ページに移動 of 288
Agilent 8614 0B Series Optical Spectrum Analyzer User’ s Guide ...
ii © Copyright Agilent T echnologies 2001 All Rights Reserved. Repro- duction, adaptation, or trans- lation with out pr ior wr itten permi ssi on is pro h ibit ed , except as allowed under copy- right laws. Agilent Part No . 86 14 0- 9006 8 Printed in U SA Janu ary 2002 Agilent T echnolo gies Lightwave Division 3910 Brickway Boulev ard, Sant a Ros ...
iii General Sa fet y Consid era tio ns General Safety Considerat ions This pr oduct has bee n designed and tes t ed in acc o rdance wit h th e st andards listed on the Man ufact urer ’ s De claration of Confor mity , and has been supplied in a saf e co nd ition . The doc umen tatio n contai ns infor mati o n and w a r nings that mus t be fol lowe ...
iv Gener al Sa f ety Co nsid era t ions CAUTIO N This pr o d uct is design ed for use in Inst allatio n Cate go ry II and Poll ut ion Degree 2 per IE C 61 010- 1C and 664 respecti vely . CAUTIO N Do not use too much liqui d in cleaning t he optical spec trum analyze r. W ater can enter the f ront-p anel keyboar d, damagin g sensi tive electro nic c ...
Contents Contents-1 1 Gettin g Starte d Product Overview 1-2 Setting U p the Analyze r 1-8 Making a Measurem ent 1-13 The Menu Bar 1- 17 The Sof tkey P a ne ls 1-18 Laser Safe ty Cons idera tio ns 1-29 Product Opti ons and Acce ss ories 1-30 2 Using the Instrument Setting Up M easureme nts 2-2 Calibr ating W avele ngth Measu rements 2-1 4 Saving , ...
Conte nts -2 Conte nts 7 Spe cifi cations and Re gulator y Informati on Defini ti on of T erms 7- 3 Specifications 7-5 Regulat o ry Inform a tion 7-21 Declaration of Confor mity 7-22 ...
1 Product Overview 1-2 Setting U p the Analyze r 1- 8 Making a Measurem ent 1-13 The Menu Bar 1-17 The Sof tkey P a ne ls 1- 18 Laser Safe ty Cons idera tio ns 1- 29 Product Opti ons and Acce ss ories 1 -3 0 Gett ing Starte d ...
1-2 Gettin g Star ted Prod uct O verview Product Overview The 86140B seri es of opti cal s pec tru m analyzers pro vide fast, accurate , and compre hensive me a surement capabilit ies fo r spe c tral anal ysis. • Full-f ea t ured SCPI commands f or pr og ramming inst ru me nts over LAN • Dis play-o ff f eatur e for making f aster mea suremen ts ...
1-3 Gettin g Start ed Prod uct Ove rview Source T est Application This a ppl ication offe r s automat ed optical so u rc e a n d la s er character i za t io n. Amplifi er T est Appl ication This app l ication simp lif ies the proces s o f c har acterizing gai n and noise figure of o ptic al ampl ifiers s uch as EDF A ’ s, SOA ’ s and Rama n amp ...
1-4 Gettin g Star ted Prod uct O verview Agilent 86140B F ront and Rear Panel s ...
1-5 Gettin g Start ed Prod uct Ove rview ...
1-6 Gettin g Star ted Prod uct O verview Opti cal Spe ctrum An alyzer Dis play Figur e 1- 1. Opt ical Sp ec trum Analy z er D i s pl ay ...
1-7 Gettin g Start ed Prod uct Ove rview Figure 1-2. Display Annotations ...
1-8 Gettin g Star ted Sett in g Up the A na lyzer Setting Up t h e Analyzer Step 1. Receive and Inspect the Shipment Table 1-1. Items in a Standar d Agilent 86140B Ser ies Shipment Descri p tion Produ ct Num b er Item Quantit y BNC Cab le (24 inches) 8120-1839 1 GPIB Cabl e 8120-3444 1 FC/PC D ust Cap 1401-0291 2 Englis h Use r’s Gu ide M anual 8 ...
1-9 Gettin g Start ed Setting Up the Ana ly ze r Inspect the shi pp ing contain er for damag e. Inspect the instrum ent. Verify t hat y ou recei ved the options and accessori es you ordere d. Keep the shippin g contai ner and cu shioning materi al until you have i nspecte d the co ntents of the s h ipment f or comp lete ness a nd ha ve chec ked t h ...
1-10 Gettin g Star ted Sett in g Up the A na lyzer CAUTIO N Do not stack o ther objec ts on the keybo ard; this will c ause self- tes t fail ures o n power -on. You can connect a PCL-language printer (for ex ample, an HP 1 LaserJet) to th e instr ument ’ s rear p anel Parallel conne ctor. U se a p aralle l Cen tronic s prin ter ca - ble, such as ...
1-11 Gettin g Start ed Setting Up the Ana ly ze r Step 3. Apply Power to Instrument Press the power switch at the l ower left-h and corner of t he fr ont pa nel. After a short initia lizati on perio d, the d isplay w ill loo k similar to the pic ture o n this page. Allow th e in strument to war m up for at le ast 1 hour. Step 4. Clean Connectors an ...
1-12 Gettin g Star ted Sett in g Up the A na lyzer by pres si ng the fr on t panel Aut o Alig n bu tton. T his will en su re opti m al ampl i- tude accuracy, and can correct for any mis-alignment caused by the instrume nt shipme nt. T o lear n more abou t thi s or any A gilen t T echno logi es prod uct, visit our w eb site a t ht t p: //www .agilen ...
1-13 Gettin g Start ed Makin g a Measur ement Making a Me asurement This procedur e will introduce you to the Agilent 86140B se ri e s optical spec- trum analyzer front panel cont rols. By following thi s proced ure you will do the follo wing: • Perform an auto alignment • Perform a peak search • Use a delta ma rker • Print the di spl ay Re ...
1-14 Gettin g Star ted Maki n g a Me asureme nt T o perform an Aut o Align For maximum am plitude accur acy , perform an automatic alig nment when ever the optic al spe ctrum anal yzer ha s been mo ved, sub jected to large te mperature chan ge s, or fol lowin g warm - up. Se e “ Auto Align ” on page 3-10 fo r m ore inf or- mation. 1 Connec t a ...
1-15 Gettin g Start ed Makin g a Measur ement T o zoom i n on the signal Press t he S pan softk ey and t hen use the kn ob, st ep keys , or nu meric keypad to zoom in on the signal . Using the delta marker The o ptica l spect r um analyzer has four t ypes o f mark ers; n ormal ma rkers , bandwi dth m arke rs, delta mar kers and no ise marke rs. T h ...
1-16 Gettin g Star ted Maki n g a Me asureme nt Printin g the dis play 10 Press t he Print ke y to p rint a cop y of t he disp lay. The o utput will be se nt to t he internal or extern al prin te r, depend ing on the pri n t er sele cte d. ...
1-17 Gettin g Start ed The Menu Bar The Menu Bar The Me nu bar inc ludes the File , Measu re, Ap plicat ion, a nd Opti ons drop -do wn menus. Each menu selection includes a descriptive label. (Actio n) Indi cate s the select ion wi ll perfor m an ac tion such a s maki ng a m easur ement or pr inti ng the disp lay . (Pan el) Indi cates the se lec t ...
1-18 Gettin g Star ted The So f tkey Pan els The Softkey P anels Y ou can access the soft key pane l s using ei the r th e front-panel key s or the menu b ar . This se ction inclu des b rief d escri ption s of th e fol lowin g me nus. Se e Chapter 3, “ Func tion Refere nce ” for additi onal inform ation on e ach of th e OSA fun cti ons. The Amp ...
1-19 Gettin g Start ed The Softke y Pan els The Amplitude Menus Y ou can access t he Ampl itude soft keys usi ng the fr ont-panel Amplitude key or the Measur e m e nu Ampli tud e select ion on the menu b ar . ...
1-20 Gettin g Star ted The So f tkey Pan els The Applications Menus Y ou can access t he Appli cations (Appl ’ s ) so ftkeys by us ing the front- panel Appl ’ s key or th e Appli cations m enu Launc h an Inst alled Ap plicat ion secti on on the menu bar. For a comple te descri ption of th e appl i cations, re fer to the Ag i- lent 86140B Seri e ...
1-21 Gettin g Start ed The Softke y Pan els ...
1-22 Gettin g Star ted The So f tkey Pan els The Bandwidth/Sweep Menus Y ou can access t he Bandwidth /Sweep soft keys by usi ng the fr ont-panel Band- width/Sweep ke y or t he Me asure me nu Bandwid th/Swe ep select ion o n the menu ba r . ...
1-23 Gettin g Start ed The Softke y Pan els The Markers Menus Y ou can access t he Markers softkeys by using the front-pan el Ma rke rs ke y or the Measur e m e nu Marker s se l ection on the menu bar . ...
1-24 Gettin g Star ted The So f tkey Pan els The Save/Re call Menus Y ou can access the Save/ Recal l softke y s and s et up pane l s by using the drop - down Fi le menu Save/ Recall select ion or the f ront-pane l Save/Recall key . U se these fun ctions to save, recall and print t he measurement results . ...
1-25 Gettin g Start ed The Softke y Pan els The Systems Menus Y ou can access the Syst em softkeys by us ing the front-pa nel System k ey o r the Options menu System sel ection on the menu bar . ...
1-26 Gettin g Star ted The So f tkey Pan els The Systems M enus, continued.... ...
1-27 Gettin g Start ed The Softke y Pan els The Traces Menus Y ou can access t he T races s oftkeys by using th e front-pa nel T r aces key or the Measure menu T races selectio n on the menu bar . ...
1-28 Gettin g Star ted The So f tkey Pan els The Wavelength Menus Y ou can access t he W avelength softkeys by using the fro nt-panel Wavelength key or the M e a su re menu Wavelength sel ec tion o n the menu ba r . ...
1-29 Gettin g Start ed Laser Safet y Co ns id era tio ns Laser Safety Considerations NOTE Refe r to the T unable Laser Module s User’ s Guide for com pl et e las e r safety infor matio n. Lase r Safe ty Lase r radi a ti on in the ul tr aviolet an d far infra re d parts of th e sp ectrum ca n cause damag e pr imaril y to the corne a an d lens of t ...
1-30 Gettin g Star ted Prod uc t Option s and Accesso r ies Product Options and Accessories Options Agilent 86 140B , 86141B, 86142B, 861 46B Benc htop Agilen t 86143 B, 8614 4B, 86145B Port able Instrument S ystem Opti ons Current Sou rce White Lig ht Sour ce Built-in 1310 & 1550 n m EELED Source Built-in 1550 n m EELED S ource Wavele ngt h Ca ...
1-31 Gettin g Start ed Produ ct O ption s and A cces sorie s Table 1-3. Ac cessories Option Descr i ptio n Produ ct Number Ite m Quantity Connec tor Accesso ries 011 HP/HMS-10 Conn ector Ada pter HMS-10 Dust Cap 08154- 61701 1401-0 291 3 3 012 FC/PC C onne ctor Adapte r FC/PC Dust Cap Angled to Fl at , FC/PC Adapt er 08154- 61702 1401-0 291 1250-3 ...
1-32 Gettin g Star ted Prod uc t Option s and Accesso r ies Table 1- 4. Availab le Fiber Siz es Table 1-5. Addition al Parts and Accessor ies Model Number Optical Input O pt io n 002 a (White Li ght Source ) Option 004 a (1310/1550 EELED) Option 005 a (1550 EELED) Option 006 (Calibra tor) Photo- diode Input Mono Output 1 86143B Opt 02 5 9 µ m 50 ? ...
1-33 Gettin g Start ed Produ ct O ption s and A cces sorie s Front Panel Fiber-Opti c Adapters Front Pan el Fiber-Optic Adapter Descriptio n Agilent Part Number Diamond HMS- 10 08154-617 01 FC/PC a a. The F C/PC i s the defau lt fro nt-pan el optical connector . 08154-617 02 SC 08154-617 08 DIN 08154-617 03 ST 08154-617 04 Biconic 081 54-61705 ...
1-34 Gettin g Star ted Prod uc t Option s and Accesso r ies ...
2 Setting Up M easureme nts 2-2 Calibr ating W aveleng th Mea sure ments 2-14 Saving , R e call in g, and Ma na g ing Fi le s 2-19 Analyzing Measurement Da ta 2-27 Analyzer O perating Modes 2-30 Using the Instrument ...
2-2 Usi n g t h e In strume nt Setting Up Measure ments Setting U p Measurem ents This se ction conta in s th e following in f o rmat io n that wi ll help you set u p a wavelength me asurement: • Adju sting S etup Cond ition s • Opera t in g the Internal Wh it e Lig ht Sour c e • Aver ag in g Tr aces • Setting V ideo Bandwidth • Using Sp ...
2-3 Using the In strument Setti ng Up Measur emen ts Adjust ing Setup Condition s Setup p anels allow y ou to adjust setu p conditi ons whic h a re not freque ntly changed. Refer to “ Pres et ” on page 3-65 . Using the softkeys Arrows al low you to navi g ate from fiel d to fiel d in the di alog box. The high - light ed paramet er can be change ...
