Buhler 595の取扱説明書

34ページ 2.61 mb
ダウンロード

ページに移動 of 34

Summary
  • Buhler 595 - page 1

    ...

  • Buhler 595 - page 2

    PRINTED IN CANADA WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted fo r a period of twelve (12) months from original date of purchase, by original purchaser, to be free fr om defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligati ons under thi ...

  • Buhler 595 - page 3

    595 Hydraulic Farm Loader Operator’s Manual Table of Contents Section Introduction and Identification Safety and Pre-use Information Operating Information Assembly and Parts Information Description Page Warranty Registra tion and Po licy ............................................ Table of C ontents .............................................. ...

  • Buhler 595 - page 4

    ...

  • Buhler 595 - page 5

    3 Pre-delivery Check List Before delivering this equipment pleas e complete the following check list. 1. The loader has been installed using the appr opriate mounting kit for the tractor and loader. 2. The hydraulic system installed is appropriate for the tractor and loader 3. The loader is properly installed. 4. All bolts are tightened to the torq ...

  • Buhler 595 - page 6

    4 Loader Identification Diagram (HSL Model Shown) For further details refer to Loader Mainframe and Subframe diagrams. ...

  • Buhler 595 - page 7

    5 Hydraulic (Hose Kit) Identification Diagrams Hose Kit “A” Loader Powered by the tractor remotes. Consists of four hoses leading from loa der tubing to tractor remote couplers Hose Kit “C” Loader operated by an external valve that is plumbed into the tractor hydraulic syste m. Consists of 4 hoses leading from loader tubing to external moun ...

  • Buhler 595 - page 8

    6 Safety • Never work beneath raised loader unless it is securely supported. The following are instructions for the Lift Lock Supports; -DO NOT USE WHEN TRAC TOR IS MOVING. -DO NOT STORE LIFT LOCK SUPPORTS OTHER THAN WHERE INDICATED. -REPLACE IMMEDIAT ELY IF DAMAGED . -THE BUCKET MU ST BE EMPT Y -ALWAYS USE BOTH SUPPOR TS TO DISENGAGE SUPPORTS: 1 ...

  • Buhler 595 - page 9

    7 Important Precautions ROLL-OVER HAZARD To prevent serious injury or death: Move and turn tractor at low speed. Carry load no higher than necessary to clear the ground when transporting. Add wheel ballast or rear weight for stability. Move wheels to widest possible settings to increase stability. It is recommended the tractor be equipped with a ro ...

  • Buhler 595 - page 10

    8 Safety Decals These decals are located as sh own on the De ca l Location diagram and the Sub-Frame A sse mbly diagram. 1. Read Operator's Manual before operating. 2. Move and turn tractor at low speed. 3. Carry loader arms at a low position during transport. 4. Lower loader arms, sto p engine and lock brakes before leaving operator seat. 5. ...

  • Buhler 595 - page 11

    ...

  • Buhler 595 - page 12

    10 General Instructions and Information As with any piece of equipment, the care wi th which your loader is operated and maintained will greatly affect it’s life and t he safety of the people using it. 1. Keep all pivots well lubricated for longer bus hing life. Inspect every 500 hours of operation for wear. 2. Periodically check all bolts for ti ...

  • Buhler 595 - page 13

    11 Operation and Maintenance GENERAL Refer to tractor Operator’s Manual for Operating information on the tractor’s hydraulic system. Hydraulic systems using aux iliary valves should have them located for easy reach from the tractor seat. Hoses should be connected in such a manner that pushing forward on valve handles lowers the boom or dumps th ...

  • Buhler 595 - page 14

    12 Operating Suggestions for Loading When handling heavy loads, be sure to lower lift arms slowly. This is known as feathering the hydraulic lever. If load is lowered too fast and stopped suddenly, excessive shock loads are created which can damage loader or tractor. When loading bucket, drive straight into material. Attempting to turn tractor whil ...

  • Buhler 595 - page 15

    13 Operating Suggestions For Backfilling DO THIS! When backfilling approa ch pile with a flat bucket. Leave dirt in bucket. Dumping on each pass wastes time. NOT THIS! DO NOT use bucket in dumped position for bulldozing. This will only impose severe shock loading on the bucke t cylinders and make it more difficult to maintain a level grade. Backgra ...

  • Buhler 595 - page 16

    14 Attaching the Loader to Your Tractor 1. Position the tractor as centrally as possib le and drive, using lowest gear possible , into the loader frame until hoses can be co nnected. 2. Couple up the hydraulic hose lines to the load er or tractor valve ensuring p ro pe r function (see Operator and Maintenance Section ) NOTE: When mounting the loade ...

  • Buhler 595 - page 17

    15 Attaching the Loader to Your Tractor (Continued) 6. When the hook is lined up, dump or roll back the bucket to lower or raise the su bframe upright to align with the mounting boot. 7. Continue to drive the tractor forward until the subframe upright s are seated in the boot. 8. Secure the subframe uprights with the bolts an d washers. Torque to 5 ...

  • Buhler 595 - page 18

    16 Removing the Loader from Your Tractor WARNING! When rem oving the loader, it m ust be fitted with a bucket or other suitable attachment to give the frame stability after remov al. If this is not done, the frame will not remain standing. IMPORTANT! Al ways remove the loader on firm, level ground (a way from children’s play areas and high traffi ...

  • Buhler 595 - page 19

    17 Removing the Loader from Your Tractor (Continued) 4. Roll back the bucket slightly and simulta neou sly extend or retract the lift cylinders to free hooks from spools. Then sl owly back up the tractor. 5. Once the subframe is clear of the boot and the hook is cle ar of the mounting boss, roll back the bucket all the way. This ra ises the rear up ...

