-
Konica Minolta 250/350 - page 1
V1.2 The Konica Minolta Guide to LDAP This guide details how to set up the: Bizhub 250/350, 420/500, 361/421/501, 600/750 Bizhub C250, C252, C300, C351, C352, C450 Bizhub C203 , 253 , 451 , , 550 , 650 Created by Hotline Suppor t Konica Minolta Hotline Support (UK) ...
-
Konica Minolta 250/350 - page 2
LDAP, Lightweight Directory Access Protocol, is an Internet protocol that Konica Minolta machines can use to look up E-Mail Addresses from a server running Active Directory with LDAP Service * *Server 2008, LDAP is installed separately to Active Directory* To set up LDAP on the Konica Minolta Biz hub machines, please follow the instructions below: ...
-
Konica Minolta 250/350 - page 3
As a rough guide you can find the domain by right clicking ‘My Computer’ and going in to the Properties. Under the ‘Computer Na me’ tab it will say ‘Domain’ as below. The basic rule for the Search Base is if the customer has a separate container of employee e-mail addresses that are outside of the root of the domain this must also be sp ...
-
Konica Minolta 250/350 - page 4
12) Press the ‘FWD’ button to progress to the next screen 13) Enter the ‘Login Name’ and ‘Password’ of an account that is set up on the server. 14) Enter in the ‘Domain Name’ as discovered in Step 9. 15) Press the ‘FWD’ button to progress to the next screen 16) Set as required Set up of LDAP is now complete. T his is us forcin g ...
-
Konica Minolta 250/350 - page 5
You can also set this up via a web browser. To do this, follow the instructions below: 1) Enter the IP address of the Konica Mi nolta machine into Internet Explorer and press Go 2) Log into the web page using the Admin code for the machine. Depending on which machine you have, this will either be 8 x 0’s (00000000) or 12345678. 3) Click on the Ne ...
-
Konica Minolta 250/350 - page 6
Bizhub 250/350 Setting up via the Web Browser- It is easier to configure the Bi zhub 250/350 via the web interface. 1) Log into Admin Mode using the co de of 8 x 0’s (00000000) and click on the Network tab. Make sure you enab le LDAP under the ‘LDAP’ heading before you go into ‘LDAP Server Setting’ 2) Select any available set of 3 dash es ...
-
Konica Minolta 250/350 - page 7
Bizhub C203 – 650 (Bizhub 361-501 is similar) Setting up via the Control Panel – At Machine: 1. Press Utility/Counter 2. Press “Administrator Settings” 3. Enter the Administrator Password, default = 12345678 and press “OK” 4. Press “Fax Settings” ...
-
Konica Minolta 250/350 - page 8
5. Press “Function Settings” 6. Press “Forward TX Setting” 7. Press all as arrowed then “Select from Address Book” ...
-
Konica Minolta 250/350 - page 9
8. Here you have a couple of options, you can select “Index” and search for a recipient or select “Destination Type” and “E-Mail” then select the recipient. The latter is shown below 8. Press “OK” you will then be returned to the screen as in 7 only this time you will see your selected recipient in the Forward Dest. Dialogue box. 9. ...
-
Konica Minolta 250/350 - page 10
1. Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go 2. Log into the web page using the Admin code for the machine. Default = 12345678. 3. Click on the Network tab at the top of the screen 4. Then click on LDAP Setting and set to Enable 4) Select “Setting Up LDAP” and sel ect any available radio button. we w ...
-
Konica Minolta 250/350 - page 11
6. Select “OK” you will then be returned to the screen as in 5-6 above, where you can ‘Test’ the connection. If all OK you can Logout. To use the LDAP search function the pr ocedure will vary slightly depending on the machine model. For this exam ple we will use the Bizhub C550. For File Type selection please refer to the relevant User Manu ...
-
Konica Minolta 250/350 - page 12
Machine used for Example Bizhub C550 Login to the machine’s web browser as Administrator Set up machine to “look” at LDAP Server before enabling Authentication , if machine can already search LDAP for basic email search then any errors with this set up will most likely be due to configuration and not machine. Click on “Security” then “E ...
-
Konica Minolta 250/350 - page 13
Click “OK” then “OK” to confirmation message, you will then be returned to the screen shown previously only now you will see the server listed. You can add multiple servers if required Click on “User Auth/Account Track” enable f unction as “General Settings” highlighted below ...
-
Konica Minolta 250/350 - page 14
Showing Enabling User Authentication - option can be set for Public User Access for BW access if required. Default Function permissions can also be set if required, eg: Total copy/print restriction (ALL users). Click “OK” to all Messages then Logout. User Mode User is shown Logon Screen on Copier consisting of: • Username (1) • Password (2) ...
Konica Minolta 250/350についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもKonica Minolta 250/350の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKonica Minolta 250/350で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。