Cisco RVS4000の取扱説明書

195ページ 関係なし
ダウンロード

ページに移動 of 195

Summary
  • Cisco RVS4000 - page 1

    Cis c o Small Busine s s RVS4000 4-P or t Gigabit S ecurit y Rout er with VPN ADMINISTR A TION GUIDE ...

  • Cisco RVS4000 - page 2

    © 2011 Cisco Syst ems, Inc. All rights reser ved. OL -22605- 02 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. an d/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www . ci sco .c om / g o / tr ad em a r k s . Third party trademar ks mentioned are the property of their respect ...

  • Cisco RVS4000 - page 3

    Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 3 Con t e n ts Chapter 1: Introduction 8 Chapter 2: Networking and Security Basics 9 An Introduction to LANs 9 The Use of IP Addresses 10 The Intrusion Prevention System (IPS) 11 Chapter 3: Planning Your Vi rtual Private Network (VPN) 13 Why do I need a VPN? 13 1) MAC Address Spoofing 14 ...

  • Cisco RVS4000 - page 4

    Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 4 Con t e n ts Setup > DMZ 40 Setup > MAC Address Clone 41 Setup > Advanced Routing 42 Setup > Time 44 Setup > IP Mode 45 Firewall 46 Firewall > Basic Settings 46 Firewall > IP Based ACL 48 Firewall > Internet Access Policy 51 Firewall > Single Port Forwarding ...

  • Cisco RVS4000 - page 5

    Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 5 Con t e n ts IPS 82 IPS > Configuration 82 IPS > P2P/IM 83 IPS > Report 84 IPS > Information 86 L2 Switch 86 L2 Switch > Create VLAN 86 L2 Switch > VLAN Port Setting 88 L2 Switch > VLAN Membership 89 L2 Switch > RADIUS 90 L2 Switch > Port Setting 91 L2 Switch ...

  • Cisco RVS4000 - page 6

    Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 6 Con t e n ts Downloading and Installing from the Internet 137 Using the Cisco QuickVPN Software 137 Distributing Certificate s to QuickVPN Users 140 Appendix C: Configuring IPSec with a Windows 2000 or XP Computer 142 Introduction 142 Environment 143 Windows 2000 or Windows XP 143 RVS4 ...

  • Cisco RVS4000 - page 7

    Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 7 Con t e n ts Setup/Config 190 Management 191 Security Features 191 QoS 191 Network 192 VPN 192 Routing 192 Layer 2 192 Environmental 193 Appendix G: Where to Go From Here 194 Product Resources 194 Related Documentation 195 ...

  • Cisco RVS4000 - page 8

    1 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 8 In tr o duc tion Thank you f or choosing the Cis co RVS4000 4-P or t Gigabit Se curity Router with VP N. T he 4- Po r t Gi ga bi t S e c ur i t y Ro u ter wi t h V PN is an a dv an c e d I nte rn e t-s ha ri n g network s olution f or your small busines s needs . Like an y rout er , ...

  • Cisco RVS4000 - page 9

    2 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 9 Net working and S e curit y B asic s This chapter describes net working and secu rit y basics . It includes these se ctions: • An Intr o duction to L ANs, page 9 • The Use of IP Addre ss es, p age 10 • The Intrusion Pre vention System (IPS), page 11 An Intr o duc tion to L ANs ...

  • Cisco RVS4000 - page 10

    Net working and S ecurit y B asics The Use of IP Addr e ss es Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 10 2 The Us e of IP Addre s s es IP stands f or Internet Pr otocol. Ev er y device in an IP -b ased net work , including PC s, print ser vers, and rout ers , requir es an IP address to identify its location, or addr es s, on t ...

  • Cisco RVS4000 - page 11

    Net working and S ecurit y B asics The In trusion Pr evention Sys tem (IPS) Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 11 2 NOTE Since the router is a device that connects t wo networks , it needs t wo IP addr es ses—one f or the L AN, and one f or the Int ernet . In this Administration Guide, you’ll see ref erences to the ? ...

  • Cisco RVS4000 - page 12

    Net working and S ecurit y B asics The In trusion Pr evention Sys tem (IPS) Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 12 2 IPS Sc enario s ...

  • Cisco RVS4000 - page 13

    3 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 13 Planning Y our Vir tual Priva te Net work ( VPN) This chapter pr ovide s inf ormation for pl anning y our VPN. It include s these secti ons: • Why do I nee d a VPN?, page 13 • What is a VPN?, page 15 Why do I ne e d a VPN? Computer networking provides a fle xibil it y not availa ...

  • Cisco RVS4000 - page 14

    Planning Y our Vir tual Priva te Net work ( VPN) W hy do I need a V PN? Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 14 3 1 ) MA C Ad dr ess S poof in g Pack ets transmit t ed over a network , either your local network or the Internet, are pr ec eded by a packet header . The se pack et headers contain b oth the source and destinati ...

  • Cisco RVS4000 - page 15

    Planning Y our Vir tual Priva te Net work ( VPN) Wh at is a VP N? Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 15 3 Wha t is a VPN? A VPN, or V ir tual Privat e Network , is a connection b etwe en two endp oints—a VPN r outer , f o r instance—in diff erent networks that allows privat e data to be sent securely over a shar ed or ...

  • Cisco RVS4000 - page 16

    Planning Y our Vir tual Priva te Net work ( VPN) Wh at is a VP N? Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 16 3 VPN Router to VPN Router W ith a VPN-rout er-t o- VPN-rout er VPN, a telecommuter uses his VPN rout er f or his always-on Int ernet c onnection. His r outer is c onfigur ed with his office’ s VPN settings . When he ...

  • Cisco RVS4000 - page 17

    Planning Y our Vir tual Priva te Net work ( VPN) Wh at is a VP N? Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 17 3 C omputer (using the Cisc o QuickVPN Client sof t ware) to VPN Router In this illustration, you se e an e xample of a comput er -to- VPN rout er VPN. In her hotel r o om, a tra veling busines swoman connects to her IS ...

  • Cisco RVS4000 - page 18

    4 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 18 Get ting St ar te d with the R VS 4000 Router This chapter describe s the physical f eatures of the RVS4000 r out er and ex plains how t o install the rout er . It includes these s ections : • Fro nt Pa ne l, p a ge 1 8 • B ack Panel, page 19 • Placement Options, p age 20 • ...

  • Cisco RVS4000 - page 19

    Get ting Star ted with the R VS 4000 Router Back P ane l Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 19 4 B ack Panel The Ethernet por ts , Int ernet por t , Reset but ton, and P ower por t are on the back panel of the rout er . Ba c k P a n e l IPS LED : Steady gr een when the Intrusion Pr evention S ystem (IPS) function is enabl ...

  • Cisco RVS4000 - page 20

    Get ting Star ted with the R VS 4000 Router Placement Options Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 20 4 Plac ement Options Y ou can place the router horiz ontally on th e rubber f eet , mount it in the stand, or mount it on the wall. D esktop Option F or desktop placement , place the Cisc o RVS4000 r outer horizontally on a ...

  • Cisco RVS4000 - page 21

    Get ting Star ted with the R VS 4000 Router Placement Options Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 21 4 T o place the r outer v er tically , f ollow these steps. STEP 1 L o cat e the left side panel of the rout er . STEP 2 W ith the t wo large pr ongs of one of the stands f acing outward, inser t the shor t pr ongs int o th ...

  • Cisco RVS4000 - page 22

    Get ting Star ted with the R VS 4000 Router Ins talling the Router Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 22 4 Installing the Router T o prepar e the rout er f or i nstallation c omplete these tasks : • Obtain the setup inf ormation f or your specific t ype of Internet connection fro m your Int ernet Ser vice Pr ovider (IS ...