  • Buhler 595 - page 20

    PROBLEM POSSlBLE CAUSE REMEDY Loader slow and/or will not dump. Quick couplers leaking. Check connections and compatibility or replace. Hydraulic oil too heavy. Change or replace filter. Oil filter plugged. Clean or replace filter. Hydraulic pump worn. Repair or replace pump. Oil line restricted or leaking. Check all hoses and tubes for leaks, dama ...

  • Buhler 595 - page 21

    19 General Notes and Instructions to the Operator Regarding ALLIED TSL Loader Operations 1. The true self levelling system (TSL) utilizes mechanical linkages to maintain bucket level while raising and lowering. The pivot plate weldment, levelling tubes and linkages have been developed to ensure that the bucket remains at the sa me position througho ...

  • Buhler 595 - page 22

    ...

  • Buhler 595 - page 23

    Item Part No. Description Regular Quantity TSL Quantity S595 Quantity S595 TSL Quantity 1 25440 595 Sub Frame Weldment Left 1 - 2 25441 595 Sub Frame Weldment Right 1 -- - 1 25457 595 S Sub Frame Weldment Right - - 1 - 2 25458 595 S Sub Frame Weldment Left - - 1 - 3 110959 Hook Weldment 2 2 2 2 4 112747 Plate Clamp 2 2 2 2 5 112746 Spacer Block 4 4 ...

  • Buhler 595 - page 24

    ...

  • Buhler 595 - page 25

    Item Part No. Description 595 595 S 1 25442 595 Main Frame Weldment 1 - 1 25443 595 S Main Frame Weldment - 1 2 24296 Quick Attach Weldment Left 1 1 3 24297 Quick Attach Weldment Right 1 1 4 112798 Tube Cross Qtach 2 1 5 108827 Pin Weldment 2 2 6 111231 Stand Weldment 2 2 7 113114 Strap Stand 2 2 8 24329 Wrench Mounting 1 1 9 110907 Pin 0.625 Dia. ...

  • Buhler 595 - page 26

    ...

  • Buhler 595 - page 27

    Item Part No. Description 595 TSL S595 TSL 1 24729 595 TSL Mainframe 3.0 DIA. Lift 1 - 1 24737 S595 TSL Mainframe 3.0 DIA. Lif t -1 2 24717 Quick Attach Left 1 1 3 24716 Quick Attach Right 1 1 4 112798 Cross Tube 1 1 5 108827 Pin Weldment 2 2 6 114296 Stand Tube 2 2 7 114303 Stand foot 2 2 8 113690 Link Spacer 2 2 9 110907 Stand Pin 0.625 diamete r ...

  • Buhler 595 - page 28

    26 595, S595 Hydraulic Plumbing Diagram ...

  • Buhler 595 - page 29

    Item Part No. Description Qty. 1 24458 2.5 Dia. X 20.63 Cyl. Assy. Bucket 2 2 24454 2.5 Dia. X 28.50 Cyl. Assy. Lift 2 3 812973 3/8 x 12" Hose 3/4 MORB x 3/4 SWFJIC 2 4 811754 3/8 x 18" Hose 3/4 MORB x 3/4 SWFJIC 2 5 812703 3/8 x 22" Hose 3/4 MORB x 3/4 SWFJIC 2 6 812947 3/8 x 22" Hose 3/4 SWFJIC x 3/4 SWFJIC 2 7 113222 Tubing - ...

  • Buhler 595 - page 30

    ...

  • Buhler 595 - page 31

    Item Part No. Description 3.0 Dia. C yl. Quantity 1 24726 3.0 DIA x 22.0 Cyl. Assy. Bucket 2 2 24408 3.0 DIA x 28.5 Cyl. Assy. Lift 2 3 812069 Tee 3/4-16MJIC X 3/4-16 MJIC 8 4 811414 Elbow 90º 3/4-16 MORB to 3/4 MJIC 2 5 812128 Elbow 90º 3/4 MJIC x 3/4 MJIC 2 6 11362 Pipe Clip 9 7 113031 Tubing Ext. Lift Cyl 23.0" 2 8 114114 Tubing Lift Cyl. ...

  • Buhler 595 - page 32

    30 595, S595, 595TSL, S595TSL Hydraulic Cylinder Assembly Bucket Cylinders Bucket Cylinders TSL Bucket Cylinders Lift Cylinders Lift Cylinders Diameter 2.50" 3.00" 3.00” 2.50" 3.00" Length of Stroke 20.63" 20.63" 22.00” 28.50" 28.50" Retracted Length 33.00" 33.00" 47.50" 38.00" 38.00&q ...

  • Buhler 595 - page 33

    ...

  • Buhler 595 - page 34

    Buhler Manufacturing “ a partnership” 1260 Clarence Ave Winnipeg, MB. R3T 1T2 Ph.: (204) 661-8711 Fax: (204) 654-2503 www.buhler.com Printed in USA Allied Division 1260 Clarence Ave Winnipeg, MB. R3T 1T2 Ph.: (204) 661-8711 Fax: (204) 654-2503 Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 I ...

メーカー Buhler カテゴリー Washer

Buhler 595のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 595の取扱説明書
- Buhlerの製品カード
- パンフレット
- またはBuhler 595の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Buhler 595の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Buhler 595の取り付け説明書、サービスマニュアル、簡易説明書、またはBuhler 595のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Buhler 595の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Buhler 595デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBuhler 595を使用するのを助ける技術的文書のことです。説明書は通常、全てのBuhler 595ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Buhlerの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Buhler 595の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBuhler 595の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Buhler 595に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Buhler 595デバイスの基本機能を使うにあたってのヒント。 Buhler 595のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Buhler 595に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBuhler 595のメーカー/サービスへの連絡先に関する情報。

Buhler 595についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBuhler 595の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBuhler 595で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)