Graco 239729の取扱説明書

18ページ 1.83 mb
ダウンロード

ページに移動 of 18

Summary
  • Graco 239729 - page 1

    308777L EN Instr uctions - P ar ts List 75:1 Fire-Ball ® 425 Pumps For pumping non-corrosive a nd non-abrasive greases and lubric ants only . For prof essional use only . Model No. 239729, Series B 120 lb (55 kg) drum length Model No. 239730, Series B 400 lb (180 kg) drum length Model No. 239731, Series B stubb y length 100 psi (0.7 M P a, 7 bar) ...

  • Graco 239729 - page 2

    2 308777L Contents W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mounting t he Pump . . . . . . . . . . . . . . . . . . . . . . . 5 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 T ypical Installat ion . . . . . . ...

  • Graco 239729 - page 3

    Warnings 308777L 3 Wa r n i n g s The f ollowing w ar nings are f or the setup , use , grounding, maint enance, and repair of this equipment. The e xclama- tion point symbol ale r ts you to a gener al warning and the hazard symbols ref er to procedur e-specific risks. When these symbols appear in the bod y of this manual or on warning labels, ref e ...

  • Graco 239729 - page 4

    Warnings 4 308777L EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injur y . • Do not oper ate the unit when f atigued or under the influence of drugs or alcohol. • Do not e xceed the maxi mum working pressure or t emperature r ating of the lo west r ated system com- ponent. See Te c h n i c a l D a t a in all equipment m anuals. • ...

  • Graco 239729 - page 5

    Installation 308777L 5 Installation Mounting the Pump • Selection a con v enient location f or the equipmen t to ensure easy operat or access to the pump air con- trols , sufficient room to change sup ply containers, and a secure mounting platf or m. • If you are mounting the pump dir ectly on the supply tank, position the pump so its int ake v ...

  • Graco 239729 - page 6

    Installation 6 308777L If yo u supply y our own accessories, be sure they are adequately siz ed and pressure- rated to meet the system requireme nts. Be sure the air hose is properly sized to de liver an ade- quate supply of air to the motor . See T echni cal Data on page 15. Connect a g round dispensing hose (F) to the 3/8 npt(f) pump outlet. I ns ...

  • Graco 239729 - page 7

    Operation 308777L 7 Operation Pressure Relief Pr ocedure F ollow t he Pressure Relief Proced ure whene v er yo u see this symbol. 1. Close the air regulators. 2. Close the supply pum p’ s ble ed-type master air v alve (required in this system). 3. Open the dispensin g v alve until pressure is fully relie ved. If you suspect that the dispensi ng v ...

  • Graco 239729 - page 8

    Maintenance 8 308777L Maintenance The accessory air line oiler (D) provides au tomatic air motor lubrication. F or daily man ual lubrication, disconnect the air hose , place about 15 drops of light machin e oil in the air inlet, reconnect the ho se, and turn on the air supply to blo w oil into the motor . T roub leshooting Bef ore serv icing this e ...

  • Graco 239729 - page 9

    Repair 308777L 9 Repair Ref er to F IG . 3 f or the follo wing instructions. Displacement Pump Repair Bef ore you start: • T o reduce do wntime, be sur e to hav e all necessary repair parts av ailable . Recommended sp are par ts are listed in the par ts list. • Repair kit 239734 is av ailab le. Use all new parts for best results. • The balls ...

  • Graco 239729 - page 10

    Repair 10 308777L Reassembl y 1. Hold the intak e housing (67) upright in a vise. On e at a time , place the f emale gland (74), f our leather v-pac kings (66) with the lips of t he packings f aci ng up , and the male gland ( 65) on the intak e housing. Place the gask et (62), seat ( 68), and ball (59) on the housing (6 7). 2. If the pins ( 77) wer ...

  • Graco 239729 - page 11

    Repair 308777L 11 6. Use a scre w driver to push do wn on the trip rod yok e (14) and snap the toggle assem blies (K) do wn. See F IG . 5. Remove the loc k wires (28) from th e adjusting nuts (27) of the tr ansf er valv es (M). Screw the top ad justing nuts (27) o ff . Screw the valv e stems (30) out of the g rommets (18) and lo wer adjusting nu ts ...

  • Graco 239729 - page 12

    Repair 12 308777L 7. Bef ore installing the lock wires (28) in the adjusting nuts (27) , use the special gauge, 171818, to adjust the transfer v alve (M) so there is 0. 125 inches ( 3.68 mm) clearance b etween the poppe ts (37) and the piston (5) w hen the to ggle assemblies are in the down position. 8. Snap the togg le assemblies (K) to th e up po ...

  • Graco 239729 - page 13

    Parts 308777L 13 Pa r t s 78 71 70 76 73 75 69 80 72 63 60 79 77 64 59 68 62 65 66 74 67 61 59 68 62 13 5 4 3 2 16 17 29 15 32 9 31 *37 52 8 *20 27* 28* *30 58 27* 18* 38* 42 7 33 36 6 40 53 26 56 21* 33 24 19 25 22 47 23 44 48 45 46 49 1 1 T orque to 45–55 ft–lb (61–75 N–m) 1 14 ...

  • Graco 239729 - page 14

    Parts 14 308777L Model 239729, Series B, 120 lb (55 kg) drum length Model 239730, Series B, 400 lb (180 kg) drum length Model 239731, Series B, Stubb y length Air Motor Pump ❄ P ar ts included in Kit 207385 (p urchase separately). Repair Kit 23 9734, which may be purchase d sepa- rately , includes part to ser vice the air motor throat area and th ...

  • Graco 239729 - page 15

    Technical Data 308777L 15 Te c h n i c a l D a t a . Sound Pressure Level (measured at 1 meter from unit) Sound P o wer Level (tested in accordance with ISO 9614-2) 75:1 Fi re-Ball ® 425 Pumps US Metric Fluid pressure r atio 75:1 Air pressure oper ating range 40 to 100 psi 0.3 to 0.7 MP a, 3 to 7 bar Maximum w orking pressure 7500 psi 51.7 MP a, 5 ...

  • Graco 239729 - page 16

    Technica l Data 16 308777L Dimensions 6.5” (165.1 mm) diameter 3/8 npt fluid outlet 41.25” 1048 mm 26–1 1/16” 678 mm 14–9/16” (369.9 mm) 1/2 npt(f) air inlet 6.5” (165.1 mm) diameter 3/8 npt fluid outlet 48–3/16” (1224 mm) 33–5/8” 855 mm 14–9/16” (369.9 mm) 1/2 npt(f) air inlet 06306 6.5 ” (165.1 mm) diameter 3/8 npt flu ...

  • Graco 239729 - page 17

    Mounting Hole Layout 308777L 17 Mounting Hole La y out 3 1/4” (82.6 mm) dia. two 5/16” (7.94 mm) dia. holes on 4 1/4” (108 mm) bolt circle 7/8” (22.2 mm) dia. 2–3/32” (53.18 mm) 45 ...

  • Graco 239729 - page 18

    All written and visual data con tained in th is document reflects the late st product information available at the time of pu blica tion. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/pate nts. Original instructions. This manual contains English. MM 308777 Graco Headquarters: Minneapo ...

メーカー Graco カテゴリー Heat Pump

Graco 239729のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 239729の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 239729の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 239729の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 239729の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 239729のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 239729の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 239729デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 239729を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 239729ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 239729の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 239729の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 239729に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 239729デバイスの基本機能を使うにあたってのヒント。 Graco 239729のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 239729に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 239729のメーカー/サービスへの連絡先に関する情報。

Graco 239729についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 239729の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 239729で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)