  • Cisco RVS4000 - page 23

    Get ting Star ted with the R VS 4000 Router Configuring the R outer Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 23 4 STEP 4 P ower on the cable or DS L modem. STEP 5 Connect the power adapter t o the rout er ’ s Power por t and plug the other end int o an electrical outl et . STEP 6 The P ower and Internet LEDs on the fr ont pan ...

  • Cisco RVS4000 - page 24

    Get ting Star ted with the R VS 4000 Router Configuring the R outer Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 24 4 STEP 4 Click OK . F or adde d securit y , you should lat er set a new password on the Administration > Man a g em e nt page of the configuration utility . STEP 5 The configuration utility app ears with the Setup ...

  • Cisco RVS4000 - page 25

    5 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 25 S et ting Up and C onfiguring the Router This chapter e xplains how to configure these rout er fun ctions: • Setup, p age 26 • Fir ew al l, p a ge 46 • VPN, page 58 • QoS , pa ge 67 • Admi nis tra tio n, pag e 72 • IPS, page 82 • L2 Switch, p age 86 • Stat us, page 9 ...

  • Cisco RVS4000 - page 26

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 26 5 Lo gin Window After you log in, the configuration utility star ts . The menus appear as links in the na vigation pane on the left side of the screen. After y ou select a menu, a list of windows appears . T o per f orm a spe cific functio ...

  • Cisco RVS4000 - page 27

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 27 5 Setup > Summar y System Information Fir mw ar e v er si on Displays the r outer ’ s current firmw are v ersion. CPU Displays the r outer ’ s CPU typ e. System u p time Displa ys the length of time that has elaps ed since the rout ...

  • Cisco RVS4000 - page 28

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 28 5 Net work S et ting Status LA N I P The IP addres s of the r outer ’ s LAN inter face. WA N I P The IP addr es s of the r outer ’ s W AN inter f ace. If this address was as signed by using DHCP , click DHCP Rele ase to release the add ...

  • Cisco RVS4000 - page 29

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 29 5 Se tu p > W A N Internet Conne ction Typ e The r outer suppor ts six type s of connections . Each Se tup > W A N window and a vailable f eatures differ , depending on the sele ct ed conne ction typ e. Automatic Configuration - DHCP ...

  • Cisco RVS4000 - page 30

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 30 5 Sta ti c I P If your connection use s a permanent IP address to connect to the Int ernet , then select Static IP . Static IP Internet IP Address The router ’ s IP addres s, when se en fr om the W AN, or the Int ernet . Y our IS P will ...

  • Cisco RVS4000 - page 31

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 31 5 PPPoE Some DS L -b ased IS Ps use PPP oE (Point -to-P oint Prot ocol over Ethernet) t o establish Internet connections . If you conne ct t o the Internet thr ough a D SL line, check with your ISP to see if they use PPPoE. If they do, ena ...

  • Cisco RVS4000 - page 32

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 32 5 Ke e p A l iv e : R e d i al p e r io d If you select this option, the rout er perio dically checks your Int ernet c onnection. If you ar e disc o nnect ed, then the r out er aut omatically re- establishes your conne ction. T o use this ...

  • Cisco RVS4000 - page 33

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 33 5 Conne ct on Dem and: Max Idle Time Y ou can configure the r outer to cut the Int ernet connection after it has been inactive f or a specified period of time (Max Idle T ime), and then aut omatically re-e stablish the c onnection as so on ...

  • Cisco RVS4000 - page 34

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 34 5 Conne ct on Dem and: Max Idle Time Y ou can configure the r outer to cut the Int ernet connection after it has been inactive f or a specified period of time (Max Idle T ime), and then aut omatically re-e stablish the c onnection as so on ...

  • Cisco RVS4000 - page 35

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 35 5 Gatewa y Y our IS P will pr ovide you with the Default Gat ewa y Address . L2TP S er ver Enter the IP addr es s of the L2TP ser ver . Us er Name and Pas sword Enter the User Name and P as sword pro vided by your ISP . Conne ct on Dem and ...

  • Cisco RVS4000 - page 36

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 36 5 Optional S et tings (Required by s ome ISPs) Y our IS P may r equ ir e some of the se set tings. V erif y with your ISP bef ore making any changes. Optional S et tings Ho st Name Some IS Ps, usually cable IS Ps, require a host name as id ...

  • Cisco RVS4000 - page 37

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 37 5 DDNS Ser vic e DDNS Ser vice is disabled by def ault . T o enable D DNS Ser vice, f ollow thes e instructions: Co nnec t The Co nnec t button is displa yed when DDNS is enabled. Y ou can click this button to contact the DDNS ser ver to m ...

  • Cisco RVS4000 - page 38

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 38 5 Se tu p > L AN The Se tu p > L A N window allows you t o change the r o ut er ’ s local net work settings. Setup > L AN ...

  • Cisco RVS4000 - page 39

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 39 5 VL AN Select the VL AN f or the DHCP ser ver from the dr op- down menu. NOTE This option appears only if you ha ve creat e d at least one VL AN fro m the L2 S witch > Create VL AN window . IP v4 The rout er ’ s L ocal IP Address and ...

  • Cisco RVS4000 - page 40

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 40 5 Static IP Mapping Static IP Mapping is us ed to bind a specific IP addres s to a specific MAC address . This helps external (W AN) us ers to acces s LAN s er vers that are adv er tised through NAPT por t f or warding. Y ou can define up ...

  • Cisco RVS4000 - page 41

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 41 5 Setup > DMZ DMZ Hosting This f eature allows one local P C t o b e e xpos ed to the Int e rnet f or use of a special-purp ose ser vic e such as Int ernet gaming and vide oconfe rencing. T o use this f eature, select En able . T o disa ...

  • Cisco RVS4000 - page 42

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 42 5 S etup > Advanc ed Routing Setup > Ad vance d Routing Operating Mode Operation Mode Sele ct the Operating mode f or this rout er : • Gatewa y The normal mode of operation. This allows all devic es on your LAN to share the same W ...

  • Cisco RVS4000 - page 43

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 43 5 RIP S end Pack et V ersion Cho ose the TX prot oc ol to use to transmit data on the network : RIP v1 or RIP v2 . This sett ing should mat ch the version suppor ted by other r outers on y our LAN. RIP Re cv Pack et V ersion Choose the RX ...

  • Cisco RVS4000 - page 44

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 44 5 Click Sa ve t o save y our changes , or click Canc el to undo your changes . Se tu p > Ti m e Set up > Tim e Set the lo cal time Manually If you wish to ent er the time and date manually , select this option, then select the Dat e ...

  • Cisco RVS4000 - page 45

    Set ting Up and Configuring the Router Se tup Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 45 5 Setup > IP Mo de Set up > I P Mod e IP v4 Only Sele ct this option t o us e IPv4 on the Int ernet and local net work . Dual-Stack IP Select this option to use IPv 4 on the Int ernet and IPv4 and IPv6 on the local net work . IP v6 h ...

  • Cisco RVS4000 - page 46

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 46 5 F irewall Use the Fir ewall menu to configure the r outer t o deny or allow specific int ernal users fr om acce ssing the Internet . Y ou can als o configure the r outer t o deny or allow specific Internet users from acces sing the ...

  • Cisco RVS4000 - page 47

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 47 5 HT TP S This option limits acces s t o the configuration utilit y fr om the W AN t o http s ses sions only . An http s ses sion use s SS L encr yption, which provides bet t er pr otection f or your re mote session than do es ht tp. ...

