ページに移動 of 120
A vaya 1408 and 1416 T elephones - connected to Integral 5 - User Guide 16-603588 Issue 1 May 2010 ...
Notice While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. A vaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such ...
Downloading documents For the most current versions of documentation, see the Avaya Support Web site: http://www .avaya.com/support Contact A vaya Support Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional sup ...
4 1408/1416 at Integral 5 - User Guide May 2010 ...
Contents Chapter 1: Introduction .............................................................................................................9 Introduction to the 1400 Series Digital Deskphones .........................................................................................9 Overview of phone buttons and features ......................... ...
Expanding conference with another participant .............................................................................................. 33 Connecting conference participants with each other ...................................................................................... 34 Ending the conference call ...................................... ...
Viewing charges for lines / subscribers .................................................................................................. 60 Deleting call charges .............................................................................................................................. 60 Locking the telephone .................................. ...
Changing access PIN ............................................................................................................................. 86 Setup standard access *.........................................................................................................................86 Changing standard PIN * .............................. ...
Chapter 1: Introduction Introduction to the 1400 Series Digital Deskphones The Avaya 1400 Series telephones are ISDN telephones for use with the Integral 5 call processing system.This user guide is written for the 1408 and 1416 Digital Deskphones.These deskphones put convenient features and capabilities at your fingertips, including a phone screen ...
A vaya 1416 T elephone No. Name Description 1 Call/Message W aiting Indicator This light flashes when you receive an incoming call. 2 Phone Display There are 3 (1408) or 4 (1416) lines in the phone display . The phone display presents calling or called party identification, user options, and other information relevant to using the phone. The top li ...
No. Name Description are available in the menu. When a call number is programmed on the key press the key to dial the destination. (Partners are special destinations, see chapter Partners for more information) 7 Hold Press the Hold button ( R button) to put the active call on hold. 8 Conference Press the Conference button to add another party to an ...
About LEDs Each function, partner or destination key has two LEDs, one green and one red, to indicate the status of the function or partner . The status is identified by whether the LED is on, off, or blinking as described in the following tables. Note: If a key is assigned to a destination the LEDs are always off. T able 1: Function key LEDs LED D ...
About this manual Descriptions of optional features are marked with an asterisk in the title. For more information about the optional features, see your system administrator . All the descriptions in this user guide assume a standard assignment of the function keys. If you re-assign the function keys, the procedures may change from those provided i ...
Introduction 14 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 2: Making calls Introduction to making calls Use the procedures provided in this chapter to make calls from your telephone. Note that when you make a call, you can either dial the number and then lift the handset, or lift the handset and then dial the number . Both orders are correct. However , if you lift the handset first and then dial th ...
Instead of entering the external line code, you can also press a line key . If you have activated LN on dialing you only need to dial the external number . 2. Enter the desired call number . 3. Lift the handset. Related topics: Seizing exchange line automatically on page 73 Calling with a destination key 1. Press the destination key for the desired ...
Calling a person from the phone book entry 1. Press the Phone book / Contacts button. 2. Select the entry you want to dial. Note: T o reach the entry more quickly , you can also enter one or more of the first letters of the name. 3. Lift the handset. Related topics: Introduction to the phone book on page 45 Calling partners 1. Press the appropriate ...
3. T o adjust the volume, press + or - on the V olume button. 4. Do one of the following: a. T o continue the call using the handset, lift the handset. T o activate the speaker additionally ( Monitoring ), press the Speaker button. T o activate Handsfree press the Speaker button once more. b. T o end the call, press the Speaker button. Requesting a ...
1. Press the Redial button. 2. Select the desired call number . 3. Lift the handset. Requesting automatic redialing Note: Y ou can specify the number of automatic redial attempts and the time between two attempts in the Dial settings . Y ou can only use Automatic redial if you are calling on a digital exchange line. The external number dialed is bu ...
Each person on the call will hear a cut-in tone. Y ou are now included in the call. 3. T o disconnect from the call, press the Drop button, or replace the handset. Presenting yourself with specified call numbers * If your system is configured to do so, every time you make an external call you can select the number you want to present to the call re ...
3. Press the OK button. 4. Select who you want to send the announcement to, e.g. Announcement to Group 1 . 5. Press the OK button. Y ou can now make your announcement. Making an individual announcement Use this procedure to make a announcement to a subscriber you are just calling and whose telephone is ringing. 1. Press the Announce function key . ...
