日本語 dropdown-ico

Sunfire OLE-2SFの取扱説明書

24ページ 3.19 mb
ダウンロード

ページに移動 of 24

Summary
  • Sunfire OLE-2SF - page 1

    ...

  • Sunfire OLE-2SF - page 2

    2 Safety W ARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Important Safety Instructions 1. Read Instructions 2. Keep these Instructions 3. Heed all W arnings. 4. Follow all Instructions 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not install near any heat ...

  • Sunfire OLE-2SF - page 3

    Contents Important Safety Instructions ...................... 2 Introduction ................................................. 4 Features ...................................................... 7 System Design, Installation and Connections .............................................. 10 Connectors/Pinout ................................. 12 System ...

  • Sunfire OLE-2SF - page 4

    Introduction The Olé ® -2SF Film Interactive T ouchpad (FIT) is a revolutionary in-wall controller for your Sunre receiver or processor . Using a photographic lm overlay instead of hard buttons, it marries the beauty of a touchscreen with the simplicity of a keypad –seamlessly controlling all major functions of your home theater or second ...

  • Sunfire OLE-2SF - page 5

    Features • Plug-and-play . Right out of the box, the Olé-2SF controls Zone 2 on Olé-ready Sunre receivers and processors • Simple SunT ools™ PC program- ming for customization • Sunre Optimized™ graphics and programming • Full touchpad design, with no hard buttons • T wo inch color OLED (Organic LED) • T wo-way feedback for ...

  • Sunfire OLE-2SF - page 6

    Installation & Usage T ips • When properly installed, nothing should be applying contact pres- sure to the touchpad except for the operator ’s nger . If something is touching the touchscreen window , a false signal can be generated causing the touchpad not to respond to a nger press (Sunre does not recommend wrapping the removable ...

  • Sunfire OLE-2SF - page 7

    Features 1. Mounting Screw (x 4) Use these screws to mount the touchpad into a standard 32 cu in. double-gang electrical box. 2. Program Button This button is for future use. 3. Light Sensor When this sensor is enabled, the Olé-2SF backlight will brighten or dim depending on the room's ambient light conditions. Do not cover the small hole (3a ...

  • Sunfire OLE-2SF - page 8

    8 1 1 9 10 12 12 6 5 13 5. Power T urns system audio on and off. 6. System Bass/T reble control and other system options. 7. Home This toggles between the main source selection screen and the current source control. 8. Source selection View/change the source selection pages. 9. Display This display is used for source selection and system informatio ...

  • Sunfire OLE-2SF - page 9

    14. Z•NET/VIA!NET Switch Y ou must set this switch to VIA!NET for use with Sunre receivers and processors. 15. System RJ-45 Jack Connect this jack with Cat-5 cable to the TP1 or TP2 RJ-45 con- nectors on the rear panel of your Sunre receiver or processor . 16. Local IR Port This port allows the connection of local IR emitters and IR receive ...

  • Sunfire OLE-2SF - page 10

    System Design, Installation and Connections Planning Before installing the Olé-2SF , it is essential to have a detailed and ac- curate system design. An authorized Sunre installer should be con - tracted for proper installation and programming of your touchpad. The rst step to a good design is to map the system. It is advisable to mark up a ...

  • Sunfire OLE-2SF - page 11

    Rough-In Roughing-in the Olé-2SF requires careful attention to the design plan made previously . Review the previ- ous page and make a list of things to factor in to specic mounting loca - tions, before deciding exactly where to place the unit. In order to avoid Electro-Magnetic Interference (EMI), do not mount touchpads close to light dimmers. ...

  • Sunfire OLE-2SF - page 12

    Connectors/Pinout The Olé-2SF has a system RJ-45 connector and a ve-pin Interface Port connector which each perform specic functions. All applications use the RJ-45 connector , while certain situations will require the use of the Local interface port. RJ-45 Connector Use Cat-5 cable to connect the Olé-2SF to a Sunre receiver or pro - ces ...

  • Sunfire OLE-2SF - page 13

    Local IR Interface Port Use this connector when utilizing the Olé-2SF’s local control features, such as local source control, local IR sensors, or sense-enabled auto- mated sequences. W arning: The connection labeled “+12 V olts Out” is a voltage output. Do not con- nect a power supply to this connection! IR-Emitter Out The Local IR-EMITTER ...

  • Sunfire OLE-2SF - page 14

    Local IR Input The Local IR-RECEIVER IN is typically used to connect an external IR sensor to the touchpad. T ypical applications include a plasma- friendly IR sensor placed near a TV , or an auxiliary IR sensor placed in an area more convenient than the location of the touchpad. IR signals that are received by the IR Input are sent out both the Lo ...