  • Cisco RVS4000 - page 48

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 48 5 F irewall > IP B ase d ACL The IP -B ased ACL window allows you to creat e an Ac ces s Control List (ACL ) with up t o 50 rules . Each A CL rule denies or allows acce ss to the network based on various criteria including priorit ...

  • Cisco RVS4000 - page 49

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 49 5 T o add a new rule t o the ACL rule table, click Add New Rule and the Ed it IP ACL Rule window appears . F ollow the instructions in the section b elow t o cr eate a new ACL rule. T o disable all the rule s without deleting them, cl ...

  • Cisco RVS4000 - page 50

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 50 5 Sourc e Interfac e Select the s our c e int er face, WAN , LA N , or ANY , fr om the drop- down menu. Sou rce IP T o ap ply t he r ule to one s ou rce IP add res s , s ele ct Single from the dr op- down menu, then ente r the addr es ...

  • Cisco RVS4000 - page 51

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 51 5 F irewall > In ternet Ac c es s Polic y Fir ewall > Internet Acc e ss Policy Y ou can manage acc es s t o your net work by configuring a policy . Use the set tings on this window t o establish an acce ss policy . Sele ct a pol ...

  • Cisco RVS4000 - page 52

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 52 5 • View all p olicies : Click Summ ar y to d is pl ay t he I nternet Po licy Summary window , which lists all of the Internet acces s policie s and includes this inf ormation: No., Policy Name, Days, T ime, and a check box t o dele ...

  • Cisco RVS4000 - page 53

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 53 5 On the List of P Cs p opup, you can define PCs by MAC Addr e ss or IP Addres s. Y ou can also ente r a range of IP Addr e sse s if yo u want this policy to a ffect a gr oup of PC s. T o cr eate an Int ernet Acce ss p olicy: STEP 1 S ...

  • Cisco RVS4000 - page 54

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 54 5 F irewall > Single Por t For warding F i r e wa ll > Si n g le P o rt F o rw a r d in g Applic a ti on Ent er the name of the application you wish t o configure. Ex ternal Por t The por t number use d by the ser ver or Interne ...

  • Cisco RVS4000 - page 55

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 55 5 Enable d Click the Enable d checkbo oks t o enable por t f or war ding f or the r elevant application. Click Sa ve t o save y our changes , or click Canc el to undo your changes . F irewall > Por t Range For warding Fir ewall > ...

  • Cisco RVS4000 - page 56

    Set ting Up and Configuring the Router Fi rew a ll Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 56 5 F irewall > Port Range Triggering Fir ewall > Por t Range Triggering Applic a ti on Name Ent er the name of the application you wish t o c onfigur e. T riggere d Range F or each application, list the triggered por t number ran ...

  • Cisco RVS4000 - page 57

    Set ting Up and Configuring the Router Pro te ctLink Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 57 5 Protec tLink Protec tLink > Protec tLink Purc has e Prote ctLink > Protec tLink Purchas e The optional Cisco Prot e ctLink W eb ser vic e pr ovide s securit y f or your network . F or m or e information, see Appendix E, “C ...

  • Cisco RVS4000 - page 58

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 58 5 VPN VPN > Summar y VPN > Summar y Tu n ne l s U s e d Displa ys the number of tunnels used. Tu n ne l ( s ) Ava i l a bl e Displays the number of available tunnels. Det ail but ton Click Deta il to displa y more tunnel inf ormation. T ...

  • Cisco RVS4000 - page 59

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 59 5 Con fi g Click Edit t o change the tunnel’ s set tings . Click Tr as h to delet e all of the tunnel’ s se ttings. Tu n ne l ( s ) En a bl e d Displa ys the total number of curr ently enabled tunnels . T unnel(s) De fined Displa ys the n ...

  • Cisco RVS4000 - page 60

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 60 5 VPN > IPS ec VPN Use the VPN > IP Se c VPN window t o creat e and configure a V ir tual Private Network ( VPN) tunnel. VPN > IPS ec VPN ...

  • Cisco RVS4000 - page 61

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 61 5 Sele ct Tunnel Entr y T o cr eate a new tunnel, select new . T o configure an e xisting tunnel, sele ct it fr om the drop-down menu. Del ete Click this but ton t o delete all set tings f or the sele ct ed tunnel. Summar y Clicking this butt ...

  • Cisco RVS4000 - page 62

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 62 5 domain name in the Domain Name field. Then select either IP A ddr es s or IP by DNS Res olved from the drop-down menu, and fill in the IP Addre s s field or Domain Na me field. Remote S ecurit y Group Type Select the remote LAN user(s) behi ...

  • Cisco RVS4000 - page 63

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 63 5 • Encr yption The Encr yption method determines the length of the ke y used t o encr ypt / decr ypt ES P packets. Only 3DES is suppor ted. Not e that both sides must us e the same Encr yption method. • Authentication Authentication det ...

  • Cisco RVS4000 - page 64

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 64 5 Aggr e ssiv e Mode Specifie s the type of Phase 1 e xchange, Main mode or Aggr es sive mode. Check the box t o select Aggres sive Mode or leave the bo x unchecked (default) t o select Main mode. Aggres sive mode r equires half of the main m ...

  • Cisco RVS4000 - page 65

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 65 5 Re-enter to Confirm Retype the pas swor d to ensur e it has been enter e d corr ectly . Allow User to Change Pas sword This option det ermine s whether a user can change his or her own pass wor d. VPN Client List T able No. Displays the use ...

  • Cisco RVS4000 - page 66

    Set ting Up and Configuring the Router VPN Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 66 5 VPN > VPN Pas sthrough VPN > VPN Pass thr ough IPS ec Pas sThr ough Inte rnet Prot oc ol Securit y (IPSe c ) is a suite of prot o cols used t o implement secure e xchange of pack ets at the IP layer . IPSec Passthrough is enabled by d ...

  • Cisco RVS4000 - page 67

    Set ting Up and Configuring the Router QoS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 67 5 Qo S Y ou can us e QoS (Quality of S er vice) to perform Bandwidth Management , by either Rate Control or Priorit y . Y ou can also configure QoS T rust Mo de and the DSCP sett ing s. Q oS > B andwidth Management Q oS > B a ndwi dth M ...

  • Cisco RVS4000 - page 68

    Set ting Up and Configuring the Router QoS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 68 5 Ba nd wi d th This section lets you spe cify the maximum b andwidth provided by the ISP on the W AN interface, for both the upstream and downstr eam directions . B andwidth Management Type Type The de sired type of b andwidth management , e ...

  • Cisco RVS4000 - page 69

    Set ting Up and Configuring the Router QoS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 69 5 Priorit y QoS > Ban dwi dth Ma na ge men t - P rio ri t y Servi ce Select the s er vice from the dr op- down menu. If it does not c ontain the ser vice you nee d, click Se r vi ce M an a g em en t t o add the ser vice. Direc tion Sel ect ...

  • Cisco RVS4000 - page 70

    Set ting Up and Configuring the Router QoS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 70 5 Qo S > Qo S Se tu p Use the QoS Set up window to configure QoS T rust Mo de f or each LAN por t . QoS > QoS Set up Por t ID The number of the L AN por t . Tr u st M o d e Select either Por t , CoS , or DS CP . The default is Por t . D ...

  • Cisco RVS4000 - page 71

    Set ting Up and Configuring the Router QoS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 71 5 Q oS > DSCP S etup QoS > DS CP S etup DSCP The Dif f erentiat e d Ser vice s Code Point value in the incoming packet . Queue Sele ct the traffic f or warding queue, 1 to 4 , to which the DS CP priority is mapped. Queue 4 has the highe ...

