Metz 34 AF-3 Pの取扱説明書

17ページ 0.12 mb
ダウンロード

ページに移動 of 17

Summary
  • Metz 34 AF-3 P - page 1

    TV • VIDEO • CAMCORDER • MECABLITZ MECABLITZ 34 AF-3 P Operating instructions ...

  • Metz 34 AF-3 P - page 2

    2 Foreword Dear Customer, We thank you for your confidence in our meca- blitz MB 34 AF-3P. The MB 34 AF-3P flashgun has been especially designed for Pentax AF system cameras. IMPORTANT: Never mount the flashgun in the accessory shoe of any other system camera, otherwise the flashgun’s foot or the camera’s accessory shoe can be destroyed! Th ...

  • Metz 34 AF-3 P - page 3

    3 Contents 1. Safety instructions . . . . . . . . . . . . . . . . .4 2. Preparing the mecablitz for use . . . . . . .5 2.1 Power supply . . . . . . . . . . . . . . . . . . . . . .5 2.2 Loading and replacing the batteries . . . . . .5 2.3 Automatic flashgun cut-out circuit . . . . . . .6 2.4 Mounting/Removing the mecablitz . . . . . . .6 3. Setting ...

  • Metz 34 AF-3 P - page 4

    4 1. Safety instructions • NEVER fire a flash in the immediate vicinity of the eyes! Flash fired directly in front of the eyes of a person or animal can damage the retina and lead to severe visual disorders - even blindness! • Spent batteries should be immediately remo- ved. Chemicals leaking out of spent batteries will damage the flashgun. ...

  • Metz 34 AF-3 P - page 5

    5 2. Preparing the mecablitz for use 2.1 Power supply The flashgun can only be operated with 2 CR2-type lithi- um batteries. This type of battery can be stored for many years with practically no loss of energy, thus making it ideal for occasional amateur flash photography. Batteries have become discharged or spent when recycling takes more than 6 ...

  • Metz 34 AF-3 P - page 6

    6 2. Preparing the mecablitz for use When loading the batteries ensure correct pola- rity. Incorrectly loaded batteries can destroy the flashgun! All batteries must be of the same make and have the same charge level. Exhau- sted batteries must not be thrown into the dustbin! Contribute to the protection of the environment and discard exhausted bat ...

  • Metz 34 AF-3 P - page 7

    7 3. Setting the mecablitz into operation 3.1 Preconditions The mecablitz must only be used with TTL flash controlled autofocus cameras! The sensor of TTL flash controlled cameras measures the light reaching the film through the camera lens and instantly cuts out the flash when the film has been correctly expo- sed. Please refer to the camera? ...

  • Metz 34 AF-3 P - page 8

    8 4. Flashgun instructions to the camera The mecablitz transmits different signals and messages to the camera when it is connected to the camera and is switched on. 4.1 Flash-ready indication The green light on the mecablitz illuminates when the flash capacitor is fully primed, thereby indicating flash readiness. This means that flash can be use ...

  • Metz 34 AF-3 P - page 9

    9 4. Flashgun instructions to the camera Fig. 4: Exposure o.k. 4.4 Information displayed in camera viewfinder when flash unit is switched on Displays in viewfinder Meaning prior to shutter release not illuminated Flash unit not yetready for firing or blinks slowly permanently illuminated Flash unit is ready for firing Warning with SF1/SFx: is ...

  • Metz 34 AF-3 P - page 10

    10 5. TTL flash control The mecablitz receives its information exclusively from the connected TTL-controlled AF-camera. Exposure measurement in TTL mode (TTL = t hrough- t he- l ens) is completed by the camera’s sensor. This sensor measures the light reaching the film through the camera lens. An electronic control circuit within the camera tran ...

  • Metz 34 AF-3 P - page 11

    11 6. Flash in the individual camera modes 7. Autofocus measuring flash If the mecablitz is switched on and ready for firing, a flash will be fired each time the camera's shutter is released. The amount of light is controlled by TTL. Triggering lock (only SF1 and SFx) On the Pentax SFx and SF1 cameras, the flash will not be fired when th ...

  • Metz 34 AF-3 P - page 12

    12 7. Autofocus measuring flash Notes: • The AF measuring flash is only supported in the camera's "SINGLE AF" mode. • When the camera’s autofocus system is on, the electronic circuit will automatically activate the autofocus measuring flash whenever the prevailing light is insufficient for the exposure. • The range of the a ...

  • Metz 34 AF-3 P - page 13

    13 8. Flash techniques and flash functions 8.1 Fill-in flash When in the "Program" [P] camera mode, the camera's metering system will automatically con- trol the shutter speed/aperture combination so that use of the mecablitz will soften the shadows and produce a balanced exposure when shooting against the light. However the camera ...

  • Metz 34 AF-3 P - page 14

    14 9. Lighting and attachments Your mecablitz provides full and even illumination of normal 24 x 36 mm negatives when using len- ses of 35 mm focal length and longer. A wide-angle diffuser is supplied with the flash- gun to increase the coverage if you wish to use a 28 mm wide-angle lens. A telephoto attachment (identified with a "T") i ...

  • Metz 34 AF-3 P - page 15

    15 10. Care and maintenance - T roubleshooting Remove grime and dust with a soft, dry cloth. Do not use cleaning agents as these could damage the plastic parts. Forming the flash capacitor The flash capacitor incorporated in the flashgun undergoes a physical change when the flashgun is not switched on for prolonged periods. For this reason it i ...

  • Metz 34 AF-3 P - page 16

    16 1,4 W N T W N T W N T W N T W N T W N T W N T W N T 8 11 16 22 32 45 10 14 20 28 40 56 12 17 24 34 48 67 5,5 8 11 16 22 32 7 10 14 20 28 40 8,5 12 17 24 34 48 4 5,5 8 11 16 22 5 7 10 14 20 28 6 8,5 12 17 24 34 2,8 4 5,5 8 11 16 3,5 5 7 10 14 20 4,2 6 8,5 12 17 24 2 2,8 4 5,5 8 11 2,5 3,5 5 7 10 14 3 4,2 6 8,5 12 17 1,4 2 2,8 4 5,5 8 1,8 2,5 3,5 ...

  • Metz 34 AF-3 P - page 17

    17 This table indicates a section of the most im- portant maximum lighting distances in different ISO/aperture combinations. The sticker can be applied to the back of the flashgun. Example: Film speed ISO 100, camera aperture f5.6: The table indicates a maximum distance of 5 m. The minimum lighting distance is 15% out of 5 m which equals approx. 0 ...

メーカー Metz カテゴリー Camera Flash

Metz 34 AF-3 Pのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 34 AF-3 Pの取扱説明書
- Metzの製品カード
- パンフレット
- またはMetz 34 AF-3 Pの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Metz 34 AF-3 Pの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Metz 34 AF-3 Pの取り付け説明書、サービスマニュアル、簡易説明書、またはMetz 34 AF-3 Pのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Metz 34 AF-3 Pの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Metz 34 AF-3 Pデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMetz 34 AF-3 Pを使用するのを助ける技術的文書のことです。説明書は通常、全てのMetz 34 AF-3 Pユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Metzの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Metz 34 AF-3 Pの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMetz 34 AF-3 Pの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Metz 34 AF-3 Pに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Metz 34 AF-3 Pデバイスの基本機能を使うにあたってのヒント。 Metz 34 AF-3 Pのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Metz 34 AF-3 Pに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMetz 34 AF-3 Pのメーカー/サービスへの連絡先に関する情報。

Metz 34 AF-3 Pについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMetz 34 AF-3 Pの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMetz 34 AF-3 Pで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)