  • Sunfire OLE-2SF - page 15

    Local Sense In The LOCAL SENSE IN port allows a contact-closure to trigger IR se- quences programmed into the Olé- 2SF using SunT ools. Use a motion sensor to activate a contact-closure and cause automated actions such as system power on, drapes closed, and lights dimmed, for example. Connect LOCAL SENSE IN and -GROUND to a contact-closure device ...

  • Sunfire OLE-2SF - page 16

    System Connections Zone 2 Control The most common application (and default conguration out of the box) is to use your Olé-2SF as a Zone 2 controller . Without any programming you will be able to: • Select Zone 2 sources • Adjust Zone 2 volume (with feed- back) • Control the AM/FM/SIRIUS tuners (with RDS and metadata feed- back) • Basic ...

  • Sunfire OLE-2SF - page 17

    CA T-5 USE EITHER CONNECTION MAIN ZONE SPEAKERS MAIN ZONE Olé-2SF Home Theater Control (PC required) The Olé-2SF is perfectly suited as an in-wall Home Theater controller . Y ou may want to include one by the entrance to startup or shutdown the system. In this case, you will need to connect your Olé-2SF to a PC running SunT ools to recongure ...

  • Sunfire OLE-2SF - page 18

    Programming The Olé-2SF must be pro- grammed with Sunre’s SunT ools setup software using a PC running Windows XP . Downloads are facili- tated through the USB download port on the front of the unit. Note: A standard USB-A to USB- mini-B cable must be utilized for programming and is not included with the Olé-2SF . T o download a SunT ools pro ...

  • Sunfire OLE-2SF - page 19

    Feature Enable/Disable: Speaker The Olé-2SF contains a small speaker that allows audible feed- back signals to be heard as a result of button pushes. This feature can be disabled in the SunT ools setup software. IR Sensor The Olé-2SF features a built-in IR Sensor . IR signals from a hand-held IR remote control pass through the IR sensor and trave ...

  • Sunfire OLE-2SF - page 20

    Specications Viewing Angle 180° up/down,180° left/right Operating T emp 32°F-104°F / 0°C-40°C OLED Display T ype: 2” Organic LED (OLED) Colors: 252K Resolution: 160 pixels (W) x 128 pixels (H) Connections System Port: RJ-45 Interface Port: 5-position screw terminal Download Port: Mini USB Wiring Requirements Cat-5 Power Requirements 12VD ...

  • Sunfire OLE-2SF - page 21

    T roubleshooting Power Symptom Cause Solution Olé-2SF does not power up. 1. RJ-45 plug crimped incorrectly; or wiring pinout of RJ-45 reversed. V erify wiring pinout and RJ-45 crimp. Correct by re-crimping RJ-45 to Cat-5 cable. 2. Break in Cat-5 between Zone and “Head-End”. Check RJ-45 to RJ-45 con - nections with cable tester . 3. Receiver or ...

  • Sunfire OLE-2SF - page 22

    IR Symptom Cause Solution No control of IR sources. 1. Programming: missing or incorrect IR commands. V erify and correct program- ming. T est IR commands from SunT ools. 2. Wiring: Incorrect wiring between Zone and ‘Head-End”. V erify and correct wiring. 3. Wiring: IR emitter connected to wrong source IR port of multi-room controller . V erify ...

  • Sunfire OLE-2SF - page 23

    Sunre W arranty 23 Sunre, LLC is proud of its products that have been built with care using advanced technology and premium component parts. Y our unit has been crafted to perform properly for many years. Sunre offers the following W arranty to you, the owner of a new Sunre product: The Sunre W arranty for the Olé-2SF touchpad is in ...

  • Sunfire OLE-2SF - page 24

    Manual 913-144-00 Rev A ...

メーカー Sunfire カテゴリー Indoor Furnishings

Sunfire OLE-2SFのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OLE-2SFの取扱説明書
- Sunfireの製品カード
- パンフレット
- またはSunfire OLE-2SFの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sunfire OLE-2SFの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sunfire OLE-2SFの取り付け説明書、サービスマニュアル、簡易説明書、またはSunfire OLE-2SFのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sunfire OLE-2SFの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sunfire OLE-2SFデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSunfire OLE-2SFを使用するのを助ける技術的文書のことです。説明書は通常、全てのSunfire OLE-2SFユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sunfireの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sunfire OLE-2SFの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSunfire OLE-2SFの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sunfire OLE-2SFに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sunfire OLE-2SFデバイスの基本機能を使うにあたってのヒント。 Sunfire OLE-2SFのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sunfire OLE-2SFに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSunfire OLE-2SFのメーカー/サービスへの連絡先に関する情報。

Sunfire OLE-2SFについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもSunfire OLE-2SFの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSunfire OLE-2SFで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)