2-4 Usi n g t h e In strume nt Setting Up Measure ments Operating the Interna l White Li ght Source For Option 002 only Option 002 provi des a bui lt-in white light s ource wh ich is a s table, bro adband light source for sw ept-wavel e ng th st imulus respon se testi ng from 900 nm to 1700 nm. The li gh t sou rce is ideal to pe rfo rm stimul us- r ...
2-5 Using the In strument Setti ng Up Measur emen ts 1 Connect the Ligh t Source Outp ut to the Mo nochroma tor Inpu t using the sho rt 62.5/125 µ m fibe r . The s ta nd ard conn ect o r i n te rfa ce is FC /P C. log A B -- - èø æö log A log B – () = ...
2-6 Usi n g t h e In strume nt Setting Up Measure ments Averagi ng Tra ces T race a ve rag ing improves yo ur measure ment repeata bil ity by smoothi ng out noise. For mea su rem en ts inv o l ving sl ow pol a ri z a ti on sc ra m b ling , us ing vid eo filter ing to im p rove rep eata b ilit y w i ll requi re a ve ry na rr ow vid eo bandw idth (le ...
2-7 Using the In strument Setti ng Up Measur emen ts Setting Video Bandwidth Video bandwid th fi ltering occur s after the de tection of the li ght. In the auto coupled m ode , the video bandwid th has an extre m e ly wide rang e . This allo ws the i n strument to av oid unnec essar y filt ering that would re duce the sweep speed more than r equire ...
2-8 Usi n g t h e In strume nt Setting Up Measure ments vide o bandwidt h an d sens itivi ty , it is re commended t hat e ither the s ensitivit y or the video bandwidth be changed, whichever is the most import ant to the measurem e nt task bei ng perf ormed. T o re duce noise, y ou can se lect a narrower video ba ndwidth to im prove repeatabi lity ...
2-9 Using the In strument Setti ng Up Measur emen ts Setting the Sensit ivity Sett ing sen sitivit y requests the lowest amplitude signal that can be measured relat ive to the hi ghe s t ampli tu de sig na l displa yed. I t is de fi ne d as the si gn al that is si x times the RMS noise. The mi nimu m settin g is – 100 dB. An error will be repo rt ...
2-10 Usi n g t h e In strume nt Setting Up Measure ments Triggeri ng a Measureme nt T rig gerin g a meas ure ment sy nch ron izes the st art o f t he s weep to an int ern ally gener a ted tr igger signal . Internal tr igg ering ensure s c on t inuously trig gered sweep s with the shorte st delay between swee ps. Refer to “ T r igge r Mo de, Inter ...
2-11 Using the In strument Setti ng Up Measur emen ts The d ispl ay wil l have at le ast one d ata sa mple m arke d as valid (high leve l) p er trace point . Or else you can us e the Max Hol d fun ction to com pl e te a trace over se v e ral sw ee ps . Mu lt iple swee ps fil l th e gaps b ecau se the hig h a nd lo w levels of t he g ating signal oc ...
2-12 Usi n g t h e In strume nt Setting Up Measure ments Moving the Active Function Area The ac tive funct ion ar ea on t he dis play c an be moved t o eigh t dif feren t loca- tions . Th is allo ws you to pl a c e th e acti v e ar ea in a locati on th at wil l not int er- fere with the tr ace infor mation. Refer to “ Active Fun ction Ar ea A ssi ...
2-13 Using the In strument Setti ng Up Measur emen ts Indicating an Update is Needed This featu re al erts y ou t o ta ke a swee p afte r ch angi ng an y sw eep re lated parame t ers when the analyzer is not in swe ep mode. For exa m p l e, if you change the resoluti on b andwidt h, the new resol u t ion bandwid th is dis p l a ye d on the bo tto m ...
2-14 Usi n g t h e In strume nt Calibra ting Wave length Meas urements Calibrating W avelength Measurements Environmental variati ons such as air pressure, tempe rature, and humidity can affec t the index of re fractio n of a ir in the mo nochr omator of t he opti cal spec- trum a nalyz er (OS A). T his s ection discu sses c alibra tion m etho ds t ...
2-15 Using the In strument Cali br ati ng Waveleng th Mea sure m en ts Internal Wa velength Calibrati on The optional inte rn al calibrator (1513 to 1540 nm) prov ides a convenie nt method for increa sing wavelen gt h accuracy whe n used with an internal Enhanced W aveleng th Cal ibrat ion (EWC) proce ss. The wave leng th accur a cy of the OSA will ...
2-16 Usi n g t h e In strume nt Calibra ting Wave length Meas urements External Si ngle Wavel ength Calibratio n Using an exter nal sin gle-point ca librati on source a llows t he cal ibratio n to be done at a specific w avel ength. This sing le wav elengt h user ca libra tion can be repeated as oft en as necessary to correct for en vironme ntal va ...
2-17 Using the In strument Cali br ati ng Waveleng th Mea sure m en ts External Multipoint W avelength Calibr ation An ex ternal mult ipoin t w avele ngth ca librat ion can b e per forme d ove r any specified wavel en gth rang e , up to and incl udi ng the full wave leng th ran ge of the OSA (600 nm to 170 0 nm). Narrow measur ement spans c an be c ...
2-18 Usi n g t h e In strume nt Calibra ting Wave length Meas urements W avele ngth Cal S etup and ch oosing the Of fset opti on befo re runni ng the s ingle poin t cali bratio n. T o insur e this offset process ha s provi ded suffic ient a ccurac y , the waveleng th reading s of the multi-wavelength meter and the OSA should be compar ed to ve rify ...
2-19 Using the In strument Savin g, Reca lling, a n d Managing F iles Saving, Recalling, an d Managing Files The func t ions and method s a v a ilab le for saving, rec a ll ing, and managin g f iles that contai n measureme nt setups and res ults are as follows: • Adding a Title to th e Dis pla y • Backing Up o r Restorin g the Int er nal Memory ...
2-20 Usi n g t h e In strume nt Saving , Rec al l ing, an d Manag ing File s Backing Up or Restoring the Internal Memory 1 Press th e f r ont- panel Save/ Recal l key. 2 Press th e Backu p /Restore Menu.... soft key. Note The auto span val ue will not be saved with the measurement . Refer to “ Backup Inte rnal Memory ” o n p age 3- 15 . Soft ke ...
2-21 Using the In strument Savin g, Reca lling, a n d Managing F iles Save w ill o verwri te any c urrently e xisting Fa st Sav e file. Note The aut o span valu e will not be save d w it h the meas u re ment. Saving Measurement and T race Data 1 Pres s th e front-pa n el Save/R ecall key. 2 Press the Save M enu.... softkey. 3 The Sa ve Setup panel ...
2-22 Usi n g t h e In strume nt Saving , Rec al l ing, an d Manag ing File s Save T rac es Selects the traces to be saved. Save Graphics All ows you to sav e g rap hic data in one o f t wo fo rmats. Thes e se lections are valid on l y when sa vin g to the fl opp y dr iv e . CGM ( Computer Graphics Metafile fo rmat) is a vector graph ics format that ...
2-23 Using the In strument Savin g, Reca lling, a n d Managing F iles Entering a Filename Using the Arrow Keys • Use the fro nt-p anel st ep keys ( Ý and ß ) and the ar row so ftkeys ( → and ← ) to high li ght eac h lette r o f th e file na m e . • When the de sire d le tt er or funct ion is selec ted , pres s the Sel ect soft ke y. • S ...
2-24 Usi n g t h e In strume nt Saving , Rec al l ing, an d Manag ing File s Recalling Mea surement a nd Trace Da ta Y ou ca n reca ll measure ment a nd tr ace data u sing the follo wing m ethod s: • Fast Measure ment Recall Mode • Recall Set up Panel Mod e Refer to “ Reca ll (Re call Setup Panel ) ” on page 3-67 . Recal lin g Data in Fa st ...
2-25 Using the In strument Savin g, Reca lling, a n d Managing F iles Recall From Selec ts whet her to rec all f rom a f loppy disk or f rom in ternal memory . 4 When you ar e sa tisfied wit h your select ion s, pres s the Choose F ile to Recall softk ey. The Cata log se tup panel opens . The Catalog setup panel 5 Use the arro w keys or Prev File , ...
2-26 Usi n g t h e In strume nt Saving , Rec al l ing, an d Manag ing File s File Sharing an d Printing over a Networ k This functi on uses the LA N to print to ne twor k print er s and st ore, recall or delete da ta on re m ote hard drives . The da t a can th e n to be acces se d and shar ed amon g the user s an d prin ted o n des ignat ed pr inte ...
2-27 Using the In strument Anal yzi ng Mea su reme nt Da ta Analyzing Measurement Data This sectio n provides advi ce and inf ormation on t he following an alyzer func- tions that allow y ou to analyze the me as ure d amplit ude w avel e ngth data. • Tips fo r Using Traces and M arkers • Measuring the Delta between Traces • Using Tr a c e Mat ...
2-28 Usi n g t h e In strume nt Analy zing Me asureme nt Dat a (2-1) 0.206 nm, -0.002 dB. The color of th e annotati on de notes dif feren t char acte ristic s of the m ark ers: • White anno tation denot es the stat us of th e currentl y acti ve marker. • Green annot a ti on de notes the status of all curr ently use d m ark ers. • Red annota ...
2-29 Using the In strument Anal yzi ng Mea su reme nt Da ta Using Trace Ma th to Measure Wavele ngth Drift 1 From t he fro nt panel, press Tr aces > Active Trace > TrA . 2 Press Single Swee p , Bandwidt h Swe ep , Sing le Swee p to update Trace A then p r ess Trac es , Update A off . 3 Press Active Trace > TrB . 4 Press S weep > Repe at ...
2-30 Usi n g t h e In strume nt Analy zer Op erat ing Mo de s Analyzer Operating Modes This sectio n dis cusse s the follow ing analyz er m odes that you ca n use in spe- cific measurement applicati ons . • Filter Mode (For Agilent 86144B/8 6146B only) • Filter Mode (For Agilent 86141B onl y ) • Time Reso lved Chirp Filter Mode For Agilent 86 ...
2-31 Using the In strument Analy zer Op erat ing Mo de s When the a n al yzer enter s the filte r m o de , th e swee p stops w i th the ana l yzer filter tuned to the cen te r wavele ng th. (If a marker is on, the analy ze r filte r is tune d to the marker wav e length.) The las t trace remain s di splayed to sho w the input spectr um befo re the f ...
2-32 Usi n g t h e In strume nt Analy zer Op erat ing Mo de s Table 2-6. Diffe rences Between Agilent 86141B and 86144B/86146B 86141B U niq ue Op eratio n ( Interna l 50 µ m Fiber S wi tch) Filter mode i ni tializa t ion: • Previou s sett ings are l ost • A sing le swe ep is t aken Markers used: • The marker is se t to the re ference level F ...
2-33 Using the In strument Analy zer Op erat ing Mo de s Accessing the filter mode (for 8614 4B/86146B only) Note Filte r m ode wil l no t funct ion in zer o sp a n . The fi lte r mod e selec ti on wi ll be shad ed ou t. The current state befor e en te ring filt er mode will not be sa v ed . A sweep wi ll not be taken . Th e reference lev el will n ...
2-34 Usi n g t h e In strume nt Analy zer Op erat ing Mo de s The dat a retur ned by the alig nmen t is sto red for bo th the ex terna l (9 µ m) a nd the inter n al (50 µ m ) pa t h. W ith the da t a stor ed for both pa t hs, the alignme nt for the i nternal path is improved due to the incr eased re solut ion bandw idth o f the exte rn al pat h . ...
2-35 Using the In strument Analy zer Op erat ing Mo de s Note If the file save d in filter mod e is r eca lled i nto an i nstru ment w ith f irmw are revi sion B.04. 02, a critic al error occ urs, ind icating a gra ting posit ioning fa ilure. Restart the instrum en t to clear th e er ror and the n cont inue maki ng measurem ents. Filter Mode For Ag ...
2-36 Usi n g t h e In strume nt Analy zer Op erat ing Mo de s The li gh t is o utp ut f rom th e op ti cal s pe ctr um a nal yzer ’ s front pane l monoch ro- mator o ut put connecto r . This li gh t is a filter ed (by the resolut ion bandwidth ) and attenuate d (b y the m o noch romator lo ss) light inpu t to the front pane l monochrom a t or inp ...
2-37 Using the In strument Analy zer Op erat ing Mo de s Time Resolv ed Chirp For Agilent 86146B opti on TRC onl y The Agi lent 861 46B , wi th the filt er mod e capab i lity , will measu re sid e m o de suppres sion ratio (SM SR), wavelength , and power . W ith the addi ti on of an Agilent 861 00 Infi ni um Di g ital Communi cati ons Anal y zer (D ...
2-38 Usi n g t h e In strume nt Analy zer Op erat ing Mo de s ...
3 Function Reference ...
3-2 Function Reference Func tion Ref e rence Function Reference This ch a pte r is an a lph abeti cal ref eren ce of fr on t pa n el key s, so f tkeys , and setup p anel p aram eters . It is desi gned fo r qu ick in format ion a cces s. For exam- ple, du r ing an operatio n you may find a key wh os e function is un fam i liar to you. Note the key n ...
3-3 Function Refere nce Active Ma rke r Active Mar ker Acces ses the m enu that al low s yo u to sele ct an ac ti ve mark er . Sel ectin g a marker always pl aces th at marker o n the cent er wavelen gth o f the activ e trace. Up to fo ur mark ers can be sim ultane ously displ ayed. If mult iple mar ker s are displayed, the ac tive marke r app ear ...
