Cisco Systems ATA 186の取扱説明書

48ページ 0.51 mb
ダウンロード

ページに移動 of 48

Summary
  • Cisco Systems ATA 186 - page 1

    CH A P T E R 5-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 5 Parameters and Defaults This section pro vides information on the paramet ers and defaults that y ou can use to create your o wn Cisco A T A configuration f ile. This secti on also includes th e voice conf igurat ion menu code fo ...

  • Cisco Systems ATA 186 - page 2

    5-2 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Configuration Text File Template Note The term Cisco A T A is used throughout this manual to refer t o both the Cisco A T A 186 and t he Cisco A T A 188, unless differences b etween the Cisco A T A 186 and Cisc ...

  • Cisco Systems ATA 186 - page 3

    5-3 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults User Interface (UI) Parameter NTPIP:0 AltNTPIP:0 DNS1IP:0.0.0.0 DNS2IP:0.0.0.0 UDPTOS:0xA0 RingOnOffTime:2,4,25 DialTone:2,31538,30831,1380,1740,1,0,0,1500 BusyTone:2,30467,28959,1191,1513,0,4000,4000,0 Reorde ...

  • Cisco Systems ATA 186 - page 4

    5-4 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Configuration-Comp lete Parameter Range Maximum nine char acters Default 0 Voice Configuration Menu Access Code 7387277 Related Parameters OpFlags, page 5-3 3 —Bit 7 Configuration-Complete Parameter This sect ...

  • Cisco Systems ATA 186 - page 5

    5-5 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Parameters for Configura tion Method and E ncryption UseTFTP Settings 1—Use the TFTP server for Cisco A T A conf iguration. 0—Do not use the TFTP serv er for Cisco A T A configuration. Value Type Boolean R ...

  • Cisco Systems ATA 186 - page 6

    5-6 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Parameters for Co nfiguration Method and Encryption Default 0 Voice Configuration Menu Access Code 905 Related Parameters • UseTFTP , page 5-5 • CfgInterv al, page 5-6 CfgInterval Description Use this param ...

  • Cisco Systems ATA 186 - page 7

    5-7 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Network Parameters Note If the Cisco A T A configuration f ile is not encrypted, the v alue must be set to 0 . Value Type Alphanumeric string Range Maximum number of characters: 8 Default 0 Voice Configuration ...

  • Cisco Systems ATA 186 - page 8

    5-8 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Network Para mete r s Default 1 Voice Configuration Menu Access Code 20 Related Parameters • StaticIp, page 5-8 • StaticRoute, page 5-8 • StaticNetMask, page 5-9 • OpFlags, page 5-33 —Bits 3 and 11 St ...

  • Cisco Systems ATA 186 - page 9

    5-9 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Account Information Parameters Voice Configuration Menu Access Code 2 Related Parameters • DHCP , page 5-7 • StaticIp, page 5-8 • StaticNetMask, page 5-9 StaticNetMask Description Use this pa rameter to ...

  • Cisco Systems ATA 186 - page 10

    5-10 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Account Information Parameters UID0 Description This parameter is the User ID (E.164 phone number) for the Phone 1 port. If the v alue is set to zero, the port will be disabled and no dial tone will sound. Val ...

  • Cisco Systems ATA 186 - page 11

    5-11 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Account Information Parameters Voice Configuration Menu Access Code 4 Related Parameters • UID0, page 5-10 • UID1, page 5-11 • PWD1, page 5-12 • UseLoginID , page 5-13 • LoginID0, page 5-13 • Logi ...

  • Cisco Systems ATA 186 - page 12

    5-12 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Account Information Parameters PWD1 Description This parameter is the passwo rd for the Phone 2 po rt. Value Type Alphanumeric string Range Maximum number of characters: 31 Default 0 Voice Configuration Menu A ...

  • Cisco Systems ATA 186 - page 13

    5-13 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Account Information Parameters UseLoginID Description 0—Use UID0 and UID1 as the authentication ID . 1—Use LoginID0 and Login ID1 as the authentication I D. Value Type Boolean Range 0 or 1 Default 0 Voice ...

  • Cisco Systems ATA 186 - page 14

    5-14 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Account Information Parameters LoginID1 Description This parameter is the H.323 lo gin ID for the Phone 2 port of the Cisco A T A. This v alue is used for registrati on and authentication if the UseLo ginID pa ...

  • Cisco Systems ATA 186 - page 15

    5-15 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Gatekeeper Parameters Voice Configuration Menu Access Code 92 Related Parameters • LoginID0, page 5-13 • LoginID1, page 5-14 • PWD0, page 5-10 • PWD1, page 5-12 • NTPIP , page 5-30 • AltNTPIP , pa ...

