日本語 dropdown-ico

Metz 44 AF-4の取扱説明書

31ページ 1.01 mb
ダウンロード

ページに移動 of 31

Summary
  • Metz 44 AF-4 - page 1

    MECABLITZ 44 AF-4 /4i N Bedienungsanleitung Mode d’emploi Gebruiksaanwijzing Operating instruction Manuale istruzioni Manual de instrucciones ...

  • Metz 44 AF-4 - page 2

    68 ķ 1. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 T able 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 2. Preparing the flash unit for use . . . . . . . . . . . . . . . . . . . . . . . . .71 2.1 Mounting the flash unit . . . . . . . . . . . . . . . . . . . ...

  • Metz 44 AF-4 - page 3

    69 ķ Foreword W e congratulate you on purchasing this flash unit and thank you for your confidence in Metz products. It is only natural that you should want to use your flash unit straight away . However , we recommend that you study these Operating Instructions before- hand to be able to fully exploit and utilize all the capabilities offered. Thi ...

  • Metz 44 AF-4 - page 4

    ķ 70 Dedicated flash functions Dedicated flash functions are flash functions that have been specifically adapted to a given camera system. The supported flash functions depend on the type of the camera used. The following dedicated flash functions are supported by the flash unit: • Flash-ready indication in camera’ s viewfinder • Correct exp ...

  • Metz 44 AF-4 - page 5

    71 ķ 2. Preparing the flash unit for use 2.1 Mounting the flash unit 2.1.1 Mounting the flash unit on the camera T urn off the camera and the flash unit by their main switch! • T urn the knurled nut against the flash unit’ s housing until the stop point is reached. The locking pin in the adapter shoe is now fully retracted into the case. • S ...

  • Metz 44 AF-4 - page 6

    72 ķ 2.4 Auto-OFF for the flash unit (Fig. 2) T o save batter y power and prevent inadvertent batter y discharge, the flash unit is factor y-set to automatically switch-over to standby mode (Auto-OFF), while flash readiness and the LC display are simultaneously switched off, approx. 3 minutes after: • Switch-on • Firing a flash • Actuating t ...

  • Metz 44 AF-4 - page 7

    73 ķ As soon as the above settings have been made you can start shooting flash pictures when flash readiness is indicated (see 5.1). 4. Operating modes of the flash unit 4.1 TTL flash mode (Fig. 3) The TTL flash mode is a ver y simple way to achieve excellent flash shots. In this mode exposure readings are taken by a sensor built into the camera w ...

  • Metz 44 AF-4 - page 8

    74 ķ When using Group A cameras (see T able 1), the matrix-controlled TTL fill-in flash mode is set on the camera or is automatically activated (see operating instructions of the camera). In this instance there is no setting or display on the flash unit. When using Group B cameras (see T able 1), the matrix-controlled TTL fill-in flash mode is set ...

  • Metz 44 AF-4 - page 9

    75 ķ 4.2 D-TTL flash mode This flash mode is only possible in conjunction with digital Nikon SLR cameras of Group D (see T able 1). Digital SLR cameras do not suppor t the normal TTL flash mode of analog cameras. The D-TTL flash mode is an advanced variant of the normal TTL flash mode of analog cameras. Prior to shooting a series of weakly visible ...

  • Metz 44 AF-4 - page 10

    76 ķ 4.3.1 i-TTL BL flash mode In this mode with i-TTL flash control (see above) the camera additionally takes into account data relating to the flash-to-subject distance. This flash mode is only possible in conjunction with “ D-AF Nikkor lenses “. Some cameras do not suppor t the i-TTL BL flash mode for SPOT exposure metering. This flash mode ...

  • Metz 44 AF-4 - page 11

    77 ķ The setting becomes immediately effective. After approx. 5 sec. the LC dis- play returns to its normal state. If the camera is used with a CPU lens, then EV will flash alongside the aper- ture symbol on the flash unit’ s LC display to indicate that a manual correction value has been set for flash exposure. If the camera is used with a lens ...

  • Metz 44 AF-4 - page 12

    78 ķ Setting procedure for the manual flash mode M • T urn on the flash unit by its main switch. • Continue depressing the “Mode” key until “M” flashes on the LC display . • The setting becomes immediately effective. The LC display retur ns to its nor- mal state after approx. 5 sec. 4.7.2 MLo manual flash mode with par tial light out ...