3-4 Function Reference Adv Se rvice F unctio ns Adv Servic e Functions Access es the fo llowi ng func tion s: • Grat in g Orde r • More Adv Serv ice M enu • Waveleng th Limi t • Zero No w Key Path System > More Syste m Functi ons > Se rvice Me nu > Adv Ser vice Fu nctions Advanced Line Mkr Functions Access es the fo llowi ng func t ...
3-5 Function Refere nce All Off All Off T urns all the active marke rs off. Note If filt er m ode is o n, this func tion is not ava ilabl e. Key Path Mark ers > Acti ve M arke r > A ll Of f Remo te Commands CALCulate[1|2 |3|4|5|6]: MARKer[1|2| 3|4]:AOFF Amplitude Acce sses t he men u of keys that allo w you to c ontro l the ins trumen t ’ s ...
3-6 Function Reference Ampl i tude Se tup Amplitude Setup Access es the Amp litude S etup pane l that allows you to sp ecify a mplitu de rel ated func tions: • amplitude co rrection mode • amplitude co rrection sel • amplit ude uni ts • auto chop mode • auto r angin g • auto zero • power calibra tion • refere nce level positi on • ...
3-7 Function Refere nce Amplitude Setup Setup P ane l Sele ctio ns Reference Leve l Position The v alue sel ected for t he Ref erence Le vel Pos ition deter mines t he po sition of the ref er ence level on th e gr aticule. Set t ing th is value t o zer o di v is ions places the refe re nce leve l on the very bo tto m o f th e grid . Setti ng the re ...
3-8 Function Reference Ampl i tude Se tup Note T urni ng Aut o Zero o ff a llows t he ins trumen t to s weep fas ter , but res ults in le ss accuracy on low level signals. The op tica l spect rum analyze r perf orms a more comple te zeroing when the ins t rumen t is first turned on. Y ou can ru n this more comple te routine any ti me by pressing th ...
3-9 Function Refere nce Amplitud e Units (Amp litude S etup Pa nel) When AMPCOR is turned on, t he corr ection po ints ar e applied a cross the active measure ment range and added t o all measure ment results. Between point s, the cor recti on valu es are in terpo lated l inear ly or log arithmi cally . When measu ri ng at wavelen gths outsid e the ...
3-10 Function Reference Auto Al ign Auto Alig n Pressin g the auto align butt on on the fron t pane l of th e i nst rument performs an auto m a tic alignm ent of th e inst rument us ing th e large s t signa l found in a full span s weep. This alig ns th e outpu t of t h e monochr omator with the p hoto- detect or for impr oved a m pl itude acc u ra ...
3-11 Function Refere nce Auto A lign & Add t o T rajectory Auto Align & Add to Trajecto ry Allows alignment at several wavelengths , ensuring amplitude accuracy of your measur ements . Befo re in itiati ng the ali gnment , conn ec t a broad ba nd ligh t source to the fron t-panel inpu t connector . (Y ou may add and/or update the existi ng ...
3-12 Function Reference Auto M eas broa dband or n arrowba nd light s ource. If there is in suffic ient sign al power , the automatic measure ment will not be performed, and a w arning message will be repo rt ed. This autom atic measure men t routine is nor m a ll y the best way to adjus t sensi ti vity w hi le ma in tain in g the fa s test sw eep ...
3-13 Function Refere nce Auto Ra nging (Amplitude S etup Panel) Note None of the A utomeas ure Set up para meters are affe cted by t he f ront-panel Preset key . They ar e not saved as part o f the measure ment setup. Key Path Auto Meas Rela ted Fun ction s Auto Alig n Remo te Commands DISPlay[ :WIN Dow[1 ]]:T RACe: ALL[ :SCAL e][:A UTO] DISPla y[: ...
3-14 Function Reference Auto Z ero (Amplit ude Se tup Pan el) Auto Zero (Amplit ude Setup Panel) T urn s A ut o Ze r o o n a nd o ff . A ut o Ze ro o n en a b le s th e in t er n a l a m pl i fi e rs t o b e zeroed betw een swee ps. In th is mode, the instr ument c ompensa tes f or te m- perat ure-re lated curre nt dr ift betwee n eac h sw eep. Alt ...
3-15 Function Refere nce Backup Intern al Memory Key Path Trac es > Av er agi n g Remo te Commands CALCulate[1|2|3| 4|5|6]:AVERage :COUNt CALCulate[ 1|2|3|4| 5|6]:AVERage :STATe Backup Internal Memory Allow s yo u to ma ke a co mple te ba ckup o f use r mem ory on to a flopp y disk. All user files (measureme nt, trace , and s p ecificatio n set ...
3-16 Function Reference Bandwi dth M ark er In terp olati on (M arker Setu p P anel) Bandwidth Mar ker Interpol ation (Marker Setup Pan e l) T urn s the ba n dwi dth marker inter polati on on or of f. Wh en o n, th e bandw i dth marker s w ill be plac e d at the exact numbe r of dB (NDB) from the nor m a l marke r, if within the tr ace ra nge. Th e ...
3-17 Function Refere nce BW Mark er Units (M arker Setup Panel) BW Marker Units (Marker Setup Panel) Sets the bandwidt h ma rke r X-axis readout for fre quency or wavele ng th whe n the in strument i s in a non-ze ro span. The availab le selectio ns are nm, µ m, Ang, GHz, and THz. T he defau lt un it is nm (nano meters ). Th is se tting co ntrols ...
3-18 Function Reference Calibrator Mu lti- Pt Align Calib rator M ult i-Pt Al ign Adju sts t he me chan ical p ositi on of the inst rument ’ s internal optical compo- nents ensur ing amplitu de accuracy of you r measurem e nts . Before ini ti ati ng the alignm ent, con nect th e intern al calibra tor to the front-pan el input connec- tor . Refer ...
3-19 Function Refere nce Center Wa velength St ep Siz e (Wa velength Setu p Panel) Rela ted Fun ction s Star t WL, Stop WL, Span Remo te Commands SENSe:WA Velen gth:C ENTe r Center Wav eleng th Step Size (Wav elength Se tup Panel ) Specifi es th e cent er wav elen gth ste p size . This is us ed fo r incr ementi ng cent er wavelength using th e ↑ ...
3-20 Function Reference Curre nt Sour ce Se tup Current Sour ce Setup Accesses t he Curr ent Source Setu p panel th at allows y ou to tu rn on or off the current source, set th e cur rent l imit, enable pulse w idth, duty r atio, an d sy n- chronize th e ADC sync outp ut. Refer to “ Opera t in g the Int erna l W hi te Ligh t Source ” on page 2- ...
3-21 Function Refere nce Default Math T race F Default Math Trace F Defin es the math expres sion to be used an d tur n s the math opera t io n on: F=C LOG -D. The r esult is plac ed in T race F . The math opera ti o n is pe rformed in linear un its. See “ U s ing T race M a th to Meas ure W avele ngth Dr ift ” on page 2-29 . Key Path Traces &g ...
3-22 Function Reference Delta Mark er On/Off Delta Marker O n/Off This to gg l e functi on fixe s the pos itio n of the ref eren ce mark e r a n d activa t es the de lta marker . This mea sures the d ifferen ce between the acti ve (referenc e) marker and the delta m arker . The fron t kn ob, st ep keys, o r keyp ad can be used to move the delta mar ...
3-23 Function Refere nce Disp lay Mod e Display Mode Access es th e choice of log (logar ithmic) or lin (lin ear) da ta dis play . Key Path Ampl it u de > Display mo de Remo te Commands DISPlay: WINDow: TRACe:Y: SCALe: SPACing L INear| LOGarit hmic Display Setup Accesses the di splay s etup panel selecti ons which include : • active function a ...
3-24 Function Reference Disp lay Set up Ti t l e T urns the title ON or OFF on t he di splay . Active Fun ction Area A ssist Automa ticall y sets the A ctive Fu ncti on Area (when functi on is turn ed on) t o the f irst or top s oftk ey . For e xample, wh en you pres s the fro nt-pa nel Ba nd- width/Sweep key , th e Act ive Function Area Ass is t f ...
3-25 Function Refere nce Exchan ge M enu Exchange Menu Acces ses the tra c e ex cha n ge se lecti ons w hi ch includ e: • A Exch a ng e B • B Exchange C • C Exchange A • D Exchange A • E Exch a ng e A • F Exchange A Exch anges the X- and Y -axis data of the tw o traces . The trace p airs that can be exchanged are T race A with any trace ...
3-26 Function Reference Fast M eas Rec all Fast Meas Recall Accesses the fast measure recal l functi on that re call s th e measur ement s tate previo usly s aved as FASTSAVE.da t in the in ternal memory by the Fast Mea- sure S ave functi on. Refer to “ Reca l ling Da ta i n Fas t Mea s R ec all M ode ” on page 2-24 Key Path Save/Reca l l > ...
3-27 Function Refere nce File S hares When Ma nu al is selected , pressi ng the Choose File to Save softkey w ill acce ss the Fi lename Men u set up panel. Use the fron t panel step k eys, knob , or arrow softk eys to high light and then select each letter in the fil ename. File names can also be s et wi th an e xternal k eyboa rd, Refer t o “ En ...
3-28 Function Reference Filter Ma rker Tune Filter Marker Tune For Agilent 8614 4B/86146B Filter Mode on ly . T unes the wavele ng th of the preselector . During the pre selector in st rume nt mode, the i n strument a cts as an o ptica l filt er at a fixe d waveleng th. Altho ugh the instr ume nt is not swee ping th e di sp laye d input ra n ge, th ...
3-29 Function Refere nce Fi lter Mode Filter Mode For Agilent 8614 1B only Access es the fi lter mod e function . Refer to “ Filter Mode ” on page 2-30 Key Path Appl ’ s > Measuremen t Mode s > Filter Mode Remo te Commands INSTrument: SELect “ FIL TER ” Filter Mode For the Agile nt 86144B/8614 6B Filter Mode only . The filt er mod e ...
3-30 Function Reference Firmware Upgrade Firmware Upgrade The instr ument will resta rt into a util ity to upgr ade the i nstru men t fir mware . For upgr ade instructio ns, or to order a firmware up grade k it, visit or web site at http://www.agilent.com/cm/rdmfg/osa/downloads/ 8614xafirmware.shtml . Key Path System > M ore S yste m Fun ctions ...
3-31 Function Refere nce GPIB Addre ss GPIB Addr ess Acces se s the GP IB ad dre ss in fo rm a t ion. T o chan ge the a ddr ess, use the numer ic a l en try keys, step ke ys, or knob to ente r the new GP IB a dd r ess infor- mation . If changes are ma d e, p r ess the Select softke y . Press th e De faults soft - key to r eset the a ddres s to the ...
3-32 Function Reference Hold A .. .F No ne Min Max (tra ce) Hold A...F None Min Max (tr ace) Hold Max compa res the c urre nt amp litud e v alue of e ach po int o n th e acti ve trace in th e curre nt swee p to the corre spo nding poi nt detecte d during the previo us sweep, then d ispla ys the ma ximum v alue . Hold Min co mpare s the curr ent am ...
3-33 Function Refere nce Light So urce Light Source T urns the desire d ligh t so u rce on o r off. The num b er and typ e of sourc es dis - played depe nds on the opti ons installe d. Refer to “ Ope ra tin g th e Inter nal Whit e Light Source ” on page 2-4 Key Path System > O ption s > Li ght S ource Rela ted Fun ction s Cur rent S ource ...
3-34 Function Reference Lin Mat h C= A –B Lin Math C=A – B Subtra cts T race B from T race A point b y point, th en stor es the results in T race C in linear units. If T race A is i n View On mode, th is funct ion is conti nuous and occur s e very sw eep. Result s of the su b t r acti on a re refer e nced to 0 dB . Th is ofte n re quires a refe ...
3-35 Function Refere nce Log M a t h C=A – B Remo te Commands GPIB GoTo Local Command Log Math C=A – B Subtrac ts T race B from T r ace A po int by po int, then stores the resul ts in T race C in loga r ithm ic un its. If T ra ce A is in View O n mo de, this fun cti on is conti nu - ous and o ccurs ev ery swe ep. Res ults of the subt ract ion a ...
3-36 Function Reference Log Math F=C – D Log Math F=C – D Subt racts T race D from T race C poi nt by point, th en store s the result s in T rac e F in loga r ithm ic un its. If T race C is in View On m ode , this fu ncti on is c ont inu- ous and o ccurs ev ery swe ep. Res ults of the subt ract ion ar e refere nced to 0 dB . This often re quir ...
3-37 Function Refere nce Marke r BW Marker BW Meas ur es the pa s sband of t h e signal. T o ente r the ban dwidth amp l itude of the bandw id th markers, make a select ion from the sof tk e ys ( – 3 dB, – 6 d B , – 10 dB, and – 20 dB) or use th e kno b, step keys , or numer ic keys . Ma r ker ba n dwidth inform atio n is dis pla ye d a t t ...
3-38 Function Reference Marker S earch Me nu Mark er Sear ch Menu Accesses the fol low ing marke r pe ak and pi t se arch funct ion s: • peak or pit search mode • peak or pit search • nex t pe ak down, left or right • next p it up , le ft or rig ht • active marker s The a ctive markers ca n also be turned on or off from this menu, which a ...
