Porter-Cable BN200V12の取扱説明書

19ページ 0.32 mb
ダウンロード

ページに移動 of 19

Summary
  • Porter-Cable BN200V12 - page 1

    CORDLESS BRAD NAILER Instruction manual The Model and Serial No. plate is located on the magazine of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ IMPORTANT Please ...

  • Porter-Cable BN200V12 - page 2

    GENERAL SAFETY RULES WARNING: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. There are certain applications for whic ...

  • Porter-Cable BN200V12 - page 3

    3 9. THE TOOL COMES EQUIPPED WITH TWIN POWER SOURCE TECHNOLOGY (TPS) ™ . DISCONNECT TOOL FROM AIR SUPPLY HOSE AND/OR REMOVE BATTERY before doing tool maintenance, clearing a jammed fastener, leaving work area, moving tool to another location, handing the tool to another person, or making adjustments. Fig. 4. 1 0 . NEVER USE A TOOL that is leaking ...

  • Porter-Cable BN200V12 - page 4

    4 1 7. REMOVE FINGER FROM TRIGGER when not driving fasteners. Never carry tool with finger on trigger. Fig. 10. 1 8 . DON’T OVERREACH. Keep proper footing and balance at all times when using or handling the tool. 1 9 . FIRE FASTENERS INTO WORK SURFACE ONLY: never into m aterials too hard to penetrate. Fig. 11. 2 0 . GRIP TOOL FIRMLY TO MAINTAIN C ...

  • Porter-Cable BN200V12 - page 5

    5 WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating ...

  • Porter-Cable BN200V12 - page 6

    6 7. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 8. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be sui ...

  • Porter-Cable BN200V12 - page 7

    7 2. Before using a battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery. 3. CAUTION: To reduce risk of injury, Porter-Cable charger should only be used to charge Porter-Cable battery pack. Other types of batteries may burst causing personal injury and damage. Do not ...

  • Porter-Cable BN200V12 - page 8

    8 1 9. Dispose of expended batteries properly. Porter-Cable Battery Packs contain rechargeable, nickel-cadmium batteries. These batteries must be recycled or disposed of properly. Drop off expended battery packs at your local replacement battery retailer, your local recycling center, or at a Porter-Cable Service Center (see list on back page of thi ...

  • Porter-Cable BN200V12 - page 9

    9 All compressed air contains moisture and other contaminates that are detrimental to internal components of the tool. When using external air, an air line filter will remove most of these contaminates and significantly prolong the life of the tool. If an in-line oiler is not available and/or Internal air is used: place 5 - 6 drops of Porter-Cable ...

  • Porter-Cable BN200V12 - page 10

    OPERA TION USING THE TOOL Complete all steps of PREPARING THE TOOL before using the tool. To fasten, move switch (A) Fig. 19 to desired position, grip tool firmly, position nose of tool onto work surface, push forward on tool to depress safety, and squeeze trigger to fire a fastener while allowing tool to recoil. WARNING: Remove finger from trigger ...

  • Porter-Cable BN200V12 - page 11

    11 WARNING: Disconnect tool from air supply and/or remove battery before performing maintenance, clearing a jammed fastener, leaving work area, moving tool to another location, handing the tool to another person, making adjustments. WARNING: Clean and inspect tool daily. Carefully check for proper operation of trigger and safety mechanism. Do Not u ...

  • Porter-Cable BN200V12 - page 12

    12 CLEARING A JAMMED F ASTENER 1. WARNING: Disconnect tool from air supply and/or remove battery. 2. Open magazine and remove any remaining fasteners (see Fig. 16). CAUTION: Remove fasteners from tool before opening the fastener guide plate. Fasteners are under pressure and may shoot out of magazine which could cause injury. 3. Depress the quick re ...

  • Porter-Cable BN200V12 - page 13

    13 BA TTER Y OPERA TION CHARGING THE BA TTERY P ACK GENERAL Before using your cordless Nailer for the first time, the battery pack should be fully charged. If the battery pack is installed in the Nailer, remove it by following instructions under INSTALLING OR REMOVING BATTERY PACK. As a battery pack approaches the discharged state, you will notice ...

  • Porter-Cable BN200V12 - page 14

    14 DIAGNOSTICS The Porter-Cable Charger is equipped with a diagnostic system that automatically checks the battery pack each time a pack is inserted into the charger. If no problems are found, the charger will automatically switch to “Fast Charge” mode as described in NORMAL CHARGING. If a problem is found, it will be indicated by the charger i ...

  • Porter-Cable BN200V12 - page 15

    MAINTENANCE CLEAN AND INSPECT DAIL Y WARNING: Disconnect tool from air supply and/or remove battery before cleaning and inspection. Correct all problems before placing the tool back in use. Wipe tool clean and inspect for wear or damage. Use non-flammable cleaning solutions to wipe exterior of tool only if necessary. DO NOT SOAK tool with cleaning ...

  • Porter-Cable BN200V12 - page 16

    TROUBLESHOOTING WARNING: Disconnect tool from air supply and/ or remove battery before performing any Service Procedure. SYMPTOM PROBLEMS SOLUTIONS 1. Air leak near top of Loose screws. Tighten screws. tool or in trigger area. Worn or damaged Install Overhaul Kit. o-rings or seals. 2. Tool does nothing or Inadequate air supply. Verify adequate air ...

  • Porter-Cable BN200V12 - page 17

    17 PORTER-CABLE LIMITED ONE YEAR W ARRANTY Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material ...

  • Porter-Cable BN200V12 - page 18

    18 NOTES 901891 - 08-31-01.qxd 2/13/02 11:53 AM Page 18 ...

  • Porter-Cable BN200V12 - page 19

    The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABLE ® , QUICKSAND ® , SANDTRAP ® , S ...

メーカー Porter-Cable カテゴリー Nail Gun

Porter-Cable BN200V12のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- BN200V12の取扱説明書
- Porter-Cableの製品カード
- パンフレット
- またはPorter-Cable BN200V12の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Porter-Cable BN200V12の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Porter-Cable BN200V12の取り付け説明書、サービスマニュアル、簡易説明書、またはPorter-Cable BN200V12のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Porter-Cable BN200V12の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Porter-Cable BN200V12デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPorter-Cable BN200V12を使用するのを助ける技術的文書のことです。説明書は通常、全てのPorter-Cable BN200V12ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Porter-Cableの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Porter-Cable BN200V12の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPorter-Cable BN200V12の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Porter-Cable BN200V12に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Porter-Cable BN200V12デバイスの基本機能を使うにあたってのヒント。 Porter-Cable BN200V12のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Porter-Cable BN200V12に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPorter-Cable BN200V12のメーカー/サービスへの連絡先に関する情報。

Porter-Cable BN200V12についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPorter-Cable BN200V12の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPorter-Cable BN200V12で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)