
-
Mitsubishi Electronics P91DW(UB) - page 15
12 By pressing the "FEED" button on the front panel, you can feed the paper . Paper feeding If printing is continued with a very black picture, the printer will become overheated and printing will not be available. " " is indicated, and the button functions become invalid. In this case, wait for a while until the unit is cooled ...
-
Mitsubishi Electronics P91DW(UB) - page 16
13 8 ADJUSTMENT OF PRINT PICTURE Selection of Gamma ( γ ) Curve γ− curve set mode Y ou can select γ -curve by pressing the gamma button " ". Each time the button is pressed, the indicator and γ -curve number is switched. After a γ -curve number has been selected, press the "SET" button to store the γ -curve number . This ...
-
Mitsubishi Electronics P91DW(UB) - page 17
14 9 SETTING OF FUNCTION MODE Select a function mode by pressing the FUNC button. Paper type selection mode Paper saving mode Set condition printing mode Buzzer set mode Standby • Each time the FUNC button is pressed, the mode is switched as shown below . FUNC DOWN SET UP GAMMA FEED ...
-
Mitsubishi Electronics P91DW(UB) - page 18
15 Adjustment contents Indicator/Adjustable item Printer condi- tion printing mode Paper saving mode Paper type selection mode Mode to select paper type. : Standard paper : High density paper or High glossy paper Mode to select paper saving mode. : Paper saving mode OFF : Paper saving mode ON Mode to select whether the printer conditions will be pr ...
-
Mitsubishi Electronics P91DW(UB) - page 19
16 10 When an error in operation occurs, an audible alarm and a visible error is displayed in the LED indicator . Cause/Error display Cause/Error display Cause/Error display No paper Overheat ERROR DISPLA Y [Symptom] • When the paper runs out or the paper is not installed, printing becomes impossible and alarm tone is given. In this case, all the ...
-
Mitsubishi Electronics P91DW(UB) - page 20
17 Cause/Error display Cause/Error display [Symptom] • When the door opens, an alarm tone is given. Symptom/Remedy Symptom/Remedy [Remedy] Close the door . [Symptom] • When the thermal head does not automatically go up after printing, an alarm tone is given. • " " is displayed in the indicator and all the functions of buttons and sw ...
-
Mitsubishi Electronics P91DW(UB) - page 21
18 11 Set state/Mode LED display Left Point and right Contents of right side LED display Power off Stand-by Print state Paper type setting mode γ -curve set mode ( γ -curve) Paper saving mode Error detect state Power off During data receiving Copy state Number of copies γ -curve No. Standard / High density or High glossy Overheat No paper Button ...
-
Mitsubishi Electronics P91DW(UB) - page 22
19 12 When the thermal head is dirty with dust and perspiration, etc., white spots or stripes may appear on the print. In this case, clean the thermal head in the following procedure BY USING THE SUPPLIED CLEANING P APER. Roll the cleaning paper and install into the set. Switch the left side lever to the " OPEN " position. Press the " ...
-
Mitsubishi Electronics P91DW(UB) - page 23
20 13 MAINTENANCE T urn off the power for maintenance. Maintenance of Main Unit Wipe off stains of the front panel with a soft cloth. When the panel is heavily stained, wipe of with the cloth moistened with neutral cleanser diluted by water and finish with a dry cloth. Maintenance of Rubber Roller When the rubber roller is dirty with dust, etc., a ...
-
Mitsubishi Electronics P91DW(UB) - page 24
21 14 SPECIFICA TIONS T ype: Digital Monochrome Printer Model: P91DW(UB) Power supply and power consumption: 120V AC, 50/60Hz, 1.4A 220-240V AC, 50/60Hz, 0.8A Connection terminal: USB interface (Series "B" receptacle) Dot resolution: 1024 x 1024 pixels (Standard) (Max. 1024 x 5120 pixels) Gradation: 256 gradations Printing speed: 5.1 sec ...
-
Mitsubishi Electronics P91DW(UB) - page 25
MITSUBISHI DIGIT AL ELECTRONICS AMERICA, INC. 9351 Jeronimo Road, Irvine, CA 92618 Phone 949-465-6000 Made from recycled paper 871C593A7 PRINTED IN JAP AN Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan Mitsubishi Electric Europe B.V . UK Branch T ravellers Lane, Hatfield, Herts. AL10 8XB, England, U.K. P ...
Mitsubishi Electronics P91DW(UB)についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもMitsubishi Electronics P91DW(UB)の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi Electronics P91DW(UB)で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。