Graco Inc. 800-670の取扱説明書

24ページ 0.65 mb
ダウンロード

ページに移動 of 24

Summary
  • Graco Inc. 800-670 - page 1

    INSTRUCTIONS-P AR TS LIST 308–523 Rev A This manual contains IMPORT ANT W ARNINGS and INSTRUCTIONS READ AND RET AIN FOR REFERENCE HYDRA-CLEAN 1535, 2040 Pressure W asher  HYDRA-CLEAN 1535, 5 HP ENGINE P/N 800–670, Series A P/N 800–671, Series A 1500 psi (103 bar) OPERA TING PRESSURE 1900 psi (131 bar) MAXIMUM WORKING PRESSURE HYDRA-CLEAN 2 ...

  • Graco Inc. 800-670 - page 2

      W ARNING HIGH PRESSURE SPRA Y CAN CAUSE SERIOUS INJUR Y . FOR PROFESSIONAL USE ONL Y . OBSERVE ALL W ARNINGS. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety This pressure washer generates very high fluid pressure. Spray from the gun, leaks or ruptured component ...

  • Graco Inc. 800-670 - page 3

      EQUIPMENT MISUSE HAZARD General Safety Any misuse of the pressure washer or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and result in fluid injection, splashing in the eyes or on the skin, or other serious bodily ...

  • Graco Inc. 800-670 - page 4

    4 308-523 MOVING P ARTS HAZARD Moving parts can pinch or amputate fingers or other body parts. KEEP CLEAR of moving parts when starting or operating the pressure washer . NEVER operate the pressure washer without all guards and interlocks installed and functioning. Follow the Pressure Relief Procedure before checking or servicing the pressure washe ...

  • Graco Inc. 800-670 - page 5

      INST ALLA TION Figure 1 SPRA Y GUN SPRA Y HOSE QUICK COUPLER QUICK COUPLER INLET W A TER CONNECTION 3/4” GARDEN HOSE HIGH PRESSURE HOSE CONNECTION HIGH PRESSURE HOSE CONNECTION INLET W A TER CONNECTION 3/4” GARDEN HOSE 2040 1535 Check for Shipping Damage Check the unit for any damage that may have occurred in shipping. ...

  • Graco Inc. 800-670 - page 6

      ST ARTUP Always use this start-up procedure to ensure that the unit is started safely and properly . 1. Check oil levels. Engine: Add SAE 30 or 10W–30 weight detergent oil as necessary . Pump: Add SAE 20 or 30 weight non–detergent oil as necessary . NOTE: All units are equipped with a low–oil sensor that shuts the en ...

  • Graco Inc. 800-670 - page 7

      T rigger Safety Latch W ARNING T o reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin, AL WA YS engage the trigger safety latch whenever spraying stops, even for a moment. In the engaged position, the trigger safety latch prevents the gun from being triggered accident ...

  • Graco Inc. 800-670 - page 8

      SHUTDOWN, FLUSHING AND STORAGE W ARNING Pressure Relief Procedure T o reduce the risk of serious bodily injury , including fluid injection and splashing in the eyes, or on the skin, always follow this procedure whenever you stop spraying for more than 10 minutes, when shutting down, and before checking or repairing any par ...

  • Graco Inc. 800-670 - page 9

      TROUBLESHOOTING CHART W ARNING To reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin or injury from moving parts, always follow the Pressure Relief Procedure W arning before proceeding. PROBLEM CAUSE SOLUTION Low pressure and/or pump runs rough Partially plugged air c ...

  • Graco Inc. 800-670 - page 10

    10 308-523 P ARTS DRA WING 800–672 & 800–674 Hydra–Clean  2040 Pressure W asher 4 6 1 57 29 44 46 5 6 6 45 41 32 40 43 39 36 35 55 34 38 37 36 67 36 50 51 36 35 20 22 23 24 25 26 17 11 11 18 16 18 14 10 46 6 7 8 40 52 42 57 1 58 53 15 2 3 13 54 28 59 60 63 29 31 10 61 27 30 27 30 9 19 47 64 48 49 66 4 6 12 21 46 6 58 62 ...

  • Graco Inc. 800-670 - page 11

    11 308-523 P ARTS LIST 800–672 & 800–674 Hydra–Clean  2040 Pressure W asher REF P ART NO. NO. DESCRIPTION QTY 1 802–141 ENGINE, 8 hp, Briggs & Stratton I/C (used on 800–672 only) 1 802–998 ENGINE, 8 hp, Honda OHV (used on 800–674 only) 1 2 802–299 PUMP & GEAR REDUCER ASSEMBL Y (incl. 3, 13) 1 3 802–143 GEAR REDUCER ...

  • Graco Inc. 800-670 - page 12

    12 308-523 P ARTS DRA WING 800–670 & 800–671 Hydra–Clean  1535 Pressure W asher 8 4 58 57 55 20 12 17 11 11 18 14 10 46 6 60 63 29 31 61 30 16 1 1 9 16 18 47 64 48 49 6 6 7 54 3 2 15 6 67 65 66 58 55 57 33 44 46 6 6 45 41 32 39 36 35 34 38 37 36 67 36 50 51 36 35 40 52 4 6 40 43 42 53 59 22 23 24 25 26 21 46 56 ...

  • Graco Inc. 800-670 - page 13

    13 308-523 P ARTS LIST 800–670 & 800–671 Hydra–Clean  1535 Pressure W asher REF P ART NO. NO. DESCRIPTION QTY 1 803–239 ENGINE, 5 hp, Briggs & Stratton I/C (used on 800–670 only) 1 803–264 ENGINE, 5 hp, Honda OHV (used on 800–671 only) 1 2 802–300 PUMP & GEAR REDUCER ASSEMBL Y (incl. 3, 13) 1 3 802–266 GEAR REDUCER ...