  • Cisco RVS4000 - page 72

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 72 5 Administra tion Use the Administration men u t o c onfigure the syst em administration set tings and to o ls . Administration > Management Admin istra tion > Ma nagem ent Router Ac c es s Router Userlist S elect the desire ...

  • Cisco RVS4000 - page 73

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 73 5 System Con t act Ent er contact information f or the syst em. System L oc a tion Enter the location of the system. Read C ommunit y Enter the SNMP c ommunity name f or SNMP “Get ” commands . Write Commun it y Ent er the S NM ...

  • Cisco RVS4000 - page 74

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 74 5 Admini stra tion > Log Administration > Log Log S et ting Lo g Level S elect the log level(s ) that the rout er shoul d r ecord. L og levels and their meanings are: Lo g Levels Level Se ve ri t y Na me Descr ip t io n 7 L ...

  • Cisco RVS4000 - page 75

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 75 5 Outgoing Lo g Select Enable to cause all outgoing pack ets to be logge d. Y ou can then click View Outgoing T able to displa y inf ormation on the outgoing pack ets including Source IP , Destination IP , and Ser vic e/P or t num ...

  • Cisco RVS4000 - page 76

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 76 5 Email Lo g Now Pr e ss this but ton t o cause the lo g t o be emailed imme diat ely . Sys log Enable Syslo g Check the b o x if you want t o us e this f eature. Syslog Ser ver Ent er the IP Address in this field when Enable Sysl ...

  • Cisco RVS4000 - page 77

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 77 5 Ping T e st Parameters Ping T arget IP Ent er the IP addres s or URL that y ou want t o ping. Ping Size Enter the size of the pack et you want t o use. Numb er of Pings Ent er the numb er of times you wi sh to ping the target de ...

  • Cisco RVS4000 - page 78

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 78 5 Administration > Backup & Re stor e Administration > Backup & Rest ore T o download a copy of the curr ent configuration and sto re the file on your PC, click Ba c k up to star t the download. Restore C onfigura ti ...

  • Cisco RVS4000 - page 79

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 79 5 Administration > F ac tor y D efault Administration > F ac tor y De fault Restore F actor y D efaults Click this button t o reset all configuration set tings t o their fact or y default values. Any previously sa ved set ti ...

  • Cisco RVS4000 - page 80

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 80 5 Adminis tra tion > R ebo ot Administration > Rebo ot Rebo ot Click this but t on t o reboot the rout er . This operation doe s not cause the r outer t o lo se an y of its st or ed se ttings. Administration > F irmware U ...

  • Cisco RVS4000 - page 81

    Set ting Up and Configuring the Router Administr ation Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 81 5 STEP 1 Check the hardwar e version of the rout er by ref erring to the label on the bot tom panel. The PID VID number include s the charact ers V01 ( V ersion 1 ) or V02 (V e r si o n 2 ). STEP 2 T o find the latest firmware f o ...

  • Cisco RVS4000 - page 82

    Set ting Up and Configuring the Router IPS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 82 5 IPS IPS > C onfigura tion IPS > Configuration IPS Function Sel ect Enable to enable or Disable t o dis able the IPS Function. Anomaly D etec tion HT TP W eb attack signature is mat ched. HT TP r eque st deco der deco des UTF-8 ( 1 , 2 ...

  • Cisco RVS4000 - page 83

    Set ting Up and Configuring the Router IPS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 83 5 IPS > P2P /IM Peer T o Peer Pe er to Peer Peer -t o-peer file sharing applications can be blo ck ed ( Block ) or allowed ( Non- Blo ck ). The preconfigured file sharing networks ar e GNUTELLA (EZPEER) , F ASTTR ACK , KURO, EDONKE Y2000 , ...

  • Cisco RVS4000 - page 84

    Set ting Up and Configuring the Router IPS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 84 5 IPS > Rep or t Provides a graphical r epresentation of the level of net work traffic and at tacks during the last twent y f our hours . At t a c ker Displays the IP Address of at tackers and the fr e quency (number of times ) of the atta ...

  • Cisco RVS4000 - page 85

    Set ting Up and Configuring the Router IPS Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 85 5 IPS > Repor t ...

  • Cisco RVS4000 - page 86

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 86 5 IPS > Informa tion IPS > Information Signature V ers ion Displa ys the version of the signatur e pat t erns in the r oute r that pr otects against malicious threats. Las t Ti me U ploa d This displays when the signatur e pat t ...

  • Cisco RVS4000 - page 87

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 87 5 VLANs function at layer 2. Since VLANs is olate tra f fic within the VLAN, a Layer 3 r outer is needed to allow traffic flow bet ween VL ANs. Lay er 3 rout ers identif y segments and c oordinat e with VL ANs . VLANs are broadcast an ...

  • Cisco RVS4000 - page 88

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 88 5 L2 Switch > VL AN Por t S et ting L2 Switch > VL AN Por t S et ting Por t ID Displa ys the por t number from 1 to 4 . Mode Sele ct the mode of the po rt , either Tr u n k , Untagged , or T agge d . The default is Untagged . In ...

  • Cisco RVS4000 - page 89

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 89 5 L2 Switch > VL AN Membership L2 Switch > VL AN Memb ership VL AN ID Sele ct the VLAN whos e membership you want t o c onfigur e. Descr ipt ion Enter a VLAN group name of up t o 50 characters. Fu nction/Por t table The top half ...

  • Cisco RVS4000 - page 90

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 90 5 L2 Switch > R ADIUS L2 Switch > R ADIUS Mode Select Enable d or Dis abled from the dr op- down menu to enable or disable RA D I U S. RA D I US I P Enter the Ser ver IP addr e ss . R ADIUS UDP Port Enter the UDP port . The UDP ...

  • Cisco RVS4000 - page 91

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 91 5 L2 Switch > Por t S et ting L2 Switch > Por t S et ting Por t Displa ys the physical por t number . Link Displays the por t duplex mode and spe ed. Ful l D up l ex indicat e s that the interface supp orts transmis sion bet wee ...

  • Cisco RVS4000 - page 92

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 92 5 L2 Switch > St a tistic s L2 Switch > St a tistic s Statistics O ver view Tx By te s Displa ys the number of By tes transmit ted fr om the sele ct ed por t . Tx Frames Display s the number of Frame s transmitted fr om the sele ...

  • Cisco RVS4000 - page 93

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 93 5 L2 Switch > Por t Mirroring L2 Switch > Por t Mirroring Mirror So urce Use this t o enable or disable source por t mirr oring f or each por t on the r outer . T o enable source por t mirr oring on a por t , check the box ne xt ...

  • Cisco RVS4000 - page 94

    Set ting Up and Configuring the Router L2 S wi tch Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 94 5 L2 Switch > R STP L2 Switch > R STP The RS TP (Rapid Spanning T ree Pr otocol) prot oc ol pr events loops in the network and dynamically reconfigures which physical links in a swit ch should f o rward frames . System Pri orit ...

  • Cisco RVS4000 - page 95

    Set ting Up and Configuring the Router Sta tus Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 95 5 Path Co st The RSTP path cost f or the designated por ts . Ent er a number from 1 to 200000000 , or typ e the wor d auto (autogenerated path cost) . The default is aut o. The default is auto . Status Status > Gatewa y Status > Ga ...

  • Cisco RVS4000 - page 96

    Set ting Up and Configuring the Router Sta tus Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 96 5 DNS 1 -2 Displa ys the DNS (Domain Name Syst em) IP addr es ses currently used by this Gat e wa y . IP Conntrack Click th is button t o display the IP Conn track window . IP C onntrack The IP Conn t rack (Connection T ra cking) window d ...