1. Enter the call number . 2. Select Anonymous call . 3. Press the OK button. Y our number will not be transmitted to the called party for your next external call. 4. Lift the handset. Making calls 22 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 3: Handling calls Introduction to handling calls When you receive an incoming call your telephone rings, the Call LED flashes and the call is indicated in the display . Y ou will be shown the number or name the caller dialled, e.g. when you receive a diverted call. Y ou can lift the handset or use the Speaker button and talk with the handse ...
A list of incoming calls will be shown. 3. Press the OK button. 4. Lift the handset. Answering a call for a partner When a partner's telephone rings, the corresponding LED on your telephone flashes. Y ou can pick up that call and answer as deputy . 1. Press the Partner key and wait until the call reaches your own telephone. 2. Lift the handset ...
Press the Hold button, to take the call of hold, press Hold again. Muting a call 1. Press the Mute button during a call so that the other person cannot hear you. 2. Press the Mute button again to unmute the call. Referring back during a call (consultation call) During a call: 1. Press the Hold button. Y our first talking partner is waiting and cann ...
Y ou can now talk to the first talking partner . The second partner is put on hold. T ransferring a call 1. Press the Hold button. Y our first call is put on hold. 2. Dial the appropriate call number . Y ou do not need to wait until the call is accepted. 3. Press the T ransfer button or hang up. Answering an additional call (second call) The featur ...
Chapter 4: Call diversion Introduction call diversion Y ou can divert incoming calls to another extension. Y ou can set this up both for your own and other telephones. Y ou can also divert calls to your telephone. In all these variants, you can choose • whether this should always take place, • only if the telephone is busy • or only if the te ...
6. Select one of the following: • immediately • after time • on busy 7. Press the OK button. The status information Divert to … - appears in the display . Alternatively , a clock symbol is shown for call diversion after "after time" or a B for call diversion "on busy". 8. T o deactivate call diversion: a. Select the appr ...
• on busy 7. Press the OK button. The status information Divert from 1234- appears in the display . Alternatively , a clock symbol is shown for call diversion after "after time" or a B for call diversion "on busy". 8. T o deactivate call diversion: a. Select the appropriate status information. b. Press the OK button. c. Press ...
8. Select one of the following: • immediately • after time • on busy 9. Press the OK button. Both subscribers involved will get the status information Divert from … - or Divert to … - . Alternatively , a clock symbol is shown for call diversion after "after time" or a B for call diversion "on busy". Related topics: Int ...
Diverting bundles* Call diversion can be set up to take place at the public exchange. Internal users can telephone without hindrance. The cost of the diverted call is allocated to the subscriber who activated the diversion. The caller only pays the costs up to the public exchange. The call units for the diversion are not logged in your telephone sy ...
Call diversion 32 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 5: Three-party conference call Introduction to three-party conference calls Y ou can use a three-party conference call to speak with two people at dif ferent locations on the same call. A conference between a call waiting (second call) and the first talking party is not possible. Making a conference call 1. While active on a call, press the ...
If you set up a Conference bridge in your system, up to 9 different subscribers can join the conference bridge. With a conference bridge set up additional conferences with more than three participants are no longer possible. 1. While you are in a three-party conference press the Conference button. 2. Enter the call number of the new participant. Wh ...
Chapter 6: Conference bridge Introduction conference bridge Y our system provides you with a virtual conference room (bridge). All conference participants which have dialed into the bridge are connected to one another . • Depending on the structure of your system, up to 9 internal and external subscribers can dial into the conference bridge. • ...
If the conference bridge is reserved again immediately after your conference (15 minutes later), an alert tone sounds to warn you that the conference is approaching its end. 10 minutes before the beginning of the next conference, the connection is ended. Managing conference bridge calls The inviting participant has specific managing rights in a con ...
The selected participant is dropped from the conference. Reserving conference bridge (one-time appointment) Y ou must have permission to reserve a conference room. The default access PIN must be activated or amended. 1. Press the A vaya Menu button. 2. Select Conference bridge . 3. Press the OK button. 4. Select My conference . 5. Press the OK butt ...