  • Graco Inc. 800-670 - page 14

    14 308-523 GEAR REDUCER SERVICE (Model 1535) W ARNING To reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin or injury from moving parts, always follow the Pressure Relief Procedure W arning on page 2 before proceeding. Replacing the O–Ring (5) 1. Remove the four bolts, lockwashers and washer ...

  • Graco Inc. 800-670 - page 15

    15 308-523 P ARTS DRA WING 802–266 Gear Reducer (Model 1535) 20 19 8 9 6 14 13 12 11 10 18 8 17 16 15 5 4 2 1 3 7 P ARTS LIST 802–266 Gear Reducer (Model 1535) REF P ART NO. NO. DESCRIPTION QTY 1 802–350 GASKET 1 2 802–351 COVER, Mounting 1 3 802–334 SCREW , Set 1 4 802–352 GEAR, Pump 1 5 802–353 O–RING 1 6 801–659 DIPSTICK 1 7 80 ...

  • Graco Inc. 800-670 - page 16

    16 308-523 GEAR REDUCER SERVICE (Model 2040) W ARNING To reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin or injury from moving parts, always follow the Pressure Relief Procedure W arning on page 2 before proceeding. Replacing the Gasket (9) NOTE: T o maintain a good seal, the gasket must be ...

  • Graco Inc. 800-670 - page 17

    17 308-523 P ARTS DRA WING 802–143 Gear Reducer (Model 2040) 1 2 3 4 21 20 5 6 7 8 9 19 12 18 17 15 16 12 13 10 14 11 P ARTS LIST 802–143 Gear Reducer (Model 2040) REF P ART NO. NO. DESCRIPTION QTY 1 802–332 O–RING 1 2 802–333 COVER, Mounting 1 3 802–334 SCREW , Set 1 4 802–335 GEAR, Pump 1 5 802–336 GEAR, Engine 1 6 802–337 RING, ...

  • Graco Inc. 800-670 - page 18

    18 308-523 P ARTS DRA WING 802–265 Pump Assembly , 1500 psi 14 13 12 14 1 3 2 31 33 32 34 35 36 38 39 40 41 28 42 43 15 16 17 12 18 19 20 21 22 23 24 22 45 21 44 19 18 47 48 10 9 11 52 49 51 50 37 25 26 29 27 28 30 10 9 8 7 6 5 4 11 ...

  • Graco Inc. 800-670 - page 19

    19 308-523 P ARTS LIST 802–265 Pump Assembly , 1500 psi REF P ART NO. NO. DESCRIPTION QTY 1 802–319 MANIFOLD 1 2 801–651 SCREW , Cap, socket hd. 8 3 801–652 W ASHER, Lock 8 4 KIT 1 O–RING 5 KIT 1 SEA T , V alve 6 KIT 1 PLA TE, V alve 7 KIT 1 SPRING 8 KIT 1 GUIDE, V alve 9 KIT 4 O–RING 10 KIT 4 CAP 11 KIT 1 VA L VE ASSEMBL Y 12 KIT 27, 1 ...

  • Graco Inc. 800-670 - page 20

      P ARTS DRA WING 803–405 Pump Assembly , 2000 psi 46 47 44 45 10 9 8 7 6 5 4 1 3 2 10 9 11 52 51 54 53 40 15 41 14 39 12 21 23 22 24 26 33 32 28 29 30 31 27 25 34 35 36 31 37 38 11 43 42 16 17 44 45 13 14 18 19 20 12 50 49 ...

  • Graco Inc. 800-670 - page 21

    21 308-523 P ARTS LIST 803–405 Pump Assembly , 2000 psi REF P ART NO. NO. DESCRIPTION QTY 1 801–467 MANIFOLD 1 2 801–468 SCREW , Cap, hex hd. 8 3 801–469 W ASHER, Lock 8 4 KIT 1 O–RING 5 KIT 1 SEA T , V alve 6 KIT 1 PLA TE, V alve 7 KIT 1 SPRING 8 KIT 1 GUIDE, V alve 9 KIT 4 O–RING 10 KIT 4 CAP 11 KIT 1 VA L VE ASSEMBL Y 12 803–283 SC ...

  • Graco Inc. 800-670 - page 22

      PUMP SER VICE W ARNING T o reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always follow the Pressure Relief Procedure W arning before proceeding. NOTE: The following metric wrenches are needed: M10, M13 and M30. Repair kits are ava ...

  • Graco Inc. 800-670 - page 23

      Servicing the V–Packings NOTE: There are two types of packing kits: one is just packings only , the other includes the packings, rings and retainers. 1. Remove the manifold as outlined in the Pumping Section. 2. Carefully pull the packing retainer from the manifold. Examine the o–ring and replace it if it is cut or ...

  • Graco Inc. 800-670 - page 24

    24 308-523 THE GRACO W ARRANTY W ARRANTY AND DISCLAIMERS Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty , Graco will, for a perio ...

メーカー Graco Inc. カテゴリー Pressure Washer

Graco Inc. 800-670のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 800-670の取扱説明書
- Graco Inc.の製品カード
- パンフレット
- またはGraco Inc. 800-670の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco Inc. 800-670の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco Inc. 800-670の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco Inc. 800-670のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco Inc. 800-670の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco Inc. 800-670デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco Inc. 800-670を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco Inc. 800-670ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Graco Inc.の取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco Inc. 800-670の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco Inc. 800-670の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco Inc. 800-670に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco Inc. 800-670デバイスの基本機能を使うにあたってのヒント。 Graco Inc. 800-670のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco Inc. 800-670に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco Inc. 800-670のメーカー/サービスへの連絡先に関する情報。

Graco Inc. 800-670についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco Inc. 800-670の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco Inc. 800-670で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)