3-39 Function Refere nce Marke r S et up Marker Setup Accesses a menu that allows you to make change s to defaul t marke r s ett in gs. From the se tup panel yo u can mak e chan ges to : • Bandwidth/M arker Inter pol ati on On|Off • BW Mar ker Un its • Delta M a rk er Un its • Mark er Sea rch Thre shold Valu e • Noise Mar ker Refere nce B ...
3-40 Function Reference Marker S etup Setup P ane l Sele ctio ns Normal Marker Units Sets the X- axis immediat ely di splayed mar ker in format ion fo r fre quency o r wavelength when the inst rument is in a non-zero span. This sett ing controls only the n ormal marker X-axis an d the delta reference immediately disp layed informat ion. T his setti ...
3-41 Function Refere nce Marke r S et up Peak Excursion Determ i nes (in dB) wh ic h side mo de s a re includ ed in the me a s uremen ts. T o be acc epted , each trace peak must rise, a nd t hen fa ll, b y at l east the p eak excursion value about a given spec tral compone nt . The default val ue is 3 dB. Setting the value too hi gh may re sul t in ...
3-42 Function Reference Marker S etup Changing t he pit exc urs i on . T he p it sea rche s ma y not reco gniz e val id s ig- nals near t he noise floor when t he pit exc ursi o n defini tion is l ess than 3 dB. Thus , bef ore p erfor ming p it searches on signa ls near the no ise floor , re duce the p it exc ursio n val ue. Howev er , red u cing t ...
3-43 Function Refere nce Marker to Ce nte r • Manua l: Uses a user s pecified f ix of fset from th e cen ter mar ker. Th e de fault value is 0.4 nm and the step siz e is 0. 2 nm when usin g the step k eys. T his field is inactiv e when set to Au to or Pi t. Key Path Markers > Marke r Se tu p Marker to Center Changes the cent er wavelength to t ...
3-44 Function Reference Markers Marker Tune For Agilent 8614 1B only T unes the wavele ng th of the preselector . During the pre selector in st rume nt mode, the i n strument a cts as an o ptica l filt er at a fixe d waveleng th. The o ut- put is ava ilable at th e front pa nel M onochro mator c onne ctor . Althou gh the instr um ent is no t sw eep ...
3-45 Function Refere nce More Ma rke r Fu nc tio ns Measurement Mode For Agilent 8614 1B/86144B/86146B only Accesses fi lte r mode and po wer meter mo de . Key Path Appl ’ s > Meas ure m e nt Mod es Rela ted Fun ction s Filter mod e, Power Meter mod e Remo te Commands INSTrument: NSELect INSTrum ent:SE Lect More Marker Functions Access es th e ...
3-46 Function Reference Move Ac tive Are a Move Active Ar ea Moves the acti v e fu ncti on ar ea to o n e of eig ht on-s creen lo ca t ion s. T o chan g e the active fu nction area lo cation, pre ss the Move Ac tiv e Area softk ey until you are satisf ied with the pos ition . Key Path System > Move A ctive Ar ea Move Power Display Ar ea For Agil ...
3-47 Function Refere nce New GP I B Addr ess (R emo te Se t up Pan el ) New GPIB Address (Remot e Setup Panel) Allows you to e nter a new GPIB add ress. T o chan ge the address, use t he numer ic e ntry k eys, s tep keys , o r kno b. Pr ess the D ef ault s so ftkey to res et t he address to the factory pre se t de fault, 23. Key Path System > Mo ...
3-48 Function Reference Next Peak R ight → Next Peak Right → Places t h e marke r on th e n ext peak lo c a te d at a higher X-axis value (usu ally wavelength ) than the curr ent marker posit ion . This peak must meet the pe ak excur sion an d thr eshol d crit eria. If the s pecif ied mar ker is off, i t will be turn ed on an d placed a t th e ...
3-49 Function Refere nce Next Pi t Up ↑ Next Pit Up ↑ Places the activ e marke r on the next lo west pit fr om the cu rrent ma rker amplit ude . Th is pit mus t m ee t the pit excur sion and th re sho ld criteri a. If the spec ified marker is o ff, it w ill be t urned on a nd pla ced at the center wa ve- length . The se a rc h for the ne xt min ...
3-50 Function Reference Normal/Del ta Marker Interpolatio n (Ma rker Setup Panel) Normal/ Delta Marker Interpolat ion (Marker Set up Panel) T urns th e norm al/de lta ma rker inter polation on or of f. Wh en on, th e nor mal/ delta marke rs will be placed at the e xact w avelen gth or frequ ency valu e sel ec te d if it is wi th i n the trace range ...
3-51 Function Refere nce OSNR Mar ker OSNR Marker Indi c ates the sign a l qu al ity based on the sign a l st rength and no is e level. T urn- ing on th e OSNR m arker will dis pla y fo ur m a rk e rs: an ac t ive mar ker , a ce nt er marker , and two no is e markers. T o adjus t the active mark er to th e des ir ed measu rement location , use the ...
3-52 Function Reference OSNR Marke r OSNR = Interpolat in g Noise T o accur ately measure noi se, the noise level must be determ ined at the sig nal wavelength. The measure m e nt cann ot be dir e ctly pe rfo rmed because the sig- nal pow e r leve l m asks th e n ois e. T o esti m ate th e no ise at the sign a l w a ve - length , the OSA meas ure s ...
3-53 Function Refere nce OSNR Mar ker Noise Not Found error message Tip : If th is e rror occurs , de crease the p it e xcurs ion (when y ou ar e in pit mode), increase the span (w hen yo u are i n auto or ma nual mo de), or select manua l (when y ou se lect auto mo de) to a djust the offset . Center Not F ound and OSNR Not Valid occurs if no s ign ...
3-54 Function Reference OSNR Marke r Cent er No t Fo und e rro r me ssage Key Path Markers > More Mark er Functions > OSNR Mar ker Remo te Commands CALCulate[1|2 |3|4|5|6]:MA RKer[1|2|3|4 ]:FUNCtio n:OSNR[:S TATe} OFF| ON|0 |1 ...
3-55 Function Refere nce Options Options Accesses the Curr ent Sour ce Setu p and Light So urce Ou tput Set up so ftkeys. Current Source Setup panel allo ws yo u to s et the c urrent lim it, ena ble p ulse mode and sy nch ronize the A DC sy nc out put. Se e “ Cu rrent S ource Se tup ” on page 3-20 Light Source panel t ur n s the de sired ligh t ...
3-56 Function Reference OSA St ate OSA State Displ ays the sta te in format ion. Th e state inf ormatio n incl udes: • center wavelength • model # • options • seria l # • software revi sion • span • start wavelength • stop wavelength • wavelength offset • wavelength step Y ou ca n pri nt this informa tion using the in ternal or ...
3-57 Function Refere nce Peak to C ent er Peak to Cen ter Finds the high est a mplitu de tr ace po int an d se ts t he ce nter wavelen gth t o tha t wavelength . Key Path Wavel engt h > P eak t o Ce nter Remo te Commands CALCulate[1|2 |3|4|5|6 ]:MARKer[1 |2|3|4]:MA Ximum CALCulate[ 1|2|3|4| 5|6]:MAR Ker[1|2|3|4 ]:SCENter SENS e:WAVe length :CEN ...
3-58 Function Reference Peak Sear ch Peak Sear ch Place s a marke r on the highes t am plitu de t race p oint. If n o mar ker is on , Marker #1 will be us ed fo r the peak sear ch. Next Peak Down Place s the mark er on the next highe st pea k f rom the cu rrent mar ker a mpli- tude . This next high est pe ak must meet the p eak exc ursio n and thre ...
3-59 Function Refere nce Peak Se arc h at End of E ac h Swee p (Mark er Set up Pan el ) Key Path Markers > Peak Search Markers > More Mark er Functi ons > Marker Sear ch Me nu > Search Mod e Peak > Peak Sear ch Remo te Commands CALCulate[1|2 |3|4|5|6 ]:MARKer[1 |2|3|4]:MA Ximum Peak Se arch at En d of Ea ch Sweep (Ma rker Setup Panel ...
3-60 Function Reference Perform Cali bration Perfo rm Calibra tion Performs a power or wave length calibration aft er the setup has been spec ified by th e user . Key Path System > Calibratio n > P ower Cal Se tup > Perform Cal ibration Remo te Commands CA Libratio n:WAV elength :INTernal Pit Excursion (Marker Setup Panel ) Sets the p it e ...
3-61 Function Refere nce Pit Se arch Pit Search Places a marker o n the l owest ampli t ude trac e poin t whic h meet s the pit excur sio n crit er ia. If no mar ker is on , Mark er #1 wil l be us ed fo r the p it sea rc h. Key Path Markers > Mor e Marker Functions > M arker Se arch Menu > S earch Mode Pit > Pit Search Remo te Commands ...
3-62 Function Reference Power Calib rati on Setup Power Display For 86141B/8 6144B/86146B on ly In Power Mete r mode, tu rns power dis play on or off. Key Path Appl ’ s > Meas ure m e nt Mod es > Power Mete r Mode > Power D ispl ay Remo te Commands DISPl a y[:WINDow[1] ]:POPup[1|2|3| 4][:ALL] O FF|ON|0|1 Power M eter Mode For 86141B/8 61 ...
3-63 Function Refere nce Power Calibr ation Setup Key Path Appl ’ s > Meas ure m e nt Mod es > Power Meter Mod e Remo te Commands INSTrument: SELect ? INSTrume nt:NSEL ect Power M eter Ze ro For Agilent 8614 1B/86144B/86146B only Zero ’ s the power me ter dete ctor to provide more accurat e measureme nts. Key Path Appl ’ s > Meas ure ...
3-64 Function Reference Power On State IP/Last Powe r On Stat e IP/La st Selec ts th e stat e, IP or Las t , of the i nstrument w hen it is turned o n. The defau lt stat e is I P . If IP is s elec ted, th e instr ume nt will turn on in a kn own, pr eset state . Wi th the setti ngs as they w ould be af ter pressi ng the fro nt-panel Preset key . For ...
3-65 Function Refere nce Pres et Pres et Resets the instru ment to a kn own preset state. Selectin g pres et abor ts any curren t oper ations and clears the GPIB output queue. Preset leaves so me set- tings in pl ace, for ex ampl e, the title on t he di splay . Table 3-7. Defaul t values Function Preset Valu e Func tion Pr eset Valu e Start wavelen ...
3-66 Function Reference Prin t Key Path Preset Rela ted Fun ction s Factory Preset (IP) Remo te Commands SYSTem:PRE Set Print The pr int fun ction can be acce ssed b y the fro nt pane l prin t key or by using the drop-d own File m enu print s election. Use this f unctio n to prin t a co py of the display . Pri nt loca ti on is det ermine d by the P ...
3-67 Function Refere nce Printer Se tup Printer Setup Acce ss es the printer se tup panel tha t allow s yo u to select eit he r t h e inter nal printer or extern al pri nter as t he pri nt de stinat ion. Key Path System > P rint er Set up Remo te Commands H COPy:DE STinat ion Printer Shares Uses th e LAN (lo cal a rea n et wo rk) to pr i nt da t ...
3-68 Function Reference Reca ll Fro m (R ecall Setu p P anel) When T rac e(s ) Onl y is sele cted, the tra ce d ata is dis pla yed und er t he c urre nt instr um ent con dit io ns. Note T o insure accurate measure m e nts , a wavelength cal ibration shou ld be perform e d each time measur em e nt is recal le d fro m memory . Key Path Save/Recall &g ...
3-69 Function Refere nce Recal l Menu Recall M enu Accesses the Recal l Setup pane l fo r the followi ng setti ng s: • Reca ll (al l mea sur ement data or tra c e data only) • Recal l Fro m (re call from a flop py disk or fr o m the inte rnal drive • Network Fil e Share 1|2| 3| 4 • Network File Path Note T o insure accurate measure m e nts ...
3-70 Function Reference Referen ce Lev el Positi on (Ampli tude Setup Pan el) Reference Level Position (Amplitude Setup Panel) Determ i nes th e posit io n of the ref eren c e le v e l on th e gr atic ul e. Setti ng t his value to zero div isions places th e refer ence level on th e ver y botto m of the grid . Se tti ng the ref eren ce l evel to 10 ...
3-71 Function Refere nce Remote P rinter Share Pa nel Remo te Commands MMEMORY:FSHAr e [1|2|3| 4][: P AT H] <param> MMEMORY:FS HAre [ 1|2|3|4] [:ADDRess]<pa ram> Remote Printer Share Panel Uses the LAN (l ocal are a net work) to p rint to de signa ted, n etw ork pr inters . See “ R ecal ling M easur emen t and T ra ce Da ta ” on pag ...
3-72 Function Reference Res B W Remo te Commands INITiate:C ONTinuo us Res BW Sets the resol ution band widt h valu e to be us ed. This d eterm ines t he in stru- ment ’ s ability to di sp lay two closely sp aced signal s a s tw o distin ct responses . The reso lutio n ban dw i dth can be se t to one of th e follo w in g val ue s: • For 86140B ...