Reserving conference bridge (recurring appointment) Y ou can reserve the conference bridge for recurring appointments. This could be, for example, a weekly group meeting on Friday at 9:00. 1. Press the A vaya Menu button. 2. Select Conference bridge . 3. Press the OK button. 4. Select My conference . 5. Press the OK button. 6. Press the New softkey ...
Reserving a conference bridge for others If you have permission, you can also reserve a conference bridge for others. Dialing into the conference bridge is then secured with the access PIN for the subscribers you have set up the conference for . 1. Press the A vaya Menu button. 2. Select Conference bridge . 3. Press the OK button. 4. Select Confere ...
Conference bridge 40 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 7: Managing the call log Call log If you do not answer an external call, the caller ’s number will be stored in the call log together with the time and date of the call. Y ou can also have other entries made in the call log, e.g. internal calls or conversations with external callers. The most recent entry is at the top of each list. Y ou ...
V iewing the call log 1. Press the Call Log button. 2. Select the appropriate entry . 3. Press the OK button. The detailed display of the appropriate entry is shown. Removing entries from the call log If you call back an entry from the call log and a connection is established, the entry in the call log will be deleted automatically . Use the follow ...
1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the OK button. 6. Select Call log . 7. Press the OK button. 8. Select deleted after … . The right window margin shows the time after which new call log entries will be automatically deleted. 9. Press the Modify softkey several times if ...
Note: If you have entered a number without a name, you can edit the entry later and save it under a name. Adding additional entries in the call log Y ou can set additional entries to be made in the call log. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the OK button. 6. Select Call ...
Chapter 8: Managing the phone book Introduction to the phone book Y our telephone has a personal phone book. Y ou can store up to 100 individual numbers with names which will only be available on your telephone. Y ou can then dial phone book numbers quickly and easily . Y ou can modify the individual phone book entries yourself. Up to 800 numbers a ...
If you want to enter an internal number , you have to press Option > internal call number before making the entry . 5. Press the OK button. 6. Enter name. 7. Press the Save softkey . Result The entries in your personal phone book correspond to the code dial destinations starting from number 900. Code dialing destinations 900 to 904 can also easi ...
Deleting an entry 1. Press the Phone book / Contacts button. 2. Select the entry you want to delete. 3. Press the Delete softkey . 4. Press the Delete softkey . Deleting an entry 1408/1416 at Integral 5 - User Guide May 2010 47 ...
Managing the phone book 48 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 9: Messages Introduction messages Y ou can send a text message to subscribers in your system, e.g. when the caller does not answer or the connection is busy . The messages can consist of standard texts prepared by your system administrator or your own text. T ext messages can only be received by phones with displays. A maximum of 10 message ...
The text message will be sent immediately . Sending a standard text T o be able to select from standard texts, these must first have been entered into the system. 1. Press the A vaya Menu button. 2. Select Message . 3. Press the Message button. 4. Select the desired standard text. 5. Press the OK button. 6. Change or add to the message, e.g. to inc ...
8. Select Message to caller . 9. Press the OK button. The text is saved and a status information appears in your display . Any internal caller who tries to call you will now get the message shown on his display . Sending a text message for an internal caller 1408/1416 at Integral 5 - User Guide May 2010 51 ...
Messages 52 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 10: Mobile System Subscribers (Managed Mobility Access) Introduction MMA Y ou can dial into your system remotely and then make a call as if you were using your company telephone (MMA, Managed Mobility Access). The number of the telephone making the call must be registered and it must support DTMF dialling. If you use "Callback" yo ...
Dialing into your system using callback Note: This feature has to be set up by your system administrator . 1. Dial the dial-in number for your system from a registered external telephone with the callback setting activated. W ait for a ringback tone. After a short time, the Integral 5 disconnects. Y ou will hear the busy tone. 2. Replace the handse ...
Referring back Y ou are in a conversation. 1. Press * 7 keys. The first talking partner is waiting and cannot hear what you say . 2. Enter the number you want to consult. Carry out the refer-back call. 3. Press * 7 keys again. The refer-back call is ended and you are speaking again with your first talking partner . Starting a conference call Y ou a ...
Modifying the twinning/call diversion number Y ou have established a connection to your system from a registered telephone.The telephone from which you are calling must have caller display activated. Y ou hear the dial tone. 1. Press the # key . 2. Press the * key . T winning/Call diversion is now activated to the telephone you are currently callin ...