  • Metz 44 AF-4 - page 13

    79 ķ 4.9 Flash synchronisation 4.9.1 Normal synchronisation (Fig. 7) In normal synchronisation the flash unit is triggered at the beginning of the exposure time (1st curtain synchronisation). Nor mal synchronisation is the standard mode on all cameras, and is suitable for most flash shots. Depend- ing upon the given mode, the camera is changed ove ...

  • Metz 44 AF-4 - page 14

    80 ķ 4.9.3 Slow synchronisation / SLOW In certain operating modes, some cameras per mit slow flash synchronisation (“SLOW”) which will provide added prominence to the background at lower ambient light levels. This is achieved by matching the shutter speed to the ambient light. Accordingly , shutter speeds slower than the flash sync speed (e.g. ...

  • Metz 44 AF-4 - page 15

    81 ķ only be displayed after the flash unit has received the corresponding data from the camera. Auto Zoom, aper ture and maximum flash range are only displayed in conjunction with Group B, C, D and E cameras (see T able 1) if these are fitted with an AF lens or a lens with CPU. 5.4.1 Maximum flash range indication in TTL flash mode The flash unit ...

  • Metz 44 AF-4 - page 16

    82 ķ 5.4.7 Meter-Feet changeover (m - ft) The maximum flash range indicated by the flash unit’ s LC display can be either in meter (m) or feet (ft). T o change between the two, proceed in the fol- lowing manner: • T urn off the flash unit by its main switch. • Keep the “Select” key combination depressed (= “Mode” key + “Zoom” key ...

  • Metz 44 AF-4 - page 17

    83 ķ 5.7.1 “Auto Zoom” If the flash unit is operated with a Group B, C, D or E camera with CPU lens, its zoom reflector position will be automatically adapted to the focal length of the lens. When the flash unit is turned on, the LC display will indicate “Auto Zoom” and the current reflector position. Automatic reflector adaptation commenc ...

  • Metz 44 AF-4 - page 18

    84 ķ 5.7.4 Extended zoom mode The extended zoom mode (Ex) reduces the focal length setting of the flash unit by one step as compared to the focal length of the camera lens! The resulting wider light coverage inside rooms provides additional stray light (reflections) to achieve a softer flash illumination. Example of extended zoom mode: The focal l ...

  • Metz 44 AF-4 - page 19

    85 ķ 5.9 Preflashes for red-eye reduction Red eyes are always the result of a physical effect. It arises whenever a per- son looks more or less straight into the camera , the ambient light is relatively dark, and the flash unit is mounted on or directly next to the camera. The flash unit illuminates the back of the eyes, revealing the blood-filled ...

  • Metz 44 AF-4 - page 20

    86 ķ 6. Special remarks concerning the cameras The multitude of camera models and their features make it impossible to de- tail all camera-specific capabilities, settings, displays, etc. For more details concerning the operation of a flash unit please refer to the corresponding chapters in the operating instructions for the given camera! 6.1 Speci ...

  • Metz 44 AF-4 - page 21

    87 ķ 8. Advice in the event of a fault Should the LC display indicate meaningless information or should the flash unit not work properly in the individual modes, then switch off the flash unit for about 10 seconds by its main switch. Check the camera settings and find out if the flash unit’ s foot is correctly mounted in the camera’ s accessor ...

  • Metz 44 AF-4 - page 22

    88 ķ 10. T echnical data Maximal guide number at ISO 100/21 ° , 105 mm zoom: In the metric system: 44; in the imperial system: 144 Flash durations: Approx. 1/200th to 1/20,000th sec. (in TTL mode) In M mode approx. 1/200th sec. at full light output In MLo mode approx. 1/200th sec. Colour temperature: approx. 5600 K Film speed: ISO 6 to ISO 6400 S ...