  • Cisco RVS4000 - page 97

    Set ting Up and Configuring the Router Sta tus Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 97 5 Status > Lo c al Net wo rk Status > Loc al Net work Current IP addres s System This shows the current syst em. MA C Addres s The r outer MAC Addr e ss , as seen on your local, Ethernet net work . IP Addres s The Int ernet IP Addr ...

  • Cisco RVS4000 - page 98

    6 Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 98 Using the VPN S etup Wizard This chapter explains how t o us e the VPN Setup W izard. It includes these se ctions: • VPN S etup Wizar d, page 98 • Be f or e Y o u Be gi n, pa g e 98 • Running the VPN Setup Wizard, p age 99 VPN S etup Wizar d Now you can configure a gat eway-to ...

  • Cisco RVS4000 - page 99

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Administrat or Guide 99 6 STEP 1 Click Fire wall > B asic S ettings . STEP 2 Enable R emote Management and ent er 80 80 in the P or t field. Please note that you cannot enter an y other value if you want to use the VPN Wizar d. Also, make sure t ...

  • Cisco RVS4000 - page 100

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 100 6 Welcome Window ...

  • Cisco RVS4000 - page 101

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 101 6 STEP 4 Read the inf ormation about the wizar d, and then click Next to pro c ee d . Informational Window ...

  • Cisco RVS4000 - page 102

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 102 6 STEP 5 Choose one metho d t o build the VPN c onnection: • If your PC is local to one of the two r outers, choos e Build VPN connec tion from Loc al L AN p ort of one router , click Next , and continue wi th these inst ...

  • Cisco RVS4000 - page 103

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 103 6 STEP 6 Enter the r e quir e d data in the Configure VPN T unnel window and click Nex t to continue. Configure VPN Tunnel • Router 1 User Name : Ent er the user name of the Rout er 1 . • Router 1 Pas sword : Ent er th ...

  • Cisco RVS4000 - page 104

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 104 6 The rout er configuration is checked. Check Router Configuration ...

  • Cisco RVS4000 - page 105

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 105 6 STEP 7 When the Summar y window appears , use the Click button t o view the VPNC Summar y window . Summar y Window STEP 8 R evi ew t he setti ngs, as needed. Clic k Clos e when you ar e ready t o continue. VPNC Summar y ...

  • Cisco RVS4000 - page 106

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 106 6 STEP 9 In the Summary window , if all your entries appear corr e ct , click Go . Other wis e click Ba c k t o go back and make an y c orrections. Configure the Router STEP 10 Click Te s t i n g to make sur e the c onnect ...

  • Cisco RVS4000 - page 107

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 107 6 T est the Conne ction STEP 11 When t esting is done, click Exit to e nd th e Wi za rd . ...

  • Cisco RVS4000 - page 108

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 108 6 Exit the Wizard Congratulations! Se tup is now complete. Y ou may now log int o the W eb Ad mi ni st ra tor In ter fa c e a nd se e th e re s ult s . T e st Results ...

  • Cisco RVS4000 - page 109

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 109 6 Building Y our VPN C onne ction Remotely This pr oc edure continues from Step 5 on page 102 . Us e this pr o cedure to build your VPN connection from a remot e P C. STEP 1 Ch oose Build VPN conne ction from Internet r e ...

  • Cisco RVS4000 - page 110

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 110 6 Configure VPN Tunnel Window • Router 1 User Name : Ent er the user name of the Rout er 1 . • Router 1 Pas sword : Ent er the password of the Rout er 1 . • Router 2 User Name : Ent er the user name of the Rout er 2. ...

  • Cisco RVS4000 - page 111

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 111 6 STEP 3 The r outer configuration is checked. Check Router Configuration STEP 4 The Summar y window appears. Us e the Click box t o view the VPNC Summar y window . ...

  • Cisco RVS4000 - page 112

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 112 6 Summar y Window STEP 5 The VPNC Summar y window appears showing the s ettings that were made to industr y standards. Click Clos e when y ou are r eady to continue. VPNC Summar y Window STEP 6 In the Summary window , if a ...

  • Cisco RVS4000 - page 113

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 113 6 Configure the Router STEP 7 Click Te s t i n g to make sur e the conne ction is succe ssfully e stablished. ...

  • Cisco RVS4000 - page 114

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 114 6 T est the Conne ction STEP 8 When t e sting is done, click Exit to e nd t he Wiz ard . ...

  • Cisco RVS4000 - page 115

    Using the VPN S etup Wiz ard Running the VP N Setup W izar d Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 115 6 Congratulations! Se tup is now complete. Y ou may now log int o the W eb Ad mi ni st ra tor In ter fa c e a nd se e th e re s ult s . View T e st Result s ...

  • Cisco RVS4000 - page 116

    A Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 116 T rouble sho oting This appendix provides solutions to pr oblems that may occur during the installation and operation of the rout er . Re ad the descriptions below to help solve your pr oblems. If you can’t find an answer here, check the Cisco web sit e at www . ci sco . co m . ...

  • Cisco RVS4000 - page 117

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 117 A STEP 8 Click OK in the Internet Protocol ( TCP /IP) Proper t ies window , and click OK in the L ocal Area Connect ion Proper t ies window . STEP 9 Restar t the computer if asked. Windows XP STEP 1 Click Star t and Con tr ol Pa ne l . STEP 2 Click the Net work and ...

  • Cisco RVS4000 - page 118

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 118 A I want to test my Internet conne c tion. STEP 1 Check your T CP / IP set tings. Windows 2000 a. Click Star t , Setti ngs , and Co nt r ol P an e l . Double-click Net work and Dial-Up Co nnec tions . b. Right -click the Lo cal Are a Conne ction that is as sociated ...

  • Cisco RVS4000 - page 119

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 119 A STEP 3 At the command prompt, t ype ping 192. 168. 1 . 1 and press Enter . • If you get a r eply , the co mput er is c ommunicating with the rout er . • If you do NO T get a reply , check the cable, and make sur e Obt ain an IP address automatically is sele c ...

  • Cisco RVS4000 - page 120

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 120 A STEP 5 Make sure the cable conne cting fr om your cable or DS L modem is c onnected t o the r outer ’ s Internet por t . V erify that the Status page of the rout er ’ s c onfiguration utility shows a valid IP addres s fr om your ISP . STEP 6 T urn of f the co ...

  • Cisco RVS4000 - page 121

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 121 A assigne d a static IP addr e ss to any computer or network devic e on the network , you need to change its IP address ac cor dingly to 19 2. 168.2. Y ( Y re pre s e n ts a ny number from 1 t o 254) . Not e that each IP addres s must be unique within the network . ...

  • Cisco RVS4000 - page 122

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 122 A STEP 4 Configure as man y entries as you lik e . STEP 5 When you hav e completed the configuration, click Sav e . I ne ed to s et up online game hostin g or use other Internet applic ations. If you want t o play online games or us e Internet applications, mo st w ...

  • Cisco RVS4000 - page 123

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 123 A I c an ’t get an Internet game, s er ver , or application to work. If you ha ve dif ficulties getting any Int ernet game, ser ver , or application to function pr operly , c onsider e xpo sing one PC to th e Internet by using DeMilitarized Z one (DMZ) hosting. T ...

  • Cisco RVS4000 - page 124

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 124 A STEP 6 Click Sav e . I am a PPPoE us er and I nee d to remo ve the proxy s et tings or the dial- up po p-up window . If you ha ve pro x y set tings, you need t o dis able these on your co mput er . B ecause the r outer is the gat eway f or the Int ernet connectio ...