1. Press the # key followed by the code number of the code dialing destination you want to call, e.g. 2 for ”902”. The code dialing destinations correspond to the first entries in your personal phone book. Assigning code dialing destinations to the codes: Code dialing destination 900 -> Code number 1, Code dialing destination 901 -> Code ...
Mobile System Subscribers (Managed Mobility Access) 58 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 1 1: Using the A vaya Menu Call charges Introduction to call charges During a call, you can view the current charges. Y ou can view the charges for your last call. All call charges incurred since the last reset are stored and totaled in your telephone system. Y ou can check the charges for each subscriber and each line separately . Furtherm ...
V iewing charges for lines / subscribers 1. Press the A vaya Menu button. 2. Select Charges . 3. Press the OK button. 4. Select one of the following: • T otal subs. , for showing the charges for a specific subscriber , • T otal line , for showing the charges for a specific line. 5. Enter the extension or line number , e.g. 01 for line 1. Instea ...
Locking the telephone T elephone lock Locking your telephone prevents unauthorized use during an absence. T o unlock your telephone, a Personal Identification Number (PIN) is required. The following functions are still available when the telephone is locked: • Answering calls, • Dialing internal call numbers, Changing the PIN Y ou need a PIN (P ...
1. Press the A vaya Menu button. 2. Press the Lock function key . 3. Press the OK button. The status information Phone locked is shown. Unlocking the telephone 1. Select Phone locked . 2. Press the OK button. 3. Enter the current PIN. Managing appointments Appointments (reminders) Y ou can set your telephone to remind you of important appointments. ...
Entering an appointment for today 1. Press the A vaya Menu button. 2. Select Appointments , and if necessary select Own appointm . All set appointments will be shown. 3. Select an appointment, which is marked empty , e.g. Appt. 1 . 4. Press the OK button. 5. Press the T oday softkey . 6. Enter the time in the form "hours minutes", e.g. 10 ...
7. Enter or add any text. 8. Press the OK button. Result At the specified time, a signal tone sounds and the text you have entered is displayed. Entering a recurring appointment 1. Press the A vaya Menu button. 2. Select Appointments , and if necessary select Own appointm . All set appointments will be shown. 3. Select an appointment, which is mark ...
Press the OK button. The signal tone stops and the appointment reminder will be deleted in the display . Deleting an appointment 1. Press the A vaya Menu button. 2. Select Appointments , and if necessary select Own appointm . 3. Select the desired appointment. 4. Press the OK button. 5. Press the Delete menu item. Setting appointments for others 1. ...
Using the Avaya Menu 66 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 12: Customizing your telephone Setting parameters for your telephone Changing the acoustic signaling Use this procedure to change the volume of several tones. Note: Y ou can change the individual settings during a call by pressing + or - on the V olume button. Y ou can also change any setting by pressing the numeric key of the desired setti ...
The new setting sounds immediately to be checked. 10. Press the Back softkey . Setting the ringing tone melody Y ou can assign dif ferent melodies to each call type: • Internal call: Call from inside your telecommunications system • External call: Call from outside your telecommunications system • Message call: When a message is received • ...
1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Display/Acoustics . 5. Press the OK button. 6. Select MSN call type (off) . 7. Press the Modify softkey . 8. If you wish to hear your personal ring tones again, change the setting back to (off) . 9. Press the Back softkey . Setting the contrast 1. Press the A va ...
Setting the language 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Display/Acoustics . 5. Press the OK button. 6. Select Language . 7. Press the OK button. 8. Select the language you want to use for display texts. 9. Press the OK button. Y our telephone will reset itself. All display texts will now be in th ...
• 3: Loud connection purely digital or internal connection. This is normally the best setting if you are using your telephone's build-in-loudspeaker . • 4: When you have connected an additional loudspeaker . 10. Press the Back softkey . Deactivating ringing tone temporarily (Do not disturb) If you do not wish to be disturbed, you can tempo ...
The system can activate night service automatically at times programmed by your system administrator . The calling stations for the night service can be set in the menu Settings > System functions . 1. Press the A vaya Menu button. 2. Select Night service . 3. Press the OK button. 4. Select Night service 1 (or 2, 3, autom. Night service) . 5. Pr ...
