-
Craftsman 486.24612 - page 1
Owner's IVlanuai ® FRONT U E IVlodel Nos. 486.24611,486.24612 Fits 247 and 917 Series LT/GT Tractors DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. ,, Safety ,, Assembly ,, Operation ,, Maintenance ...
-
Craftsman 486.24612 - page 2
WARRANTY CRAFTSMAN ONE-YEAR FULL WARRANTY When assembled, operated and maintained according to the supplied instructions, if this product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Craftsman outlet in the United States for free replacement. This warranty is void ...
-
Craftsman 486.24612 - page 3
DETERMINE IFYOUR TRACTOR HAS A SINGLE SUSPENSION BRACKET "_ OR DUAL SUSPENSION BRACKETS J SINGLE SUSPENSION BRACKET t SUSPENSION BRACKET FIGURE 1A (page 3) DUAL SUSPENSION BRACKETS SUSPENSION BRACKET SUSPENSION BRACKET FIGURE 1B (page 5) For all tractors with model numbers beginning with 917, look under the front of your tractor (Figure 1A &am ...
-
Craftsman 486.24612 - page 4
STEP 2: (SEE FIGURE 3) * Remove tractor hood. (Refer to tractor manual.) * Remove the browning shield as shown. REMOVE FRONT SCREWS REMOVE BROWNING SHIELD FIGURE 3 STEP 3: (SEE FIGURE 4) * Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for all plugs. BUMPER -._ PUSH DOWN WiTH EVEN PRESSURE WORK BENCH OR SOLI ...
-
Craftsman 486.24612 - page 5
STEP 6: (SEE FIGURE 7) * Replace the browning shield using the front screws you removed in Step 2. REPLACE FRONT SCREWS REPLACE BROWNING SHIELD I FIGURE 7 ( iNSTRUCTiONS FOR DUAL SUSPENSION BRACKET TRACTORS STEP 1: (SEE FIGURE 2) * Open parts bags labelled "A" and "B" and verify that all parts needed are present. NOTE: Place car ...
-
Craftsman 486.24612 - page 6
STEP 2: (SEE FIGURE 3) * Remove tractor hood. (Refer to tractor manual.) * Remove an (LT) Lawn Tractor heat shield like the one shown. Remove a (GT) Garden Tractor heat shield like the one shown only if you need access to inside of tractor frame during step 5. iMPORTANT: Be sure to re-attach the heat shield after bumper is installed. (LT) LAWN TRAC ...
-
Craftsman 486.24612 - page 7
STEP 4: (SEE FIGURE 5) * Remove any bolts present in front mounting holes in side of tractor frame. If bolt will not screw out of hole, check if a nut is present on bolt on inside of frame. On GT tractors, if access to nut is blocked by a front mounted muffler, slide muffler down exhaust tubes to rest on top of browning shield. iMPORTANT: Be sure t ...
-
Craftsman 486.24612 - page 8
( iDENTiFY YOUR TRACTOR FRAME ) For all tractors with model numbers beginning with 247, look at the side of your tractor directly underneath the hood (Figure 1A & 1B). If your frame resembles the one shown in 1A, go toTRACTORS WITH FRAME SHOWN IN FIGURE 1A on page 8. If your frame resembles the one shown in 1B, go to TRACTORS WITH FRAME SHOWN I ...
-
Craftsman 486.24612 - page 9
STEP 2: (SEE FIGURE 3) * Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for all plugs. BUMPER PUSH DOWN WiTH EVEN PRESSURE WORK BENCH OR SOLID TABLE I STEP 3: (SEE FIGURE 4) * Assemble a 0.9 x 3/8" shoulder bolt and 3/8" whizlock nut to each side of the tractor frame. Tighten. 3/8" WHIZLOCK NU ...
-
Craftsman 486.24612 - page 10
TRACTORS WITH FRAME SHOWN iN FIGURE 1B STEP 1: (SEE FIGURE 2) * Open parts bag labelled "A" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. Ref. Part Qty. A 43350 4 B 44072 4 C R19171616 4 D 44742 2 47674 4 E 48106 2 F 47856 2 G 43001 2 H ...
-
Craftsman 486.24612 - page 11
STEP 3: (SEE FIGURE 4) * Assemble a 3/8 × 1" hex bolt and 3/8" whizlock nut to tractor frame and middle slot of the bumper. * Tighten and then loosen nut one half turn. * Repeat for other side of bumper. f 3/8" WHIZLOCK NUT FIGURE 4 STEP 4: (SEE FIGURE 5) * Assemble a 5/16 x 3/4" he×bolt and 5/16" whizlock nut to the trac ...
-
Craftsman 486.24612 - page 12
Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For ...
Craftsman 486.24612についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもCraftsman 486.24612の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCraftsman 486.24612で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。