  • Cisco Systems ATA 186 - page 16

    5-16 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Gatekeeper Parameter s AltGk Description Y ou hav e the option of using t his parameter to static ally specif y the IP addres s of an alternate H.3 23 gatekeeper . Value Type Alphanumeric string Range Maximum ...

  • Cisco Systems ATA 186 - page 17

    5-17 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Gatekeeper Parameters GkTimeToLive Description This parameter specif ies the “time to li ve” v alue that is used when the Cisco A T A re gisters with the H.323 gatek eeper . The registration is v alid unt ...

  • Cisco Systems ATA 186 - page 18

    5-18 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults H.323 Mode Parameter H.323 Mode Parameter This section describes the UseSIP parameter , which is used to set the Cisco A T A to H.323 mode if you are using the H.323 signaling p rotocol. UseSIP Description 0? ...

  • Cisco Systems ATA 186 - page 19

    5-19 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters • DNS2IP , page 5-31 • UDPTOS, page 5-31 • SigT imer , page 5-32 • OpFlags, page 5-33 • VLANSetting, page 5-34 MediaPort Description Use this parameter to specify the base port ...

  • Cisco Systems ATA 186 - page 20

    5-20 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters Related Parameters • RxCodec, page 5-21 • TxCodec, page 5-22 Value Type Integer Range 0 or 3 Default 0 Voice Configuration Menu Access Code 300 Related Parameters • AudioMode, page 5 ...

  • Cisco Systems ATA 186 - page 21

    5-21 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters RxCodec Description Use this parameter to specify receiving-audio codec preference. The follo wing v alues are valid: • 0—G.723 (can be selected only if LBRCodec is set to 0) • 1? ...

  • Cisco Systems ATA 186 - page 22

    5-22 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters Voice Configuration Menu Access Code 36 Related Parameters • LBRCodec, page 5-19 • NumTxFrames, page 5-23 • TxCodec, page 5-22 • AudioMode, page 5-20 TxCodec Description Use this p ...

  • Cisco Systems ATA 186 - page 23

    5-23 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters NumTxFrames Description Use this parameter to select the number of frames per packet that the Cisco A T A transmits: • The frame size for each G.729 data packet is 10 ms. • The frame ...

  • Cisco Systems ATA 186 - page 24

    5-24 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters CallFeatures Description Disable/enable CallFeatures by set ting each corresponding bit to 0 or 1. The lower 16 bits are for the Phone 1 port, and the up per 16 bits are for the Pho ne 2 p ...

  • Cisco Systems ATA 186 - page 25

    5-25 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters PaidFeatures Description Unsubscribe/subscribe to CallFeatur es by setting each corresponding bit to either 0 or 1. The lo wer 16 bits are for the Phone 1 port, and the upper 16 bits are ...

  • Cisco Systems ATA 186 - page 26

    5-26 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters CallerIdMethod Description This 32-bit p arameter sp ecifies the signal fo rmat to use for both FXS ports for generating Caller ID format. Possible v alues are: • Bits 0-1 (method)—0=B ...

  • Cisco Systems ATA 186 - page 27

    5-27 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters Examples The follo wing exampl es are recommended v alu es for the CallerID Method parameter: • USA=0x19e60 • Sweden=0x0 ff6 1 or 0x006af f61 • Denmark=0x0fde1 or 0x 033efde1 Value ...

  • Cisco Systems ATA 186 - page 28

    5-28 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters Default 0x00000000 Voice Configuration Menu Access Code 304 ConnectMode Description This parameter is a 32-bit bitmap used to control th e connection mode of the selected call signaling pr ...

  • Cisco Systems ATA 186 - page 29

    5-29 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters TimeZone Description This parameter is the timezon e offset fr om Gree nwich Mean T ime (GMT) for time-st amping incoming calls with local time (to use for Caller ID display , for e xamp ...

  • Cisco Systems ATA 186 - page 30

    5-30 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters Related Parameters • NTPIP , page 5-30 • AltNTPIP , page 5-30 NTPIP Description This parameter is the NTP IP address, requ ired if DHCP server do es not provide one. The Cisco A T A re ...

  • Cisco Systems ATA 186 - page 31

    5-31 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters Related Parameters • NTPIP , page 5-30 • T imeZone, pa ge 5-29 DNS1IP Description This parameter is the p rimary domain name serv er (DNS) IP address, if the DHCP server does not pro ...

  • Cisco Systems ATA 186 - page 32

    5-32 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters • Bit 3: Throughput b it—1=request high throug hput • Bit 4: Delay bit—1=request low delay • Bits 5-7: Specify datagram precedence. V alues ra nge from 0 (normal precedence) to 7 ...

  • Cisco Systems ATA 186 - page 33

    5-33 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Operatin g Parameters OpFlags Description This parameter enables/d isables vari ous operational features. See T able 5-6 on page 5-33 for bit def initions of this parameter . Value Type Bitmap Default 0x2 Voi ...