  • Cisco RVS4000 - page 125

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 125 A STEP 4 In the Se ar ch Results, click the Downlo ad Sof t ware link f o r your r outer (usually the first link) . STEP 5 Click the Router Firmwar e Res cue Utilit y link . STEP 6 Click the link for the lat est release. STEP 7 Click the Down load Now button. STEP ...

  • Cisco RVS4000 - page 126

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 126 A I c an ’t ac c es s my email, web, or VPN, or I am get ting c orrupte d data from the In ternet . Y ou may need to adjust the Maximum T ransmis sion Unit (MTU) sett ing. By default , the MTU is set at 1500. F or most DS L users , it is strongly r ec ommended to ...

  • Cisco RVS4000 - page 127

    T rouble shooting Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 127 A STEP 6 Enter the Start and End Ports of the Forw ar ded Range. Check with your Int ernet application provider f or more inf ormatio n on which incoming por t ser vic es ar e r equired by the Internet application. STEP 7 Che ck the Enabled box f or t he ent r y . ...

  • Cisco RVS4000 - page 128

    T rouble shooting F requently Asked Questions Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 128 A STEP 3 Click To o l s . Click Internet Options . Click the Secu ri t y tab. Click the Defa ult lev el button. Mak e sure the security level is Medium or lower . Then click the OK button. I ha ve QuickVPN tunnel c onnec ted to my R VS 4 ...

  • Cisco RVS4000 - page 129

    T rouble shooting F requently Asked Questions Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 129 A What is Network Address Translat ion and what is it used for? Netw ork Address T ranslati on (NA T ) translates multiple IP addr e s ses on the priv at e LAN to one public addr es s that is sent out to the Int ernet . This adds a level ...

  • Cisco RVS4000 - page 130

    T rouble shooting F requently Asked Questions Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 130 A far as hosting games , the HL ser ver does not ne ed to be in the DMZ. Just f or war d por t 27015 t o the local IP addres s of the ser ver comput er . How can I block corrupted FTP downloads? If you e xp erience corrupted files when y ...

  • Cisco RVS4000 - page 131

    T rouble shooting F requently Asked Questions Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 131 A using the configuration utilit y (see Administration > F irmware Upgrade, pag e 80 ) . If the rout er ’ s Internet connection is working well, there is no need to download a newer firmwar e version, unles s that version contains n ...

  • Cisco RVS4000 - page 132

    T rouble shooting F requently Asked Questions Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 132 A Does the router replace a modem? Is there a cable or DSL modem in the router? No, this v ersion of the r outer must work in c onjunction with a cable or DS L modem. Which modems are compatible with the router? The rout er is compatible ...

  • Cisco RVS4000 - page 133

    B Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 133 Using Cis c o QuickVPN for Windows 2000, XP , or Vist a O ver view This appendix explains how t o install and use the Cisco QuickVPN s oft war e that can be download ed fr om www . ci sc o . co m . QuickVPN works with computers running Windows 2000 , XP , V ista, or Windows 7 . (C ...

  • Cisco RVS4000 - page 134

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Be fo r e Y ou B egi n Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 134 B STEP 4 Click Add/ S a ve . STEP 5 Che ck the Acti ve box f or VPN Client No. 1 . STEP 6 Click Sav e . VPN Client Acc ounts Window ...

  • Cisco RVS4000 - page 135

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Ins talling the Cis co QuickVPN Soft war e Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 135 B Installing the Cis c o QuickVPN S of t ware Y ou can install the sof tware by using one of the f ollowing methods: • Installing from the CD-R OM, page 135 • Downlo ading and Instal ...

  • Cisco RVS4000 - page 136

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Ins talling the Cis co QuickVPN Soft war e Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 136 B C opying Files Finished Inst alling Files STEP 3 Click Fi ni s he d to complet e the installation. Proceed to “Using the Cisc o Q ui ck VP N So ft w ar e, ” on pa g e 13 7 . ...

  • Cisco RVS4000 - page 137

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Using the Cisc o QuickVPN Soft war e Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 137 B D ownloading and Inst alling fr om the Internet STEP 1 Go to firm ware downlo ad link in Appendix G, “ Wher e to Go Fr om Here.” STEP 2 From the firmwar e download link , click D ownload ...

  • Cisco RVS4000 - page 138

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Using the Cisc o QuickVPN Soft war e Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 138 B The QuickVPN L o gin window appears . STEP 2 Enter the f ollowing inf ormation: • Profile Name : Enter a name f or your pr ofile. • Us er Name and Pas sword: Enter the user name and pass ...

  • Cisco RVS4000 - page 139

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Using the Cisc o QuickVPN Soft war e Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 139 B QuickVPN Status T o te rminate the VPN tunnel, click Dis conne ct . T o change your password, click Change Password . For inf ormation, click Help . STEP 6 If you click ed Change Password an ...

  • Cisco RVS4000 - page 140

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Distributing Cer tifica tes to QuickVPN Users Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 140 B Conne ct Vir tual Private C onnec tion NOTE Y o u can change your password only if you ha ve b een granted that privile ge by your syst em administrator . Distributing C er tific at ...

  • Cisco RVS4000 - page 141

    Using Cisc o QuickVPN for Windows 2000, XP , or Vista Distributing Cer tifica tes to QuickVPN Users Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 141 B STEP 3 Each QuickVPN us er must then install the cer tificate as f ollows : a. Sav e the cer tificate int o the director y wher e the QuickVPN Client is installed. Fo r ex a m p l e ...

  • Cisco RVS4000 - page 142

    C Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 142 C onfiguring IPS e c with a Windows 2000 or XP C omputer This appendix explains how t o configur e IPSe c with a computer that is using Windows 200 0 or Windows XP . R ef er to these topics: • Introduction, p age 142 • Enviro nment, p age 143 • How to Establish a S ecure IPS ...

  • Cisco RVS4000 - page 143

    Configuring IPS ec with a Windows 2000 or XP C omputer Env iro nm en t Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 143 C Envir o nmen t The IP addr es ses and other spe cifics mentioned in this appendix ar e f or illustration purpo ses only . Windows 2000 or Windows XP IP Address : 140 . 111 . 1 .2 <= User ISP provides IP Addr ...

  • Cisco RVS4000 - page 144

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 144 C Establishing a S e cure IPS ec T unnel STEP 1 Creat e an IPSec p olicy . a. Click Star t , sele ct Run , and t ype secpo l. msc in the Open field. The Lo c a l Sec ur ity Se t t ...

  • Cisco RVS4000 - page 145

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 145 C F ilter List 1 : win -> router a. In the new policy ’ s proper ties window , verify that the Rules tab is s elected. Uncheck the Us e Add Wizard bo x , an d clic k Add to c ...

  • Cisco RVS4000 - page 146

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 146 C IP Filter L ist T ab c. The IP F i lter List window should appear . Enter an appr opriate name, such as win-> Rout er , f or the filter list , and uncheck the Use Add Wizard ...

  • Cisco RVS4000 - page 147

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 147 C d. The F ilter s Proper ties window will appear . S elect the Addr e ssing tab. Filters Pr oper tie s In the Sou rce add ress field, select My IP Addre ss . In the Destination a ...

  • Cisco RVS4000 - page 148

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 148 C F ilter List 2: router -> win g. The Ne w Rule Proper ties window will appear . Select the IP F i lter List tab, and make sur e that win -> Router is highlighted. Then, cl ...

  • Cisco RVS4000 - page 149

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 149 C i. The Filters Proper ties window will appear . S elect the Addr e ssing tab. In the Sou rce add ress field, s elect A sp ecific IP Subnet , and enter the IP Address 192. 168. 1 ...