3-73 Function Refere nce Rese t Mi n/ Max Hold Reset Min/Max Hold Resets trace ho ld dat a and returns t o the T races fun ction keys wher e you can selec t an active trace, tra ce in put, updat e, vie w , and ho ld functio ns. Key Path Trac es > Hold (trac e ) > Re se t Min/ Ma x Hold Remo te Commands CALCulate[1|2 |3|4|5|6 ]:MAXimum:CL Ear ...
3-74 Function Reference Save (Save Setu p P anel) Save (Save Setup Panel ) Select s whethe r all me a s uremen t data or only tra ce data wi ll be save d. See “ Saving Measurement and T race Data ” on page 2-20 . When Measure men t (All Visible + S tate) is sele cted, all ins tru ment c ondit ions will be saved. T he mea surem ent data is save ...
3-75 Function Refere nce Save Graphi cs (Sav e Setu p Pane l) Save Graphics (Sav e Setup Panel) Saves graphic data in CGM or GIF format. The CGM (Computer Graphics Metafile ) fo rmat is a vector graphics for ma t that d escri bes p icture s and gra phic al ele ment s in g eom etric term s. The GIF ( G ra ph ics In te rc h ange fo r mat) is a cross ...
3-76 Function Reference Save Set up The Sa ve Se tup panel Setup P ane l Sele ctio ns File Name Select s man ual o r au tomat ic m ode fo r choo sing a fi le na me. The Fi lename M enu setup panel Network File Path Uses th e L AN (local a re a netw ork ) to prin t to desi gn ated, network pr inte rs . ...
3-77 Function Refere nce Save S etup Note T o acc ess th e file and print er sh are softk eys, yo u must fir st c onfig ure th e netw ork an d ent er th e user shar e iden tity /user p rofile in formation for remote shares. The soft keys for file and p rinter share will th en become available for select ion. Network File Sh are Uses the LAN (l ocal ...
3-78 Function Reference Save /Recal l Key Path Save/Recall > Save Menu Remo te Commands (Graphics format) HCOPy:D EVice:LANGuage (Measurement) *SAV (Trace only) MMEMory:STORe:TRACe (Networ k File Sh ar e)MMEMory:FSHAre [1 |2 | 3 |4][: PAT H] <param> (Networ k File Sh ar e)MMEMory:FSHAre [1 |2 | 3 |4][: AD DRess] <param> (Network File ...
3-79 Function Refere nce Save T races ( Save S etup Pa nel) Save Traces ( Save Setup Panel) Selects the trace s to b e save d. Se lect Save T r aces a nd the n se lect the i ndi vid - ual trac e(s ) or all t he c urren t trace d ata. See “ Savin g Measurement an d T race Data ” on pag e 2-20 Key Path Save/Recall > Save Menu > Save Traces ...
3-80 Function Reference Search Limit On/Off Search Limit On/Off When th e se a r ch lim it fu ncti on is on, all th e mark e r pe ak/p it sear ches w i ll apply only to th e rang e speci f ied by t he two wavel ength line m a rkers. Key Path Marker s > More Mark er Functi ons > Line Mark er Menu > A dv a n ce d Lin e Mkr Fu nctions > Se ...
3-81 Function Refere nce Select Pa th INT/ EXT Select Path INT/EX T For 86144B/8 6146B only . Allow s yo u to sele ct betw een in ternal (50 µ m) and exte rnal (9 µ m) fi ber . The dual fibe r out puts from th e monoc h rom at or allow th e inst rum e nt to have improve d resolut ion bandwid th and dynami c range when usin g the 9 µ m fiber . Th ...
3-82 Function Reference Set Time/Date An incr ease in sen sitiv ity may also re quir e a nar rower video b andw idth, w hich will slow the swee p spee d. N orm ally , the opti cal sp ec trum a naly zer s elec ts th e great est s ensiti vity possib le that do es not re quire am plificatio n changes dur- ing t he swe ep. If y ou man ually incre ase t ...
3-83 Function Refere nce Set T itle Set Title Accesses t he Title Setup pa nel to add a title to the disp lay . Use the so ftkeys t o chan ge o r se lect th e item s from the se tup pa n el. Refer to “ Adding a T itle to the Disp lay ” on page 2-19 Key Path System > Set T itl e Remo te Commands DISPla y[:WIN Dow [1]]:T EXT :DATA Show Criti c ...
3-84 Function Reference Show HW Errors Show HW Error s Open s a wind ow display ing hardware er rors. Y ou can print th e queue , cle a r the queu e, or pa g e up and d ow n to v i ew the in forma tio n. If no err ors ar e g en - erate d, t he fu nction will be shad ed. Key Path Syste m > Help > Show HW E rrors Rela ted Fun ction s Show Crit ...
3-85 Function Refere nce Show W arnings Show Warnings Opens a w ind ow di splaying warn ings. Y ou can print the queue, clear the queue, or page up and down to vie w the info rmation. If no warnings are gener- ated, the fu nction wi ll be shaded . Key Path Syste m > Help > Show Warn ings Rela ted Fun ction s Show Har dware Errors, Sh ow Criti ...
3-86 Function Reference Singl e Swee p Remo te Commands INSTrument: SELect Single Sweep Initiate s one sw eep of the measurem ent ra nge. Use thi s funct ion to update the disp layed measur ement data . Refer to “ Repeat Sweep ” on page 3-71 T rig ger con ditio ns mus t be met in order for a singl e sweep t o occur . The SWEEP i n dicat or ligh ...
3-87 Function Refere nce Sta r t WL If yo u inc rease t he s pan aro und a cen ter wa veleng th bey ond o ne of the end wavelength limit s, the center wavelength wi ll change to a val ue that will al low the s pan to increase. For exampl e, if the center wa veleng th is set to 168 0 nm and you increase the span to 100 nm, the center wave leng th ch ...
3-88 Function Reference Swee p Po int s Use th e kno b, ste p keys, or numer ic keys t o enter the desir ed valu e. If the instr ume nt is in zero sp an, th is comm and se ts the ce nter wav e length to the valu e spec i fied . The de fault for stop wavel ength is 1700 nm. Key Path Wavele ngth > Sto p WL Rela ted Fun ction s Span, Start WL , Cen ...
3-89 Function Refere nce Sweep Time Sweep Time Spec ifie s the amo unt of ti me re quir ed fo r t he i ns tru ment to sw eep the c urr ent measu re m en t range. Th e in strument auto matically se lec t s sweep ti mes based on coup l ing of the fol lowing instru ment setti n gs : • wavelength s pan • resolut ion b andw idth • video bandwidth ...
3-90 Function Reference Switch Path Auto Align Now Switch Path Auto Al ign Now For 86144B/86146B Fi lter Mode onl y . Switch es t o t he 9 µ m filter mode pat h and perf o r ms an Auto Align. T o ensure maximum amplitude accuracy , connect the 9 µ m fiber betwee n the monochro - mator outpu t and the pho todetecto r input and the n press Swit ch ...
3-91 Function Refere nce Switch Pat h No Auto Alig n Switch Path No Auto A lign For 86144B/86146B Fi lter Mode onl y . Selec ts the 9 µ m filter mo de path. Y ou shoul d sel ec t this fu n ct i on if the ins t ru- ment ha s not be mov ed, subj ected to temp eratur e chan ges >2 ° C , turned of f and w armed up f or at least an ho ur at the sta ...
3-92 Function Reference Take S weep Take Sweep For 86141B/86144B /86146B Filter Mode only . Initiates a sing le swe ep that upd ates the displ ay to show th e valid waveform data. Refer to “ Repe at Sweep ” on page 3-71 and to “ Single S weep ” on page 3-86 . Key Path Appl ’ s > Measur ement Modes > Filter Mode > Swit ch Path Aut ...
3-93 Function Refere nce T race C Ma th Of f When the numbe r of swee ps tak en i s le ss tha n t he cou nt, t he f ollow ing f or- mula is use d to calcu la t e the data : If t he nu mber of swee ps is greater t han or equa l to the count , the follo wing formu la is used to ca lculat e the data: Key Path Trac es > Av er agi n g Remo te Command ...
3-94 Function Reference Trac e In teg Trace Integ Calc ul ates total pow er . T otal powe r is the summatio n o f th e p o wer a t eac h trace point , nor maliz ed by the ratio of t he tr ace po int s pacing and the resolu- tion b andw i dth. Th e anal yzer can only calcu late the tota l pow e r of sing l e trace. For exampl e, if a tot al powe r c ...
3-95 Function Refere nce T r ace Off Set Remo te Commands CALCulate[1|2 |3|4|5|6 ]:MATH:S TATe CALCulate[ 1|2|3|4|5|6 ]:MATH:E XPRession:DE Fine TRACe :EXCHange Trace OffSet Offs ets th e active t race b y the user -spec ifi ed valu e. Key Path Traces > Trace Math Off > Remote Commands CALCulate[ 1|2|3|4|5|6 ]:OFFSet Traces Acces ses the m en ...
3-96 Function Reference Trigge r Mode, In ternal Remo te Commands [ SENSe]:POWer:RA NGe:LOCK Trigger Mode, Internal Sync h ro n izes the start of th e sw ee p to an interna ll y generated tri gger signal. Inte rnal trig geri ng ens u res con tinuou sly trigg ered s weeps with the s horte st delay b etween sweep s. See “ T riggering a Me asu remen ...
3-97 Function Refere nce User Pr ofi l e for Re m ote Sha r es Rela ted Fun ction s Pit E xcursio n, P eak E xcursio n, Ma rker Th resho ld Va lue Remo te Commands CALCulate:TH Reshold: STATe User Profile for R emote Sha res Accesses the use rn ame, pass wor d, and workgro up fields fo r acces s to your networ k. Us e th e alp hanu meric pad to co ...
3-98 Function Reference User S ource Mult i-Pt Align User Source Mul ti-Pt Align Adju sts t he me chan ical p ositi on of the inst rument ’ s internal optical compo- nents e nsuring amplitu de accu racy of your measureme nts. This f unction i s semi-aut omatic and ali gns equ a ll y space d points with in the sp an and b ui lds the curren t fiber ...
3-99 Function Refere nce User Wa v eleng th Cal Dat e Remo te Commands CALibration:AL IGn:E XTernal User Wavel ength Cal Date Shows the da te an d ti me of th e las t succ essf ul u se r -performed wave leng th cal- ibra tion. Key Path Wavele ngth > Wave leng th Setu p > User Wavele ngth Cal Da te Rela ted Fun ction s Wavele ngth Calibra t io ...
3-100 Function Reference View (t ra ce ) Key Path Bandwidth/Sweep > V ideo BW Rela ted Fun ction s Sensiti vity Remo te Commands [SENSe]:BA NDwidth |BWIDth: VIDeo:A UTO [SENSe ]:BANDwi dth|BWIDt h:VIDe o Vi ew (t race) Allo w s tr ace A , B , C , D , E, or F da t a to be v ie wed . View e d tr aces ar e not updat ed as s weeps o ccur un less the ...
3-101 Function Refere nce Wavele ngth Cal S etup Key Path System > Calibratio n > Wavel e ngth Cal Setu p Rela ted Fun ction s Wavele ng th > Calibration Remo te Commands CA Librate: WAVelength:DA TE? Wavelength Cal Setup See “ Cal ibrating W avele ngth Me asureme nts ” on page 2-14 . Acce ss es the fo l- lowin g: • calibr ation dat ...
3-102 Function Reference Wavele ng th Line Mkr 1/ 2 Signa l Sour ce Selec ts eit her an ex terna l sin gle wa velen gth si gnal sourc e or the in ternal cali- brat or as t he wavelen gth ca libra tion source. W avelength Referen ced In ( for exte rnal cali bration sou rce only) Selec ts air or vacu um f or th e cali b rat ion . If the in ternal cal ...
3-103 Function Refere nce Wa velength Offset Mkr 1| 2 Remo te Commands (Wa v ele ngth Line Marker 1):CA L Cu la t e[1 | 2 |3|4 | 5| 6 ]:M ARKer[1|2|3| 4] :SRA Nge: LOW er (Wavele ng th Line Marker 2):CA LCu la t e[1|2|3|4|5| 6 ]:M A RKer[1|2|3|4] :SRA Nge: UPP er (Swee p Li mit):SE NSe :WAVel engt h:SRAN ge:U PPer Wavelength Offset Speci f ie s the ...
3-104 Function Reference Wavelen gth Units Wavelength Units Sets th e di splay w avele ngth uni ts to n m, µ m, or An g. Angtrom (Ang) i s a unit of meas uremen t of wavel ength of light and other radi- ation equal to one te n- thou sandth of a micron or on e hun dre d-millio nth of a centi meter . Key Path Wavelengt h > Wavel en gt h Se tup &g ...
4 “ Informa tio n and Equipm ent Requ ir ed for the Confi guration Proces s ” on page 4-2 “ Settin g Up the OS A for Re m o te Opera tion ” on page 4-4 “ Connect in g to the OSA over the Networ k ” on p age 4-6 “ Using the Reflec tion X Emu lator to Run the Remote Front Pane l ” on page 4-7 “ Using the X Win 32 Emulator to Run the ...
4-2 Remot e Front Panel Operat ion Remote Fr ont P anel Remote Front Panel The Re mote Front Pa nel c apabil ity pr ovides a m eans to allow the f ront panel of the OS A to be operated re motely from a P C wit h an X W indo w in g emu lator or a UNIX worksta tion wit h X W indows. W i th th e except ion for upd ate time , whi ch is limi te d by the ...
