Grizzly G3690の取扱説明書

19ページ 0.53 mb
ダウンロード

ページに移動 of 19

Summary
  • Grizzly G3690 - page 1

    COPYRIGHT © 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. MARCH, 1995. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTIN- UED. MA ...

  • Grizzly G3690 - page 2

    WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonr ...

  • Grizzly G3690 - page 3

    I. INTRODUCTION ................................1 II. COMMENTARY ..................................1 III. SAFETY RULES ................................2 IV. UNPACKING ......................................3 V. AIR ......................................................3 A. AIR PRESSURE ............................3 B. AIR QUALITY ................... ...

  • Grizzly G3690 - page 4

    G3690 Grizzly Imports, Inc. - 1 - I. INTRODUCTION II. COMMENTARY The G3690 Angle Finish Nailer is designed for driving and setting clipped head finish nails in most natural and composite wood materials. It is especially suited for cabinetmaking and fas- tening trim moldings. The tough, lightweight construction offers dependable performance while re ...

  • Grizzly G3690 - page 5

    - 2 - Grizzly Imports, Inc. G3690 III. SAFETY RULES FOR NAIL GUNS 1. NEVER leave the gun connected to an air source when inspecting or maintaining. 2. The gun must be routinely inspected for worn or damaged parts and air leaks. If the gun is faulty, it should be removed from service and labeled, “ DO NOT USE .” 3. Make sure the safety nose is f ...

  • Grizzly G3690 - page 6

    G3690 Grizzly Imports, Inc. - 3 - IV. UNPACKING Carefully remove the items packed in the car- ton. It may be a good idea to save the carton and packing material in case it might be need- ed in the future. Upon removal of all items from the package, you should have: 1. Nail Gun 2. Allen Head Wrench 3. Oil Bottle 4. Safety Goggles Magazine Figure 1 s ...

  • Grizzly G3690 - page 7

    - 4 - Grizzly Imports, Inc. G3690 VI. PRE-USE CHECKS VII. OPERATIONS A. CLEANING Keep the gun nose as clean as possible. Dirt and debris have a tendency to work their way into the gun from the nose. Wipe off any dirt that collects on the outside of the gun before connecting it to the air supply. B. OILING Keep the gun oiled. Use special pneumatic t ...

  • Grizzly G3690 - page 8

    G3690 Grizzly Imports, Inc. - 5 - VII. OPERATIONS C. CONNECTING TO AIR To connect the air hose to the air nozzle at the rear of the gun: 1. Pull back on the female hose connector sleeve. 2. Press the fitting onto the nail gun air noz- zle and release the sleeve. The female fitting will lock onto the male gun fitting. 3. Listen for any air leaks. If ...

  • Grizzly G3690 - page 9

    - 6 - Grizzly Imports, Inc. G3690 VII. OPERATIONS D. TEST FIRING Whenever changing fastener size or composi- tion of material being fastened, the gun should be tested to ensure that the air pressure is set correctly and the gun is working properly. To test fire the gun, wear safety glasses and follow the steps below: 1. Select a sample workpiece si ...

  • Grizzly G3690 - page 10

    G3690 Grizzly Imports, Inc. - 7 - VII. OPERATIONS Caution: If the gun nose is positioned too near the edge of the workpiece or is not held straight, there is a chance that the fastener will either split the workpiece or be deflected. Caution: Compressed air is exhausted out of the top, front of the gun and is directed down toward the gun nose. Do n ...

  • Grizzly G3690 - page 11

    - 8 - Grizzly Imports, Inc. G3690 VIII. INSPECTION WARNING: All inspections and/or any main- tenance is to be performed with the air supply disconnected from the tool. Inspect and maintain the following items daily: 1. Check the air gun for any loose bolts or air leaks. Loose bolts should be retight- ened. Make sure that all lock washers are in pla ...

