JVC TK-C215V12の取扱説明書

32ページ 2.54 mb
ダウンロード

ページに移動 of 32

Summary
  • JVC TK-C215V12 - page 1

    DOME CAMERA TK-C215V4 TK-C215V12 INSTR UCTIONS (A) For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future referen ce. Model No . TK-C215V4/TK-C215V12 Serial No. * TK-C215V4 is used in the above illustration. LST0420-001B TK-C215V4_V12_EN.boo k Page 1 Wednes day, August 2, 2006 1:18 PM ...

  • JVC TK-C215V12 - page 2

    2 Intr oduction Safety Precautions CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION FOR USA AND CANADA Information for Users on Disposal of Old Equipment Attention: This symbol is only valid in the ...

  • JVC TK-C215V12 - page 3

    3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only . 䢇 This installation should be made by a qu alified service person and should conform to all local c ...

  • JVC TK-C215V12 - page 4

    4 Intr oduction These are general IMPORT ANT SAFEGU ARDS and certain items may not apply to all appliances. 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not u ...

  • JVC TK-C215V12 - page 5

    5 Intr oduction Safety P recautions ......................................... 2 Contents ......................................................... 5 Characteristics ............................................... 6 Operating Precautions ................................... 7 Name of P ar ts ........................................ ........ 8 Camera. ...

  • JVC TK-C215V12 - page 6

    6 Intr oduction Thank you f or purchasing this product. (These instructions are for: TK-C215V4U/TK-C215V12U.) Before beginning to oper ate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained. 䡵 Realizing a Hi gh Picture Quality This camera realizes 540 TV lines and S/N50 d ...

  • JVC TK-C215V12 - page 7

    7 䢇 T o sav e energy , when it is not being used turn the system’ s power off. 䢇 This camera has been designed f or indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the follo wing places. ● In a place exposed to rain or moisture . ● In a place with v apor or oil soot, f or example in a kitchen. ● In a temp ...

  • JVC TK-C215V12 - page 8

    8 Intr oduction Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the electrical box. ( A pg. 22) B Mounting h ole (rou nd) x 4 Use these when mounting the camera to the ceiling or wall. ( A pg. 18, 20) C Outer Case Use this in the follo wing cases: ● When mounting the camera directly to the ceiling or on the wall. ( ...

  • JVC TK-C215V12 - page 9

    9 Camera (Interior) The dome cov er , inner dome and outer case are removed. Procedures for remo val. ( A pg. 18 A Embedding the camera to the ceiling B , Step 3. to Step 5. ) K Strap A plate to connect the camera unit and the dome cov er . L Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera. This ...

  • JVC TK-C215V12 - page 10

    10 Intr oduction Set the video setting switches on the camer a unit before mounting it. T o set the switches, use a fine-tipped scre wdr iver . A [RESET/SPO T] RESET/SPO T button When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue. ● When the 2 [SELECT] switch is set to WHT .BAL., ...

  • JVC TK-C215V12 - page 11

    11 4. [WHT .BAL.] A TW/MANU AL selection switch. For selecting whether to adjust the white balance automatically or manually . When the setting is changed from manual to A TW , the settin g values in the manual mode will be reset. The camera s witches to the same mode as with pressing the [RESET] button. (Default setting: A TW) NO TE: ● The white ...

  • JVC TK-C215V12 - page 12

    12 Intr oduction Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped screwdriver . A [IRIS LEVEL] Iris level adjustment For adjusting the le vel of the automatic aper ture control lens. This adjustment only needs to be made when required. Use t his to accommodate par ticular shooting condi ...

  • JVC TK-C215V12 - page 13

    13 2. [SELECT] WHT .BAL./PHASE setting switch. WHT .B AL.: The F [R/B, +/ - ] b uttons are used as [R/B] adjustment buttons . PHASE: The F [R/B, +/ - ] b uttons are used as [+/ - ] adjustment buttons . (Default setting: WHT .BAL.) 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : T ...

  • JVC TK-C215V12 - page 14

    14 Installati on and connection The maximum connection distance varies with the type of cable used. Please refer carefully to the table f or each cable during conn ection. * Be sure to turn off th e power of de vices before connecting cables. Video signal cables Connect the coaxial cables (BNC) to the video signal output connector (BNC). DC 12 V or ...

  • JVC TK-C215V12 - page 15

    15 Electrical Spe cifications of Alarm In put T erminals (TK-C215V12 only) ● T o prevent penetr ation of noise in the internal circuitry , apply a non-voltage contact signal to the ALARM input terminal. N ev er apply a voltage . ● Apply an alarm signal for at least 200 ms. If it is shor ter , it is not guaranteed that the signal will be recogni ...

  • JVC TK-C215V12 - page 16

    16 Installati on and connection NO TE: ● T ur n OFF the power supply to all equipment to be used before making connections . ● Read the Instruct ion Manual f or each piece of equipment to be used before making connections. NO TE: ● P ower consumption of TK-C215V4/TK- C215V12 are different from one another . When installing a mixture of these ...

  • JVC TK-C215V12 - page 17

    17 Getting Started CA UTION: ● When mounting the camera to the ceiling, ensure to wear saf ety glasses to protect the eye from any f alling object. ● Attachment of a embedded cover in the ceiling (recess brack et) may be mandatory in cer tain regions. If this is so , ensure that the embedded cov er (recess brack et) is securely attached before ...