  • Cisco RVS4000 - page 150

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 150 C The N ew Rule Proper ties window appears with the IP Filter List tab selected. The window will contain listings f or Router ->win an d win->Router . New Rule Proper tie s ...

  • Cisco RVS4000 - page 151

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 151 C T unnel 1 : win->Router a. On the IP Fi lter List tab, sele ct filt er list win->Router . IP Filter L ist T ab b. Click the Fil te r A c ti o n tab, and click the filter a ...

  • Cisco RVS4000 - page 152

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 152 C Filter Action T ab c. On the Secu ri t y Me th od s tab, v erif y that the Ne gotia te se curit y option is enabled, and uncheck the Accep t un secur ed co mm uni cat ion , bu t ...

  • Cisco RVS4000 - page 153

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 153 C Se curit y Metho ds T ab d. Select the Authentication Methods tab, and click Edit . ...

  • Cisco RVS4000 - page 154

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 154 C Authentication Methods T ab e. Change the authent ication method to Us e this string to protect the key exchange (pr eshared key) , and ent er the pr e shar e d k ey string, suc ...

  • Cisco RVS4000 - page 155

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 155 C f . This new Pr e shared k ey will be displayed. Click the Apply bu t ton to c on t in ue , if it appears on your scr een; other wise, proceed to the ne xt step. New Preshare d ...

  • Cisco RVS4000 - page 156

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 156 C h. S elect the Conn ectio n T ype tab, and click All net work c onnec tions . Then, click the OK or Clo se button t o finish this r ule. Conne ct ion Type T ab T unnel 2: Router ...

  • Cisco RVS4000 - page 157

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 157 C Proper ties Window j. Go to the IP Filter List tab, and click the filter list Router ->win . IP Filter L ist T ab k. C li c k t he Fi l te r A c ti o n tab, and s elect the f ...

  • Cisco RVS4000 - page 158

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 158 C always resp ond using IPS e c bo x . Se lect Sess ion k ey Pe rfect Fo rwa rd Secr ecy , and click OK . Filter Action T ab l. Click the Authentication Methods tab, and verify th ...

  • Cisco RVS4000 - page 159

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 159 C m. Change the authentication method to Use this string to protec t the k ey exchange (pr eshared key) , and ent er the pr e shar e d k ey string, such as XYZ 12345. ( This is a ...

  • Cisco RVS4000 - page 160

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 160 C New Preshare d K ey o. Cli ck the T unnel S et ting tab. Click the radio button The tunnel endpoint is sp ecifie d by this IP Addre ss , and enter the W indows 2000/ XP c omput ...

  • Cisco RVS4000 - page 161

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 161 C p. Click the Conne c tion Type tab, and sele ct All net work conne ctions . Then click OK or Clo se to fi ni sh . Conne ct ion Type T ab q. On the Rules tab, click the OK or Clo ...

  • Cisco RVS4000 - page 162

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 162 C Rule s T ab STEP 4 A ssign new IPS ec policy . In the IP Se curit y Policies on L ocal M achine window , right- click the policy named to_Router , and click Assi gn . A gr een a ...

  • Cisco RVS4000 - page 163

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 163 C STEP 5 Creat e a tunnel through the configuration utility . a. Open your web br owser , and enter 192. 168. 1 . 1 in the Addres s field. Pres s Enter . b. When the Us e r na m e ...

  • Cisco RVS4000 - page 164

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 164 C VPN > IPS ec VPN d. Sele ct the tunnel y ou wish to creat e in the S elect T unnel Entr y drop-down box. Then click Enable . Enter the name of the tunnel in the T unnel Name ...

  • Cisco RVS4000 - page 165

    Configuring IPS ec with a Windows 2000 or XP C omputer Ho w t o E st abl ish a Secu r e IP Sec T unn el Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 165 C e. Enter the IP Addr es s and Subnet Mask of the local VPN r out er in the Lo c a l Gro u p S e t up fields. T o allow ac ces s t o the entir e IP subnet , ent er 0 fo r t h e l ...

  • Cisco RVS4000 - page 166

    D Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 166 Ga tewa y-to- Ga tewa y VPN T unnel O ver view This appendix explains how t o c onfigur e an IPSec VPN tunnel b etween t wo VPN r outers by e xamp le. T wo computers ar e use d t o t est the livelines s of the tunnel. These s ections are included: • Be f or e Y o u Be gi n, pa g ...

  • Cisco RVS4000 - page 167

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the Remo te Gat eway Use s a Sta tic IP Address Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 167 D C onfigura tion when the Remote Gatewa y Us e s a Static IP Add res s This e xample assumes the Remote G a t eway is using a static IP address . If the Remot e Gatewa y us es a dyn ...

  • Cisco RVS4000 - page 168

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the Remo te Gat eway Use s a Sta tic IP Address Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 168 D F or the Local Securit y Group T yp e, select Subnet . Ent er the RVS4000’ s local ne two rk s etti ng s i n t he IP Addres s and Subnet Mask fields . R VS 4000 IPSe c VPN Set ti ...

  • Cisco RVS4000 - page 169

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the Remo te Gat eway Use s a Sta tic IP Address Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 169 D R VS 4000 IPSe c Setup S et tings k . If you need more detailed set tings , click Ad vanced Settings . Other wise, click Sa ve and pr o ceed to the next st ep to configur e the RV0 ...

  • Cisco RVS4000 - page 170

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the Remo te Gat eway Use s a Sta tic IP Address Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 170 D R V082 VPN Set tings h. For the Remot e Se curity Gatewa y T yp e, select IP address . Enter the RVS4000’ s W A N IP addr e ss in the IP Addres s field. i. F or the Remote Securi ...

  • Cisco RVS4000 - page 171

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the Remo te Gat eway Use s a Sta tic IP Address Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 171 D R V082 IPSe c S etup Set tings 1 . If you nee d mor e detailed set tings , click Adva nce d Settings . Other wise, click Sa ve . STEP 3 Configuration of P C 1 and PC 2. V erify tha ...

  • Cisco RVS4000 - page 172

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the R emote Ga tewa y Us es a D ynamic IP Addr e ss Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 172 D C onfigura tion when the Remote Gatewa y Us e s a D ynamic IP Add res s This ex ample assum es the Remot e Gatewa y is using a dynamic IP ad dr e ss . If the Remot e Gatewa y u ...

  • Cisco RVS4000 - page 173

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the R emote Ga tewa y Us es a D ynamic IP Addr e ss Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 173 D F or the Local Securit y Group T yp e, select Subnet . Ent er the RVS4000’ s local ne two rk s etti ng s i n t he IP Addres s and Subnet Mask fields . R VS 4000 IPSe c VPN Se ...

  • Cisco RVS4000 - page 174

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the R emote Ga tewa y Us es a D ynamic IP Addr e ss Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 174 D R VS 4000 IPSe c Setup S et tings k . If you need more detailed set tings , click Ad vanced Settings . Other wise, click Sa ve and proceed to the next st ep, “Configuration o ...

  • Cisco RVS4000 - page 175

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the R emote Ga tewa y Us es a D ynamic IP Addr e ss Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 175 D R V082 VPN Set tings h. For the Remot e Se curity Gatewa y T yp e, select IP address . Enter the RVS4000’ s W A N IP addr e ss in the IP Addres s field. i. F or the Remote Se ...

  • Cisco RVS4000 - page 176

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation when the R emote Ga tewa y Us es a D ynamic IP Addr e ss Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 176 D R V082 IPSe c S etup Set tings l. If you need more detailed set tings , click Adv anced Settings . Other wis e, click Sa ve . STEP 3 Configuration of P C 1 and PC 2. V erify th ...

