Mitsubishi WD2000の取扱説明書

40ページ 4.82 mb
ダウンロード

ページに移動 of 40

Summary
  • Mitsubishi WD2000 - page 1

    WD2000 DLP™ PROJECTOR MODEL WD2000 User Manual This User Manual is important to you. Please read it befor e using your projector . ENGLISH ...

  • Mitsubishi WD2000 - page 2

    EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning fl ash with arr owhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “d ...

  • Mitsubishi WD2000 - page 3

    EN-3 ENGLISH Contents Important safeguards ........................................................................................................................ 4 Preparing your pr ojector .................................................................................................................... 6 Using the remote contr ol ............. ...

  • Mitsubishi WD2000 - page 4

    EN-4 Important safeguar ds Please read all these instructions r egarding your projector and r etain them for future refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operatin ...

  • Mitsubishi WD2000 - page 5

    EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fi r e or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high voltage cir cuitry . An i ...

  • Mitsubishi WD2000 - page 6

    EN-6 Pr eparing your projector 1 2 3 Checking accessories The following accessories are pr ovided with this projector . Check to be sure that all of the accessories are packed in the package. Important: • The attached power cords ar e to be used exclusively for this product. Never use them for other products. Inserting the batteries into the remo ...

  • Mitsubishi WD2000 - page 7

    EN-7 ENGLISH Overview Control panel T erminal board 1 2 6 7 8 4 5 3 POWER MENU ENTER ST A TUS AUTO POSITION COMPUTER ZOOM/FOCUS LENS SHIFT KEYSTONE VIDEO VOLUME 1 5 6 2 3 4 7 8 9 11 10 1 Speaker 2 Control panel (inside the cover) 3 Air outlet grille 4 Remote control sensor (Fr ont) 5 Air inlet grille 6 Remote control sensor (Rear) 7 T erminal board ...

  • Mitsubishi WD2000 - page 8

    EN-8 1 2 Preparating your projector (continued) Bottom side 1 Lamp cover 2 Adjustment feet Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. Remote control 1 Laser aperture 2 T ransmission window 3 Wir ed remote control jack 4 Indicator 5 POWER button 6 VIDEO butto ...

  • Mitsubishi WD2000 - page 9

    EN-9 ENGLISH Using the r emote control Operational range of the remote contr ol • Keep the remote contr ol photo-sensor out of direct sunlight or fl uor escent lamp light. • Keep the remote control photo-sensor at least 2 m away from fl uorescent lamps. Otherwise, the remote control may malfunction. • If there is an inverter -operated fl u ...

  • Mitsubishi WD2000 - page 10

    EN-10 W A A=B B Setting up your pr ojector Setting up the screen Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector . (See below .) • Install the screen and pr ojector so that the projector’ s lens is placed at the same height and horizontal pos ...

  • Mitsubishi WD2000 - page 11

    EN-11 ENGLISH Caution: • Placing the pr ojector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard boar d under the projector to facilitate ventilation. • Place the pr ojector at least 50 cm (or 20 inches) away from the wall to pr event the air inlet grille and the air outlet grilles that emit hot air fr ...

  • Mitsubishi WD2000 - page 12

    EN-12 40 102 24 61 32 81 19 49 32 81 2 6 2.6 7 54 1.4 74 1.9 12 30 2 6 3 8 60 152 36 91 48 122 29 73 48 122 4 9 3.8 10 82 2.1 112 2.8 18 46 3 9 5 12 80 203 48 122 64 163 38 98 64 163 5 12 5.1 13 110 2.8 150 3.8 24 61 4 11 6 16 100 254 60 152 80 203 48 122 80 203 6 15 6.4 16 138 3.5 189 4.8 30 76 6 14 8 20 150 381 90 229 120 305 72 183 120 305 9 23 ...

  • Mitsubishi WD2000 - page 13

    EN-13 ENGLISH 2 1 AUDIO OUT AUDIO IN 2 1 2 1 Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the pr ojector and that of the computer are turned off. • When connecting the projector to a desktop computer , disconnect the RGB cable that is connected to the monitor . For analog connectio ...

  • Mitsubishi WD2000 - page 14

    EN-14 2 1 1. Plug the attached power cord into the power cord inlet of this projector . 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Eur ope are included with this projector . Use the appropriate one for your country . • This projector uses the power plug of 3-pin gr ounding type. Do not ...