  • Cisco Systems ATA 186 - page 34

    5-34 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Operating Parameters VLANSetting Description This parameter is for f irmware ve rsi on 2.15 and 2.14ms, and abo ve. Bitmap def initions are as follo w s for the VLANSetting parameter: • Bi t s 0 - 2 —Sp ec ...

  • Cisco Systems ATA 186 - page 35

    5-35 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs • Bits 18-29—User -specifi ed 802.1Q VLAN ID. • Bits 30-31—Reserve d. Value Type Bitmap Default 0x0000002b Voice Configuration Menu Access Code 324 Related Parameter OpFla ...

  • Cisco Systems ATA 186 - page 36

    5-36 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters Voice Configuration Menu Access Code 81 RingOnOffTime Description This parame ter specifies the ring er cadenc e patter n, expressed as a triplet of int egers “a,b, and c”. • ...

  • Cisco Systems ATA 186 - page 37

    5-37 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs Default 1 Voice Configuration Menu Access Code 310 DialPlan Description The programmable dial plan i s designed for the se rvice provider to cu sto mize the behavior of the Cisco ...

  • Cisco Systems ATA 186 - page 38

    5-38 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters About Dial Plan Commands The follo wing list contains rules for Cisco A T A dial plans: • . —W ildcard, match an y digit entered. • - —Additional digits can b e entered. Th ...

  • Cisco Systems ATA 186 - page 39

    5-39 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs • 0>#t811.rat4—If the f i rst digit entered is 0, the t imeout before aut omatic send is eigh t seconds, an d the terminating character # can be entered at any time to manu ...

  • Cisco Systems ATA 186 - page 40

    5-40 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters For e xample, to en ter an interdigit ti meout of 12 seconds and di scard dialed digits unless 9 11 is entered, you would use the follo wing command: I c | 911 Specifying your o wn ...

  • Cisco Systems ATA 186 - page 41

    5-41 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs Call-Progress Tone Parameters This section contains the following topics: • List of Call-Progress T one Parameters, page 5-41 • T one Parameter Syntax, page 5-41 • Ho w to C ...

  • Cisco Systems ATA 186 - page 42

    5-42 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters • off-time controls the lengt h of time between audible tones in mill iseconds (ms) exp ressed as an intege r from 0 to 0xf ff f sample at 8000 samples/second. • total-tone-tim ...

  • Cisco Systems ATA 186 - page 43

    5-43 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs The follo wing settings are recommended for Sweden: • DialT one = "1,30959,0, 4253,0, 1, 0, 0,1500" (approx imately -5 dBm) • BusyT one = "1,30959,0,2 392,0, 0, ...

  • Cisco Systems ATA 186 - page 44

    5-44 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters BusyTone Description The Cisco A T A plays the busy t one when the callee is b usy . Default values for the nine-integer array • ntone—2 • freq0—3046 7 • freq1—2895 9 ? ...

  • Cisco Systems ATA 186 - page 45

    5-45 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs RingbackTone Description The Cisco A T A plays the ring-back tone when the callee is bein g alerted by the called device. Default values for the nine-integer array • ntone—2 ? ...

  • Cisco Systems ATA 186 - page 46

    5-46 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters AlertTone Description The Cisco A T A plays the alert tone to prompt th e user to enter a phone number when in voking a supplementary service, such as call-fo rwarding, or blind tr ...

  • Cisco Systems ATA 186 - page 47

    5-47 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Ada ptor Administrator’s Guide (H. 323) OL-4008-01 Chapter 5 Pa rameters and Defaults Optional Feature Paramete rs Voice Configuration Menu Access Code 930 Related Parameters • CallFeatures, pa ge 5-24 • PaidFeatures, page 5-2 5 • CallerIdMethod, page 5-26 • SigT imer , page 5-32 ...

  • Cisco Systems ATA 186 - page 48

    5-48 Cisco ATA 186 and Cisco ATA 188 Analog Telephon e Adaptor Administrator’s Guide (H.323) OL-4008-01 Chapter 5 Paramete rs and Defaults Optional Feat ure Parameters ...

メーカー Cisco Systems カテゴリー Network Card

Cisco Systems ATA 186のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ATA 186の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems ATA 186の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems ATA 186の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems ATA 186の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems ATA 186のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems ATA 186の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems ATA 186デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems ATA 186を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems ATA 186ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems ATA 186の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems ATA 186の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems ATA 186に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems ATA 186デバイスの基本機能を使うにあたってのヒント。 Cisco Systems ATA 186のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems ATA 186に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems ATA 186のメーカー/サービスへの連絡先に関する情報。

Cisco Systems ATA 186についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems ATA 186の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems ATA 186で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)