-
Bunn B10 Series - page 1
INST ALLA TION AND OPERA TING MANUAL BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 www .bunnomatic.com BRW BrewWISE ® Recipe Writer BUNN ® 34446.0000C 07/04 ©2002 Bunn-O-Matic Corporation DISCONNECT FROM POWER SO URCE BEFORE REMOVAL OF ANY PANEL OR REPLACEMENT OF ANY CO ...
-
Bunn B10 Series - page 2
2 34446 070804 Will coffee be ground in a BrewWISE ® grinder? Is funnel to be used for one coffee only? Brewer will use No-Name settings Select "Dedicated Funnel" function BrewWISE ® brewer model? Select "No-Name Left" function Select "No-Name Left" function Select "No-Name Right" function Which side will b ...
-
Bunn B10 Series - page 3
3 System Requirements • PC with 486DX/66MHz or higher processor; Pentium or higher processor recommended. • Microsoft ® Windows 95, 98, 2000, NT ® , or XP operating systems. • VGA or higher resolution monitor; Super VGA recommended. •A functional, available RS-232 serial port set up as Com1-Com4 or a USB to Serial adapter Cable (Bunn-O-Ma ...
-
Bunn B10 Series - page 4
4 • After all the necessary files are copied, the installation program displays a Welcome screen that allows the user to continue with installation or exit the setup program. If any Windows applications are running, it is recommended that you close them at this time. 34446 071002 ...
-
Bunn B10 Series - page 5
5 • Click this button to change the default installation path. • Click this button to exit the setup program. • Click this button to continue with the software installation. • This label indicates the default installation path of the BrewWISE ® software. • The setup program will then prompt the user to choose a program group. It is recom ...
-
Bunn B10 Series - page 6
6 Program Operation •T o begin using the BrewWISE ® Recipe Writer , plug the serial cable connected to the Recipe Writer Box into the first available serial port on the host computer . If a USB to Serial Adapter Cable was included with your Recipe Writer , you may connect it between the attached serial cable on the Recipe Writer box and the USB ...
-
Bunn B10 Series - page 7
7 New Recipe • Clicking “New Recipe” from the Switchboard screen brings up the main Recipe form. After a Coffee Name has been typed in and the “Enter” or “T ab” key is pressed, the remaining three buttons on the form will become active. Recipe volume parameters may be entered or saved in either English or Metric units. Depending on th ...
-
Bunn B10 Series - page 8
8 Existing Recipes • Clicking the “Existing Recipes” button from either the Switchboard form or the main Recipe form brings up the BrewWISE ® File Handler form. The File Handler form allows the user to Open files, Save files, Delete files, or Sort files by name or number . Double-clicking on a file name in the file list box brings the associ ...
-
Bunn B10 Series - page 9
9 Existing Recipes • After filling in the form for a new recipe or retrieving an existing recipe, the recipe can be edited and saved, written to a memory card, or a hard copy of the recipe can be printed to your default Windows printer . • Clicking “Save” brings up the File Handler form where the user can scroll through the existing recipes ...
-
Bunn B10 Series - page 10
10 Writing Recipes • After a recipe has been filled in completely , it may be transferred to a recipe card by clicking the “Write” button. Make sure that the card is in place on the Writer Box before clicking the “Write” button. A progress bar and a message label will appear at th e bottom of the recipe form during the write process in or ...
-
Bunn B10 Series - page 11
11 Ads • The BrewWISE ® Recipe Writer can be used to transfer ad messages from the BrewWISE ® software into the brewer by using an ad (advertisement) card. Each position can hold five 16-character lines, so that the total ad stored in the brewer can consist of ten 16-character lines. Ads are displayed in screens, each 2-line screen displaying f ...
-
Bunn B10 Series - page 12
12 Dedicated Funnel The Dedicated Funnel screen (shown above) can be accessed by clicking the “Dedicated Funnel” button from the switchboard screen. The Dedicated Funnel Function is intended to be used when: 1. The ground coffee to be used in the funnel is NOT dispensed by a BrewWISE ® grinder . 2. The same coffee name is always used in the fu ...
-
Bunn B10 Series - page 13
13 No-Name Recipes The No-Name recipe screens are accessed by clicking on one of the “No-Name Recipe” buttons on the switchboard screen. The “Coffee Name” in the No-Name recipe screen is filled in automatically by the application and cannot be edited. The “Coffee Number” for a No-Name recipe is always 000 and cannot be changed. No-Name ...
-
Bunn B10 Series - page 14
14 34446 070804 T roubleshooting 1. If you have software for your PDA installed on the computer used to connect to the BrewWISE ® Recipe Writer box, it may reserve the computers serial port as soon as the computer is started up, causing the port to become unavailable to the BrewWISE ® Recipe Writer hardware. In order for the BrewWISE ® Recipe Wr ...
-
Bunn B10 Series - page 15
15 Replacement Parts Recipe Card - 34447.0000 Ad Card - 34448.0000 34446 070804 Replacement cards may be ordered from Bunn-O-Matic using the following part numbers: CARD CONTAINS RECIPE UP Chip Instructio ns for transfer to brew er. • Rem ov e both funnels. • Hold card under sense coil. Use only the left coil on a DUAL brewer. • Displa y will ...
Bunn B10 Seriesについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもBunn B10 Seriesの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBunn B10 Seriesで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。