  • Mitsubishi WD2000 - page 15

    EN-15 ENGLISH POWER MENU ENTER ST A TUS AUTO POSITION COMPUTER ZOOM/FOCUS LENS SHIFT KEYSTONE VIDEO VOLUME C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up r ed. • If the projector was turned off befor e the lamp was cooled down suf? ...

  • Mitsubishi WD2000 - page 16

    EN-16 POWER MENU ENTER ST A TUS AUTO POSITION COMPUTER ZOOM/FOCUS LENS SHIFT KEYSTONE VIDEO VOLUME Viewing computer images (continued) T o stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press any button except the POWER button. 14. Press the P ...

  • Mitsubishi WD2000 - page 17

    EN-17 ENGLISH Connecting to a video player , etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector . 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector . 3. Connect the other end (yellow) of the audio/video cable to th ...

  • Mitsubishi WD2000 - page 18

    EN-18 C B (P B ) Y C R (P R ) B G R AUDIO IN-2 BNC cable (option) DVD player or HDTV decoder BNC-RCA connector (option) COMPUTER/COMPONENT VIDEO IN-2 Connecting to video equipment having a DVI-D terminal Y ou can project high-quality images by connecting the DVI-D terminal of this pr ojector to video equipment having a DVI-D output terminal. In add ...

  • Mitsubishi WD2000 - page 19

    EN-19 ENGLISH C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up r ed. • If the projector was turned off befor e the lamp was cooled down suffi ciently last time, the fan may start r otating and the POWER button may not work after the ...

  • Mitsubishi WD2000 - page 20

    EN-20 T o stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press any button except the POWER button. 14. Press the POWER button again. • The lamp goes out and the projector goes into a standby mode. In this standby mode, the ST A TUS indicator ...

  • Mitsubishi WD2000 - page 21

    EN-21 ENGLISH Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote contr ol: 1. Press the ASPECT button. • Every time the ASPECT button is pressed, the aspec ...

  • Mitsubishi WD2000 - page 22

    EN-22 Menu operation • Menus are not displayed when no signal is supplied to the pr ojector . * 1: Not available when COLOR ENHANCER is set to sRGB. * 2: Not available with certain signals. * 3: Available only when the input signal is TV50, TV60, 480i or 576i. * 4: Available only when the sour ce is a COMPUTER/COMPONENT VIDEO IN-1. * 5: Setting r ...

  • Mitsubishi WD2000 - page 23

    EN-23 ENGLISH IMAGE opt. CONTRAST BRIGHTNESS 0 0 STANDARD 0 0 0 COLOR TINT SHARPNESS COLOR TEMP . AUTO COLOR ENHANCER XGA60 INST ALLATION opt. ON SPLASH SCREEN AUTO POWER OFF BACK COLOR LAMP MODE OFF OFF ON BLUE AUTO POWER ON STANDARD OFF IMAGE REVERSE XGA60 TEST PA TTERN CROSS HATCH ZOOM/FOCUS LOCK OFF OFF LENS SHIFT LOCK LENS SHIFT RESET OK FEA T ...

  • Mitsubishi WD2000 - page 24

    EN-24 3. FEA TURE menu ITEM SETTING FUNCTION ASPECT AUTO Select to change the aspect ratio automatically depending on the input signal. (Select this option for normal use.) 16:9 This option allows you to select the display position of squeezed (or horizontally compressed) images stor ed on DVD discs. By pressing the ENTER button, you can select the ...

  • Mitsubishi WD2000 - page 25

    EN-25 ENGLISH Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See page 22 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the  or  button. 3. Adjust the selected item by pressing the ...

  • Mitsubishi WD2000 - page 26

    EN-26 T o adjust the tone of white (COLOR TEMP .): Y ou can select a preset color temperatur e (white tone) using the menu. (See page 22 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the  or  button. 3. Select your desired color temperature by pr essing the  or  button. T o cancel the menu: 4. Press th ...

  • Mitsubishi WD2000 - page 27

    EN-27 ENGLISH This projector automatically and pr operly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . In such a case, press the AUTO POSITION button. (See page 16.) When the signal is still not projected pr operly , adjust the projected image using the ...

  • Mitsubishi WD2000 - page 28

    EN-28 MENU ACCESS FEA TURE XGA60 opt. LOCK UNLOCK OK OK P ASSWORD CONFIRM O K CANCEL MENU ACCESS FEA TURE XGA60 opt. LOCK UNLOCK OK OK P ASSWORD O K CANCEL Password function This projector is equipped with the passwor d function that is designed for prevention of wr ong operation by children and r estriction on operation by other than specifi ed u ...