Seizing exchange line automatically Y ou can automatically seize an exchange line every time you dial with the handset on hook. Y ou then never have to dial the external line code. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Dial settings . 5. Press the OK button. 6. Select LN on dialing (off) . 7. Press ...
6. Select Line / off-hook (off) . 7. Press the Modify softkey . 8. Press the Back softkey . The new setting is saved. Result If you have switched on "Line/off-hook", you must first press the Hold button to make an internal call. Setting the number of redials When you activate automatic redial: Use this procedure to set how often the diali ...
Setting redial interval When you activate automatic redial: Use this procedure to set the time that elapses between two automatic redials. Y ou can select times of 15, 30, 60, 90 or 120 seconds. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Dial settings . 5. Press the OK button. 6. Select Redial every … ...
7. Press the Modify softkey several times until the desired setting is shown: • off , to switch the number display off completely , • own , to send your internal extension number (e.g. 7505-12) • Master , to send only your company telephone number (e.g. 7505-0). 8. Press the Back softkey . The new setting is saved. Result If enabled in your s ...
T urning direct dialing on or off By default, direct dialing is set to on. Then dialing begins immediately when the first digit or a destination is pressed. Y ou can turn this setting off. Then you can type in a whole call number first and then dial it as a block. Y ou can then check the call number again and correct it if necessary . 1. Press the ...
6. Select Second call (on) . 7. Press the Modify softkey . 8. Press the Back softkey . The new setting is saved. Result If you are making a call and have switched off second call, a caller will receive the busy signal. Assigning code numbers * Every outgoing and incoming call can be assigned a code number . This enables the call to be assigned to a ...
Extending call display Y ou can set your telephone to always display not only the caller ’s number or name but the number which they dialed. This tells you whether the caller wants to speak to service or the workshop, for example. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the O ...
The new setting is saved. Removing telephone from hunt groups If your telephone is assigned to one or more hunt groups: Use this procedure to temporarily remove your telephone from these hunt groups. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the OK button. 6. Select Hunt group (o ...
7. Press the Modify softkey . 8. Press the Back softkey . The new setting is saved. Activating remote headset Use this procedure to activate the use of a cordless convenience headset. 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the OK button. 6. Select Remote headset (off) . 7. Pre ...
Note: All the procedures described in this user manual assume a standard assignment of the function keys. If you re-assign function keys, please bear in mind that this may change the operating procedures. Functions assigned to keys no longer appear in the menu. Related topics: Calling with a destination key on page 16 Assigning functions to keys Fu ...
5. Press the OK button. The description and current assignment of all keys will be displayed. 6. Select the key you want to change or assign. 7. Press the OK button. 8. Select Destination key . 9. Press the OK button. The call numbers or names stored in your individual phone book are displayed. 10. Select the destination you want to assign to this ...
Assigning partners to keys 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Function keys . 5. Press the OK button. The description and current assignment of all keys will be displayed. 6. Select the key you want to change or assign. 7. Press the OK button. 8. Select Partner . 9. Press the OK button. All inter ...
Y ou can now see the function or call number previously assigned to the key . 7. Select delete . 8. Press Delete softkey . The key is now free again. Conference bridge settings Set up conference bridge * The conference bridge can only be reserved by authorized subscribers. Each of these subscribers can change the access PIN themselves. A standard P ...
10. Select Activate . 1 1. Press the OK button. The subscriber can now reserve the conference bridge using the access PIN set. Changing access PIN Y ou can change your access PIN for the conference bridge at any time. The changed access PIN applies immediately , even for conferences which have already been reserved and which are still open. If you ...
4. Select Applications . 5. Press the OK button. 6. Select Conference bridge . 7. Press the OK button. 8. Select Standard PIN . 9. Press the OK button. Y ou are shown that the standard PIN cannot be used, e.g. PIN: 0000 Not active . 10. Select Activate . 1 1. Press the OK button. 12. Press the Back softkey . Y ou can now access the conference room ...
Managed Mobility Access settings Introduction MMA settings Up to 50 external numbers can be registered on your system to use Managed Mobility Access (MMA). Each external number is assigned to a fixed internal subscriber . Each internal subscriber can be assigned to more than one external number . The internal subscriber can be given the option of u ...