  • Metz 44 AF-4 - page 23

    134 ISO Zoom 24 28 35 50 70 85 105 6/9° 5,9 6,4 6,9 8,3 9,3 10 11 8/10° 6,6 7,4 7,9 10 11 12 12 10/11° 7,4 8,2 8,9 11 12 13 14 12/12° 8,4 9,0 10 12 13 15 15 16/13° 9,4 10 11 14 15 17 18 20/14° 10 12 13 15 17 19 20 25/15° 11 13 14 17 19 21 22 32/16° 13 15 16 19 21 24 25 40/17° 14 16 18 22 24 27 28 50/18° 16 18 20 24 27 30 31 64/19° 18 21 ...

  • Metz 44 AF-4 - page 24

    135 44 AF-02 Betriebsartenwahl Sélecteur de mode Functieschakelaar Mode selector Selettore del modo di funzionamento Selección de modos de funcionamiento Handauslösetaste und Blitzbereitschaftsanzeige Bouton d’essai et témoin de recyclage Ontspanknop voor handbediening en flitsaparaat-aanduiding Manual firing button and flash-ready indicator ...

  • Metz 44 AF-4 - page 25

    136 44 AF-03 Batteriefachdeckel Couvercle du compartiment des piles Deksel batterijvak Batter y compartment lid Coperchio del vano batteria T apa del compartimento de pilas Entriegelungsknopf Hauptreflektor Bouton de déverrouillage pour réflecteur Ontgrendelingsknop Hoofdreflector Unlocking button for the main reflector Pulsante di sblocco della ...

  • Metz 44 AF-4 - page 26

    137 44 AF-3C AF-Messblitz Illuminateur AF AF-meetflits AF measuring beam Illuminatore di assistenza AF Destello de medición AF Rändelmutter Écrou moleté Kartelmoer Knurled nut Dato zigrinato T uerca moleteada ...

  • Metz 44 AF-4 - page 27

    Bild 1 / Fig. 1 / Afb. 1 / Grab. 1 Bild 2 / Fig. 2 / Afb. 2 / Grab. 2 m Bild 3 / Fig. 3 / Afb. 3 / Grab. 3 Sensor Senseur Sensor Sensore Bild 4 / Fig. 4 / Afb. 4 / Grab. 4 ...

  • Metz 44 AF-4 - page 28

    Bild 5 / Fig. 5 / Afb. 5 / Grab. 5 Bild 6 / Fig. 6 / Afb. 6 / Grab. 6 Bild 7 / Fig. 7 / Afb. 7 / Grab. 7 Bild 8 / Fig. 8 / Afb. 8 / Grab. 8 ...

  • Metz 44 AF-4 - page 29

    140 ✍ ✍ ...

  • Metz 44 AF-4 - page 30

    Hinweis: Im Rahmen des CE-Zeichens wurde bei der EMV-Prüfung die korrekte Belichtung ausgewertet. Kontakte nicht berühren ! In Ausnahmefällen kann eine Berüh- rung zur Beschädigung des Gerätes führen. Ķ Remarque: L ’exposition correcte a été évaluée lors des essais de CEM dans le cadre de la certification CE. Ne pas toucher les contac ...

  • Metz 44 AF-4 - page 31

    704 47 0080.A1 Ķĸńķƴį Consumer electronics Photoelectronics Plastics technology Industrial electronics Metz - W erke GmbH & Co KG • Postfach 1267 • D-90506 Zirndorf • info@metz.de • www .metz.de Metz. Always first class. ...

メーカー Metz カテゴリー Camera Flash

Metz 44 AF-4のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 44 AF-4の取扱説明書
- Metzの製品カード
- パンフレット
- またはMetz 44 AF-4の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Metz 44 AF-4の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Metz 44 AF-4の取り付け説明書、サービスマニュアル、簡易説明書、またはMetz 44 AF-4のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Metz 44 AF-4の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Metz 44 AF-4デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMetz 44 AF-4を使用するのを助ける技術的文書のことです。説明書は通常、全てのMetz 44 AF-4ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Metzの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Metz 44 AF-4の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMetz 44 AF-4の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Metz 44 AF-4に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Metz 44 AF-4デバイスの基本機能を使うにあたってのヒント。 Metz 44 AF-4のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Metz 44 AF-4に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMetz 44 AF-4のメーカー/サービスへの連絡先に関する情報。

Metz 44 AF-4についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもMetz 44 AF-4の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMetz 44 AF-4で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)