  • Mitsubishi WD2000 - page 29

    EN-29 ENGLISH Mouse remote contr ol By connecting to personal computer through the USB port, you can operate your computer with the pr ojector remote control. Projector + computer with USB connector Operation • Y ou can use the mouse r emote control function with a computer supporting USB only . • When the lamp is turned ON, the computer connec ...

  • Mitsubishi WD2000 - page 30

    EN-30 Supervising and controlling by computer Y ou can supervise and control the pr ojector’ s operation using a personal computer via a LAN network. • T o supervise and contr ol the projector , install the software “Mitsubishi Projector Contr ol Device Installer *” con- tained in the attached CD-ROM. For the installation procedur e and usa ...

  • Mitsubishi WD2000 - page 31

    EN-31 ENGLISH Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red ST A TUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grilles are clogged with dust or dirt. • The room ...

  • Mitsubishi WD2000 - page 32

    EN-32 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector . Contact your ...

  • Mitsubishi WD2000 - page 33

    EN-33 ENGLISH T o replace the lamp: 1. Reverse the projector gently . 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle. 5. Pull out the lamp box by the handle while holding the projector . • Pull the lamp box out of the project ...

  • Mitsubishi WD2000 - page 34

    EN-34 POWER Off Steady red Blinking red / green ST A TUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector . • Plug the power cor d into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and carry out the following. 1. T urn off th ...

  • Mitsubishi WD2000 - page 35

    EN-35 ENGLISH Images are not displayed corr ectly . Problem Projected images ar e shaking. Projected images ar e displaced. Projected images ar e distorted. Projected images ar e dark. Projected images ar e blurred. White dots are seen on projected images. Black dots are seen on projected images. Rainbow effect is seen on projected images. Fine str ...

  • Mitsubishi WD2000 - page 36

    EN-36 Problem The exhaust vents emit warm air . No audio is output. The menu can’t be used. “TEMPERA TURE!!” is displayed. The mark appears. The remote contr ol doesn’t function easily or at all. The buttons on the control panel (except for the POWER button) don’t function. Abnormal sound is heard. Images are not displayed corr ectly . (c ...

  • Mitsubishi WD2000 - page 37

    EN-37 ENGLISH Specifi cations The specifi cations and outside appearance of the pr ojector are subject to change without prior notice. *1 : Wireless LAN unit isn’ t packaged together with the projector . Replacement part (Option / Not included in the box) Spare lamp (VL T -XD2000LP) T ype Model Display T echnology Projection lens Light-source l ...

  • Mitsubishi WD2000 - page 38

    EN-38 Signal mode Resolution Horizontal V ertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60, 480i (525i) - 15.73 59.94 1024 x 768 - *1 TV50, 576i (625i) - 15.63 50.00 1024 x 768 - *1 1080i 60 (1125i 60) - 33.75 60.00 1280 x 720 - *2 1080i 50 (1125i 50) - 28.13 50.00 1280 x 720 - 480p (525p) - 31.47 59.94 1024 ...

  • Mitsubishi WD2000 - page 39

    EN-39 ENGLISH 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 - - 2 TXD IN 3 RXD OUT 4 - - 5 GND - 6 - - 7 - - 8 - - 9 - - 1 5 11 6 10 15 SERIAL (D-SUB 9-pin) Pin No. Name I/O COMPUTER/COMPONENT VIDEO IN-1 (Mini D-SUB 15-pin) Pin No. Spec. DVI-D(HDCP) (DVI-D 24-p ...

  • Mitsubishi WD2000 - page 40

    MITSUBISHI Projector Contact Information Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORA T I O N North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada ...

メーカー Mitsubishi カテゴリー Projector

Mitsubishi WD2000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WD2000の取扱説明書
- Mitsubishiの製品カード
- パンフレット
- またはMitsubishi WD2000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitsubishi WD2000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitsubishi WD2000の取り付け説明書、サービスマニュアル、簡易説明書、またはMitsubishi WD2000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitsubishi WD2000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitsubishi WD2000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitsubishi WD2000を使用するのを助ける技術的文書のことです。説明書は通常、全てのMitsubishi WD2000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitsubishiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitsubishi WD2000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitsubishi WD2000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitsubishi WD2000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitsubishi WD2000デバイスの基本機能を使うにあたってのヒント。 Mitsubishi WD2000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitsubishi WD2000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitsubishi WD2000のメーカー/サービスへの連絡先に関する情報。

Mitsubishi WD2000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitsubishi WD2000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi WD2000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)