10. Select a number you want to register from the list or enter the external number (with dialing code), e.g. 0696 50512 . The number list contains all the external numbers on the call log of the internal subscriber . Note: This saves a lot of keying in numbers. For example, you could simply call your extension using the mobile whose number you wan ...
A list of all the external numbers registered appears. 8. Select the number whose settings you want to change. 9. Press the OK button. 10. Change the external number as usual. 1 1. If necessary , press the Options softkey and select and modify one or several of the following settings: • Callback (off) : T o allow callback option, change setting t ...
Using call filter Calls from subscribers in the call filter list are still signaled even when you have set up "Do not disturb". The call filter list contains up to 10 entries. Y ou can set up a special ringtone for calls from numbers on the call filter list (VIP ringtone). Caution: Y ou can also use the call filter to prevent call diversi ...
Deleting entries from the call filter 1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select Applications . 5. Press the OK button. 6. Select Call filter . All call filter entries are shown. 7. Select the entry you want to delete. 8. Press the Delete softkey . 9. Press one of the following softkeys: • Entry , to d ...
Chapter 13: Settings for your telephone system Introduction Y ou can perform many of the settings for your telephone system from your Avaya 1400 Series telephones. The settings apply to all the telephones in your system. • External callers can often reach your company using various different numbers. For each of these numbers you can define which ...
3. Press the OK button. 4. Select System functions . 5. Press the OK button. 6. Select Day service . 7. Press the OK button. 8. Enter the two-digit number of the line for which you want to set up operators. Y ou can also simply press the corresponding line key instead of entering the line number . 9. Select the number for which you want to set up a ...
5. Press the OK button. 6. Select Night service . 7. Press the OK button. 8. Enter the two-digit number of the line for which you want to set up operators. Y ou can also simply press the corresponding line key instead of entering the line number . 9. Select the number for which you want to set up an operator . 10. Press the OK button. 1 1. Enter th ...
5. Press the OK button. 6. Select Call forwarding . 7. Press the OK button. 8. Enter the two-digit number of the line for which you want to set up operators. Y ou can also simply press the corresponding line key instead of entering the line number . 9. Select the number for which you want to set up an operator . 10. Press the OK button. 1 1. Enter ...
8. Select the number for which you want to change second call barring. 9. Press the OK button. 10. If necessary select other numbers for which you want to change the setting. 1 1. If necessary press the OK button. 12. Press the Phone/Exit button. The new setting is saved. Result If you are in a call a further external caller would get a busy tone, ...
1. Press the A vaya Menu button. 2. Select Settings . 3. Press the OK button. 4. Select System functions . 5. Press the OK button. 6. Select Customer pswd . 7. Press the OK button. 8. Enter the old password if one has already been assigned. 9. Enter the new customer password (new PIN) as four digits. 10. Press the Back softkey . The new setting is ...
Chapter 14: Auxiliary devices Button module DBM32 A DBM32 button module provides 32 buttons. Y ou can connect one or two DBM32 to your Avaya 1416 telephone. No button module can be connected to the A vaya 1408 telephone. Y our system administrator can assign the buttons according to your preferences. The following options are available to you: • ...
1 Buttons with LEDs 2 Strips for labeling Dialing with the DBM32 button module: Use the DBM32 buttons just like the destination or partner keys located directly on your telephone: Lift the handset and then press the button for the desired subscriber . T able 4: LED indications LED Connection Blinking red fast Partner receives an external call. Blin ...
Starting a call: Enter the call number and press the Headset button. Switching on monitoring: Y ou can switch on monitoring on the telephone while you are on a call with the headset. Press the Speaker button. The button's LED lights up. Using a headset 1408/1416 at Integral 5 - User Guide May 2010 101 ...
Auxiliary devices 102 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 15: Hotel functions Introduction Y ou can use the hotel functions in small to medium-sized hotels and guest houses. Y our system administrator can connect up to three DBM32 modules to the Avaya 1416 telephone for executing these functions. Available functions include checking guests in and out, viewing guest charges, disabling direct inward ...
Layout of the hotel functions on the DBM32 button module * No. Name Description 1 Check-in / Check- out For checking guests in and out. 2 DDD (Disable Direct Dial) An external caller cannot directly dial the guest’ s room, but must be connected via the switchboard. 3 Message The switchboard can send a message to a room telephone. 4 Disable guest- ...