  • Grizzly G3690 - page 12

    G3690 Grizzly Imports, Inc. - 9 - IX. MAINTENANCE A. JAMMING To repair a jam: 1. Disconnect gun from the air supply. 2. Remove any fasteners remaining in the gun. 3. Open the nose by unlocking the safety clip. 4. Using needle nose pliers, remove any bent fasteners lodged in the gun nose. 5. Close the nose and re-lock the safety clip. 6. Re-load fas ...

  • Grizzly G3690 - page 13

    - 10 - Grizzly Imports, Inc. G3690 IX. MAINTENANCE B. DAMAGED DRIVER To remove the driver: 1. Disconnect gun from the air supply and remove any fasteners from the maga- zine. 2. Loosen the 4 cap screws securing the gun cap to the gun body sequentially. 3. Remove the four cap screws and the gun cap and place them to one side. 4. With your fingers, r ...

  • Grizzly G3690 - page 14

    G3690 Grizzly Imports, Inc. - 11 - IX. MAINTENANCE X. TROUBLESHOOTING D. TESTING AFTER ASSEMBLY To initially test the gun after a repair pro- cedure: 1. Put on your safety glasses, reduce the regulated air pressure to 30 PSI. Do not put any fasteners into the magazine. Connect the air hose. NOTE: It is important to reduce the ini- tial test pressur ...

  • Grizzly G3690 - page 15

    - 12 - Grizzly Imports, Inc. G3690 LIMITED WARRANTY Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original pur- chaser from the date of purchase. This war- ranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, acci- dents, repairs or alterations or lack of mainte- nance. This ...

  • Grizzly G3690 - page 16

    G3690 Grizzly Imports, Inc. - 13 - GRIZZLY MODEL G3690 ANGLE FINISH NAILER Operating Air Pressure: Softwood: ..........................................................................................................80 to 100 PSI Maximum Air Pressure ................................................................................................120 ...

  • Grizzly G3690 - page 17

    - 14 - Grizzly Imports, Inc. G3690 XIV. PARTS DIAGRAM 101 112 113 434 433 433 428 42 6 301 121 123 124 125 114 114A 122 402 401 403 404 441 413 409 405 406 213 302 414 430 431 423 415 438 427 424 436 436 422 422 421 442 418 420 417 439 432 416 429 303 304 305 214 443 444 412 446 445 201 202 203 204 205 206 207 208 210 209 212 211 115 116 117 120 11 ...

  • Grizzly G3690 - page 18

    G3690 Grizzly Imports, Inc. - 15 - 305 PSB15M CAP SCREW M5 - 0.8 x 20 306 G2308 QUICK CONNECT 1 / 4 " NPT 401 P3690401 DRIVER GUIDE 402 P3690402 DRIVER GUIDE COVER B 403 PLW03M LOCK WASHER 6mm 404 PSB06M CAP SCREW M6 - 1.0 x 25 405 PLN01M LOCK NUT M4 - 0.7 406 P3690406 SAFETY GUIDE 407 PRP16M ROLL PIN 3 x 25 408 P3690408 SAFETY DRIVER 409 PN04 ...

  • Grizzly G3690 - page 19

    - 16 - Grizzly Imports, Inc. G3690 A Addresses ....................................................1 Air Pressure ................................................3 Air Quality ....................................................3 C Clean Air Hoses ..........................................3 Cleaning ................................................. ...

メーカー Grizzly カテゴリー Nail Gun

Grizzly G3690のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- G3690の取扱説明書
- Grizzlyの製品カード
- パンフレット
- またはGrizzly G3690の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Grizzly G3690の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Grizzly G3690の取り付け説明書、サービスマニュアル、簡易説明書、またはGrizzly G3690のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Grizzly G3690の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Grizzly G3690デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGrizzly G3690を使用するのを助ける技術的文書のことです。説明書は通常、全てのGrizzly G3690ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Grizzlyの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Grizzly G3690の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGrizzly G3690の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Grizzly G3690に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Grizzly G3690デバイスの基本機能を使うにあたってのヒント。 Grizzly G3690のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Grizzly G3690に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGrizzly G3690のメーカー/サービスへの連絡先に関する情報。

Grizzly G3690についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGrizzly G3690の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGrizzly G3690で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)