4-3 Remote Fro nt Panel Operatio n Remo te F r ont P anel Domain Name System (DNS) Serve r IP Addr ess is use d to un iq uely iden - tify the l ocatio n o f a part icu lar server . A n IP a ddr ess is a set of fo ur de c im a l numbers , se par ated by perio ds, like 192.170. 130.215. W orksheet for your IT department Internet Proto col (IP) a ddre ...
4-4 Remot e Front Panel Operat ion Remote Fr ont P anel Setting Up the OSA for Remote Operation 1 From the O SA ’ s fro n t pa nel, pres s Sy stem > More System Functions > GPIB & Network Setup > Configur e Network . 2 When the Ne twork Conf iguration screen is disp layed, press Continue . The O SA wi ll now resta rt the op era ting ...
4-5 Remote Fro nt Panel Operatio n Remo te F r ont P anel OK . Press Yes i f th e a d dr ess is correct . 14 When prompt ed to enter addition al netwo rk par ameter s, press Yes . 15 Enter t he Sub networ k Mask and Gateway IP Ad dress then press OK . If the parame ters are correct , press Yes . 16 Enter the Domain Name Syst em and DNS Serv er IP A ...
4-6 Remot e Front Panel Operat ion Remote Fr ont P anel Connecting to the OSA over the Ne twork Y ou can rem a p th e OSA fro nt panel ov er the netw ork us in g a PC with an X windowing emu lator or a UNIX work station run ning X W indows. The following X win dowin g emulator s have been teste d to ensur e correct OSA remote front panel o pe ra t ...
4-7 Remote Fro nt Panel Operatio n Remo te F r ont P anel Using the Reflection X Emulator to Run the Remote Front Panel Below are the ba sic st eps for s etti ng up the R eflec tion X em ulator to r un th e OSA rem ote fron t panel . Ref er to the Reflection X docum e ntatio n for furth er infor matio n. 1 From the PC Start menu , loca te an d run ...
4-8 Remot e Front Panel Operat ion Remote Fr ont P anel a In the Cli e nt Conn ec t ion ar ea ( l eft sid e of th e window ) , selec t h pux.rxc . b In t he Met hod fiel d, selec t Telnet . c In t he Host Name field, select the name assig ned to the OS A. d In the Use r N ame fiel d, enter osaadm . e In the Pa ss word fie ld , ente r osa osa1 . f I ...
4-9 Remote Fro nt Panel Operatio n Remo te F r ont P anel Using the X Win 32 Emulator to Run the Remote Front Panel Below are the ba sic steps for s etting up the X W in 32 em ulator to r un the OSA remote fron t panel. Refe r to the X Win 32 documentation for fur ther in for ma- tion. 1 From the PC Start menu , cli ck X-Win32 > X Win Config . 2 ...
4-10 Remot e Front Panel Operat ion Remote Fr ont P anel 4 In the New Ses sion enter th e f o llow ing informat io n: a In th e Sess ion n ame field, enter a na me t o uni quely identi fy t he OSA . Note An advantage when using the X Win 32 emulator is that you can run mult iple X applic atio ns on your desk top i n sep arate w indo ws. Fo r thi s ...
4-11 Remote Fro nt Panel Operatio n Remo te F r ont P anel 5 From the PC , St art menu, cl ick X-Win 32 > X Wi n 32 . Y ou wil l notice that an X icon will appear in your wind o ws tray - - usually locate d in the lo wer rig ht -hand pa r t of yo ur di sp lay . 6 Click on the X ic on and se lect the desire d OSA ses sion to run the remot e front ...
4-12 Remot e Front Panel Operat ion Remote Fr ont P anel Using a UNIX Workst ation to Run the Remote Front Panel In order to a c c es s th e remo te front pa ne l fr om you r UNIX wo rk statio n, the X serv er must be s et up t o allow c onnect ion t o the OSA. xhost is the se rvice access contro l program wh ich allows this acces s for X W i ndows ...
4-13 Remote Fro nt Panel Operatio n Remo te F r ont P anel Note Once you ch anged t he pas sword, you will need t o reme mber it for future use. Y ou will not be able to access the remote front panel capabi li ties without the new password. 7 From the comm a nd pr om pt, type Enable and the n press Ent er . 8 When prompted , Enter the IP number for ...
4-14 Remot e Front Panel Operat ion Remote Fr ont P anel 10 When you ar e finished usin g the remote front pa nel, in the Map D ispla y window, type Disable . The OSA wil l reb o ot into normal mod e wi t h th e remot e fro n t panel turned off. The OSA d ispla y will clos e on the PC. ...
4-15 Remote Fro nt Panel Operatio n Remo te F r ont P anel Using the Remote Front Panel 1 In t he Map Displa y win dow, a Welc ome sc reen i s disp layed and yo u ar e give n three command choices, • Display acce sses a diagnos tic t ool t o show th e di splay parame ter setu p • Enable acc esses the r emote front p ane l. This comm and i s use ...
4-16 Remot e Front Panel Operat ion Remote Fr ont P anel 3 You can now use the r emote front pane l jus t like you would if you we re sit ting in fr ont o f t he OS A. R emem ber t o u se th e mai n me nu b ar to acce ss OSA functions and to enter data via the ke yb oar d numbe r key s. 4 When you ar e finished usin g the remote front pa nel, in th ...
5 Over view 5-2 Error Re porting Behavior 5-4 SCPI-De fined E rrors 5-5 OSA N oti ces 5-16 OSA W a rn ings 5-17 Appl ica t ion -S pecif ic W arning s 5- 29 OSA Status Errors 5-35 OSA Error s 5-36 Firmwa r e Errors 5-38 Status L isti ngs ...
5-2 Status Li stings Overv iew Overv iew This docume nt describ e s the stat us listing s of the Agile nt 8614 0B series opti - cal spe ctru m ana l yzer s. Sta tu s cond ition s for the o p tica l spe ctrum anal yz e r are grouped into c ategor ies. Error Indicates the inst rument is m alfunctio ning. Me asurem ent accuracy is probably affec ted. ...
5-3 Status List in gs Overv iew The fol lo wing ta b le list s the er ror num bers a nd the ir defin ition s. Number R ange Defini tion – 1 to – 999 Stan dard SCPI errors 1000 t o 2999 OSA noti ces 3000 t o 4999 Applica tion speci fic noti ces 5000 t o 7999 OSA warni ngs 8000 t o 9999 Applica tion speci fic warni ngs 10000 to 1199 9 OSA status ...
5-4 Status Li stings Error Re porting Beha vi or Error Reporting Behavior Erro rs ar e disp layed in an on-s creen dia log b ox. T o con tinue opera tion, the user mus t ackno wledg e the erro r by press ing a butto n. Status erro rs ar e disp laye d with a de scrip tive line in th e l ower -l eft co rner of the g raticu le. Im mediately p ress t h ...
5-5 Status List in gs SCPI-Defin ed Errors SCPI-Defined Errors Thes e e rro r mes sages and descr iptio ns were copied from th e S CPI 19 97 V ol- ume 2: Command reference . The sent ences en closed in bracke ts “ [] ” are copied fro m the e rror descr iptions in the SC PI ref erence. References a re a lso made to IE EE 488.2 s ections fo r fur ...
5-6 Status Li stings SCPI-Defi ned Errors Contact: The I nstit ute o f Elec trica l and Elec troni cs En gineer s, Inc. 345 East 47th Str eet New Yor k, New York 100 17-2394 Phone: (800) 678 -I EE E (US) 8 a.m. – 4:30 p.m. (E ST) (908) 981-1393 (Int ernat ional) Fax: (908) 981-9667 Standard SCPI er rors (–1 to –9 99) All pos it ive numbers ar ...
5-7 Status List in gs SCPI-Defin ed Errors lis tening format s or whose type is unaccep table to the de vice. • An un recogn ized head er was received. Un recog nized h eaders i nclude inco rrect device-specific heade rs and incorrect or unimplemented IE EE 488.2 common commands. • A Group E xecute T rigge r (GET) was e ntered in to the input b ...
5-8 Status Li stings SCPI-Defi ned Errors – 108 desc = “ Parameter n ot allowe d ” help = ““ [More paramet er s were received than expecte d for the header; for example , the *EMC common comma nd onl y accepts one paramet er, so recei vin g *EMC 0,1 is not allo wed.] – 109 desc = “ Missing paramet er ” help = ““ [Fewer par amet ...
5-9 Status List in gs SCPI-Defin ed Errors – 128 desc = “ Numeric data not al lo wed ” help = ““ [A le gal numer ic da ta elem ent was r eceived, but t he devi ce does not ac cept one in this position f or the head er.] – 131 desc = “ Inva lid suffi x ” help = ““ The suffix does no t follow the synt ax descr ibed in IE EE 488.2, ...
5-10 Status Li stings SCPI-Defi ned Errors – 161 desc = “ Inva lid block d ata ” help = ““ [A bloc k data elemen t was ex pected, but was inval id for s ome reason (see IEEE 488.2, 7. 7.6 .2); fo r exa m ple , an END message was rece ived befor e t he le ngth was satisfied.] – 168 desc = “ Block data not allowe d ” help = ““ [A ...
5-11 Status List in gs SCPI-Defin ed Errors Execution err ors An <error/event number> in th e range [ – 299, – 200] indicate s that an error has been de te cte d b y the i ns tru men t ’ s executio n con tro l blo ck. Th e oc curr enc e of any error in this class shal l caus e the e xecutio n err or bit (bit 4 ) in t he event status reg ...
5-12 Status Li stings SCPI-Defi ned Errors – 222 desc = “ Data out of range ” help = “ A numeric value was entered whi ch is out si de the lega l r ange of values for the parameter . The name of the par ameter i s list ed at the end of th e error message. ” [Indica tes that a legal pr ogr am data eleme nt was par sed but could not be exec ...
5-13 Status List in gs SCPI-Defin ed Errors Device-speci fic errors An <erro r /e v en t n umb er > in the range [ – 399, – 300] or [1, 32767 ] indicates the instr ument has de tecte d an e rror wh ich is not a com mand erro r , a qu ery error , or an execution error; so me dev ice o perat ions d id not pr operly comp lete, pos- sibly due ...
5-14 Status Li stings SCPI-Defi ned Errors 488.2, se ction 11. 5.1) to b e set. Events tha t gene rate de vice-specifi c errors shal l no t g en er a te comma n d er rors, executi on er rors, or query err o rs ; see the othe r error d efinit ions in t his sect ion. Query errors An <err or/event numbe r> in t he ra nge [ – 49 9, – 400] ind ...
5-15 Status List in gs SCPI-Defin ed Errors Table 5-4. Query Er rors Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] – 400 Q uery e rror [This is the gene ric query error f or devices that canno t detect more speci fi c errors. This cod e ind icates only th at a Q uery Err or as d efined in IEEE 488. 2, 11.5.1.1. 7 and 6 ...
5-16 Status Li stings OSA Notic es OSA Notices System co ntrol -related e rror mes sages or wa rnings The OS A sy stem ch a n ged a se tti ng and ge nerat ed a warn ing that the oper a- tion was perf orm e d. Table 5-5. System Co ntrol Errors or Warnings Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 1000 desc = “ Sensi ...
5-17 Status List in gs OSA W arnings OSA Warnings Table 5-6. OSA Warnings ( 1 of 12) Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 5000 desc = “ Aut oMeasure cannot find an input si gnal ” help = “ The au to-measure pro cedure can not find a us able inp ut s ignal. Make sure you have a sig nal connecte d to the opt ...
5-18 Status Li stings OSA Warn ings 5005 desc = “ Cal abort ed: am plitude correc tion too large ” help = “ An a mplitude calibrat ion was request ed. The calibrat ion was a borted since the correct i on needed is more than +3dB or less than – 10d B. M ake su re you have done an Auto- Align prior to ca librati on. If the ampl itude e rror i ...
5-19 Status List in gs OSA W arnings 5012 desc = “ Th e flop py disk is not f ormatted ” help = “ An operati on was requested whi ch uses the floppy di sk. The disk currentl y in t he drive does not appear to be f ormatted. Use the format utility t o format the disk or replace it with a formatted disk. ” 5013 desc = “ Th e flop py disk is ...
5-20 Status Li stings OSA Warn ings 5032 – 5043 desc = “ I/O Error ” help “ An unexp ected error occurred duri ng the I/O oper at io n. Pleas e try the operation again. If the operatio n involv es the flop py dis k drive, try a di fferent floppy disk. If the error per si sts, please make a not e of th e error number and contact the ne arest ...
5-21 Status List in gs OSA W arnings 5049 desc = “ Wro ng marker X axis uni ts for active tra ce ” help = “ The active mar ker can not be placed on the active trace bec ause the desired X axis uni ts do not matc h t he X axi s units of the act i ve trace. T his is normally caused by recalli ng a wavel ength trace in zero span or a zero span t ...
5-22 Status Li stings OSA Warn ings 5055 desc = “ Fir mwar e Up gr ade was not succ essful ” help => “ A fi rmware upgrad e operat ion was request ed. The firmware upg rade operation cannot be d one at thi s time due to an interna l softwa re problem. “ + <- .servic eCent erHelp 5056 desc = “ Tra jectory ali gn cann ot find input si ...