  • Cisco RVS4000 - page 177

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation W hen Both Ga tewa ys Use D ynamic IP Addr ess es Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 177 D C onfigura tion When B oth Ga tewa ys Us e D yn amic IP Ad d r esses This ex ample as sumes both Gatewa ys are using dynamic IP addr es ses . If only the Remot e Gatewa y us es a dyna ...

  • Cisco RVS4000 - page 178

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation W hen Both Ga tewa ys Use D ynamic IP Addr ess es Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 178 D F or the Local Securit y Group T yp e, select Subnet . Ent er the RVS4000’ s local ne two rk s etti ng s i n t he IP Addres s and Subnet Mask fields . R VS 4000 IPSe c VPN Set tings ...

  • Cisco RVS4000 - page 179

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation W hen Both Ga tewa ys Use D ynamic IP Addr ess es Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 179 D R VS 4000 IPSe c Setup S et tings k . If you need more detailed set tings , click Ad vanced Settings . Other wise, click Sa ve and proceed to the next st ep, “Configuration of the R ...

  • Cisco RVS4000 - page 180

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation W hen Both Ga tewa ys Use D ynamic IP Addr ess es Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 180 D R V082 VPN Set tings h. For the Remot e Se curity Gatewa y T ype, s elect IP by DNS Re solve d . Enter the RVS4000’ s domain name in the field provided. i. F or the Remote Securit y ...

  • Cisco RVS4000 - page 181

    Gatewa y-to- Gatewa y VPN Tunnel Configur ation W hen Both Ga tewa ys Use D ynamic IP Addr ess es Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 181 D R V082 IPSe c S etup Set tings l. If you need more detailed set tings , click Adv anced Settings . Other wis e, click Sa ve . STEP 3 Configuration of P C 1 and PC 2. V erify that P C ...

  • Cisco RVS4000 - page 182

    E Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 182 Cis c o Prote c tLink W eb S er vic e O ver view The optional Cisco Pr otectLink W eb s er vice provides se curity f o r your network . It filt ers website addr e ss es (URLs), and blocks potentially malicious websites. Prot e ctLink is a vailable for online pur chas e thr ough on ...

  • Cisco RVS4000 - page 183

    Cisc o Protec tLink W eb S er vic e How to Pur chas e, R egister , or Acti va te the Ser vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 183 E Lo gin Window How to Purchase, Re gister , or A ctivate the Ser vic e Y ou can purchase, regist er , or activate the ser vic e using the ProtectLin k window . Protec tLink Click the Prote ...

  • Cisco RVS4000 - page 184

    Cisc o Protec tLink W eb S er vic e How to Pur chas e, R egister , or Acti va te the Ser vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 184 E Prote ctLink (Inac tive) F ollow the instructions f or the appropriat e option: • L earm more about and request Free T rial f or Cis co Pr otectLink . • Regist er Pr otectLink ser vic ...

  • Cisco RVS4000 - page 185

    Cisc o Protec tLink W eb S er vic e How to Use the S er vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 185 E After you activa te Pr otectLink , this window appears when you click Protec tLink > Prote ctLink Purchas e fr om the menu. Prote ctLink (Ac tive) How to Us e the S er vic e Configure the ser vice to pr otect your net ...

  • Cisco RVS4000 - page 186

    Cisc o Protec tLink W eb S er vic e How to Use the S er vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 186 E Prote ctLink > Web Protection ...

  • Cisco RVS4000 - page 187

    Cisc o Protec tLink W eb S er vic e How to Use the S er vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 187 E We b Protection Enable URL Filterin g T o filter we bsite addr es ses (URLs), sele ct this option. Enable Web Reputation T o block potentially malicious websites, s elect this option. URL F iltering Res et Co un ter The ...

  • Cisco RVS4000 - page 188

    Cisc o Protec tLink W eb S er vic e How to Use the S er vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 188 E Approved URLs Y ou can de signate up t o 20 trusted URLs that will always be acce ssible. Enable Approved URL list T o set up a list of alwa ys acces sible URLs, s elect this option. URL(s) to appr ove Ent er the trusted ...

  • Cisco RVS4000 - page 189

    Cisc o Protec tLink W eb S er vic e How to Use the S er vice Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 189 E Protec tLink > Lic ense The license f or the Cisc o Pr otectLink W eb ser vic eis valid f or one year fr om the time the activa tion code is generated. On the Licens e window , lic ense inf ormation is displayed. Use ...

  • Cisco RVS4000 - page 190

    F Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 190 Sp e cific a tions The Cisco RVS4000 4-P or t Gigabit Security Rout er with VPN specifications ar e des cribed in this app endix. Sp ecific a tions Per formanc e Set up / Co n f i g Model RVS4000 Standards IEEE802.3, 802.3u, 802. 1X, RFC791 (IP Pr otocol) , RFC2460 , IP v 4 (RFC 7 ...

  • Cisco RVS4000 - page 191

    Spe cifications Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 191 F Management Secu ri t y F ea tu r es Qo S SNMP V ersion SNM P v er si on 1 , 2 c Event Logging L ocal, Syslog , Email Alerts Fir mw a re Up gr ad e Firm ware a vailable through web br owser Diagno stics Flash, R AM Access Con tr ol Acce ss Control List (ACL ) Capabi ...

  • Cisco RVS4000 - page 192

    Spe cifications Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 192 F Net work VPN Routing La ye r 2 DHCP DHCP Ser ver , DHCP Client , DHCP Relay Agent DNS DNS Rela y , D ynamic DNS (DynDNS, T Z O) NA T PAT , N A P T DMZ Soft ware configurable on any LAN por t configuration, DHCP v6, ICMP v6 IP v 6 Dual Stack IP v 4 and IPv6, 6to4, S ...

  • Cisco RVS4000 - page 193

    Spe cifications Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 193 F Envir onmental Specifications are subject to change without notice. Por t Mirroring One of the five W AN /LAN ports can be mirrored to a selected LAN por t RSTP Suppor ts Rapid Spanning Tr ee Pr otocol for loop detection and faster reconfiguration Dimensions 6.69 i ...

  • Cisco RVS4000 - page 194

    G Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 194 Wher e to Go F rom Her e Cisco provides a wide range of r esources to help you and y our cust omer obtain the full benefits of the Cisc o RV S4000 4-Port Gigabit Se curity Router with VPN. Produc t Re s ource s Suppor t Cisco Small Busine ss Suppor t Communit y w w w .cisco.c om/ ...

  • Cisco RVS4000 - page 195

    Where to Go F rom Her e Rel ate d D o c um en tati o n Cisco RVS4000 Securit y Rout er with VPN Admini strat or Guide 195 G Rela te d D o cumen tation F or hardwar e s etup f or the Cisc o RVS4000 r outer , se e the Cisco Small Busine ss Model RVS4000 4-P or t Gigabit Securit y Rout er with VPN Quick Star t Guide . F or c ompliance and saf ety info ...

メーカー Cisco カテゴリー Router

Cisco RVS4000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RVS4000の取扱説明書
- Ciscoの製品カード
- パンフレット
- またはCisco RVS4000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco RVS4000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco RVS4000の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco RVS4000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco RVS4000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco RVS4000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco RVS4000を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco RVS4000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Ciscoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco RVS4000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco RVS4000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco RVS4000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco RVS4000デバイスの基本機能を使うにあたってのヒント。 Cisco RVS4000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco RVS4000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco RVS4000のメーカー/サービスへの連絡先に関する情報。

Cisco RVS4000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco RVS4000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco RVS4000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)