Checking in * 1. Press the Check-in button. 2. Press the button for the desired room. 3. Select the desired language. Y ou can choose between several languages for the menu displays on the guest telephone. 4. Press the OK button. The guest is checked in. The button lights up. Result The menu displays on the guest telephone and the voice announcemen ...
Result All the guest’s messages, wake-up calls, call diversions and callbacks are deleted upon check- out. Direct dial from other rooms is disabled. On checking out, an automatic printout of the total is also possible. Consult your system administrator if necessary . Querying call charges * 1. Press the A vaya Menu button. 2. Select Charges . 3. ...
1. Select this menu item, e.g. 101: New messages (2) . 2. Open the voice mail box by calling the voicemail server . 3. Enter the room number . 4. Press the OK button. The connection to the guest’s voice mail box is established. The voice mail box can be transferred to another telephone in the usual way (See transfering a call). There, the custome ...
1. Press the DDD (Disable Direct inward Dial) button. The button LEDs of all rooms which cannot be called directly light up. 2. Press the button for the desired room. The button LED lights up or goes out, depending of the new DDD status of the room. 3. Press the Exit button. The DBM32 module returns to displaying the calling status of the room tele ...
The button LED lights up or goes out, depending of the new charge limit status of the room. 3. Press the Exit button. The DBM32 module returns to displaying the calling status of the room telephones. W aking guests * With the wake-up call, you can send your own text or one prepared by your system administrator . Y ou can change that text or compose ...
Hotel functions 1 10 1408/1416 at Integral 5 - User Guide May 2010 ...
Chapter 16: Menus Menu overview The following contains an overview of the menu structure of the Avaya 1400 Series telephones connected to Integral 5. The first three menu levels are shown. The menu structure shown here may differ from the actual menu structure on your telephone. Deviations from the menu overview shown here may arise due to the feat ...
Menu item in basic menu One menu level lower One menu level lower Conference bridge Own conference Conference for others Settings Display/Acoustics Acoustics/Contrast Partner beep Do not disturb MSN call type Language Function keys Dial settings Autom. Handsfree LN on dialling Line / off-hook Number of redials [0] Redial every [ s] Answ .Back Secon ...
Menu item in basic menu One menu level lower One menu level lower Day service Night service 1 (2, 3) Call forwarding Date/time Customer pswd … *) T raffic statistics *) Further menu options will be displayed if the Service department has enabled you to program the corresponding functions: subscriber names, substitute terms, classes of service, sy ...
Menus 1 14 1408/1416 at Integral 5 - User Guide May 2010 ...
Appendix A: Remote features Changing call diversion remotely * Y ou can call your telephone system from outside to set up or change a call diversion for your telephone or for other telephones. This is possible from any telephone with DTMF suffix dialling. In many cases, you can use only certain pre-set telephones for this feature. Y our system admi ...
Remote features 1 16 1408/1416 at Integral 5 - User Guide May 2010 ...
Index A acknowledging appointment ......................................................... 64 adjusting handsfree operation ............................................. 70 announcement replying ................................................................ 21 anonymous calling ...................................................... 21 answered c ...
D date ............................................................................ 97 day service ................................................................. 93 DBM32 ................................................................ 99 , 104 hotel functions .................................................... 104 deleting .................... ...
lock ............................................................................. 61 locking ........................................................................ 61 telephone ............................................................. 61 M making a call ......................................................... 15 , 16 Managed Mobility Access ...
deactivating .......................................................... 77 second call barring ..................................................... 96 settings telephone system ................................................. 93 signaling calls on two telephones ................................................ 30 source discrimination code ...... ...
Avaya 1408のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 1408の取扱説明書
- Avayaの製品カード
- パンフレット
- またはAvaya 1408の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Avaya 1408の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Avaya 1408の取り付け説明書、サービスマニュアル、簡易説明書、またはAvaya 1408のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Avaya 1408の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Avaya 1408デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAvaya 1408を使用するのを助ける技術的文書のことです。説明書は通常、全てのAvaya 1408ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Avayaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Avaya 1408の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAvaya 1408の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Avaya 1408に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Avaya 1408デバイスの基本機能を使うにあたってのヒント。 Avaya 1408のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Avaya 1408に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAvaya 1408のメーカー/サービスへの連絡先に関する情報。
Avaya 1408についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAvaya 1408の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAvaya 1408で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。