  • JVC TK-C215V12 - page 18

    18 Installati on and connection Embedding the camer a to the ceilin g * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm , 4 3/4 inches) 2. Draw the fall pre vention wire mounted to the ceiling slab and the cable ou t from the ceiling in adv ance . CA UTION: ● Select a su ...

  • JVC TK-C215V12 - page 19

    19 䡵 Connecting 1. Attach the fall prevention wire to th e camera, followed b y attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cab le . ( A pg. 14) Lower the co ver and connect the connectors . Upon connecting, cover the connectors using the protection cover . 3. Connect the input po wer suppl ...

  • JVC TK-C215V12 - page 20

    20 Installati on and connection When mounting the camera directly to the ceiling or on th e wall When mounting to a wall, replace areas in dicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm , 1 1/8 inches) Make us e of the template sup plied to open a ho le. 2. Draw the fall pre vention wire ...

  • JVC TK-C215V12 - page 21

    21 4. Connect the video signal cab le . ( A pg. 14) Lower the protection co ver and connect the connectors. Upon connecting, restore the protection cov er to cover the connectors . 5. Connect the input po wer supply cab le . ( A pg. 16) 6. Connect the alarm cable.(TK-C215V12 onl y) ( A pg. 15) 7. Wrap insulation ta pe around cables. 䡵 Mounting 1. ...

  • JVC TK-C215V12 - page 22

    22 Installati on and connection When mounting t h e camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please ref er to local building codes for bo x type to use for lo w-voltage wiring. 䡵 Connecting 1. Align j with the shootin g direction when mounting the cover to the electrical box. 2. Follow steps 2 to 7 of ...

  • JVC TK-C215V12 - page 23

    23 Adjusting Im age Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and fo cus. * The power to the camera body must be ON when adjustments are performed. Adjusting the camera direc ...

  • JVC TK-C215V12 - page 24

    24 Adjusting Im age Adjusting the field angle/focus/ brightness Upon deter mining the imaging direction, adjust the field angle, f ocus and iris lev el accordingly . The method of adjustment v ar ies with the camera in use.  TK-C215V4 ( A pg. 24)  TK-C215V12 ( A pg. 25) 䡵 TK-C215V4 Adjusting field angle Loosen the fastening scre w for the z ...

  • JVC TK-C215V12 - page 25

    25 䡵 TK-C215V12 ● 2 types of angle of view ma y be selected for TK-C215V12. In general, set in a wa y such that the home position shoots a wide range and the alar m position a narrow range. ● Use the alarm input mode selection switch to set the actions when there is an alar m input. ( A pg. 13) CA UTION: ● When setting images on TK-C215V12, ...

  • JVC TK-C215V12 - page 26

    26 Adjusting Im age 䡵 TK-C215V12 (continued)  Registering alarm po sition For registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned o n. Registration of alarm position is enabled. ● Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light ...

  • JVC TK-C215V12 - page 27

    27 Other install ation and adjustment After setting is complete, mount the Inner dome. 1. Mount the inner dome . Mount the inner dome to th e claws (3 locations). CA UTION: ● Mount the inner dome such that it doe s not cov er the lens. ● When mounting the inner dom e, be careful not to mov e the lens position. The image angle set previously wil ...

  • JVC TK-C215V12 - page 28

    28 Other install ation and adjustment As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait for at least 30 minutes.  TK-C215V4  TK-C215V12 1. Remove the dome cover . ...

  • JVC TK-C215V12 - page 29

    29 Other s 䡵 Camera Signal system : Based on NTSC standard Scanning frequencies : 15.734 kHz (Hor izontal), 59.94 Hz (V er tical) Image device: 1/4" IT CCD Effective picture elements: : 380,000 pixels , 768 (H) x 494 (V) Sync system : Line lock/Internal Video S/N: 50 dB (AGC OFF , white 50 % output) Horizontal resolution: : 540 TV lines (Cen ...

  • JVC TK-C215V12 - page 30

    30 Other s 䡵 External Dimens ions [Unit: mm (inches)]  When cover is attached * Specifications and appearance of this unit and related products are subject to change for product improv ement without pr ior notice. Specifications (continued) R 145 (5-3/4) S R 55 (2-1/8) R 116 (4-9/16) 71 (2-13/16) 44 (1-3/4) 2 (1/12) SR55 (2 -1/ 8 ) 123 (4-7/8) ...

  • JVC TK-C215V12 - page 31

    31 Focus chart TK-C215V4_V12_EN.boo k Page 31 Wedne sday, August 2, 2006 1:18 PM ...

  • JVC TK-C215V12 - page 32

    © 2006 Victor Company of Japan, Limited LST0420 -001B TK-C215V4/TK-C215V12 DOME CAMERA TK-C215V4_V12_EN.boo k Page 32 Wedne sday, August 2, 2006 1:18 PM ...

メーカー JVC カテゴリー Security Camera

JVC TK-C215V12のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- TK-C215V12の取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC TK-C215V12の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC TK-C215V12の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC TK-C215V12の取り付け説明書、サービスマニュアル、簡易説明書、またはJVC TK-C215V12のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC TK-C215V12の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC TK-C215V12デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC TK-C215V12を使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC TK-C215V12ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC TK-C215V12の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC TK-C215V12の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC TK-C215V12に関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC TK-C215V12デバイスの基本機能を使うにあたってのヒント。 JVC TK-C215V12のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC TK-C215V12に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC TK-C215V12のメーカー/サービスへの連絡先に関する情報。

JVC TK-C215V12についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC TK-C215V12の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC TK-C215V12で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)