5-23 Status List in gs OSA W arnings 5062 desc = “ ADC Tr ig gered Swe ep Too Fast ” help = “ A sweep was taken with one of the ADC trigge r modes enabled . The sweep rate was too fast to allow t race data to be acqu ired for every wavelengt h. To resolve this pr obl em increase sweep time or incr ease t he frequency th e ext er nal trigger i ...
5-24 Status Li stings OSA Warn ings 6700 desc = “ Ma th expressi on inpu t para meter undef ined. ” help = “ A math expressi on coul d not be evalu at ed beca use one or more input arguments a re u ndefined. Please check t he spell ing of al l inpu t argument s. ” 6701 desc = “ Ma th expressi on inpu t para meter has error. ” help = “ ...
5-25 Status List in gs OSA W arnings 6725 desc = “ Tra ce lengths do not mat ch. ” help = “ A math expressi on coul d not be evalu at ed beca use the inputs have differin g sizes (trace length s). All inputs to this function must be of the same size. ” 6726 desc = “ Tra ce lengths do not mat ch. ” help = “ A math expressi on coul d no ...
5-26 Status Li stings OSA Warn ings 6733 desc = “ Invalid co mbinat ion of Y axis unit s ” help = “ A math expressi on could not be eva lu ated because of an in valid combination of Y axi s units. Th e math operati on bei ng performed only allows one of the argume nts to have unit s. All other ar guments must be unitless. The math operato r i ...
5-27 Status List in gs OSA W arnings 6742 desc = “ Reque sted amplit u de not found ” help = “ A math expressi on to search for a speci fic amplit ude i n a trace did not succeed. Ther e ar e no t r ace points with the desire d am pli tude. ” 6744 desc = “ Ex cur s i on should be in dB ” help = “ The unit s f or the excursi on ar e no ...
5-28 Status Li stings OSA Warn ings 6753 desc = “ Th e wind ow specifie d is invalid . ” help = “ The windo w sp eci fi ed i s invali d. The wi ndow should be a co nst ant . ” 6754 desc = “ Sear ch faile d: no data ” help = “ A marker searc h operation was r eque sted. After cli ppi ng the trace data to screen limi t s and li ne marke ...
5-29 Status List in gs Applic ation-Sp ecific War nings Application-Specific Warnings Tabl e 5- 7 . App lic at ion- Spec if i c War n i n gs (1 of 6 ) Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 8001 desc = “ Incor r ect appli cation t ype i s listed in spec file. ” help = “ The appl ica tion expect s t he first ...
5-30 Status Li stings Applica tion-Spe cific Wa rnings 8006 desc = “ Th e speci ficat ion file cannot be impor ted. ” help = “ An error occurred while trying to import the specifi c atio n file. Refer to the prev ious warnin gs for more informati on on spec ific errors i n the specifi cation fi l e. ” 8007 desc = “ Th e speci ficat io n f ...
5-31 Status List in gs Applic ation-Sp ecific War nings 8014 desc = “ Pri nt statement ig nored: no pat h is specifie d ” help = “ The PRINT stateme nt needs to be aft er a PAT H statement to in dicate which PA TH data is to be p rinted. The P RINT s tatement at the line number specifi ed came be fore any PATH stat emen t. This PRIN T st at e ...
5-32 Status Li stings Applica tion-Spe cific Wa rnings 8021 desc = “ Th e spec f il e cou ld not be found. ” help = “ The a pplicat ion tr ied to lo ad a specif icatio n file which c ould no t be foun d in the inte rn al memory. Th is may ha v e occ ur r e d if the la s t file us e d by th e applicat i on was deleted. The f i lename is specif ...
5-33 Status List in gs Applic ation-Sp ecific War nings 8028 desc = “ A mi nimum non- zero sp an is r equired . ” help = “ The appl ica tion cannot r un in a zero span set t ing . The start and stop wavelength mu st b e separated by a minimum span. The line n umber in dicates the line i n the spe cificat ion fil e which had a start an d stop ...
5-34 Status Li stings Applica tion-Spe cific Wa rnings 8035 desc = “ The search limit s ar e out s i de t he SETUP rang e. ” help = “ The search li mits for stat ement s l ike PEAK or CENTER _OF_MAS S must be within the st art and stop val ue s of the SETU P sta tement. T he li ne nu mber indicat es whi c h st at ement has values out of rang ...
5-35 Status List in gs OSA Statu s Errors OSA Status Errors Tabl e 5- 8. OSA S tat us Err ors Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 10000 desc = “ Sw eep U ncal ibrated ” help = “ The current sett ing of s weep time may be too fa st. This could res ult in a n invalid measurement. In certain case s it is pos ...
5-36 Status Li stings OSA Errors OSA Errors Table 5-9. OSA Errors ( 1 of 2) Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 20001 desc = “ Error detec ted in ADC sub-system ” help = “ An error has been detec ted in the Anal og-to-D igital converter subsystem. Pl eas e record the hexa decimal number li sted with the e ...
5-37 Status List in gs OSA Errors 20005 desc = “ Tra ns-Impedan ce calib ration da ta is inval id ” help = “ Factory cali bration dat a f or the trans -imped ance amplif ie r is invali d. Please record the hexade cimal number list ed with the er r or and cycl e power. If the error per s is ts, contac t the nearest Agi l ent Technol ogi es Ins ...
5-38 Status Li stings Firmware Errors Firmware Errors Table 5-10. Firmware Er rors Error N umb er E r ror Descrip tion [descriptio n/ explanation /examples] 30000 desc = “ Int er nal Commu nicat io ns Er ro r ” help = “ An internal so ftware error has occu rred involving co mmunications between differ ent softwar e pr oce sses. Ple ase r ecor ...
6 Chan ging the Printe r Paper 6-2 Cleaning Connecti ons for Accurat e Measu remen ts 6- 8 Return ing the Ins trumen t for Servi ce 6-21 Maintenance ...
6-2 Maintenance Chan gi ng th e Prin ter Pa per Changing the Printer P aper ...
6-3 Main tenance Changi ng the Prin ter Pape r CAUTIO N A void droppi ng the coin or screwdri ver , used to open the printe r door , into the print er asse mbly . CAUTIO N Alway s use Ag ilent bran d paper to ensure quality printin g and lo ng printer l ife. Order pape r as Agil ent part nu m ber 927 0-1370. CAUTIO N Neve r us e the print er withou ...
6-4 Maintenance Prin ter H ead Clea ning P roced ure Printer Head Cleaning Procedure Lint fr om n ormal us e of the pri nter may eventua lly co llec t on th e pr inter head and degrade pri nt qualit y . Use th e proce dur e provid ed in this secti on to clean the print er head. Al so re fe r to “ Chang ing the P ri nter Pape r ” on p age 6 -2 . ...
6-5 Main tenance Printer Head C leaning Pr ocedur e Figure 6-1. Example of a static-safe workstation To clean th e printer head Table 6-2. Printe r Accessori es 1 Turn off th e Agilen t 86140B seri es optic al spectru m analyzer, and rem ove the line p ower cord . 2 Plac e th e in st rument at a stat ic-safe work st a t io n as describ ed in th e i ...
6-6 Maintenance Prin ter H ead Clea ning P roced ure CAUTIO N A void droppi ng the coin or screwdri ver , used to open the printe r door , into the print er asse mbly . 4 Lift up the p ape r latch as sho wn in the fol l o wi ng di ag ram, and remo ve the paper. 5 Unscrew t he retaining screw th at secures the s heet-metal cover that pro tects the p ...
6-7 Main tenance Printer Head C leaning Pr ocedur e 7 Clean the p rinte r head us ing a cot ton s wab an d iso propy l alc ohol . CAUTIO N Use of oth er cle aning ma ter ials or flui ds may damage t he prin ter . 8 After the printer h ead ha s tho rough ly dr ied, use t he pri nter h ead lever to retu rn th e prin ter h ead to its original positi o ...
6-8 Maintenance Clea ning Co nnection s for Ac curate Me asur ements Cleaning Connections for Accurate Measurements T oday , advance s in measuremen t capabilities make conne cto rs and connec- tion techn iques mo re imp ortant tha n ever . Damage to the co nnecto rs on cali- bration and verifi cati on devic es , test ports, cables , and ot her dev ...
6-9 Main tenance Clea ning Co nnection s for Accurat e Measur ements • Is an instrument- grade conn ector with a precis ion core al ignment req uired? • Is r epeatabil ity tole rance for reflecti on and lo ss im portan t? Do your spec ifica - tion s take repeatabil ity uncerta inty into a ccount ? • Will a connector de grade the re turn loss ...
6-10 Maintenance Clea ning Co nnection s for Ac curate Me asur ements Figure 6-3. Universal adapters to Diamond HMS-10. The HM S- 10 enc a se s the fi be r withi n a so ft nickel silve r ( C u/ N i/Zn ) ce nte r which is sur rou nded by a toug h tun gsten carbid e casing, as shown in Figure 6-4 . Figure 6-4. Cross-section of the Diamo nd HMS-10 con ...
6-11 Main tenance Clea ning Co nnection s for Accurat e Measur ements The so f t c o re , while allowin g precise cen t er ing, is also th e c h ief liabilit y o f th e conne ctor . The s oft mat erial i s easily d amaged. Care must be taken to m ini- mize exces si ve scratchin g a nd we a r . While mino r w ea r is not a prob lem if th e glas s fa ...
6-12 Maintenance Clea ning Co nnection s for Ac curate Me asur ements Use the fol lowing guideli nes to achieve t he best poss ibl e performanc e w he n making measur em e nt s on a fibe r -op tic system: • Never use metal or sharp objects to cl ean a connect or and neve r scr ape the connector. • Avoi d matching g el a nd oi ls. Figure 6-5. Cl ...
6-13 Main tenance Clea ning Co nnection s for Accurat e Measur ements Figure 6-7. Damage from improp er cleaning. While t hese often w ork wel l on fi rst in sertion , they are g reat dirt magn ets. The oil o r gel grabs and h olds grit t hat is then grou nd into th e end of the f iber . Also, som e early ge ls w er e de si gned fo r us e wit h the ...
6-14 Maintenance Clea ning Co nnection s for Ac curate Me asur ements • Keep co nnectors covered when no t in use. • Use fus ion sp lices on the m ore p erma nent cri tica l node s. Choos e the best con- nector possi ble. Replac e con necti ng cab les reg ularl y. Fr equent ly mea sure t he return los s of the connecto r to check for de gradati ...
6-15 Main tenance Clea ning Co nnection s for Accurat e Measur ements V isu al inspection of fiber ends Vi su al in spe cti on of f ibe r end s can be hel p ful. Cont am inat io n or i mpe rfec tio ns on the c ab le end fa c e ca n b e de te cted as w e ll as cr a ck s or chip s in the fi b er itself. Use a micros cope (100X to 200X mag ni fi c ati ...
6-16 Maintenance Clea ning Co nnection s for Ac curate Me asur ements T o clea n a non-l ensed conne cto r CAUTIO N Do not u se any type of foam swab to cl ean optical fiber end s. Foam swabs can leave film y de pos its on fiber e nds that can degrade per for mance. 1 Apply pur e isoprop yl alcohol to a cle a n li nt -free cot ton swab or len s pap ...
6-17 Main tenance Clea ning Co nnection s for Accurat e Measur ements If t he per forman ce, after the initi a l clean ing, s eems poor tr y cleaning the con- nector ag ain. Ofte n a se cond clean ing wi ll restor e pr oper pe rformance. The second cleaning should be more ardu ous with a scrubbing action. T o clean an adapter The fibe r -o pti c in ...
6-18 Maintenance Clea ning Co nnection s for Ac curate Me asur ements Care of Connector Savers The conn ector saver is us ed to protec t the input connector of t he OSA from damage. It fun ctions as a stando ff between the fron t panel input connecto r and the input fiber . If the f ibers are not thoro ughly cleane d, rep eated co nnec- tions can r ...
6-19 Main tenance Clea ning Co nnection s for Accurat e Measur ements Cleaning Conn ector Savers The two ends of the connecto r saver sh ould be clea ned differe ntly . The ferrule fiber end of th e con nector sa ver can be clean ed in the same man ner a s a fi ber patch c ord, or a cable , using th e method descri bed below . The rec essed fiber e ...
6-20 Maintenance Clea ning Co nnection s for Ac curate Me asur ements To clean the recessed end of the connector saver • To cle a n th e recessed en d o f the co nn ec t or saver, it is re commended that a wrapped ti p swab or stick cleane r be used. Berkshi re ’ s LT670183 wrapped tip cotto n swab, or Clet op stick clean er s have prov en to b ...
6-21 Main tenance Returning the In stru ment for Se rvice Returning the Instrument for Service Agile nt T echn olo gies aims to m aximi ze th e v alue you rece ive, w hil e mini mizing y our r isk an d pro blems. W e str ive t o ens ure tha t you get t he tes t and measur em e nt capabilitie s yo u paid for and ob tai n the sup port you need. Our e ...
6-22 Maintenance Returni ng the Instru men t for Se rvi ce Latin America (tel) (305) 269 7500 (fax) ( 30 5) 26 9 7 599 Canada (tel) 1 877 894 4414 (fax) ( 90 5) 20 6 4 120 Australia (tel) 1 80 0 62 9 485 (fax) ( 61 3) 92 10 594 7 Europ e (tel) (31 20) 547 2323 (fax ) (31 20) 547 23 90 New Zealand (tel) 0 80 0 73 8 378 (fax) 64 4 495 89 50 Japa n (t ...
6-23 Main tenance Returning the In stru ment for Se rvice Preparing the instrument for shipping 1 Writ e a co mple te de script ion o f the fail ure a nd att ach it to the i nstrum ent. Includ e any s pecifi c perf orman ce deta ils rel ated to the pro blem. T he foll owing infor matio n sho uld b e r eturn ed wi th th e inst rume nt. • Type of s ...
6-24 Maintenance Returni ng the Instru men t for Se rvi ce 3 Pack the instr ument in the origi nal shi pping conta iners . Ori ginal mat erial s are availa b le thro ug h any Ag il ent T echnol ogies offic e. Or , use th e follo win g guid elin es: • Wrap t he inst rument i n antist atic pla stic t o reduce the pos sibilit y of dama ge caused b y ...
7 Defini ti on of T erms 7-3 Specificati ons 7-5 Additio nal Spec ificati ons – Ag il e nt 8614 4B/86146B 7 -1 4 General In strume nt Spe ci fi cations 7-11 Option 001 Cur re nt Sou rce 7- 16 Option 002 Wh ite Light Source 7-17 Option 004/ 005 EELED Sour ces 7-18 Regulato ry In forma tion 7 -21 Declaration of Conformity 7-2 2 Specifications and R ...
7-2 Specific ations an d Regu latory Inform ation Specifica tions and Regul atory Info rmation Specifications and Regulatory Information This chapter cont ains specifi c ati ons and characteris ti cs for Agilent 8614xB opti c al sp ectrum analyzers (OS A). • The spe c if ications in th is chapter apply t o all funct io n s a utoc ou p led over th ...
7-3 Specifi c at i ons and Regulat ory Infor m at ion Definitio n of T e rms Definition of Terms Charac teristi cs and specific ations Th e distin ction b etwee n spec ificati ons and characterist ics is descr ibed as fo l- lows : Specific ations descr ib e wa r ranted perf orm anc e. Character istics prov ide usef ul, b ut nonwa rrant ed inf ormat ...
7-4 Specific ations an d Regu latory Inform ation Definition of Terms Ampl itu de Scale Fidelity refers to the po tential errors in a mplitu de rea dout at ampli- tude s other t han at the calib ration poin t. Th is spe c ificatio n is s ometime s calle d line a ri ty . Flatn ess define s a float i ng band w h ich describe s the erro r in signal am ...
7-5 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Specifica tions NOTE The 86144B and 86146B specifications are for the 50 µ m in ternal p ath on ly . Table 7- 1. Wavele ngth Spec ifications Wave le ngt h Ra nge 600 nm to 1700 nm ± 0.002 nm 0.2 nm to ful l range and zero span ± 0.01 nm ± 0.025 nm ± 0.01 nm ± 0.2 n m ±0.5 ...
7-6 Specific ations an d Regu latory Inform ation Specif ications Table 7-2. Resol ution Ban dwidth (RBW) S pecificat ions Resol u tion Bandw idth (RBW) Agilent 86 140B , 86142B, 86143B, 86145B Agile nt 86144 B, 86146B a a. The 861 44B and 86 146B sp ecificati ons a re for t he 50 µ m int ernal path only. Agilen t 86141B, 86140B w/O pt 025, 86143B ...
7-7 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Table 7-3. Amp l itu de Sp ecificatio ns Ampli tude Agilen t 8614x B a Sensitivity b 600-75 0 nm c , d 750-90 0 nm c.d 900-12 50 nm c 1250-1 610 nm c 1610-1 700 nm e – 60 dBm – 75 dBm – 75 dBm – 90 dBm – 80 dBm Maximum M easurem ent Power f , g 1525-1 700 nm 600-10 00 n ...
7-8 Specific ations an d Regu latory Inform ation Specif ications Agilent 86 140B , 86143B, 86144B Agil ent 8 6142B, 86145B, 86146B Agilen t 86141 B, 86140B W/ O pt 025, 86143B w/O pt 025 Flatness k 1290-1 330 nm 1525-1 570 nm 1525-1 610 nm 1250-1 610 nm l ----- ± 0.2 dB ----- ----- ± 0. 2 dB ----- ± 0. 2 dB ± 0. 7 dB ----- ± 0. 2 dB ----- --- ...
7-9 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Table 7- 4. Dynamic Range Specificatio ns Table 7-5. Mon ochromator Input Spec ifi c a tions Agilent 86140B , 86143 B, 86144B a Ag ilent 8614 2B , 861 45B, 86146B a a. The 861 44B and 86 146B sp ecificati ons a re for t he 50 µ m int ernal path only. Agilen t 86141B and 86140B O ...
7-10 Specific ations an d Regu latory Inform ation Specif ications Table 7-6. Swe ep Specificat io ns Table 7-7. Pulse Mode Ac curacy Specific ations Swee p Agilent 86 14xB a a. The 861 44B and 86 146B sp ecificati ons a re for t he 50 µ m int ernal path only. Maximum S wee p Rate b b. Char acter istic 40 nm/56.3 ms Maximum Sampling Rate in Zero S ...
7-11 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Table 7-8. Gener al Instrument Specif ications Agile nt 8614 0B, 861 41B and 86142B , 86146B B encht op Agilent 86143B , 86144B, and 8614 5B Port able Dimens ions 222 mm H × 425 mm W × 427 mm D (8.8 in × 16 .8 i n × 16.8 in ) 163 mm H × 325 mm W × 427 mm D (6.4 i n × 12.8 ...
7-12 Specific ations an d Regu latory Inform ation Specif ications Additional Specifications fo r the 86141B WAR NI N G The li ght e mitted from the MONO CH ROMA TO R I NPUT connecto r is filtered and sli ghtly at tenuat ed li ght in put to the fr ont-p anel MONOCHROMA TOR INPUT c onnecto r. Ligh t ca n radiat e fro m the front pa nel i n the follo ...
7-13 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Chara cterist ic M onochr omator Loss a. Seco nd orde r is selec ted whe n the stop wavelength is at or b elow 9 00 nm a nd resoluti on i s <10 n m b. With ap plied inp ut fi ber t hat is standa rd single mode at wavelength of interest . c. A t room temper atur e. d. Char act ...
Agilent 861 44B/86146B Additional Specifications WAR NI N G The li ght e mitted from the MONO CH ROMA TO R I NPUT connecto r is filtered and sli ghtly at tenuat ed li ght in put to the fr ont-p anel MONOCHROMA TOR INPUT c onnecto r. Ligh t ca n radiat e fro m the front pa nel i n the followi ng instrument mo des: filter mode, e xternal path, and st ...
7-15 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Table 7-12. Filter Bandwidth Adjace nt Chan nel Rejectio n ( at 1550n m) a a. Char acter istic Agilen t 86146 B Agilent 861 44B 12.5 GHz 25 GHz 50 GH z 100 GHz 50 GH z 100 GHz ±0.1 nm ±0.2 nm ±0 .4 nm ±0.8 nm ±0.4 nm ±0.8 nm 0.04 nm 40 dB 50 d B 55 dB 55 dB 50 dB 50 d B 0. ...
7-16 Specific ations an d Regu latory Inform ation Specif ications Table 7-13. Option 001 Current Source Current Ou tput Agilen t 86140B , 86141B , 86142B, 86 146B Only Range 0 to ± 2 00 mA (source or sink) Resolu tion a a. Char acter istic 50 µ A steps Accuracy 2% ± 50 µ A Clamp Volt ag e b b. Nomi nal ± 2.7V Noise Den sity at 1 kHz a <4 n ...
7-17 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Table 7-14. Option 002 White Ligh t Source Agile nt 8614 0B, 861 41B , 86142B, 86146B onl y Wavele ngth a a. F ilter ed be l ow 85 0 n m. 900 nm to 1700 nm Minimum Out put Po wer Spectr al Den sity b 900 to 1600 nm 900 to 1600 nm (typical ) 1600 to 170 0 nm b. With ap plied inp ...
7-18 Specific ations an d Regu latory Inform ation Specif ications Table 7-15. Option 004/005 EELED Sources Agilent 86140B, 8614 1B, 861 42B , 86146B onl y Minimu m Spectr al P ower Density 1540 to 156 0 nm - option 005 1470 to 162 0 nm - option 005 a 1300 to 132 0 nm, 1540 to 1560 nm - opt ion 004 1250 to 162 0 nm - option 004 a a. Char acter isti ...
7-19 Specifi c at i ons and Regulat ory Infor m at ion Specif ications Option 006 Wavelength C alibrator The wavelength calibrator option pro vides an onboard wave le ng th reference that c an be us ed to a utoma tica lly cal ibra te the optic al spe ctru m analy zer . The calibr ator is based o n an EE LED and an Acetylen e gas absorpt io n c el l ...
7-20 Specific ations an d Regu latory Inform ation Specif ications Table 7-16. Additional Parts and Accessories Agilent Benchtop OS A 86140B, 8614 1B, 86 142B , 86146B Agilent P ortable OSA 86143B, 861 44B, 86145 B Printe r Paper (5 rol ls/box) 9270-1370 9270-13 70 Addition al Co nnector Interfaces See Agi lent 8 1000 ser ies See Agil en t 81000 se ...
7-21 Specifi c at i ons and Regulat ory Infor m at ion Regula tor y Informatio n Regulatory Inf ormation • Laser C las sific ati on: This pr oduct co nta i ns an FDA La se r C las s I (IEC Lase r Class 1) laser. • This product com pl ies with 21 CFR 1040. 10 and 1040.11. • This pr oduct has bee n designed and tes t ed in acc o rdance wit h th ...
7-22 Specific ations an d Regu latory Inform ation Declara tion of Conformity Declaration of Conformity ...
Index- 1 Index A absolute accuracy , 7- 3 accessories product , 1-8 static-safe , 6-4 accuracy absolut e/differen tial , 7-3 active functio n area a ssist , 3-24 Active Funct ion A rea A ssist , 3-2 active function area, mo ving , 2-12 , 3-46 Active Marke r softkey , 3-3 Active Ma rke r. ... so ftke y , 3-58 Active Trace softkey , 3-3 adapters , 1- ...
Index -2 Index wavelength calibration , 3-101 date, s ettin g , 3-8 2 dB per division , 3-79 declaration of conformity , 7-22 default instrument settings , 3-65 Defau l t Math softkeys , 3-20 , 3- 21 Delete Menu softkey , 3-21 delta between traces , 2-28 delta marker , 1-15 units, setting , 3-40 Delta M arker s oftkey , 3-22 display adding a title ...
Index- 3 Index backup/restore , 2-20 saving data , 2-22 , 3-77 intern al prin ter , 3-67 intern et prot ocol , 4-2 interpolation, normal/delta marker , 3-40 IP address , 4-2 L laser classifications , 1-29 safe ty , 1-29 warning , 1-29 laser classification , 7-21 Lin Math softkeys , 3-34 line mark ers , 3-1 02 Line Markers Off softkey , 3-3 3 lo gai ...
Index -4 Index non-normalized amplitude scale , 3-3 normal marker , 1-15 units, setting , 3-40 normal/delta marker interpolation , 3-40 norma lized display scale , 3-3 number of points, swee p , 3-88 O opera ting sy stem re vision , 3-73 optimi ze se nsitivit y , 3-12 Options menu , 1-17 P package contents , 1-8 packaging for shipment , 6-24 panels ...
Index- 5 Index measurement /trace save , 3-74 save to , 3- 78 save traces , 3-79 save, fast mode , 3-26 save/recall functions fast recall , 2-24 fast save , 2-20 internal memory backup/restore , 2-20 recalling data , 2-2 4 saving data , 2-21 Save/Recall key , 3-78 Save/Recall menu , 1-24 saves , 2-3 scale fidelity , 7-4 Scale/Div softkey , 3-79 scr ...
Index -6 Index U Update On/Off softkey , 3-95 update trace , 3-96 upgrading the firmware , 3-30 user power cal date , 3-8 wavelength calibration date , 3-101 User Share , 3-31 User Share Ident ity , 3-97 User Wa veleng th C al Date s oftkey , 3-99 V View Trace softkey , 3-10 0 W wavelength calibration date , 3-101 referenced value , 3-102 setting c ...
Agilent Technologies 86140Bのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 86140Bの取扱説明書
- Agilent Technologiesの製品カード
- パンフレット
- またはAgilent Technologies 86140Bの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Agilent Technologies 86140Bの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Agilent Technologies 86140Bの取り付け説明書、サービスマニュアル、簡易説明書、またはAgilent Technologies 86140Bのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Agilent Technologies 86140Bの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Agilent Technologies 86140Bデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAgilent Technologies 86140Bを使用するのを助ける技術的文書のことです。説明書は通常、全てのAgilent Technologies 86140Bユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Agilent Technologiesの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Agilent Technologies 86140Bの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAgilent Technologies 86140Bの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Agilent Technologies 86140Bに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Agilent Technologies 86140Bデバイスの基本機能を使うにあたってのヒント。 Agilent Technologies 86140Bのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Agilent Technologies 86140Bに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAgilent Technologies 86140Bのメーカー/サービスへの連絡先に関する情報。
Agilent Technologies 86140Bについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAgilent Technologies 86140Bの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAgilent Technologies 86140Bで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。